Send a mail after Post Document

Hi,
My proiblem is : I have a Parked document wich it has to be posted  in FBV0 or MIR7 ... after that an Specific user Should receive a mail..
Somebody knows a exit/badi/BTE  for solving my problem?
Thanks

Hi
For MIR7, see SAP Note 1156325 - BAdIs in the Logistics Invoice Verification environment and check the possibilities to do it.
I hope this helps you
Regards
Eduardo

Similar Messages

  • Send e-mail after change document status solar02

    Hi...
    How is possible to send an e-mail for someone or a group, when a especific document status is changed to a new value?
    Thanks in advance,
    Warlei Figueiredo

    Hi Federico,
    Thanks for your tip about how to send an email. So, I am trying to send email in my scenario and I don't know if I am choosing the correct type status. I have two questions:
    1 - In SE16 transaction, into table TJ30 I dont know what transaction type to select?
    2 - Is necessary choose "Depend Partner"? I don't know what kind "Depend Partner" is possible to choose.
    Reminder, my necessity is to send an email to someone (doesn't matter in this moment, could be an especific user your choose) after an specific document into solar02 changed status from "A" to "B".
    Thank you if possible to help me.

  • How I fixed the "can't send e-mail after upgrade to 10.5.6" problem

    Like many of you I couldn't send e-mail after the upgrade. After trying everything including re-install combo update, delete and resetting profile, etc. the thing that made it work was:
    1. custom set the outgoing server port number to 25 (for Verizon, ask your ISP the output port number)
    2. ensure the password authentication is set for outgoing e-mail.
    Goto account setting, "Outgoing Mail Server (SMTP)", select "Edit Server list"
    Under "Account Information" make sure "Description" is blank (as suggested in other posts)
    Under "Advance Information", select Use Custom Port: type in the port number
    On Authentication, select password, type in user name and password as in "incoming Mail Server"
    Save it and test if it works.
    It seems selection of the default outgoing port has some problems, even though 15 is one of the three defaults.
    Scott

    I just switched to Roadrunner and am having the same "can't send email" problem. I have done what you suggested, but the problem persists. I did note that in my outgoing mail server box it says: smtp-server.wi.rr.com:jzelinger3 (Offline). I'm not sure where the "Offline" is coming from or why it is there. Any suggestions? I performed the following Terminal tests with a tech. support person from Roadrunner:
    Last login: Wed Jan 21 19:36:52 on console
    CPE-75-86-226-41:~ joan$ telnet pop-server.wi.rr.com 110
    Trying 71.74.56.78...
    Connected to pop-server.wi.rr.com.
    Escape character is '^]'.
    +OK POP3 server ready.
    user [email protected]
    +OK please send PASS command
    pass laikatess
    +OK [email protected] is welcome here
    telnet smtp-server.wi.rr.com 25
    -ERR Invalid command; valid commands: CAPA, DELE, LIST, LAST, NOOP, RETR, RSET, STAT, TOP, UIDL or QUIT
    This is very frustrating.
    J. A. Zelinger

  • User Exit after posting document (FB01)

    Dear all,
    I want to change the BSEG entries based on a mapping table.
    Is there any User Exit after posting document. I debuged long time and couldnt find any User Exit where u can change the BSEG.
    Thank u very much!
    best regards

    thank u for ur answer. I know it but not really! I know there is also an option. But my question here:
    -> Is here no User Exit where I can change the BSEG?
    -> It is possible to write a normal ABAP code in the substitution?
    Thank u very much

  • Manual account clear but can see line item after post document

    Hi Guru!
         I have post account clear with transaction code F-03  with open item zero balance such as
    account 214001 balance +500
    account 214001 balance -500
    when I simulate entry the system not show line item for post document but can post it . I want to know why ?
    thank you very much .

    Dear,
    This is standard behaviour...if line item which you are clearing have zero balance then system will not show any line items since open itemss are cleared....
    when you have tolerance difference or the residual posting then only system will show the line item....
    Regards,
    Chintan Joshi

  • Can not send e-mails after iOS5 upgrade

    I upgraded my wifes iPhone to iOS 5. After the upgrade she can receive e-mails but can not send them. All the composed e-mails end up in her outbox. I click on the error and it says "The connection to the outgoing server "smtp.***.com" failed. Additional Outgoing Mail Servers can be configured in Setting>Mail, Contacts, Calenders."
    Anyone have any suggestions?

    Go to Settings => Mail,Contacts,Calenders => select the account and may have to click account again => should be viewing username and password, Scroll down and Select - Outgoing Server => Tap on Primary Server => try entering Username and Password in there even though it says optional... Also try port 25 if that doesn't work and try toggling SSL on/off if that doesn't work.

  • OIM stopped sending notification mails after patch

    Hi all,
    We're currently developing an OIM system for a client. We patched the system using patch #8484010 from 9.1.0.1 to 9.1.0.2, after which the system wasn't able to send any task assignment notification mails to the assignee. I'm not 100% sure that it has something to do with the patch, but it seems like it has. There is nothing significant in the logs, even with relevant logging levels set to ALL. Did anyone else stumble upon such an issue? If not, does anyone have a clue?

    Try following the instructions in the below thread to fix the issue.
    https://discussions.apple.com/message/18170959#18170959

  • Cannot send msn-mail after the update

    After the update of OS X, I cannot send email (via httpmail) using my "old" msn account through Mail (prior to the update, I had no problems). Getting the mailbox updated, reading mails etc. is not a problem.
    Tried reinstalling httpmail.
    Tried changing the Server Port to 587.
    Hints would be highly appreciated.
    Lars

    Mail.app is short for the Mail application that I assume you are using as your email client to receive and send messages with your email accounts.
    If this is correct and to confirm, you are accessing an email account provided by your ISP (which is Verizon) with the Mail.app in addition to your Hotmail account and you are able to send messages with your Verizon account but not with your Hotmail account.
    If correct, go to Mail > Preferences > Accounts and under the Account Information tab for your Hotmail account preferences at the SMTP server selection, select the Verizon SMTP server to send messages with your Hotmail account and when quitting Preferences, select OK to save the changed setting when prompted.

  • Sending e mails after Spell Check

    My e mails do not send after spell check is complete. The e mail goes through spell check and when I am done and close the spell check window it doesn't automatically send. I then have to click the send button again. Any suggestions?

    It is working as I wanted now. In Mail I did the following: Mail>Preferences>Composing, then in the top dialogue box Composing I chose Check Spelling> When I click Send. Not a very complicated solution but it works for me. When I finish an e mail and click send it now goes through the spell check and then automatically sends once I finish the spell check. I hope that is what you were asking.
    B

  • Can't send e-mail after upgrading to Leopard

    I recently upgraded my OSX from Tiger to Leopard. When I log into my Mail account, everything appears to be working fine; I can receive mail, compose messages, etc. But the "Send" button is grayed out. I don't get any prompts asking for permission to send -- it's simply not an available option. Is this fixable, or do I need to re-install?

    From the Mail menu, select "Preferences". Hit the Accounts tab. Select the Account. Under Account Information, reapply the user name and password.
    Check with the provider if the account needs authentication. This is in the Advanced tab. Usually just a repeat of user name and password.

  • Cannot send Yahoo mail after IOS 4 upgrade iPod touch 3G

    Hi,
    Using a free Yahoo account configured by entering username & password. Can receive mails OK but fail to send with the error "A copy has been placed in your Outbox. The sender address "<[email protected]>" was rejected by the server". Was working perfectly for months prior to upgrade. Any thoughts?
    Thanks

    Having the same problems with my "PTD" email account. Before iOS 4 it worked fine, now I can receive emails with no issues but I cannot send them, they will not go through.

  • Cannot send internal mail after basic setup

    I have setup Exchange 2013 SP1 on Server 2012R2 from scratch. I have added AD users and setup all the mailboxes for them.
    However, when I try to send email from OWA to internal mail accounts, other users cannot receive and mail at all.
    I have tried to send a email to my own account and I still cannot receive anything.
    There is no other setting I have done at all.
    Please let me know what information I need to provide to solve the issue.

    Hi,
    From your description, I recommend you follow the steps below for troubleshooting:
    1. Enable "Basic Authentication" on the properties of Receive Connector.
    2. Use the Test-ServiceHealth cmdlet to check if all the Windows services that Exchange server requires are running. Especially the Exchange Transport service and Mailbox transport service.
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • My iPad can not still sending e-mails after several informations on the internet forums

    Who can help me. I have tried many options from the internet to get my iPad connected with my outgoing e-mail but nothing helps. I changed everything SSL on and off changed the port into. 587,25 or 225. What do I wrong? Provider is Tele2 with Versatel SMTP.

    Thanks Brian,
    i have deleted account and added back numerous times as well as doing hard turn off and re booted many times.
    thanks for replying.

  • Started having "smtp timeout error" when sending e-mail, after installing Thunderbird update on 1.4.15 .How to undo the update?

    Thank You!

    has you anti virus vendor sent their update yet to fix the problem?
    If not, turn off outgoing email scanning in your anti virus program.

  • Sending e-mail using fm 'SO_DOCUMENT_SEND_API1'

    Hi Experts:
                     I have done a ABAP program that sending e-mail for attached document from ABAP.
                     And it's OK.
                     The e-mail addresses are all in TO mail position,now i want some addresses in CC mail position.
                     The FM i using is ''SO_DOCUMENT_SEND_API1',the address parameter in code as below:
                                   T_RECEIVERS-RECEIVER = ITAB-T_MAIL.
                                   T_RECEIVERS-REC_TYPE = 'U'.
                                   T_RECEIVERS-COM_TYPE = 'INT'.
                                   T_RECEIVERS-NOTIF_DEL = 'X'.
                                   T_RECEIVERS-NOTIF_NDEL = 'X'.
                     Pls give me some advice,thank you very much.

    Hi,
    Do these steps:
    During appending data to reclist
    suppose RECLIST is your recevers table :
    for cc use addtional
    RECLIST-COPY = 'X '.
    for bcc use
    RECLIST-BLIND_COPY = 'X '.   -
    >Just for your info
    May it helps you.
    Regards.
    Deepak Sharma.

Maybe you are looking for