Send 2 MobileMe Problem

Hello,
when i take a picture (not landscape) and i'll send it through the camera.app to my mobileme gallery, it automaticly rotate the picture when i try to watch the gallery through IE8 or Safari. When i make a screenshot for example and upload it from camera.app as well, it won't automaticly rotate the pic.
So how i can stop mobileme gallery auto rotate my pics from ipodtouch

Tried a reset? (Press and hold home and sleep/wake buttons until you see the Apple logo, ignoring the slide to power off prompt.)
Else, try a Restore in iTunes.

Similar Messages

R/3 to XI manually IDOC sending and problem:

R/3 to XI manually IDOC sending and problem:
I sent IDOC using we19 transaction from R/3 system. After sending it asks me userid and password for XI system. I give necessary UID and PASS. R/3 system says me sucessfully sent.
I check XI (sxmb_moni) but there is nomessage there.
Problem 1: I don't want R/3 ask me UID and password for XI access
Problem 2: I want to see message in XI (sxmb_moni)
Thanks

Hi Cemil,
>>>>After sending it asks me userid and password for XI system. I give necessary UID and PASS. R/3 system says me sucessfully sent.
check the RFC destination from R3 to XI (SM59)
you will find the right one from your port (We21)
you can also check step by step procedures
for IDOC - XI in my book:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi">Mastering IDoc Business Scenarios with SAP XI</a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

HT5934 my phone switched off even 60% charge (pls send me problem)

sir my phone is suddenly switched off even 60% charge
pls send me problem
regards for you
venkata ramarao

Try following these steps:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
(from http://support.apple.com/kb/TS2802 )

Problem sending MobileMe email from iPhone

Hello
I have a new iPhone, MacBook and MobileMe subscription. The address from MobileMe when I send email from my Mac is [email protected] but when I send email from my iPhone it is [email protected] I have in theory followed all the instructions yet cannot get it to do otherwise. Any suggestions appreciated
Cheers
Ben

This is because the SMTP server you have configured does not permit connections from off the ISP's network. When you are connecting via EDGE this is off-network from the perspective of the ISP.
Here are some hints from Apple on this problem:
http://docs.info.apple.com/article.html?path=iTunesWin/7.3/en/2637.html
You didn't say who your ISP is, but here are some common settings ISPs in various countries:
http://docs.info.apple.com/article.html?artnum=306990
As a last resort in the US you can set the outgoing SMTP server to cwmx.com:25 with no user ID or password. This will work on EDGE only, not on WiFi.

Cannot send MobileMe mail from Mail in Lion

I installed Lion the day after it came out, and had no problems initially. 3 days ago, however, Mail stopped being able to send messages from my MobileMe account. Every time I try to send a message, I get the following error:
Any idea what could be causing this? I can receive mail fine, and I have no problems sending if I use the MobileMe web interface. It is only through the Mail application that I cannot send. This is very inconvenient, and I'd be grateful for any help anyone can provide. Thank you!

I am having a similar problem. Upgraded to Lion. Then accepted the Mobile Me request in Mobile me which seemed to move the calendar and email to a different synching method. But most important is that I have several mobile me email accounts and now when I go to send an email from any of them the sent message just hangs and hangs. If I send it from a gmail account no problem! I tried the fix you posted above but that did not seem to work. Also, strange is that occassionally an email will send from the mobile me account but after only after waiting for a while? Any Help is appreciated!!!

Roadrunner/cwmx and Invalid sender address problems

I have spent hours trying to fix problem with Road Runner email when not connected to rr via wifi.
Background: rr doesn't allow smtp outgoing if you aren't connected to their cable. Thus you have to be on wifi from your cable router. So, many folks turn on ATT cwmx.com smtp server to send mail when on 3G or Edge. iPhone email is supposed to try next smtp server if first one fails. But when sending mail many folks are getting "Invalid sender address" error message.
I had thought the error message was coming from cwmx but now think that it is coming from road runner's smtp server and the iPhone is not going on to the next smtp server, i.e. cwmx.com.
Maybe this is the problem/bug. I know there are some other bugs in iPhone mail app. For example I have 4 smtp servers showing in "Other SMTP servers" all with the same address and there is no way to delete the duplicates.

It is usually the ISP being used for the internet connection with the SMTP server restriction.
Most, if not all ISPs block the use of SMTP servers that are outside of their network (or that isn't provided by the ISP) unless the SMTP server is authenticated.
Most ISPs don't provide/support an authenticated SMTP server, and Time Warner is one of them. If TW provided/supported an authenticated SMTP server for RoadRunner accounts, using RR's SMTP server wouldn't be an issue regardless the internet connection.
I access my MobileMe account and a business POP account with the iPhone's Mail client. Both accounts have an authenticated SMTP server and I've never had a problem sending with either account regardless my internet connection - via numerous wi-fi connections with different ISPs or via EDGE with my first generation iPhone, or via 3G or EDGE with my iPhone 3G.
These restrictions are in place as a part of an overall effort to prevent spam emanating from the ISP's domain.

Send email problem

Hi,
I have great problem with my mail. I can get emails, but if I try to answer or send new email after few minutes the system open window and say: Cannot send message using the server. Select a different outgoing mail server from the list below. (I have 4 different servers including the default one: smtp.me.com:vybiral) I see that 3 servers are marked offline and smtp.me.com:vybiral is not marked. I can not send email from any of this servers. But from my iphone email it works good.
The problems started sinc my mobile me account expired. After few days I did renew the account and the problems with sending emails started. If I log on my mobileMe throu web I can send emails as well. The problem is only in my mail aplication in notebook.
Can you help me to solve the problem? Thank you very much.

I'm having the same problem. It started after I updated to the latest security update today.

Mail can't send mobileme mail

On two iPads, mobileme mail gets stuck on 'sending'. It periodically will say that smtp.me.com failed. I've tried deleting the account to no avail. I can receive email and browse the internet no problem.
Possibly related, I upgraded my router to a Time Capsule at about the same time this started happening, but I can't be sure it is the problem. I have an iMac on the same wireless network that can send email from the same address.

I don't think it would make sense that the router would haveanything to do with it. I am having the same issue, but only from the Mac Mailapp. My iPad and iPhone have no issues sending Mail. For whatever reason, theapp couldn't send mail the day of Apple's announcement of iCloud and theclosing of MobileMe. It shouldn’t affect it because MobileMe will still bearound until next year but I still think it’s a little weird.

Mail not Sending MobileMe Emails

Hi All,
I am having a problem sending emails using my mobileme address on Mac Mail. I receive emails fine, but whenever I try to reply or send a new email using that account, it just stalls and then finally shows the error message below. Also, if I sign into MobileMe online, I can send and receive fine, so it's something to do with the Mail App.
I have 5 other email addresses that I use on Mac Mail (gmail, aol, etc) and they all work fine (sending and receiving).
Thanks!
Jennilyn

I'm not sure... I thought they are the same things.
When I compose an email my options of which to send from are:
I think the first two are the same thing (aliases of one another). I didn't add them seperately, they are one and the same under the Mac account:
Thanks Again... I really just want to be able to use my mac account because it's my main/default email address.

Lion server - mobileme problem

this is a little bit confused.
since i installed the server and clicked on the push notifications from apple (i think) i can´t send mails from my imac (imac is the server) receiving is no problem.
i read all the problems with mobileme on the community and tested all out, nothing work. (delete account, delete prefs, set all the same like on my mba...)
when i sent a mail (mobilme) then for a second or so appears a notification from mail. i catched it with screen shot. it says:
mail tries to certificate my mail and it fails, and it should be a certificate and a key in the keychain.
wired is that the tlf certificate in the mobileme account is off. i tried also put it on and select each other, but nothing works.
i don´t know about certificate...
p.s. little snitch is ok

Thanks, however when I tried
sudo -s launchctl load -w /System/Library/LaunchDaemons/ftp.plist
it gives me
bind (): Address already in use
com.apple.ftpd: Already loaded
but i still can't get ftp to work

10.5.8 server postfix sender domain problem

Hi,
I set up my power mac g5 as web and mail server. Everything is working wihout problem except this issue.
ı configure my webmail as webmail.xxx.com. when i try to send mail from mail server to other servers, i can see my mails in queue , i saw sender mail address as [email protected] if i change webmail adress to example.xxx.com this time i saw [email protected]
All the mail recipients saw like this. When i first think this must be a postfix configuration prorblem. i cannot see an extra settings about this in server admin panel.
So i changes the main.conf fie of postfix for smtp settings there are two choise $mydomain or $myhostname.
i caned it to mydomain but nothing changed. How can i fix it ?
Best regards

Is this a problem that only happens when sending from the webmail (SquirrelMail) client, or from all email client apps (Apple Mail, Outlook, Thunderbird, etc.)??
SquirrelMail, by default, uses the hostname entered in DNS as the originating address. So if you log in as User_1 and send via SquirrelMail and your email server is desginated as mail1.example.com, the sending address will show as "[email protected]"
You can over-ride this in the Settings of for each user in SquirrelMail by setting the email address to the proper value, as "[email protected]"
-Doug

Sender RFC-Problem in SM58

Hi all,
Currently I am working on RFC synchronous call with out using BMP.
Here we have developed two asynchronous RFC call to achieve the above requirement.
Here are the details,
1. A call from FILE-XI-RFC (Receiver), for sending the selection criteria
2. Another call from (Sender) RFC-XI-FILE for sending the response back.
Here I am going to call 2 RFCs to get the response back. Here when I am working with the scenario (2) i.e., sender RFC, I have done all the design and configuration part of it.
And when am trying to test this sender rfc from a sample ABAP report (with COMMIT WORK) the RFC gets executed without any error but when I check in SM58 all the back ground tasks gets queued and are not getting processed further.
Can anyone please help me out? Is it a configuration problem in XI or in ABAP.
Please help me. Its very urgent for me.
Thanks in advance,
-kanth.

Hi,
did you try to push the entries in SM58 -> F6 ?
do you see any error ?
also check out my blog:
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
to see if your RFC to XI is correct - you can test it from sm59
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Anyone has a remedy for mail/leopard sending emails problem ?

I just spend hours on my MBP trying to set up MAIL and on various forums trying to find a cure for what seems to be a common problem on Leopard, not being able to send emails. I like many others are getting the "can not send message using the smtp server verify that you have addressed this message correctly. Check your SMTP server settings in Mail Preferences and verify any advanced settings with your system administrator"
Ok I verified till I was blue, all settings are ok, info provided by ISP and checked, I tried various other combinations and I keep getting the same message. I can receive emails no probs and I can also send emails to myself . I looked on Apple site and it just tells me to check everything, yes it's a known problem but no cure in sight.They simply can't be serious and expect people to be without such an important function? So this means that I cannot send emails until someone gets off their a**e at Apple and fixes this problem ? Can any of you kind folks help, what else should I try ? I have been on Apple now for half a year but encountered same problems and grief as I had with windows for years.

found problem
im using aol still
aol just implimented a image verification (stupid) i downloaded the new aol desktop for mac and tried sending a test email.. it asked me to verfiy myself and now it works... dumb
so if you have same problem, download aol desktop for mac and send a test email, it will tell you do a image verfication.. do it and then it will say you can now send email...
how stupid... like the login/password wasn't enough...
and now i just can't even imagine why they are loosing money and almost gone (aol)

Sender JDBC Problem

Hi
can any one hlp me..
My scenrio is JDBC is sender and file is Receiver.
problem is JDBC adapter is hitting the SQL server and retrived the data and Inbound message and Receivng Grouping Payload ..like this..
<?xml version="1.0" encoding="utf-8" ?>
- <resultset>
- <row>
<TransactionNumber>118</TransactionNumber>
<CompanyCode>1004</CompanyCode>
<CustomerNumber>1368986</CustomerNumber>
</row>
Response payload is showig only name space..of frist two lines..
<?xml version="1.0" encoding="UTF-8" ?>
<ns0:resultset_mt xmlns:ns0="urn:Poll_Database_File" />
even MessageData and Audit logs showing successfully delivered ..
Other than soap content in Message Content showing only name space of xml...first two lines..
So please let me know , where i did mistake?
Regards..Rambarki

Sharavan..the SQL statement is working fine..
otherwise i wont get this payload in Inbound Message
<?xml version="1.0" encoding="utf-8" ?>
- <resultset>
- <row>
<TransactionNumber>118</TransactionNumber>
<CompanyCode>1004</CompanyCode>
<CustomerNumber>1368986</CustomerNumber>
</row>
- <row>
<TransactionNumber>254</TransactionNumber>
<CompanyCode>1004</CompanyCode>
<CustomerNumber>2755685</CustomerNumber>
</row>
see u can find the data in payload..but thing is repsonse payload showing like this..
<?xml version="1.0" encoding="UTF-8" ?>
<ns0:resultset_mt xmlns:ns0="urn:Poll_Database_File" />
only..
i didn;t understand..what is this error/
regards
sankar

Sending mail Problem (Urgent Please)

The following program mail coding program. I am in local System. Host is my server. But our Server (norton) firewall is enabled. I am not able to send any mail. Will you please tell me How to recover this problem or alter my coding. If anybody knows Please tell me.
<html>
<head>
<title>JSP JavaMail Example </title>
</head>
<body>
<%@ page import="java.util.*" %>
<%@ page import="javax.mail.*" %>
<%@ page import="javax.mail.internet.*" %>
<%@ page import="javax.activation.*" %>
<%
try
String host = "xxx.xxx.x.x";
String to = request.getParameter("to");
String from = request.getParameter("from");
String subject = request.getParameter("subject");
String messageText = request.getParameter("body");
boolean sessionDebug = false;
Properties props = System.getProperties();
props.put("mail.host", host);
props.put("mail.transport.protocol", "smtp");
Session mailSession = Session.getDefaultInstance(props, null);
mailSession.setDebug(sessionDebug);
Message msg = new MimeMessage(mailSession);
msg.setFrom(new InternetAddress(from));
InternetAddress[] address = {new InternetAddress(to)};
msg.setRecipients(Message.RecipientType.TO, address);
msg.setSubject(subject);
msg.setSentDate(new Date());
msg.setText(messageText);
Transport.send(msg);
out.println("Mail was sent to " + to);
out.println(" from " + from);
out.println(" using host " + host + ".");
catch(Exception e)
System.out.println("Error");
%>
</table>
</body>
</html>
Please tell me how to recover this problem
Thanks in advance
regards
pooja

Please tell me my mail coding is correct. If correct but i am not able receive any mail. what is the problem do u know. If you know please tell me
regards
pooja

Send 2 MobileMe Problem

Similar Messages

Maybe you are looking for