SEM CPM Drilldown does not work

In sem CPM, when selecting a value of filter in drilldown of a frame of SEM CPM does not update the graph.
Some idea?
Thanks.
Jorge

Hi,
I don't know if the solution is as easy for you but :
I did have the same problem with my frames... the problem was that (in the web version) <b>after having selected a value</b>, I had to click on the "<i>V</i>" on the bottom-right of the screen to update the graph according to my selection.
I hope it helps.

Similar Messages

Minetest translation does not work on my machine.

Hey there.
After trying my luck in the official Minetest forums a week ago and got nothing more than the initial “try this-and-that” thing as response in the German discussion section and no reply at all in the regular discussion section I decided to ask on Reddit on last Saturday afternoon, too. On Reddit my question only got 3 upvotes and no comments.
Since no-one seems to know what’s going on I decided to post my question here, too.
It sems like the translation feature in Minetest does not work on my machine for unknown reason.
The language files are there and according to it’s oputput and the PKGBUILD Minetest was compiled with gettext support. LANG and LC_MESSAGES are properly set (I even tried LC_ALL). Localization works properly in all other applications that support localization.
Here’s some relevant system information.
$ uname -rms
Linux 3.16.1-1-ARCH x86_64
$ minetest --version
Minetest 0.4.10
Using Irrlicht 1.8.1
Build info: VER=0.4.10 BUILD_TYPE=Release RUN_IN_PLACE=0 USE_GETTEXT=1 USE_SOUND=1 USE_CURL=1 USE_FREETYPE=1 USE_LUAJIT=0 STATIC_SHAREDIR=/usr/share/minetest
$ pacman -Ql minetest | grep locale/de
minetest /usr/share/locale/de/
minetest /usr/share/locale/de/LC_MESSAGES/
minetest /usr/share/locale/de/LC_MESSAGES/minetest.mo
$ locale
LANG=de_DE.utf8
LC_CTYPE="de_DE.utf8"
LC_NUMERIC="de_DE.utf8"
LC_TIME="de_DE.utf8"
LC_COLLATE="de_DE.utf8"
LC_MONETARY="de_DE.utf8"
LC_MESSAGES="de_DE.utf8"
LC_PAPER="de_DE.utf8"
LC_NAME="de_DE.utf8"
LC_ADDRESS="de_DE.utf8"
LC_TELEPHONE="de_DE.utf8"
LC_MEASUREMENT="de_DE.utf8"
LC_IDENTIFICATION="de_DE.utf8"
LC_ALL=de_DE.utf8
$ cat /etc/locale.gen
de_DE.UTF-8 UTF-8
en_DK.UTF-8 UTF-8
en_US.UTF-8 UTF-8
According to the discussion in the German discussion section in the Minetest forums I tried to set language = DE (and variants like de_DE with or without .utf8 in all possible variants) in minetest.conf but it didn’t change anything. Also: Here’s the output of running Minetest with --verbose parameter.
16:47:01: INFO[main]: Using system-wide paths (NOT RUN_IN_PLACE)
16:47:01: INFO[main]: path_share = /usr/share/minetest
16:47:01: INFO[main]: path_user = /home/dirk/.minetest
16:47:01: INFO[main]: minetest with SER_FMT_VER_HIGHEST_READ=26, VER=0.4.10 BUILD_TYPE=Release RUN_IN_PLACE=0 USE_GETTEXT=1 USE_SOUND=1 USE_CURL=1 USE_FREETYPE=1 USE_LUAJIT=0 STATIC_SHAREDIR=/usr/share/minetest
16:47:01: INFO[main]: logfile = /home/dirk/.minetest/debug.txt
16:47:01: VERBOSE[main]: httpfetch_init: parallel_limit=8
16:47:01: INFO[main]: Message locale is now set to: LC_CTYPE=de_DE.utf8;LC_NUMERIC=C;LC_TIME=en_DK.utf8;LC_COLLATE=de_DE.utf8;LC_MONETARY=de_DE.utf8;LC_MESSAGES=de_DE.utf8;LC_PAPER=de_DE.utf8;LC_NAME=de_DE.utf8;LC_ADDRESS=de_DE.utf8;LC_TELEPHONE=de_DE.utf8;LC_MEASUREMENT=de_DE.utf8;LC_IDENTIFICATION=de_DE.utf8
Irrlicht log: Irrlicht Engine version 1.8.1
Irrlicht log: Linux 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64
Irrlicht log: Using renderer: OpenGL 3.3.0
Irrlicht log: GeForce 9600 GT/PCIe/SSE2: NVIDIA Corporation
Irrlicht log: OpenGL driver version is 1.2 or better.
Irrlicht log: GLSL version: 3.3
16:47:01: INFO[main]: text_height=22
16:47:01: INFO[main]: Searching worlds...
16:47:01: INFO[main]: In /home/dirk/.minetest/worlds:
16:47:01: INFO[main]: Spielwelt
16:47:01: INFO[main]: 1 found.
16:47:01: INFO[main]: Waiting for other menus
16:47:01: INFO[main]: Waited for other menus
16:47:01: INFO[main]: Audio: Initializing...
16:47:01: INFO[main]: Audio: Vorbis extension NOT present
16:47:01: INFO[main]: Audio: Initialized: OpenAL 1.1 ALSOFT 1.16.0, using OpenAL Soft
16:47:01: INFO[main]: GUIEngine: Initializing Lua
16:47:01: VERBOSE[AsyncWorkerThread_0]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[AsyncWorkerThread_0]: Initializing Asynchronous environment
16:47:01: VERBOSE[AsyncWorkerThread_1]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[AsyncWorkerThread_1]: Initializing Asynchronous environment
16:47:01: VERBOSE[AsyncWorkerThread_2]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[main]: SCRIPTAPI: Initialized main menu modules
16:47:01: VERBOSE[main]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[AsyncWorkerThread_2]: Initializing Asynchronous environment
16:47:01: VERBOSE[AsyncWorkerThread_3]: Loading and running script from /usr/share/minetest/builtin/init.lua
16:47:01: INFO[AsyncWorkerThread_3]: Initializing Asynchronous environment
16:47:01: INFO[main]: Searching worlds...
16:47:01: INFO[main]: In /home/dirk/.minetest/worlds:
16:47:01: INFO[main]: Spielwelt
16:47:01: INFO[main]: 1 found.
16:47:01: VERBOSE[main]: OpenALSoundManager::maintain(): 0 playing sounds, 0 sound names loaded
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.0.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.1.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.2.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.3.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.4.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.5.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.6.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.7.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.8.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.9.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.0.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.1.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.2.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.3.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.4.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.5.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.6.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.7.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.8.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.9.ogg for decoding
16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.ogg for decoding
16:47:01: INFO[main]: OpenALSoundManager: "main_menu" not found.
16:47:05: INFO[main]: Audio: Deinitializing...
16:47:05: INFO[main]: Audio: Deinitialized.
16:47:05: INFO[main]: GUIEngine: Deinitializing scripting
16:47:05: INFO[main]: Searching worlds...
16:47:05: INFO[main]: In /home/dirk/.minetest/worlds:
16:47:05: INFO[main]: Spielwelt
16:47:05: INFO[main]: 1 found.
16:47:05: INFO[main]: Updating configuration file: "/home/dirk/.minetest/minetest.conf"
16:47:05: INFO[main]: Skipping writing of /home/dirk/.minetest/minetest.conf because content wouldn't be modified
16:47:05: INFO[main]: Updating configuration file: "/home/dirk/.minetest/minetest.conf"
16:47:05: INFO[main]: Skipping writing of /home/dirk/.minetest/minetest.conf because content wouldn't be modified
16:47:05: VERBOSE[main]: httpfetch_cleanup: cleaning up
… or on nopaste.info for better readability.
Since it seems to work for everyone else (otherwise there might be more replies to my quesions in several places, I guess *g*) I’m pretty sure that’s a local problem on my machine. But since gettext properly works on my machine in all and every application that use it I have no clue at all where to start debugging.
Hints are highly appreciated Thanks in advance!
Kind regards,
Dirk

Hi there...
It gives me a URL that begins with http:// Safari does something strange, ie. flashes the page, and then complains about not recognizing photo://
It seems that it has not figured out that it needs to open iPhoto 6.
Regardless, the provided link is not viewable when cutting and pasting into safari, neither.
I am using the latest and greatest 10.4.4, Safari is 2.0.3.

Configuration Template Builder WL8.1 does not work

Hello,
     After spending nearly 2 days now trying to get a Configuration Template
built, I've concluded this simply does not work. Has anyone used the
Config Template builder to package a semi-complex application on top of WLI?
     I'm trying to have 2 of my applications, the JMS and JDBC resources,
and a WLI event generator packaged up for easy deployment to someone
else's server configuration. The problem with this is that there are
required resources for WLI, namely a database. The Pointbase database
included for WLI does not get included in the template automatically.
There are also some flat-out bugs:
If you choose to include a resource adapter "application", such as
jms-xa-adp.rar, the template builder does not bundle this in the
template and deploy it correctly. The template builder restricts you to
putting applications in the relative path starting at ./
For jms-xa-adp.rar, its original location is in $WL_HOME/server/lib, and
the template builder defaults to put it in ./lib of your template.
However, when you create a domain with the template, jms-xa-adp.rar does
not get placed in your ./lib directory. This causes you to then go and
manually edit your config.xml to point back at $WL_HOME/server/lib or to
manually copy jms-xa-adp.rar into your ./lib directory (which the
template mechanism should do for you).
Relative paths in the config.xml file require you to execute the config
builder from the directory of the domain you are making a template for.
The template builder should instead be smart enough to realize that
relative paths in the config.xml file are relative to the directory that
the config.xml is in, not the one you are running the template builder
from. You'll get an error when trying to create the template cause it
won't find the resources if you're not in that directory.
If anyone has successfully used this to package a WLI application in a
template, please share your experiences and how to do so. In the
meantime, I'm claiming there is no way to nicely package up a server
configuration for a WLI app in Weblogic, and this is a big shortcoming.
Weblogic needs a simple transferrable way of creating server
configurations (it tries to do this with the template, but that is
failing). With JBoss, for example, you simply copy your server directory
into another installation. This doesn't work with Weblogic unfortunately
because it puts hard-coded paths in the config.xml file.
Thanks

Russ,
     Thank you for the detailed responses. The only one I'm currently
struggling with still is the #5, with the scripts between the two. One
of the major benefits of using a J2EE App Server is supposed to be the
portability between servers. I find it disconcerting that BEA Weblogic
restricts me to the platform I created the domain on by creating
platform-specific startup/shutdown scripts for only the platform created
on. It's understandable that a script converter would be difficult, but
at least both the .sh/.cmd files should be created from the first time
you make a domain. If the user only wants one or the other, they can
delete the appropriate one. It's also understandable that the
users/deployers shouldn't have to manually convert a startup/shutdown
script to take the domain to a different box.
     JBoss clearly has BEA beat on ease of deployment here. Their model is
the concept I'm thinking of: you have some generic startup/shutdown
scripts that can load a platform-independent server configuration. You
truly can copy directories as-is between JBoss installations.
     I was hoping to package up a server domain for use on any of the
supported platforms, but since I don't have the time to manually convert
the startup/shutdown scripts, I'm going to have to tell people it's only
for Solaris now.
     Hopefully BEA can fix this in a future SP. There's no need for this
platform-dependency. Also, if the Windows version can generate both
scripts at creation time, then the Solaris should be able to do this as
well (or at least give you the option).
Thanks again for the replies
russ wrote:
Hi Steven,
I have several comments and questions about your last two posts. I will try to
address them in order.
1) "The Pointbase database included for WLI does not get included in the template
automatically."
     By default the template builder only includes the *.cmd and *.sh files in the
template from your domain directory. If you begin building with an existing
domain template all files that were in the template will get included. This was
done because there is no way for the builder to automatically determine all the
files that are required by your template/domain and we steered away from recursively
including all files from the directory so that unused files were not needlessly
included. We can extrapolate some files based on the application paths in the
config.xml, but the rest is left up to the template builder to be aware of what
is needed for their domain to run. So, if you need the Pointbase *.dbn and *.wal
files included in your template just select these files on the ?Add Files? panel
of the template builder and add them to the ?Domain Directory?.
2) ?If you choose to include a resource adapter "application", such as jms-xa-adp.rar,
the template builder does not bundle this in the template and deploy it correctly.?
     The template builder considers application files to be in two categories: Imported
or Internal. When you are at the ?Add Applications? panel of the builder you
will see a checklist of all the applications that are in the domain you selected.
On the right hand side there are two text fields. The top one displays the application
path as it is currently set in the config.xml of that domain. The bottom field
will be different depending on what category the application falls into. As you
click on each application in the list, you may notice that the bottom field may
change from an editable field titled ?Imported Application Path? to a non-editable
field titled ?Internal Application Path?. The difference between the two categories
is that an ?Imported? application?s files will be included in the template jar.
An ?Internal? application?s files will not be included in the template jar because
they are considered internal to the weblogic installation. The jms-xa-adp.rar
should fall into the internal category and should not get included in your template.
     From what you are describing it sounds like the builder attempted to import that
application when it should not have. In an attempt to recreate the problem you
are seeing I deployed that Connector Module through the WLS console and ended
up with an application path of ?C:\bea\weblogic81\server\lib? where ?C:\bea\weblogic81?
is my WL_HOME (a.k.a. USER_INSTALL_DIR). If I then attempt to build a template
from this domain, the builder recognizes this as an internal path and does not
include it inside my template. If the current application path you had looks
different from the one above, that may explain why the builder was attempting
to import it. What was the value of the ?Current Application Path? for that application
deployment?
3) ?Relative paths in the config.xml file require you to execute the config builder
from the directory of the domain you are making a template for.?
     The builder is ?smart? enough to determine relative paths. You should not have
to invoke it from the domain directory you are working with. There is a known
bug in the WebLogic Platform 8.1.1.0 release of the template builder that will
cause it to not find files with relative paths in your domain directory if the
application path in the config.xml is just a ?.?. If this is the case, you should
see a FileNotFoundException when you attempt to create the template. This will
be fixed in SP2 and you can work around this problem by changing those paths to
?./? instead. If this was not the case, what was the path the wizard choked
on?
4) ?Looking through the config file, it seems that it's all of the WLI components
that have absolute paths in the config file. In addition, BEA_WLS_DBMS_ADK has
an absolute path, not sure if that is WLI or WLS. ?
     BEA_WLS_DBMS_ADK is an integration application. If you created the original
domain using the configuration wizard most of the applications in an integration
enabled domain will reference paths inside of you installation directory or ?internal?
paths. For instance, I used the wizard to create a ?Basic WebLogic Integration
Domain?. The path for that application in this domain is: ?C:\bea\weblogic81/integration/adapters/dbms/lib/BEA_WLS_DBMS_ADK.ear?
where ?C:\bea\weblogic81? is my WL_HOME or USER_INSTALL_DIR. When I load this
domain into the builder it shows this application as ?internal? and the ?Internal
Application Path? is "$USER_INSTALL_DIR$/integration/adapters/dbms/lib/BEA_WLS_DBMS_ADK.ear".
This will be set as the path value of this application in the config.xml that
will be included in the template you build. When you later use the Configuration
Wizard on this template it will substitute the $USER_INSTALL_DIR$ to the value
of the installation directory of the machine you are creating it on.
     If you were to Change these to relative paths, as Mark previously suggested,
it will only work if you copy the domain directory to the same location relative
to your installation directory on the target machine. Also, if you copy the domain
in this manner you will more than likely run into problems with your start/stop
scripts and be forced to hand modify all the paths contained within. The configuration
wizard tries to alleviate these problems and make the configuration entirely portable.
This gives the user who creates the domain from your template the ability to
put it anywhere they want regardless of the paths in the config.xml.
5) ?However, there is another major problem with the Template Builder: it only
includes the startup/shutdown script for the platform you create the template
on. ???I built the template on Solaris with the UNIX scripts. However, I tried
to create a new config on Windows with this template, and the scripts were not
converted to .bat files!?
     As I stated previously, the builder will only include *.cmd and *.sh scripts
into your template by default. If you created the domain on a unix platform using
the configuration wizard it will not extract the *.cmd files since these aren?t
considered to be useful on unix. If you were then to attempt building a template
from this domain and take it onto a windows platform, it will obviously be missing
any windows scripts. Conversely, the wizard will extract *.sh scripts on windows
because they can still be useful if a user has an MKS or Cygwin type environment
installed. The config wizard and template builder do not have the ability to convert
scripts. The builder will only include existing scripts that are in your domain
directory and automatically determine any necessary string substitutions that
will be needed. Please note that since WebLogic is only supported on the NT/2K/XP
versions of windows you will find that the wizards use ?.cmd? files and not ?.bat?
files since these are more commonly associated with Win 95/98/ME.
     I will be happy to answer any more questions you may have and would also like
to take a look at your domain configuration to try and get a better understanding
of the problems you are encountering.
thanx,
russ

Wireless Works during install.... Does not work after install.

Hiya!
I just finally finished semi-installing from live. it's exciting. I'm stuck at cli trying to get wireless to work.
it's really weird. First- I only have wireless (it's from my downstairs neighbors). I used it DURING the install process- downloaded all of the packages, etc etc.
But when I start up my computer, I get a [FAIL] by network (it does not start up). However, if i # ifconfig wlan0 up, the wireless turns on.
iwconfig does not work
and I cannot scan for networks...
During install, I was able to see the names of every network.
There isn't any sort of password for the router I would like to connect to (and connected to before); it's just a linksys.
My wireless card is intel 5300 and I'm almost certain I installed the 5000 driver package.
Thoughts?
Perhaps I should go to sleeeeeeep..
IT"S JUST SO ADDICTING

zee wrote:IT"S JUST SO ADDICTING
You've just been sucked into the world of Arch Linux! Watch as your skin becomes pale, your eyes turn square and you suddenly feel compelled to run "pacman -Syu" every 10 minutes
Must...... keep....... up...... to......date....

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

A2109 tablet autorotate does not work

The autorotation on my recently purchased tablet A2109 does not work. I look in settings and the auto rotate field is not highlighted, I therefore cannot choose to turn it on.The tablet has the Android jellybean OS and I did update it but to no avail. Can anyone help?
Thanks
Solved!
Go to Solution.

Dear tdsouza
Welcome in lenovo forums
just a clarification , do you mean option Rotate is dimmed in setting
Please let me know
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

For what reason on my tablet with OS Android 4.1 does not work flash on the sites?

Hi! I recently bought a Google Nexus 7 tablet with Android 4.1 operating system and on my tablet does not work flash sites. Why adobe does not release a new version of flash for android 4.1? Why it was necessary to buy a company Macromedia, if adobe does not want to develop web technology? I think against Adobe can sue for violation of antitrust

I found this for example:
http://www.slashgear.com/adobe-no-jelly-bean-flash-flash-player-pulled-altogether-august-1 5-29236404/

My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already

My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already have it installed...

1.      Are you getting any error message?
2.      Which browser are you using?
3.      Were there any recent changes made on the computer prior to the issue?

My flash player does not work on my tablet.

My flash player does not work on my tablet

Your tablet uses Android OS.
There is no more Flash Player for Android and there won't be another. Android is no longer compatible with Flash Player. Playing Flash content is very processor consumptive and it drains your battery, also shortening the life of it. Android (Google) recommends using either "Dolphin" or "Puffin" as your browser if you need to view Flash content with a mobile device running Android. They're both free in the GooglePlay store. These browsers use "server side" rendering to reduce the load on your device.

Dynamic image does not work in the template builder plug-in (Apex-BI Intgr)

Hi all, I posted this problem in the BI Publisher topic but nobody responded maybe this is because mods thought this is an Apex-BI integration issue.
If I'm in the wrong place, please do warn me.
The documentation says:
Direct Insertion
Insert the jpg, gif, or png image directly in your template.
...This works obviously
URL Reference
1. Insert a dummy image in your template.
2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
url:{'http://image location'}
For example, enter: url:{'http://www.oracle.com/images/ora_log.gif'}
...This works too when I hardcode an url as url:{'http://www.google.com.tr/images/firefox/mobiledownload.png'}
Element Reference from XML File
1. Insert a dummy image in your template.
2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
url:{IMAGE_LOCATION}
where IMAGE_LOCATION is an element from your XML file that holds the full URL to the image.
...This, however, does not work.
I use Apex' report query tool and My query is like
select 'http://www.google.com.tr/images/firefox/mobiledownload.png' IMAGE_LOCATION from ... (a single result set for my template)
the xml data is generated with an IMAGE_LOCATION tag. I load it to word template plug-in. The Url successfully displays in the report if I make it a plain-simple field.
But when it's in the image format->web->alt text as url:{IMAGE_LOCATION} no image displayed.
I need to keep this design procedure simple so a simple word user could design a report via using just template builder plug-in. I don't wish to explore the xsl-fo area...yet.
Could you tell me why I can't get this url:{IMAGE_LOCATION} to work?
Regards
PS: My BI version: 10.1.3.4.1

Hi Oeren,
your steps seem basically to be correct. I have a tutorial how to do this here (in german)
http://www.oracle.com/webfolder/technetwork/de/community/apex/tipps/pdf-dyn-images/index.html
when you see the URL corrently as long as you have it as a plain text field, the XML tag and the
referencing seem to be OK.
Here are two thought - the issue might be one of these ...
How did you insert the dummy image into the word document - did you do it via "insert" or
via "link to file". "Link to File" does not work - you must choose the simple "insert".
Another one: Does your BI Server have a connection to the internet - is the proxy server correctly set ..?
Does this help ..?
Regards
-Carsten
Cloud Computing mit APEX umsetzen. Jetzt!
http://tinyurl.com/apexcloudde
SQL und PL/SQL: Tipps, Tricks & Best Practice
http://sql-plsql-de.blogspot.com

I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch n

Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch now. I have so much data on this, I don't want to loose or have to restore!
Can you help me?
Thanks

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

"HP laserjet professional utility" does not work in osx 10 (Yosemite)

All the major functions of this printer work fine in Yosemite, but not the "HP laserjet professional utility"The driver shown in System Preferences/Printer for my Laserjet P1606dn is version 6.9 (I am unable to knowif this is the version provided by the latest HP printer update, which was installed via the App Store.) I note this exact issue was raised for OSX7 in November 2014, but for a diiferent model printer. My printer is on my local wifi network, and that earlier case seemed to invove a direct USB connection. The solution offered in that thread, 4694464,may not be applicable now, so I seek advice In the panel for my 1606dn within System Preferences/Printer offers a button to launch the "HP Professional Utility", but when clicked an app launches called the "HP Professional Utility" but then nothing. I am trying to access the printer controls that will keep it from turning itself off when idle, and the documentation says the "HP Professional Utility" will allow that change. Please advise

Hey , Welcome to the HP forums! I hope you enjoy your stay here. I see that you are having some issues with adjusting the power save mode settings on your Laserjet P1606dn. I can help with that. First make sure the printer is plugged directly into a wall outlet and not a surge protector. If the printer is connected with an ethernet cable to a router then you may be able to do this instead:On the printer hold down the button that looks like a sheet of paper with an arrow on it for about ten seconds. This should print out a report.On your Mac open a browser and enter the printer's IP Address in your Address bar exactly as it appears on the page. When you are finished click on enter/return.This will open the printer's Embedded Web Server. In here you may be able to find some options to adjust the power save settings.If the above does not work then this troubleshooting may assist you with the utility:Go to Applications, and if you have it open the Hewlett-Packard folder.Run HP Uninstaller to remove any existing software from you system.On the Mac go to the Apple icon and Sytem Preferences.Open Printers and Scanners.Hold down the Command key and click on the picture of your printer on the left.Click on Reset Printing System.Go to Applications and Utilities.Open Disk Utility.Click on Macintosh HD on the left.Click on Verify Disk Permissions. This should take about ten minutes.Click on Repair Disk Permissions. This should take about ten minutes.Restart your Mac.Plug in the USB cable between the printer and the router.Check for Product Updates on your Mac.Try running the tool again.If this resolves everything please let others know by clicking on Accept as Solution below my post.
I hope this helps and I hope you have a great day!

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

TS1702 When I update to IOS6 on my 4S Facebook does not work properly, the news feed never updates it only says no new storeys and shows a picture of an antenna. When I reset my phone and go back to IOS5 Facebook works fine. What's up with IOS6 ????

When I update my iPhone 4S to iOS six Facebook does not work properly the newsfeed doesn't load properly and I can never see what's going on all I see is a picture of an antenna and a little thing underneath it says no new stories when I reset my phone back to iOS 5 then it works just fine and I don't have any issues so there must be something wrong with iOS six that isn't letting Facebook load properly

No I did not use any unauthorized methods for anything, I simply reset my phone back to factory.
<Edited By Host>

SEM CPM Drilldown does not work

Similar Messages

Maybe you are looking for