Send a message to multiple computers(Not users) from win7/xp command/or scirpt

Hi Team, is there a way to send a message to multiple windows xp/win7 computers from my win7/xp? 3rd party software,commercial or free, command line,batch or script all welcome. I have a few hundreds of computers, ping-them alive,but I don't know their
location and user name. I was failed  to push SCCM client to them,some could be in work group or admin$ disabled. so I plan to send a message like " please contact IT department for your pc maintenance by this Friday or this PC will be deleted from
the corp domain", when the user contact IT, we can RDP or manual install SCCM onsite with user cooperation. The msg.exe can only send to user,instead of computer names. I tried shutdown /m \\pc-name -f -s -t 1200000 "testMessage" but I got alert
of access denied. though it works if put my local PC name. is there any other way to accomplish this? Many thanks!
Thanks and best regards, -- KF

Hi,
Base on my experience, personally I think solve this case the better method is through your help desk collect the new computer information because consider this: “some
could be in work group or admin$ disabled”, if there have more workgroup PC, it will always hardly to manage them though a purely technical method.
About the domain computer, you can refer the following thread I replayed solution, notice a message to users to connect IT department.
Security Warning Message
http://social.technet.microsoft.com/Forums/windowsserver/en-US/60c1a896-0996-4e88-ace9-8da2284883f7/security-warning-message?forum=winserverhyperv
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • You can't send a message on behalf of this user unless you have permission to do so

    Hi,
    We are on Exchange 2010 SP2 with multiple domain name. All works ok. We need to be able to use other domains while sending email. For example, i have a default reply address set for [email protected] along with other addresses i.e [email protected] etc on
    policy. I am receiving emails and can reply only using [email protected] I get the following error if i try to send email from [email protected]
    [email protected]
    You can't send a message on behalf of this user unless you have permission to do so. Please make sure you're sending on behalf of the correct sender, or request the necessary permission. If the
    problem continues, please contact your helpdesk.
    Users should have the ability to choose an address as they need rather that fixing to a single 'set as reply address'. I am sure it is possible. Can some provide some help/direction?
    Thanks in advance.

    Hi Byron,
    Looked like a workable solution but could not get it to work. I am getting NDR with permission issue. I have created the distribution group with email address. Added the user in it. Given the user Full access and SEND AS permission. 
    Hi, I'm not sure what issue you are running into, but you can definitely give a user Send As permission for a group and then send as the group. I just verified in my test environment.
    To assign the Send As permission, the easy way it in AD User and Computers.
    Enable Advanced Features from the View menu first. This allows you to see the
    Security tab.
    In ADUC, find the group and open the Properties.
    On the Security tab, Add the user.
    With the user selected in the list, Allow the Send as
    permission.
    There may be a bit of lag time before that begins to work as Exchange may have cached some AD permissions, but it definitely works.
    Byron Wright (http://byronwright.blogspot.com)

  • How can I send a message to multiple contacts using "groups".

    How can I send a message to multiple contacts using "groups".
    It was easy on my sony ericssonn....do i need to download an app?

    There is no group send option like you are looking for.
    To send to a group you have to pick each person you want to send to and send as a group that way. Then don't delete that SMS thread and you can reuse it again later.
    As for an app, well SMS works via your carrier and the OS, not something an App can do unless the app send the data to them (a third party) and then they relay it to the carrier. Do you really want to be sending your SMS to some 3rd party first?

  • Want to send public message to all oracle apps users while instance up

    Dear
    For the oracle apps & db maintenance activities, i would like to send public message, example 'Application will not available for 30 minutes from now'. This message must pop-up on user session. How can i achieve this?
    Help me!

    Ateeq,
    I do not think it is possible to send an alert message to all users notifying them that the system will be down. However, you can follow the steps in the following note to redirect the users to a different page or let them a get "The System is now Down for Maintenance" alert message.
    Note: 752540.1 - How To Redirect Some Users To Another Website While The Rest Of The Users Get The Normal "The System is now Down for Maintenance" Alert Message When the System Is Down For Maintenance
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=752540.1
    You may also review:
    Note: 310969.1 - How To Configure & Run Apache in Restricted Mode During Maintenance
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=310969.1
    Regards,
    Hussein

  • Can you send text messages to non-ipod touch users

    Is there an app on the ipod touch you can download to send text messages to non-ipod touch users?

    if you are using imessages on your ipod you can only send messages to apple products suchs as ipad, iphone, and ipod touch .  but if you would like to send messages to a phone that is not an apple product you can download a texting app like text + or pinger.

  • Just bought new iPod touch. When I connect to computer to sync it tells me "iTunes could not connect to this iPod touch. Could not send a message to device." Not sure if it is b/c of an older version of iTunes but connecting via wifi sync unacceptabl

    Just bought new iPod touch. When I connect to computer to sync it tells me "iTunes could not connect to this iPod touch. Could not send a message to device." Not sure if it is b/c of an older version of iTunes but connecting via wifi sync unacceptable

    What version of iTunes is on the computer? You need at least 11.4.

  • I want to know about imessages and how it works !! how to register a number with imessages?? I saved a number in contacts but when I try to send a message it say "! not delivered" in red mark.How can I fix this problem??

    I want to know about imessages and how it works !! how to register a number with imessages?? I saved a number in contacts but when I try to send a message it says "! not delivered" in red mark.How can I fix this problem??

    Perhaps something in this support article will help:
    http://support.apple.com/kb/TS2755
    Regards.

  • HT4623 When I go to install software update to my phone, it sends the message that I am not connected to the internet. what am I doing wrong?

    When I try to install software update to my phone, it sends the message that I am not connected to the internet. What am I doing wrong?

    Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region...change here.

  • HT3529 I am confused about messaging. Shouldn't I be able to send and receive messages with cellular data off?  I can usually send the message, but often do not receive messages until I either have wifi or turn cellular on.

    I am confused about messaging. Shouldn't I be able to send and receive messages with cellular data off and without wifi? I can send the message but often do not receive messages from others, iPhone or other, until  I turn on cellular or wifi.

    Depends on the type of Message.
    SMS messages will send and receive with data off.  and while you can guarantee you send using SMS you cannot guarantee that whoever replies to you does also. They may be replying thorugh iMessage if they are using iPhones.
    However Android should be sending through SMS.
    You can turn off iMessage if you want to, though people with limtied SMS text messaging in their plans may not appreciate it, and stop messaging you.

  • TS2755 phone sending blank messages randomly, i did not compose

    last week i sent a text to a contact and since sending it, every day at least once or twice, my log shows i sent a message to that same contact, but there is no message in it, and the really weird part is that I have not composed a message to this contact since the original text a week ago.
    I spoke to the person and they had not received any messages from my phone, blank or otherwise since last week either.
    Any idea of why or how this could happen? is it possible for the phone to generate and send a message arbitrarily?
    if not what are other causes or possibilities?
    thanks

    How else? HTH should I know. You're the one that said "my log shows i sent a message"...  No idea what "log" you're looking at. You want to cop an attitude... fine. Figure it out yourself.

  • HT201406 I cannot send text messages to anyone but iphone users. How do I fix this??

    I cannot send text messages to anyone but iphone users. How do I fix that??

    The first thing you should do is contact your carrier and make sure that your account is properly provisioned to send text messages.

  • How come my iMessages aren't sending anymore I have a iPod touch 5th gen. It was working and then like 5 minutes later it would not send any messages it always said not delivered even when I press retry and it doesn't send at all I even updated my iOS.

    How come my iMessages aren't sending anymore I have a iPod touch 5th gen. It was working and then like 5 minutes later it would not send any messages it always said not delivered even when I press retry and it doesn't send at all I even updated my iOS to iOS 7.04 to see if it will send my iMessages but it won't. I tried to send a message to anyone but it won't work even when before I would be able to send messages but something weird happened that made my messages not delivered. Is there any way I change fix it?

    iOS: Troubleshooting Messages

  • What is a best app to use for sending text messages/pictures to non iPhone users through my iPad

    What is a best app to use for sending text messages/pictures to non iPhone users through my iPad

    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    How to Receive SMS Messages on an iPad
    http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
    Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
     Cheers, Tom

  • Can i recover my all active directory domain computers and users from IFM and in-cooperate them in new forest ??

    My only Active Directory Server on win server 2008 R2 with one domain controller crashed today. The only backup that i had was IFM media.
    So what i have done till now to recover it is a follow
    I reintalled window server but this time it is winserver 2012. I added AD DS role to it. Promoted it to Domain Controller. (functionality level is 2008 R2)
    On second server i installed win 2008 R2 and trying to add additional domain controller from IFM to recover all of my domain users,computers and GPO's. but i am getting this error
    Could not replicate the directory partition CN=schema, CN= configuration, DC=XXX, DC=com from the remote domain
    the naming context specified for this replication operation is invalid
    i dont know weather my approach is correct or not
    but my simple questions is
    Can i recover my all domain computers and users from IFM and in-cooperate them in new forest ?? if yes how can i do that?? urgent help required.

    yup exactly i created a new domain(in new forest) with same previous name in window server 2012 on SERVER-1. As ifm file that i had was generated from 2008 r2 so on second server i installed window 2008 r2 and tried to add role of additional domain controller
    from ifm file on SERVER-2 using dcpromo /adv . every step went ok but in last step when it starts replicating domain controllers it poup following error
    Could not replicate the directory partition CN=schema, CN= configuration, DC=XYZ, DC=com. .  .
    and roll backs every thing.

  • Can I send a message to multiple users at once?

    My company has an internal Jabber/XMPP server that we use to communicate as a group. Up until recently, I've been using a Jabber client called Psi (http://psi-im.org/) to connect to our Jabber server and do messaging. However, I recently decided to give Messages a try, since it includes support for the Jabber protocol. It is working great, except for one feature that I can't seem to find. With Psi, I was able to right-click on the heading of a buddy group and choose to send a message to all of the members. With Messages in Yosemite, I get an option to "Send instant message to members," but all that does is pull up my messages window with a random contact from the group selected. I also don't want to start a group chat, I just want to send a broadcast message to the group. Maybe this is just a distinction that Messages doesn't make, but with Psi there was a distinct difference between a message (just a single message, in its own window, sent from one person to one or more other people) and a chat (an ongoing conversation with one or more people, all in the same window).
    Right now when I want to send one of these messages, I quit the Messages app, start Psi, send the broadcast message, quit Psi, and start Messages back up again. I'd like to be able to just use Messages.
    Any thoughts?

    Hi,
    The Yahoo add-on bits in Messages are not worth the code they are written on.
    When it was muted to be coming (pre iChat 6)  we thought it would be added the same way and Jabber was in iChat 3 (later amended to allow the Google Name issue to be circumvented by having A Google Entry) including Group Chats, Direct IM, Video Chats and Audio Chat if only to other iChat/Messages users.
    However this is not the case and it only does 1-1 text chats and can only use actual Yahoo IDs
    8:19 pm      Wednesday; April 22, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

Maybe you are looking for