Semantic Error: No accessible method with signature

HI,
I am trying to set the sender address as below.
MimeMessage msg = new MimeMessage( session );
// Set message attributes
msg.setFrom( new InternetAddress( fromAddress ) );
Address add = new InternetAddress("[email protected]");
msg.setSender(add);
But I am getting compile time error :
Semantic Error: No accessible method with signature "setSender(javax.mail.Address)" was found in type "javax.mail.internet.MimeMessage".
Seeing the jar file, setSender( Address xxx ) is definetly present. But I see this error. Any ideas why is this error?
Thanks.

Hi Shreevatsa
You can try like this
IN CO
YourAMImpl am = (YourAMImpl)pageContext.getApplicationModule(webBean);
Number citemVerId = am.saveFileToDB(s1, s2, s3, s4, blobdomain, n1);Hope it helps!!!
Thanks
AJ

Similar Messages

No method with signature -initPaymentMethodLOVVO()

Hi,
I have extended a CO and calling an AM which have one method xxxxxLOVVO().
I have compiled the CO code and AM code without error.
However when I run the page , I am getting the error on top of the page . The error says "No method with signature No method with signature - xxxxLOVVO()"
How do I debug this error.
Thanks in advance
Edited by: user10998128 on Feb 10, 2011 11:05 AM

Hi Gyan
I appreciate the effort all you guys putting by looking into the matter. I am putting the code as its there (in the below screen), this is one which gets compiled earlier and errored out during page run ( with the top left of screen showing No method with signature -initPaymentMethodLOVVO())
In the processRequest method in the CO, I am using follwoing lines of code
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
SSHRParams sshrparams = new SSHRParams(pageContext.getRootApplicationModule());
String asgid = pageContext.getParameter("pAssignmentId");
int asg_id=Integer.parseInt(asgid);
OAApplicationModule oa =(OAApplicationModule) pageContext.getApplicationModule(webBean);
OADBTransaction oadbtransaction=oa.getOADBTransaction();
Configuration configuration = (Configuration)oadbtransaction.findObject(Constants.CFG_REFERENCE);
String effdate =sshrparams.getEffectiveDate();
String s = configuration.getTerritoryCode();
String payid = configuration.getPayrollId();
int pay_id=Integer.parseInt(payid);
String bgid = configuration.getBusinessGroupId();
int busgrp_id=Integer.parseInt(bgid);
String l_payroll_id;
OAApplicationModule am =(OAApplicationModule)pageContext.getApplicationModule(webBean);
OracleCallableStatement oraclecallablestatement ;
String sql = "BEGIN XX_PAY_METH_PKG.XX_GET_PAY_METHOD(:1, :2, :3, :4, :5); END;";
oraclecallablestatement = (OracleCallableStatement)oadbtransaction.createCallableStatement(sql, -1);
try {
oraclecallablestatement.setInt(1, pay_id);
oraclecallablestatement.setInt(2, busgrp_id);
oraclecallablestatement.setString(3,effdate);
oraclecallablestatement.setInt(4, asg_id);
oraclecallablestatement.registerOutParameter(5,OracleTypes.VARCHAR,0);
oraclecallablestatement.execute();
l_payroll_id = oraclecallablestatement.getString(5);
oraclecallablestatement.close();
} catch(SQLException exception){
l_payroll_id = "0";
if(!l_payroll_id.equals("0"))
Serializable[] param = {l_payroll_id,bgid,effdate};
am.invokeMethod("initXXPaymentMethodLOVVO",param);
else
Serializable[] param = {payid,bgid,effdate};
am.invokeMethod("initXXPaymentMethodLOVVO",param);
and in the AM I am using
public void initXXPaymentMethodLOVVO(String payroll_id,String busgrp,String effdate) {
XXPaymentMethodLOVVOImpl xxvo = getXXPaymentMethodLOVVO1();
xxvo.setWhereClauseParams(null);
xxvo.setWhereClause(null);
xxvo.setWhereClauseParam(1,payroll_id);
xxvo.setWhereClauseParam(2,busgrp);
xxvo.setWhereClauseParam(3,effdate);
xxvo.executeQuery();
Sorry for all the confusion earlier .

No method with signature - initProfiles() error

Hi,
I am working on HRMS Talent Managment .
we have added a new region to setObjectives page and added related co,vo and added the vo to the AM.
After running the page I am getting "No method with signature - initProfiles()" in the page .
Please help me to resolve this error
Thanks
Uma.

Uma,
try to delete all class files, recompile and run! Also, check if any CO is not extended other than from OAControllerImpl, although it would not be generally.
--Mukul

No method with signature

Hi,
I am getting this error when i am clicking on submit button.
No method with signature - No method with signature - init().
Regards,
RGB

Double check the method name you are mentioning here is the same which you have used in AM or not.
Thanks
--Anil

JSR 172: error while invoking methods with the same signature

Hi
I am facing a peculiar problem which is not making sense to me. This is what I have done:
1. Written a simple web service that has two methods: sayHello and sayHellToMe. Both these methods have same signatures. They do not take in any parameter and return a string.
2. Deployed this web service (document/literal) type on Axis 1.2
3. Generated the stub classes from the wsdl file using Sun Wireless Toolkit's Stub Generator
4. I have now written a MIDlet that uses this stub class to invoke both the methods one after the other.
I enabled SOAPMonitor on Axis and saw the SOAP Request and SOAP Response messages. I observed the following:
1. In the first method: sayHello - everything works fine (with a few tweaks in the Stub class)
2. However, while invoking the second method sayHelloToMe, the SOAP Body tag in the SOAP Request does not contain any method name. I checked out the Stub class, the qnames and the types are all correct..
I also realized that this behavior is seen only when I have methods with the same signature in the web service. Any idea why this might be happening? It seems like a very weird problem.
Any help in this regard will be greatly appreciated.
Thanks,
Arati

Hi, I'm closing this thread and opening the same in another as the content got pasted in reader un friendly format and i'm unable to change the format.
Thanks,
Ravi.

Error when calling method with a return of double in j2me

hello all,
i have following problem with a j2me program:
if i call a method with a return of double, then i get following error
message:
ERROR: floating-point constants should not appear
Error preverifying class test.hallo
what i'm doing wrong
thanks in regard
----------------example----------------------------
double yourValue(int y, int m, int d)
double v = 0.10;
v = 3.39 y m *d
return v;
public void startApp()
int td;
int y =2;
int m =2;
int d =2;
td = yourValue(y,m,d);
return(td);

It's true for MIDP 1.0.
But you can always use implementation of the float
point arithmetic which was written by independent
developers. For example see J2ME section of my
homepage http://henson.newmail.ru
anyway, double is reserved word in java, the way you wrote the source code in your example neither the preverifier nor the compiler will recognize that you intend to use your own types for double and float. maybe with Double or Float it would be different ...
further question: you declare a void function, in the body, however, you try to return some value. something wrong with this function??
regards
bernard

Error executing connection method with WS- wsdl

Good day.
I need a little help.
I have some problem running the access procedure to the web service mapped on my WDJ.
I did all the procedure for use ro wsdl, did the mapping of the fields in my context.
after it was run method to send the connection parameters.
But when running:
wdContext.currentConsultaSincronaElement().setChaveAcesso("XXXXXXXX-4487-4AE6-A41E-10F7808AYYYYYYY");
Is the error below:
java.lang.NullPointerException: while trying to invoke the methodnet.mdm.bp.wd.search.wd.comp.mastercompnew.wdp.IPrivateCreateFirstCompView$IConsultaSincronaElement.setChaveAcesso(java.lang.String) of a null object returned from
net.mdm.bp.wd.search.wd.comp.mastercompnew.wdp.IPrivateCreateFirstCompView$IContextNode.currentConsultaSincronaElement()
What can be happening? The mapping is correct with the fields of WS.
Already checked one by one.

hi carlos,
have you checked the collection cardinality of your input context?
the generated/Initial value is 0..1. so your currentNodeElement is probably null.
if so - set the value to 1..1 and try it again.
regards,
christian

JSR 172: error while invoking methods of same signature

Hi
I am facing a peculiar problem which is not making sense to me. This is what I have done:
1. Written a simple web service that has two methods: sayHello and sayHellToMe. Both these methods have same signatures. They do not take in any parameter and return a string.
2. Deployed this web service (document/literal) type on Axis 1.2
3. Generated the stub classes from the wsdl file using Sun Wireless Toolkit's Stub Generator
4. I have now written a MIDlet that uses this stub class to invoke both the methods one after the other.
I enabled SOAPMonitor on Axis and saw the SOAP Request and SOAP Response messages. I observed the following:
1. In the first method: sayHello - everything works fine (with a few tweaks in the Stub class)
2. However, while invoking the second method sayHelloToMe, the SOAP Body tag in the SOAP Request does not contain any method name. I checked out the Stub class, the qnames and the types are all correct..
I also realized that this behavior is seen only when I have methods with the same signature in the web service. Any idea why this might be happening? It seems like a very weird problem.
Any help in this regard will be greatly appreciated.
Thanks,
Arati

The 'numeric or value error' is one we have seen many times. The problem has been identified and fixed. Refer to this thread for more information.
Issue with DB Adapter - ORABPEL-11811

No event method with matching name and signature found on EventSet

Dear,
I have this error in the Problems view in Workshop (I'm using the Weblogic 9.2.1) :
No event method with matching name and signature found on EventSet: com.bea.control.TaskControl.Callback.
This error occurs sometimes when I put an event on a task in a process definition. Example, I have a process : Application.java, when I put the onReceptionCompleted control (receive) in my process, the error appears!
Thanks for your help,
Regards,
Mathieu

It is a problem with the drap & drop in Workshop (from the taskControl to the Process). Workshop automatically inserts a wrong eventSet instead of the good one from the generated task control !
See you,
Mathieu

Error: The AcquireConnection method call to the connection manager failed with error code 0xC0202009 using DB2 connection

I have a SSIS project that I am newly running on the SQL server (2005) . It was previously run on my PC. I am importing data from a DB2 server to the SQL server.
I am in the SA group on the server
My connection to DB2 works
When open the package and run it in preview mode, I can retrieve the data.
When I execute the package I get the below errors:
[MIDAS OLE DB Source [1]] Error: The AcquireConnection method call to the connection manager "NGMDSPA.alharris" failed with error code 0xC0202009.
[DTS.Pipeline] Error: component "MIDAS OLE DB Source" (1) failed validation and returned error code 0xC020801C.
What I have already done that has not worked:
The original Protection level was set to EncryptSensitiveWithPassword.
I have reset the Package Password.
I have set the protection level to DontSaveSensitive
I saved the package on the server and set a Package Password.
I created a new package, set the Protection level to DontSaveSensitive, set a package password in a configuration file using the Package Configuration Wizard.
Error continues

Yes. The Drivers are installed and I have a successfull connection. I am trouble shooting the issue on the server in BIDS. I can connect to the DB2 server via the Connectionmanager. I can also preview the data in the OLE
DB source connection. Therefore I know that I have a proper connection
If you're setting option as DontSaveSensitive then you need to pass the connection information from configuration file/ config table. Otherwise it wont be able to use it for connecting to your source/destination servers. This is the recommended way as it
will enable you to change connection info at runtime.
If you want connection info to persist you need to use protection level as EncryptSensitiveUsingUserKey or EncryptSensitiveUsingPassword and set a password.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Job is failing with the following error- Error calling a method of the tree

dear SDNers,
my question is where do i need to look for error.
Will this be an ABAP issue?
Please guide
DETAILS
In SM37 when we see the job XYZ, we get the following details.
   Job                              Ln    Job CreatedB    Status          Start date     Start time      Duration(sec.)     Delay (sec.)
XYZ                                                                    Canceled        16.11.2009    10:11:30                  9                         27
When the job log is checked this , we get the below details.
The job XYZ is failing with the following error.
Date      Time     Class No.   Message
+----
+----
2009/11/16 05:03:01 | 00     516 | Job started
2009/11/16 05:03:01 | 00     550 | Step 001 started (program RBDMON00, variant
SBCI287, user ID ABCDEF)
2009/11/16 05:03:03 | TREE_C 000 | Error calling a method of the tree control
2009/11/16 05:03:03 | 00     518 | Job cancelled
Equest your assistance in knowing where to find the error for this.
I have no clue as to where and how i need to debug or where i should i be looking for error.
In BD87, the selection screen paramters that are given are changed on date (from and to) and IDOC status 51,66,69 and 64 and the message type is "Öutbound interface of picked shipments"
Please guide.
Regards,
SuryaD.
Edited by: SuryaD on Nov 23, 2009 5:36 PM
Edited by: SuryaD on Nov 23, 2009 11:14 PM

> 1. There is a job name ABCDEF
> 2. When this job is run then the status shows cancelled and the job error log shows tHe details that "error calling a method of the tree control"
> 3.ThIs error also points fingers to /link to BD87 as seen in the job log " (program RBDMON00, variant \SBCI287, user ID KRISF)"
>
BD87 is an IDOC processing.
> My question to you Sampath.
>
> in order to answer your question on whether it is ALv or SALV.. please tell me as to how will i know which progrm is associated with the job ABCDEF?
>
Go to sm37 - double click on the job that was failed - Click on Step (on application tool bar) to get the program name - double click on the program name - new popup will be opened - then copy the program and variant
Go to se38 - enter the program - execute (F8) - choose the variant that is there in the background job - run in forground first
if the run is good - then check the program - SE38 - Display the program then see
I just saw the above message BD87... .if that is true, you dont have to do all these
I dont think it is possible to schedule a job with BD87. Is this the first time or is any job completed without errors for this?

After trying many times with two different debit cards still does not allows me to buy a game from the app store gives error "YOUR PAYMENT METHOD WAS DECLINE.PLEASE ENTER VALID PAYMENT METHOD INFORMATION" Please help me out

I WANT TO PURCHASE NFS MOST WANTED GAME FROM APP STORE BUT IT DOESN'T ALLOW ME TO PROCEED FURTHER
after trying many times with two different debit cards still does not allows me to buy a game from the app store gives error "YOUR PAYMENT METHOD WAS DECLINE.PLEASE ENTER VALID PAYMENT METHOD INFORMATION" Please help me out

In most cases, you can't use a Debit card anymore. So, either redeem an iTunes gift card or use a credit card.

ERROR - the ProtectKeyWithTPMAndPIN Method failed with the exit code: 8031005B

Hello
I am using the EnableBitlocker.vbs script to automatically assign the TPM and start the encryption. I am running it from an elevated command prompt. Here is are the arguments I am running with
cscript EnableBitLocker.vbs /on:tp
/l:c:\bitlockerlog.log /promptuser /ro:"MBAM" on
All is well and it prompts the user for a PIN but then it fails.
Here is the full log file. I haven't been able to find any info on the error code in the subject.
Script processing started 02/07/2014 14:43:27
Proper number of command line arguments passed to the script
---------------Executing with the following arguments------------------
Enable parameters: tp
Logging location: c:\bitlockerlog.log
Create recovery key: No recovery key use specified
Encryption method: 3
Create SMS status MIF's: No SMS status MIF's will be created
Reset TPM ownership: 1
User prompting: 1
Connection succeeded to MicrosoftTPM
Successfully retrieved a TPM instance from the Win32_TPM provider class
TPM found in the following state:
Enabled - True
Activated - True
Owned - True
Connection succeeded to MicrosoftVolumeEncryption
TPM is in a ready state to enable BitLocker.
Change TPM owner password specified on the command line.
Random TPM owner password is: ;&K:)BU65|c7_v2n
Completed converting old owner password to owner authorization: 0
Completed converting owner password to owner authorization: 0
Starting to change owner authorization process on the TPM
ERROR - Failed to change owner authorization on the TPM with the following exit code: 80280001
Successfully connected to WMI StdRegProv
Checking if Group Policy encryption method is set...
Found EncryptionMethod with value: 4
Found EncryptionMethod policy registry key ignoring any /em options on command line
Found ActiveDirectoryBackup with value: 1
Found RequireActiveDirectoryBackup with value: 1
Determined client Group Policy configured to require AD escrow of recovery password
EncryptableVolumes count is: 1
The EncryptableVolume(s) found: \\?\Volume{ad6db324-01dd-11e4-8272-806e6f6e6963}\
EncryptableVolume used for encryption is: C:
The volume has a protection status of: 0
BitLocker Protection is Off
Get conversion status is: 0
The volume has a status of fully decrypted
The following user is logged on: MGMT\80151318-sys
Attempting to enable BitLocker TPM + Pin
ERROR - the ProtectKeyWithTPMAndPIN Method failed with the exit code: 8031005B
Script ended 02/07/2014 14:43:51
Any and all help would be appreciated. This has worked before on a different laptop.
Thanks

Hi,
This error indicates that the group policy isn't set correctly, when configure the group policy at teh server side, you should notice that only one of the additional authentication can be required at start up , otherwise a policy occurs, the notice can be
found just like below:
and after test, the error indeed occurs, just like the screen below:
So, I suggest to check the group policy for bitlocker settings, you can only choose one start up authentication method.
Regards
Wade Liu
TechNet Community Support

A question about a method with generic bounded type parameter

Hello everybody,
Sorry, if I ask a question which seems basic, but
I'm new to generic types. My problem is about a method
with a bounded type parameter. Consider the following
situation:
abstract class A{     }
class B extends A{     }
abstract class C
     public abstract <T extends A> T someMethod();
public class Test extends C
     public <T extends A> T someMethod()
          return new B();
}What I want to do inside the method someMethod in the class Test, is to
return an instance of the class B.
Normally, I'm supposed to be able to do that, because an instance of
B is also an instance of A (because B extends A).
However I cannot compile this program, and here is the error message:
Test.java:16: incompatible types
found   : B
required: T
                return new B();
                       ^
1 errorany idea?
many thanks,

Hello again,
First of all, thank you very much for all the answers. After I posted the comment, I worked on the program
and I understood that in fact, as spoon_ says the only returned value can be null.
I'm agree that I asked you a very strange (and a bit stupid) question. Actually, during recent months,
I have been working with cryptography API Core in Java. I understood that there are classes and
interfaces for defining keys and key factories specification, such as KeySpec (interface) and
KeyFactorySpi (abstract class). I wanted to have some experience with these classes in order to
understand them better. So I created a class implementing the interface KeySpec, following by a
corresponding Key subclass (with some XOR algorithm that I defined myself) and everything was
compiled (JDK 1.6) and worked perfectly. Except that, when I wanted to implement a factory spi
for my classes, I saw for the first time this strange method header:
protected abstract <T extends KeySpec> T engineGetKeySpec
(Key key, Class<T> keySpec) throws InvalidKeySpecExceptionThat's why yesterday, I gave you a similar example with the classes A, B, ...
in order to not to open a complicated security discussion but just to explain the ambiguous
part for me, that is, the use of T generic parameter.
The abstract class KeyFactorySpi was defined by Sun Microsystem, in order to give to security
providers, the possibility to implement cryptography services and algorithms according to a given
RFC (or whatever technical document). The methods in this class are invoked inside the
KeyFactory class (If you have installed the JDK sources provided by Sun, You can
verify this, by looking the source code of the KeyFactory class.) So here the T parameter is a
key specification, that is, a class that implements the interface KeySpec and this class is often
defined by the provider and not Sun.
stefan.schulz wrote:
>
If you define the method to return some bound T that extends A, you cannot
return a B, because T would be declared externally at invocation time.
The definition of T as is does not make sense at all.>
He is absolutely right about that, but the problem is, as I said, here we are
talking about the implementation and not the invocation. The implementation is done
by the provider whereas the invocation is done by Sun in the class KeyFactory.
So there are completely separated.
Therefore I wonder, how a provider can finally impelment this method??
Besides, dannyyates wrote
>
Find whoever wrote the signature and shoot them. Then rewrite their code.
Actually, before you shoot them, ask them what they were trying to achieve that
is different from my first suggestion!
>
As I said, I didn't choose this method header and I'm completely agree
with your suggestion, the following method header will do the job very well
protected abstract KeySpec engineGetKeySpec (Key key, KeySpec key_spec)
throws InvalidKeySpecException and personally I don't see any interest in using a generic bounded parameter T
in this method header definition.
Once agin, thanks a lot for the answers.

Can't fill ByteArray in EJB-Method with generated Model-Class from WD-Model

Hello everybody,
i try to call an ejb-method with data from an FileUpload-UI-Element in WD. The EJB-Method is receiving the byte-data to create a document in KM via a Web-Service.
The ebj-methid has the following signature:
public FObject putFileDataSimple (byte [] btContent, String fullFileName, String username, String password)
After importing the Model and creating a context node i have the following structure:
Request_X_putFileDataSimple
+---btContent (Node)
      +-- item
+ fullFileName
+ username
+ password
btContent is of the generated Type Byte_Item, which is itself a generated Model-Class of modelClassType ARRAY
item is of Type byte
But i simply have problems to fill the context node (or the binded model-object). i tried different ways and looked at thread [https://www.sdn.sap.com/irj/scn/thread?messageID=1954223] but i cant get it work.
So my Method in WD looks like this to fill the structure and start the ejb-method:
public boolean putKMDataSimple( com.sap.tc.webdynpro.services.sal.datatransport.api.IWDResource fin ) {
try
wdContext.currentRequest_X_putFileDataSimpleElement().setFullFileName("abc");
wdContext.currentRequest_X_putFileDataSimpleElement().setUsername("def");
wdContext.currentRequest_X_putFileDataSimpleElement().setPassword("xxx");
byte[] buffer = new byte[1];
InputStream in = fin.read(false);
int i = 1;
int j = 0;
while (i!=-1)
     i = in.read(buffer);
     if (i!=-1)
       Byte_Item bi = new Byte_Item(mAlf);     // mAlf ist global defined Model-Class-Instance
       bi.setItem(buffer[0]);
        wdContext.currentRequest_X_putFileDataSimpleElement().modelObject().addBtContent(bi);
wdContext.currentRequest_X_putFileDataSimpleElement().modelObject().execute();
Doing this results in Error-Messages like:
Model-Object is not a complex type for every byte added this way.
And finally an IllegalArgumentException at java.lang.reflect.Array.set(Native Method)
The second way i tried is:
public boolean putKMDataSimple( com.sap.tc.webdynpro.services.sal.datatransport.api.IWDResource fin ) {
try
wdContext.currentRequest_X_putFileDataSimpleElement().setFullFileName("abc");
wdContext.currentRequest_X_putFileDataSimpleElement().setUsername("def");
wdContext.currentRequest_X_putFileDataSimpleElement().setPassword("xxx");
byte[] buffer = new byte[1];
ArrayList<Byte> btlist = new ArrayList<Byte>();
InputStream in = fin.read(false);
int i = 1;
int j = 0;
while (i!=-1)
     i = in.read(buffer);
     if (i!=-1)
          btList.add(buffer[0]);
wdContext.currentRequest_X_putFileDataSimpleElement().modelObject().setBtContent(btList);
wdContext.currentRequest_X_putFileDataSimpleElement().modelObject().execute();
Trying so results in:
java.lang.ClassCastException: class java.lang.Byte:null incompatible with interface com.sap.tc.cmi.model.ICMIModelClass:library:com.sap.tc.cmi(at-sign)[email protected]@alive
whenn calling the setBtContent Method
I don't what to do now to fill the context/model-object the right way.
Any helpfull hints are very welcome
Edited by: Matthias Hayk on Dec 1, 2008 5:51 PM
Edited by: Matthias Hayk on Dec 2, 2008 10:56 AM

Ok Vesselin and thanx for your idea,
so i adapted the source in the way you told like the following:
                 ArrayList<Byte_Item> btlist = new ArrayList<Byte_Item>();
                 byte[] buffer = new byte[1];
                 InputStream in = fin.read(false);
                 int i = 1;
                 int j = 0;
                 while (i!=-1)
                      i = in.read(buffer);
                      if (i!=-1)
                           // Byte gelesen
                           Byte_Item bi = new Byte_Item(mAlf);
                           bi.setItem(buffer[0]);
                           btlist.add(bi);
                           j++;
                 wdContext.currentRequest_X_putFileDataSimpleElement().modelObject().setBtContent(btlist);
                 wdContext.currentRequest_X_putFileDataSimpleElement().modelObject().execute();
This results also in the following Exception when exceuting the WS-proxy:
execute
[EXCEPTION]
java.lang.IllegalArgumentException
at java.lang.reflect.Array.set(Native Method)
at com.sap.tc.webdynpro.model.ejb.model.EJBGenericModelClassExecutable.getInputParameters(EJBGenericModelClassExecutable.java:215)
at com.sap.tc.webdynpro.model.ejb.model.EJBGenericModelClassExecutable.execute(EJBGenericModelClassExecutable.java:112)

Semantic Error: No accessible method with signature

Similar Messages

Maybe you are looking for