Semantic Partitioning Delta issue while load data from DSO to Cube -BW 7.3

Hi All,
We have created the semantic partion with the help of BADI to perform Partitions. Everthing looks good,
first time i have loaded the data it is full update.
Second time i init the data load. I pulled the delta  from DSO to Cube . DSO is standard where as Cube is partition with the help of semantic partition. What i can see is the records which are updated in Latest delta are shown into the report rest all are ignored by the system.
I tried compression but still it did not worked.
Can some has face this kind
Thanks

Yaseen & Soujanya,
It is very hard to guess the problem with the amount of information you have provided.
- What do you mean by cube is not being loaded? No records are extracted from DSO? Is the load completing with 0 records?
- How is data loaded from DSO to InfoCube? Full? Are you first loading to PSA or not?
- Is there data already in the InfoCube?
- Is there change log data for DSO or did someone delete all the PSA data?
Sincere there are so many reasons for the behavior you are witnessing, your best option is to approach your resident expert.
Good luck.
Sudhi Karkada
<a href="http://main.nationalmssociety.org/site/TR/Bike/TXHBikeEvents?px=5888378&pg=personal&fr_id=10222">Biking for MS Relief</a>

Similar Messages

  • Issue while loading data from DSO to Cube

    Gurus,
    I'm facing a typical problem while loading Cube from a DSO. The load is based upon certain conditions.
    Though the data in DSO satisfies those condition, but the Cube is still not being loaded.
    All the loads are managed through Process Chains.
    Would there be any reason in specific/particular for this type of problem?
    Any pointers would be of greatest help !
    Regards,
    Yaseen & Soujanya

    Yaseen & Soujanya,
    It is very hard to guess the problem with the amount of information you have provided.
    - What do you mean by cube is not being loaded? No records are extracted from DSO? Is the load completing with 0 records?
    - How is data loaded from DSO to InfoCube? Full? Are you first loading to PSA or not?
    - Is there data already in the InfoCube?
    - Is there change log data for DSO or did someone delete all the PSA data?
    Sincere there are so many reasons for the behavior you are witnessing, your best option is to approach your resident expert.
    Good luck.
    Sudhi Karkada
    <a href="http://main.nationalmssociety.org/site/TR/Bike/TXHBikeEvents?px=5888378&pg=personal&fr_id=10222">Biking for MS Relief</a>

  • ERROR :  "Exceptions in Substep: Rules" while loading data from DSO to CUBE

    Hi All,
    I have a scenario like this.
    I was loading data from ODS to cube daily. everything was working fine till 2  days before. i added some characteristic fields in my cube while i didn't do any change in my key figures. now i started reloading of data from ODS to cubes. i got the following error  "Exceptions in Substep: Rules" after some package of data loaded successfully.
    I deleted the added fields from the infocube and then i tried toreload data again but i am facing the same error again  "Exceptions in Substep: Rules".
    Can any one tell me how to come out from this situation ?
    Regards,
    Komik Shah

    Dear,
    Check some related SDN posts:
    zDSo Loading Problem
    Re: Regarding Data load in cube
    Re: Regarding Data load in cube
    Re: Error : Exceptions in Substep: Rules
    Regards,
    Syed Hussain.

  • Job cancelled While loading data from DSO to CUBE using DTP

    Hi All,
      while i am loading data frm DSO to CUBE the job load is getting cancelled.
    in the job overview i got the following messages
        SYST: Date 00/01/0000 not expected.
       Job cancelled after system exception ERROR_MESSAGE
    wt can be the reason for this error as i have successfully loaded data into 2 layers of DSO before loading the data into the CUBE

    hi,
    Are u loading the flat file to DSO?
    then check the data in the PSA in the date field and replace with the correct date.
    i think u r using write optimised DSO which is similar to PSA it will take all the data from PSA to DSO.
    so clear the data in PSA and then load to DSO and then to CUBE.
    If u dont need a date field in CUBE then remove the mapping in transformation in cube and activate and make DTP activate and trigger it it will work.

  • While loading data from DSO TO CUBE.(which Extraction option)

    hi friends,
                     my questin is that when we load the data from one data target to another data target then we have four options to extract the data in DTP screen from (1.active data table (with archive) 2.active data table (without archive) 3.change log table. and fourth i dont remember.so my question is when we update data like from DSO TO CUBE. Then which option we should choose. 2nd or 3nd.?
    <removed_by_moderator>
    Edited by: Julius Bussche on Jan 4, 2012 9:26 AM

    - If you want to do a full load always select 2nd option i.e. Active Data Table (without archive).
    - If you wand to do a delta load, you can select either of 2 or 3
       Active Data Table (without archive) - first load will be full from active table and after that it will be delta from change log
       (ii) Changelog table - you will have to do a full load using a full DTP and then delta can be done using this DTP (but you will need to an init as well using this DTP)
    - if you have done using a full DTP and now just want to run delta, select 3rd option and do an init before running delta
    I hope it helps.
    Regards,
    Gaurav

  • Error while loading data from DSO to Cube

    Dear Experts,
    I have change update routines of the update rule for DSO & update rule between DSO & cube. when i uploading data in DSO , working fine. But when uploading from DSO to cube , it giving error.
    Error Message :
    DataSource 8ZDSO_ABB does not have the same status as the source system in the Business Information Warehouse.
    The time stamp in the source system is 30.09.2010 14:05:17.
    The time stamp in the BW system is 09.05.2008 16:41:10.
    I executed program RS_TRANSTRU_ACTIVATE_ALL , still giving same error.
    Regards,
    Anand Mehrotra.

    Dear Experts,
    Thanks for help.Problem solved.
    Regards,
    Anand Mehrotra.

  • Special character issue while loading data from SAP HR through VDS

    Hello,
    We have a special character issue, while loading data from SAP HR to IdM, using a VDS and following the standard documentation: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e09fa547-f7c9-2b10-3d9e-da93fd15dca1?quicklink=index&overridelayout=true
    French accent like (é,à,è,ù), are correctly loaded but Turkish special ones (like : Ş, İ, ł ) are transformed into u201C#u201D in Idm.
    The question is : does someone know any special setting to do in the VDS or in IdM for special characters to solve this issue??
    Our SAP HR version is ECC6.0 (ABA/BASIS7.0 SP21, SAP_HR6.0 SP54) and we are using a VDS 7.1 SP5 and SAP NW IdM 7.1 SP5 Patch1 on oracle 10.2.
    Thanks

    We are importing directly to the HR staging area, using the transactions/programs "HRLDAP_MAP", "LDAP" and "/RPLDAP_EXTRACT", then we have a job which extract data from the staging area to a CSV file.
    So before the import, the character appears correctly in SAP HR, but by the time it comes through the VDS to the IDM's temporary table, it becomes "#".
    Yes, our data is coming from a Unicode system.
    So, could it be a java parameter to change / add in the VDS??
    Regards.

  • Unable to load data from DSO to Cube

    Good morning all,
    I was trying to load data from DSO to Cube for validation. Before loading the new data, I deleted all from DSO and Cube. They contain no request at all. Cube has "Delta Update". First DSO was loaded 138,300 records successfully. Then Activated the DSO. The last when I clicked Exectue (DSO --> Cube), it loaded 0 record. I was able to load the data yesterday. What might be the reasons for this situation?
    Thank you so much!

    Hi BI User,
    For loading delta upload into the data target, there should be an initialization request in the data target with same selection criteria.
    So..first do the initialization and perform delta upload into the cube.
    Regards,
    Subhashini.

  • DTP load data from DSO to CUBE can't debug

    Hi,all expert.
    I met a problem yestoday.
    When I load data from datasource to DSO,and debug the start routine,it was ok.But when I load data from DSO to CUBE,and debug the routine,it got an error like this:
    inconsistent input parameter(parameter:<unknow>,value <unknown>)
    message no: RS_EXCEPTION 101.
    I don't know why,PLZ help me,thank you very much.

    Hi,
    An alternative way to do this is to have a small code for infinite loop in your start routine. And when you start the load goto SM50 and debug the process which is executing the load, from there you can close the infinite loop and carry on with the debugging. Please let me know if you require further information.
    Thanks,
    Arminder

  • Error while loading data from DS into cube

    Hello All
    I am getting the below error while loading data from Data source to the cube.
    Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20070331
    Wht am i suppose to do?
    Need ur input in this regard.
    Regards
    Rohit

    Hi
    Simply map 0calday to 0fiscper(you already done it)..You might have forgotten to map fiscal year variant in update rules....if it comes from souce,just map it..if it won't comes from source...make it as constant in update rules and give value..
    If your business is April to March make it as  'V3'
    If your business is January to Decemeber make it as 'K4'..
    activate your update rules delete old data and upload again....
    Hope it helps
    Thanks
    Teja

  • Error while loading data from ODS to CUBE.

    Hi friends,
    When l am loading data from ODS to Cube with help of data mart, I am getting error in QA system , IN  DM system ,every thing went well.IF i see the detail tab in monitor under Processing .
    Its is showing like this .
    Transfer Rules : Missing Massage.
    Update PSA : missing massage.
    Processing end : missing message.
    I have checked the coding in update rules, everything is ok.
    Plz any inputs.
    hari
    Message was edited by:
            hari reddy

    Might means that IDocs flow is not defined properly in your QA system for myself-SourceSystem.
    Regards,
    Vitaliy

  • Errror while loading data from dso to info cube....

    Hi All,
    When i am running dtp from dso to cube i get a error i.e :
    1.  Data package processing terminated
         Message no. RSBK229
    2.  'Processed with Errors'
         Message no. RSBK257
    3. Error while updating to target 0FIGL_C10 (type INFOCUBE)
        Message no. RSBK241.
         So these are the errors i am getting , i am new to BI so how could i solve this errors....
         All the transformation are active with no errors.
    Thanks in Advance
    Regards,
    Mrigesh.
    Edited by: montz2006 on Dec 7, 2009 8:45 AM

    Hi All,
    Now i deleted data from dso and data source and again run the dtp,
    this time i got data from data-source to dso but , when i am running dtp between dso and cube , i am not finding an error.
    Now when i go to cube and see the data the request has came but data has not transferred .....
    The Request Status is green in cube but data is not cuming....
    Regards,
    Mrigesh.

  • Error while loading data from DSO to Infocube

    Hi all,
    I'm loading data from flat file to the cube via a DSO. I get an error in the DTP.
    The data loads to the DSO, i'm able to see the contents in the active data table.
    Transformation from DSO to Cube is activated without any errors. Its a one to one mapping. No routines used.
    When i execute the DTP ( i use full load option as it is a one time load) i get the following error in DTP: All of which are Red.
    Process Request
    Data Package 1: Error during processing
    Extract from DSO  XXXXX
    Processing Terminated
    The long text of the error gives the msg:  Data package 1: Processed with errors    RSBK257
    Thanks

    Hi,
    You can check the below forums.
    DTP with error RSBK257
    - Jaimin

  • Error when loading data from DSO to Cube

    Hi,
    After upgrading to 2004s we get the following error message when trying to load data from a DSO to a Cube:
    Unexpected error: RSDRC_CONVERT_RANGES_TO_SELDR
    Has anyone experienced a similar problem or have some guidelines on how to resolve it?
    Kind regards,
    Fredrik

    Hej Martin,
    Tack!
    Problem solved
    //Fredrik

  • Dump when loading Data from DSO to Cube

    Hi,
    i get a short dump DBIF_REPO_PART_NOT_FOUND when trying to load data from a dso to a cube. From DSO to DSO it works fine.
    any idea`s?
    thx!
    Dominik

    the Dump occurs in the last step of the last data pakage in the DTP Monitor.
    I checked the OSS note, but i don´t know how to check the kernel version.
    Now i used another DSO for testing and i got another Dump with a different name.
    After that i logged in again and it works with my test DSO data...
    But still not working with the original one...
    @Kazmi: What detaisl u mean exactly?

Maybe you are looking for