Send a mail to the message creator

Hi,
Can anyone help on SAP note 554951, i tried to do this but doesnt seem to work.
Can anyone please explain the step by step procedure to set this up?
Thanks a lot
Keshi

Hi
Check the following link and also sdn threads:-
http://help.sap.com/saphelp_crm40/helpdata/en/ec/700b3b5d6d924fe10000000a11402f/frameset.htm
SOLMAN - Support Desk - Sent an email to the creator...
Re: Sending an automatic mail on changing message status
Mail during the creation of Support Message
Please reward points.

Similar Messages

  • Trying to send e-mail and error message " a copy has been placed in your outbox. the sender address was rejected by the server"

    trying to send e-mail and error message " a copy has been placed in your outbox. the sender address was rejected by the server"

    i have the same problem with my 3gs and tried to add my email acc+pass in the outgoing server but it got rejected.
    just bin on the phone(45min) with my carrier support about this issue they are pretty much scratching there head, the settings i should use gets verified with no problems when i add the outgoung server, but still cant send mails.

  • My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no lo

    My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no log in required.
    After trying lots I found now in 'Airport Utility is 'unable to detect any airport wireless devises.....'
    There is no provider to be seen in airport utility and only 'rescan' is an option with no results...
    even so I am connected and can browse the net receive mail etc. and the outgoing 'mail server' is set to the internet provider I am connected to.
    Can you enlighten me what can I do I need to use my e-mail program urgently !!!
    Thanks for your help

    I'm not sure what "IPS wireless" is, but unless you have an Apple Wi-Fi base station (such as a Time Capsule, AirPort Extreme, or AirPort Express), AirPort Utility won't see anything.
    You might try defining a new SMTP server to see if that will work any better.
    By the way, the subject field for these messages isn't intended to hold a lot of text.  Put a short description of your problem in the subject field and save the rest of your message for the body field.

  • How to create  a procedure to send a mail if the Database is down?

    Hi,
    I have created the below procedure to send a mail if the count is less than 1300. It scheduled daily @ 15 30 hrs. Its fine.
    CREATE OR REPLACE procedure SCOTT.hrsmail
    is
    v_count number;
    begin
    Select count(*) into v_count from emp;
    if v_count < 1300
    then
    UTL_MAIL.send(sender => '[email protected]',
    recipients => '[email protected]',
    cc => '[email protected]',
    bcc => '[email protected]',
    subject => 'Testing the UTL_MAIL Package',
    message => 'If you get this, UTL_MAIL package
    else
    null; --what you want to do here
    end if ;
    end;
    Sometime the Database is down, so the job is not running.
    How to create a procedure to send a mail if the database is down?
    Pls help me. Its highly appreciated.
    Thanks
    Nihar

    nihar wrote:
    How to create a procedure to send a mail if the database is down?And what if the database is up, but the network down? Or the database up and mail server down? Or mail server undergoing maintenance?
    There are loads of "+What if's+" - and in that respect, playing "+What if database is down..+" in this case does not make any sense. You do not use the database to monitor its own up/down status. You do not rely just on SMTP as notification protocol that the database is down.
    The correct approach would be using something like SNMP as the monitoring protocol. A monitoring system that can process SNMP and perform some basic root cause analysis (e.g. network to the database server down, database server status unknown). And this system supporting notification methods like SMTP, SMS and so on.

  • Send a mail to the customer when their order of type Residential Credit is booked

    Hi,
    We need to send a mail to the customer when their order of type Residential Credit is booked.
    I followed the below steps, but i could not write the code for sending email, can you please send me a sample code.
    Step1:
    =======
    Setup Processing Constraint on Order Header/Line for order booking
    *(Navigation : Setup --> Rules --> Security --> Processing Constraints)*
    a) Set Application : Order Management, Entity : Order Header
    b) Under constraints --> set Operation : Create, user Action : Raise Integration event, and make it enabled
    c) Condition --> Set Scope : Any, Validation Entity : Order header, record Set : Order, Validation Template : Booked and make it enabled too.
    Step2:
    ========
    Profile Option: Set "OM: Electronic Message Integration Event Sources" to be set to All
    Step3:
    ========
    Develop a code(Package) /workflow as per business requirement. e.g sending mail to customer when order is booked.
    Step 4:
    =======
    Open business event *"oracle.apps.ont.oi.xml_int.status"* through workflow Administrator responsibility. Include code/workflow in the subscription section of Business event.
    Navigation : WF Administrator Web application ---> Administrator Workflow --> Business Events
    Search Name : oracle.apps.ont.oi.xml_int.status, it will return 1 record, click on subcription...
    In this page include the function e.g CLN_CH_EVENT_SUBSCRIPTION_PKG.ADD_COLLABORATION_EVENT_SUB, if you are using WF, mention (e.g) wf_rule.default_rule in function & Workflow as OEEM/WRITE_HISTORY and enable it in this page..
    Thanks and Regards,
    Priya

    Just wanted to let you guys know that I still haven't received my MP3 player... Creative has had the MP3 player for 73 days now and they still haven't sent it back. Since last time I wrote here I got an e-mail from Creative saying they got the MP3 player on the 5th of the November and that somehow the status wasn't updated. Well, it's been 73 days now, care to send it away? I sent them and e-mail yesterday where I wrote that they could just send me the cash for it or a new MP3 player.
    If I don't receive my MP3 player in a near future I will contact "Allm?nna Reklamations N?mnden" (a Swedish "Consumerist"-like government sponsored organization that deals with people vs company legal cases).
    Again, I strongly advise everyone to not buy any more Creative products. Once they break you won't get the help you need.

  • Send a mail to the vendor at the time of approval with the attachment of PO

    Hi all,
    I want to send a mail to the vendor at the time of approval by attaching the pdf of that particular PO.
    How can I achieve this?
    I know the User Exit where the code should be written.
    But I want the solution for attaching the PDF of PO at the time of approval.
    Please help me in this regard.
    Edited by: vinil kumar aturi on Mar 16, 2009 7:52 AM

    Hi,
    Try Following Code to Send mail as PDF Attachment
    In this
    Smart form Name : ZSMART_MM_003
    This will send mail to EMAIL ADDRESS SPECIFIED IN VENDOR MASTER FK03
    This code is written for ME23n so we used nast-objky(10) for purchase order no you may replace it with your purchase order no
    and smart form name with your smart form name
    *-- Send Mail---
    *-- Function Module Call to get Customer Address (Email)--
    DATA: VENDOR TYPE ELIFN,
          ADDRNO TYPE ADRNR.
    DATA: atab-mail TYPE STRING.
    SELECT SINGLE LIFNR FROM EKKO INTO VENDOR WHERE EBELN = nast-objky(10).
    SELECT SINGLE ADRNR FROM LFA1 INTO ADDRNO WHERE LIFNR = VENDOR.
    TYPE-POOLS: szadr.
    DATA adr_kompl TYPE szadr_addr1_complete.
    DATA adr1 TYPE szadr_addr1_line.
    DATA adtel TYPE szadr_adtel_line.
    DATA admail TYPE szadr_adsmtp_line.
    DATA adfax TYPE szadr_adfax_line.
    CALL FUNCTION 'ADDR_GET_COMPLETE'
           EXPORTING
                addrnumber              = ADDRNO
           IMPORTING
                addr1_complete          = adr_kompl
           EXCEPTIONS
                parameter_error         = 1
                address_not_exist       = 2
                internal_error          = 3
                wrong_access_to_archive = 4
                OTHERS                  = 5.
    Mail
      LOOP AT adr_kompl-adsmtp_tab INTO admail.
        MOVE admail-adsmtp-smtp_addr TO atab-mail.
      ENDLOOP.
    if sy-subrc = 0.
      DATA: FILENAME TYPE STRING.
      CONCATENATE 'PurchaseOrder' nast-objky INTO FILENAME SEPARATED BY '-'.
      DATA: MESSAGELINE1 TYPE STRING,
            MESSAGELINE2 TYPE STRING.
    CONCATENATE 'Do you want to send ' FILENAME ' through E-mail to' into MESSAGELINE1.
    CONCATENATE atab-mail '?' into MESSAGELINE2.
      data: answer    TYPE c.
      CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
           EXPORTING
                defaultoption = 'N'
                textline1     = MESSAGELINE1
                textline2     = MESSAGELINE2
                titel         = ' '
                start_column  = 35
                start_row     = 10
           IMPORTING
                answer        = answer.
      IF answer EQ 'J' OR answer EQ 'Y'.
    Code to find Contact person
        DATA: CONTACT TYPE EVERK.
        SELECT SINGLE VERKF FROM EKKO INTO CONTACT WHERE EBELN = nast-objky(10).
    Internal Table declarations
        DATA: I_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,
              I_TLINE TYPE TABLE OF TLINE WITH HEADER LINE,
              I_RECEIVERS TYPE TABLE OF SOMLRECI1 WITH HEADER LINE,
              I_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
    Objects to send mail.
              I_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
              I_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
              I_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
              I_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
    Work Area declarations
              WA_OBJHEAD TYPE SOLI_TAB,
              W_CTRLOP TYPE SSFCTRLOP,
              W_COMPOP TYPE SSFCOMPOP,
              W_RETURN TYPE SSFCRESCL,
              WA_DOC_CHNG TYPE SODOCCHGI1,
              W_DATA TYPE SODOCCHGI1,
              WA_BUFFER TYPE STRING, "To convert from 132 to 255
    Variables declarations
              V_FORM_NAME TYPE RS38L_FNAM,
              V_LEN_IN LIKE SOOD-OBJLEN,
              V_LEN_OUT LIKE SOOD-OBJLEN,
              V_LEN_OUTN TYPE I,
              V_LINES_TXT TYPE I,
              V_LINES_BIN TYPE I.
              DATA :  s_control_parameters TYPE ssfctrlop,
                      s_output_options     TYPE ssfcompop.
                      s_control_parameters-getotf = 'X'.
                      s_control_parameters-no_dialog = 'X'.
                      s_control_parameters-preview   = 'X'.
                      s_output_options-tdnoprint = 'X'.
                      s_output_options-tdimmed   = ''.
                      s_output_options-tddest = 'LP01'.        "Spool: Output device
                      s_output_options-tdreceiver = sy-uname.
                      s_output_options-tdcover = ''.
             CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
             EXPORTING
                FORMNAME = 'ZSMART_MM_003'
             IMPORTING
               FM_NAME = V_FORM_NAME
             EXCEPTIONS
               NO_FORM = 1
               NO_FUNCTION_MODULE = 2
               OTHERS = 3.
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
             W_CTRLOP-GETOTF = 'X'.
             W_CTRLOP-NO_DIALOG = 'X'.
             W_COMPOP-TDNOPREV = 'X'.
             CALL FUNCTION V_FORM_NAME
             EXPORTING
                CONTROL_PARAMETERS = s_control_parameters
                OUTPUT_OPTIONS = s_output_options
                USER_SETTINGS = ''
                nast          = nast
                WA_ADDRESS    = WA_ADDRESS
             IMPORTING
                JOB_OUTPUT_INFO = W_RETURN
             TABLES
                addtel  = it_addtel
                addsmtp = it_addsmtp
             EXCEPTIONS
                FORMATTING_ERROR = 1
                INTERNAL_ERROR = 2
                SEND_ERROR = 3
                USER_CANCELED = 4
                OTHERS = 5.
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Convert SMartform to pdf
          I_OTF[] = W_RETURN-OTFDATA[].
          CALL FUNCTION 'CONVERT_OTF'
          EXPORTING
            FORMAT = 'PDF'
            MAX_LINEWIDTH = 132
          IMPORTING
            BIN_FILESIZE = V_LEN_IN
          TABLES
            OTF = I_OTF
            LINES = I_TLINE
          EXCEPTIONS
           ERR_MAX_LINEWIDTH = 1
           ERR_FORMAT = 2
           ERR_CONV_NOT_POSSIBLE = 3
           OTHERS = 4.
    IF SY-SUBRC <> 0.
    ENDIF.
          LOOP AT I_TLINE.
            TRANSLATE I_TLINE USING '~'.
            CONCATENATE WA_BUFFER I_TLINE INTO WA_BUFFER.
            ENDLOOP.
            TRANSLATE WA_BUFFER USING '~'.
            DO.
              I_RECORD = WA_BUFFER.
              APPEND I_RECORD.
              SHIFT WA_BUFFER LEFT BY 255 PLACES.
              IF WA_BUFFER IS INITIAL.
                EXIT.
                ENDIF.
                ENDDO.
    Attachment
                REFRESH: I_RECLIST,
                I_OBJTXT,
                I_OBJBIN,
                I_OBJPACK.
                CLEAR WA_OBJHEAD.
                I_OBJBIN[] = I_RECORD[].
    Create Message Body Title and Description
                I_OBJTXT = 'Sir, '.
                APPEND I_OBJTXT.
                I_OBJTXT = ''.
                APPEND I_OBJTXT.
                I_OBJTXT = 'Please Find Attached '.
                APPEND I_OBJTXT.
                I_OBJTXT = FILENAME.
                APPEND I_OBJTXT.
                I_OBJTXT = 'For your reference'.
                APPEND I_OBJTXT.
                I_OBJTXT = ''.
                APPEND I_OBJTXT.
                I_OBJTXT = 'Regards'.
                APPEND I_OBJTXT.
                I_OBJTXT = CONTACT.
                APPEND I_OBJTXT.
    *Mail Subject
                DESCRIBE TABLE I_OBJTXT LINES V_LINES_TXT.
                READ TABLE I_OBJTXT INDEX V_LINES_TXT.
                WA_DOC_CHNG-OBJ_NAME = 'Purchase Order'.
                WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
                WA_DOC_CHNG-OBJ_DESCR = 'Purchase Order'.
                WA_DOC_CHNG-SENSITIVTY = 'F'.
                WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
    Main Text
                CLEAR I_OBJPACK-TRANSF_BIN.
                I_OBJPACK-HEAD_START = 1.
                I_OBJPACK-HEAD_NUM = 0.
                I_OBJPACK-BODY_START = 1.
                I_OBJPACK-BODY_NUM = V_LINES_TXT.
                I_OBJPACK-DOC_TYPE = 'RAW'.
                APPEND I_OBJPACK.
    Attachment (pdf-Attachment)
                I_OBJPACK-TRANSF_BIN = 'X'.
                I_OBJPACK-HEAD_START = 1.
                I_OBJPACK-HEAD_NUM = 0.
                I_OBJPACK-BODY_START = 1.
                DESCRIBE TABLE I_OBJBIN LINES V_LINES_BIN.
                READ TABLE I_OBJBIN INDEX V_LINES_BIN.
                I_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
                I_OBJPACK-BODY_NUM = V_LINES_BIN.
                I_OBJPACK-DOC_TYPE = 'PDF'.
                I_OBJPACK-OBJ_NAME = 'smart'.
                I_OBJPACK-OBJ_DESCR = FILENAME.
                APPEND I_OBJPACK.
                CLEAR I_RECLIST.
                I_RECLIST-RECEIVER = atab-mail.
                I_RECLIST-REC_TYPE = 'U'.
                APPEND I_RECLIST.
                CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
                EXPORTING
                  DOCUMENT_DATA = WA_DOC_CHNG
                  PUT_IN_OUTBOX = 'X'
                  COMMIT_WORK = 'X'
                TABLES
                    PACKING_LIST = I_OBJPACK
                    OBJECT_HEADER = WA_OBJHEAD
                    CONTENTS_BIN = I_OBJBIN
                    CONTENTS_TXT = I_OBJTXT
                    RECEIVERS = I_RECLIST
                EXCEPTIONS
                    TOO_MANY_RECEIVERS = 1
                    DOCUMENT_NOT_SENT = 2
                    DOCUMENT_TYPE_NOT_EXIST = 3
                    OPERATION_NO_AUTHORIZATION = 4
                    PARAMETER_ERROR = 5
                    X_ERROR = 6
                    ENQUEUE_ERROR = 7
                    OTHERS = 8.
    IF SY-SUBRC <> 0.
    WRITE:/ 'Error When Sending the File', SY-SUBRC.
    ELSE.
    WRITE:/ 'Mail sent'.
    ENDIF.
    Regards
    Nausal

  • How to send binary data in the message body

    How can we send binary data in the message body that is base64 encoded? below are the requirements
    Mime Header.
    Mime-version: 1.0
    Content-Type: application/octet_stream; name=test
    Content-Transfer-Encoding: Base64
    Submission must be named "test.sub" (lowercase)
    Submission must be base64 mime-encoded
    Submission must be sent in the body of the message (not as an attachment)
    Only one submission per mail message
    No other comments should be put in the body of the mail message (other than the submission)
    I highly appreciate your help. If you can provide few examples, that will be very helpfull.
    Thanks,
    Madan

    Use Message.setContent to set the content, or use Message.setDataHandler with
    a DataHandler constructed with a ByteArrayDataSource. If the content is not
    "naturally" encoded in base64, you can enforce it by setting the Content-Transfer-Encoding
    header to "base64". Any reasonable mail reader won't care what encoding you use, as
    long as the decoded data is correct.

  • User id for the Message creator PROD- PI sheet

    Hi All,
    I have a requirement wherein I would like to check the user who has created/reported the process message (PROD). The "Prod" message is sent using the Schedulede job, so has the batch user id associated with it. Currently the Sender as seen in the message header - COMH table is the CRD destination address. The document created post goods movement -101, has the Doc created by as -" Batch user id" (as mentioned above for the scheduled job).
    Can you all help me as to how can I get the User ID who is actually responsible for the message creating - as the result of this message is the material document. This will give me also the actual creator of the material document (currentl due to batch job the creator displayed is the batch user id) ?
    Thanks in advance.
    Regards,
    Amol

    Hi Amol,
    Standard SAP does not support what you are looking for.  However SAP has proposed a couple of options to accomplish what you are looking for.  Please refer to the link below:
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=628297
    Please let me know if you need additional information.
    Thanks and Regards,
    Prabhu

  • How to Send a Mail From the Oracle Applications.

    Hi,
    I was assigned a task to send a mail from the front end i.e., from oracle applications.
    but i have no idea.
    i am working on oracle apps R12.1.1 and 10g reports.
    First i have to create an rdf file and that rdf file i want to send as an attachment through mail from the apps.
    Any Advice will be of great help and i will follow accordingly.
    Thanks in Advance,
    Regards,
    Bharathi.S

    Hi,
    I was assigned a task to send a mail from the front end i.e., from oracle applications.
    but i have no idea.
    i am working on oracle apps R12.1.1 and 10g reports.
    First i have to create an rdf file and that rdf file i want to send as an attachment through mail from the apps.
    Any Advice will be of great help and i will follow accordingly.
    Thanks in Advance,
    Regards,
    Bharathi.S

  • Any changes in PA30 need to send a mail to the Managers outlook inbox

    Hi,
    Any changes in PA30 (ESS) need to send a mail to the Managers outlook inbox  .
    Kindly let me know the Standard workflow template and  to built the Custom function module in Rule .
    Thanks in advance,
    Richard A

    <i>Any changes in PA30 (ESS) need to send a mail to the Managers outlook inbox</i>
    If its just an email do u need a workflow for it? Configure dynamic actions which will call a subroutine when a change is made to the infotype and send email from that subroutine using SO_NEW_DOCUMENT_SEND_API1.(you can include the necessary logic for determining the approver in the same subroutine).
    Thanks,
    Prasath N

  • Send reminder mails to the outlook

    Hi everyone,
    I have a scenario where i have a modeled deadline branch where if the deadline is missed i am sending recursive mails to the recipients using Rule in an activity .
    In the Rule i am using FM SO_NEW_DOCUMENT_ATT_SEND_API1 for sending mails . I need to send mails 3 times for every 5 mins . for that i have created a requested start deadline with time as 5 min .
    and a workflow element status with initial value as 0 . and  in the same branch i have used a container operation step where i am incrementing my status value by 1.
    and loop until condition is set to &status& = 3.
    i am receiving the reminder mail only once in my outlook and the status is set to 1.
    it is not getting incremented again . and hence no second reminder mails are coming in my outlook.
    Can any one please help .?
    Thanks !!

    I need to send mails 3 times for every 5 mins . for that
    i have created a requested start deadline with time as 5 min .
    I assume you have desigened the workflow template as below.
    1. A dialog step where the workitem will be sent for apprval.
    2. For the above dialog step you have defined both Requested start and Latest end of Modelled Deadline .
    3. In the newly generated branch you have inserted a loop and inside a loop you have defined a step to send mails. End condition for the loop is COUNT = 3.
    IF the case is like above then you modify the workflow design as below.
    1. Instead of inserting a loop in the deadline brach , you define it outside the deadline branch.
    2. Both Dialog workitem and deadline brach and its step must be included inside one loop.
    3. Now for the whole loop you deifine a condition in a such a way that the workitem should not miss the deadline and it should be in the completed status then only you will end the whole loop other wise you keep on looping it .
    I hope if you remodify the workflow as above i hope it works...

  • How i can send a mail to the user SAP Office mailbox through the spool.

    hi all,
    I have created an report and scheduled for background and it generated a spool now how i can send a mail to the user SAP Office mailbox through that spool.
                          please provide me the sample code if possible.
                   thanks.

    Read the spool number with this...
        SELECT RQIDENT
        INTO (T_TSP01-RQIDENT)
        FROM TSP01
        WHERE RQOWNER EQ SY-UNAME
          AND RQCLIENT EQ SY-MANDT.
        APPEND T_TSP01.
        ENDSELECT.
    Use this FM RSPO_IRETURN_RAW_DATA to read the content of the spool into an Internal Table...
    Finally use this FM SO_OBJECT_SEND to send the mail to an SAP Office user...
    Greetings,
    Blag.

  • How to send external mails to the user

    Dears,
    How to send external mails to the user who creates the sales document (Quotation)
    Can you please suggest what modification required in the FM
    Thanks,
    pinky

    You can have a partner function like 'Created by' and use an exit to populate the User ID to this partner function(dont have the system right now but i think this can be done with standard partner detr. procedure also)
    Then, create an Output type for that Partner function with transmission medium as 'External Send'. You can use the standard SAP program to trigger the email. To send the actual email after the output is trigerred, the link connection has to be set up be BASIS but if you want to check, then goto SOST and see if the email got trigerred or not.

  • Need  help sending e-mail a mobile messages

    hi!
    i'm a n00b in Java. Can you please tell how can i send e-mail and mobile messages in java?
    thnx!!

    First of all, before you do any programming, if you want to have your computer send e-mail messages then you must have access to an SMTP server.
    Next, if you do have access to one, then JavaMail is a common way to write programs that send e-mail.
    As for mobile messages ("text messages" to a cellphone?) you usually need a contract with some phone company to do that, so they can bill you for it.
    When you find out about that, they should provide you with documentation on how to proceed. If it involves sending e-mail to a particular address, see part 1 of this reply.

  • Failed to send a request to the message server

    Please help me with the problem as below with Basis 6.5 / ECC5 , Windows Server 2003 / Oracle ( 9.2) environment
    With Sick it says
    Severe problems were detected during initial system check.                
    Please, do not use that system before fixing these problems.              
    when I run SM50
    error: Update is not active
    When I checked SAP MMC, i found   Msg_server stopped
    I am getting following error log with SM21
    04:44:28 DP                           Q0N Failed to send a request to the message server                  
    04:44:28 DP                           Q0N Failed to send a request to the message server                  
    04:44:33 DP                           Q0N Failed to send a request to the message server                  
    04:44:33 DIA 01 020 SAPRFCBWP         EK1 Error found in PBT environment, FM = SPBT_INITIALIZE            
    04:44:33 DIA 01 020 SAPRFCBWP         EK4 > Failed to determine server information                        
    04:44:53 DIA 01 020 SAPRFCBWP         AB0 Run-time error "MESSAGE_TYPE_X" occurred

    Hi,
    Seems to be a problem with your GUI as the dump MESSAGE_TYPE_X is generally related to GUI. Use some higher version of GUI than the existing one.
    Also Updates are not active in your system. Use transaction SM13 to check whether updates are active or not. If not then use transaction SM14 to turn on the updates.
    Regards
    Sourabh Majumdar

Maybe you are looking for