Send a message to multiple receivers from the same service

Hi all,
I registered on SAP community several months ago, I found many good hints and solutions to some of the problems encountered in XI and for which I thank you, but this is the first time I address a question to a common issue, written already about.
I have a scenario with 1 File FTP sender adapter and 2 Receiver adapters:1 FTP adapter and 1 MAIL adapter. The input message is sent to one of these receiver adapters based on the value taken by a specific field from the input message.The receiver adapters are using the same party and service.
The requirement is to solve this without using BPM.
I have read "multiple receiver" issue related blogs and tried to use the standard receiver determination. Thus, I have 1 Sender Agreement, 2 Receiver agreements (one for FTP and one for MAIL), 1 Interface Determinations (with the 2 inbound interfaces and interface mappings corresponding to FTP and MAIL output) and 1 standard Receiver Determination where I added the party and service twice and specified for both the condition. The condition is based on XPath, is correct.
In sxmb_moni, I get the error: "No receiver could be determined". If I remove one of the conditions, then the output is sent on both receiver adapters, instead of only the one that fulfills the condition.
Can you please give me some feedback on how to solve this problem? It is rather urgent.
I have also tried to create 2 Interface Determinations and have 2 Receiver Determinations, each one with the right condition. But I get the same error message.
Is the problem due to the fact that I don't use 2 different services ?
If you know how this can be solved without using BPM, please reply.
Thanks a lot,
Alina hudea

> In sxmb_moni, I get the error: "No receiver could be determined". If I remove one of the conditions, then the output is sent on both receiver adapters, instead of only the one that fulfills the condition.
Hi,
I think the problem in Receive Determination. As you mentioned when you remove one of the condition then it works..
What I concluded is, I think while creating your Receiver Determination for multiple receivers you added the receivers by pressing the plus sign and that means you are using mulitiple receivers with "AND" condition, so in this condition when both the condition will be true then only you will get success.
What you can do is, Just remove one of the receivers and then add it by pressing the "OR" symbol i.e. by pressing this ( [ ] ) symbol and put your conditions as you like.
I hope what I have concluded is correct..
Regards,
Sarvesh

Similar Messages

How do I receive multiple texts from the same sender, each individually?

How do I receive multiple texts from the same sender, each individually?

So I receive automated reminders from my job & I want them to come individually. For example, one text -- time stamped 10:14 pm, then another 11:12 am, coming as separate msgs.

How do you take off reseiving messages on multiple devices using the same apple account

How do you take off reseiving messages on multiple devices using the same apple account?

Go to Settings>Messages>Send and Receive on all but one device and add a unique email address on each device and delete the commone Apple ID email device
If there is also an iPhone with iOS 6 associated with the Apple ID, uncheck the phone number on all but the phone.

From one of my yahoo groups all the messages come thru appearing from the same person. Why is this?

I belong to several yahoo groups and use the filters to send them to their respective folders. Lately with one group, all the messages appear to be from the same person, which I know is not true from looking internally. I've looked on my providers site at my email, at at the groups site, they are that way so it's happening when it comes into Thunderbird. Running version 24.6.0.
Thanks Dwight from WI

They aren't in the address book. Anyway I went into the config editor and set something to false and it took care of the problem. Don't remember what it was. Something with "Show" in it.
Thanks for your time!

Following the latest update, each time I send a message on my iPhone 4 the same message is sent back to my phone. How do I fix this please?

Following the latest update, each time I send a message on my iPhone 4 the same message is sent back to my phone. How do I fix this please?

i have the same problem but i'm using an original iphone 5s cable and i still get this annoying message constantly. the message keeps coming up and dissppears quicly before i can select "trust".

Got a question on mail. We got two e-mail addresses, both different, but messages are picked up from the same server at Vodafone. Received at my iMac I want them to be splitted to two accounts, depending on each e-mail address. How to do this?

Got a question on mail. We got two e-mail addresses, both different, but messages are picked up from the same server at Vodafone. Received at my iMac I want them to be splitted to two accounts, depending on each e-mail address. How to do this?

Hello,
Could you please clarify you have two email addresses [email protected] and [email protected] each with it's own password and you want these delivered to differnt OS X user accounts or seperate folders within Mail?
mrtotes

Installing multiple copies of the SAME service on a BOX

This is a "Best Practice" question for BOE-XI (3.x).
I have dug through the 3.1 DEPLOYMENT training, Admin and Pattern documents, but none of them clearly discuss anything around installing multiple copies of the SAME service (eg. CMS, ReportJob) on the same physical server if it has more that 1 CPU.
The documents detail the "per CPU" limits of a service, but don't detail if we should install multiple services to take advantage of the multiple CPUs available on a specific Physical Server.
For example - the Crystal Report Job Server can support five (5) simultaneous report jobs per CPU by default.
If we have a 2 CPU machine, do we run one (1) CRJS service - but increase the "Maximum Jobs Allowed" setting to Ten (10), or do we install two (2) CRJS services each with a default limit of Five (5)...?
Does this rule apply to all services including the One (1) CPU for One-Hundred (100) simultaneous requests sizing-limit on the CMS..? That doesn't appear to be a setting we can control within the CMC.
Can you run more than one CMS service on a specific Physical Server...?
Thanks in advance for the advice.

I personally have run 20 jobs per Crystal Job server and most were dual processor dual core. I had over 1000 jobs a night, but not all at 1am...although most were within 2 hours of the same time.
I was able to get through them. However, I had 4 Crystal Job servers. Its all about your hardware being taxed.
I broke off my CMS away from the processing tier. So I could have multiple Crystal Job servers.
We had 3 processing tier servers all doing Crystal Jobs and Webi jobs. I had 60 running at one time for Crystal. 20 per job server.
i could have added the Crystal job servers to the same server, but the hardware was getting busy.
I would have at least 2 CMS's as they support 500 concurrent users (Sessions?) each.
This helped us - and we had over 8k reports in our repository. We were getting bound by memory constraints.
Once you get to 64 bit OS and App, (BO XI 4.0 sometime in 2010) it will help with this problem.
The only other way in the 32 bit environment is to add servers, even VM's if you have to as long as they are different hosts, but that adds expensive BOE CPU licenses - the big caveat to that.
That's how we solved the problem...

*** Receiving multiple emails from the same person

This is a new issue that started happening today and I'm wondering if someone can help.
When receiving emails today, they are duplicating as they are coming into my inbox. The wierd thing is, the amount of duplicate emails is inconsistent. All emails are coming in as duplicates, but some messages duplicate up to 7 times for each sender. Other times, the message is in my inbox 4 times. Same message from the same sender.
Is there a way I can tell my MacMail to stop this from happening???
Thanks in advance.

People keep reporting this problem from time to time, and almost always it is some sort of Yahoo account and there is nothing the user can do to fix it. The problem usually fixes itself after some time for no apparent reason, just as it started.
Try using a different mail client, such as Thunderbird, and see whether the problem happens there as well. If so, then you know Mail has no bearing on it and there is nothing you can do other than complaining to your ISP or whoever is responsible for that account.

Can I combine multiple threads from the same contact in iMessage?

iMessage displays multiple threads for the same contact. Its very confusing and has resulted in lost messages. I've tried changing a number of settings but to no avail. Seems to require everyone in my contact list to eliminate all their email addresses in iMessage.
Begs the question why does iMessage even need this information? Worse, why does it suck it into its settings by default. The directory server should only require a valid Apple ID (associated with the users' devices) in order to direct an iMessage between two contacts.

Thanks for the reply, appreciate your input. I did find another way of doing it and that is to highlight the first e-mail, hold down the shift key and click on the last one. That highlights them all and then they can all be deleted. Your ideas also work of course and I thank you for that. Cheers.

Multiple ResultSets from the same connection occuring at the same time

Is it possible to have the following code? The issue is that you are iterating through two result sets created from the same connection at the same time.
try {
Connection conn=createConnection();
Statement s=conn.createStatement();
ResultSet rs=s.executeQuery(someSQL);
while (rs.next()) {
     Statement s2=conn.createStatement();
      ResultSet rs2=s2.executeQuery(someOtherSQL);
      while (rs2.next()) {
           //do something
} catch (SQLException sqle) {
} finally {
freeConnection(conn);

Joel,
The code compiles, but I have not tried running it. It is a question I need to know, designing a program.
The question is whether some error would come up or the first ResultSet would be corrupted because a second were created before the first one was closed.
--Gabe

Connect one JAVA ADS instance to multiple clients from the same ABAP system

Hi,
Does anyone know whether it is possible to connect multplie clients from the same ABAP system to a JAVA instance running ADS?
If so how do you setup the java destinations in Visual Admin and SM59 RFC connections?
Any help is appreciated,
Sander

Dear Sander,
this is always the case if you arrange the ADS connection.
You have to set up the RFC connection 'ADS' in ABAP side and this connection/destination is client independent. So you can use this from all clients of your abap system.
On Java side you have to arrange the already mentioned FP_ICF_DATA_<SID> destination. On the ABAP system and client (you specify in this destination) you have to maintain the user ADS_AGENT and your templates should also exist on this client. If there is no client defined, the default client will be used.
Regards
Istvan

Problems sorting multiple releases from the same year

Hello,
I have just discovered how to arrange my iTunes library in chronological order by artist using 'Album by Year', i.e. All an artists albums are in order of release, Artist > Year > Disc # > Track #
However,
I have now encountered a new (minor) problem where there are several releases from the same year.
For example, I have some artists who have released several singles, EPs and albums all in the same year (those busy people) and so all releases from any one year are filed alphabetically, not technically in chronological order, but close.
It would require an exact release date in the 'Year'/'File Info' fields. Is this possible?
Am I just being too picky?
Thanks people. My head hurts.

Hello,
I have just discovered how to arrange my iTunes library in chronological order by artist using 'Album by Year', i.e. All an artists albums are in order of release, Artist > Year > Disc # > Track #
However,
I have now encountered a new (minor) problem where there are several releases from the same year.
For example, I have some artists who have released several singles, EPs and albums all in the same year (those busy people) and so all releases from any one year are filed alphabetically, not technically in chronological order, but close.
It would require an exact release date in the 'Year'/'File Info' fields. Is this possible?
Am I just being too picky?
Thanks people. My head hurts.

Connecting to multiple clusters from the same client

We have a scenario where our cache client (extend client) should be able to connect to multiple clusters. All the clusters use the exact same configuration (same caches, same services etc) but running in different geographical locations. I know that the <remote-addresses> can be used to add multiple addresses but I'm assuming this is provided solely for fault tolerance. So, does the client actually support connecting to multiple clusters at the same time?
Thanks
Sijo Mathew

Hi Sijo,
Normally to connect a client to multiple clusters you would just define multiple <proxy-scheme> settings in your client configuration file, each one having a different name and pointing to a different cluster. You then map caches to the proxy-scheme for the cluster those caches live on.
What may confuse things in your case is that you say the different clusters are identical and contain the same caches and services so you may have problems mapping caches on the client to different clusters.
What are you trying to achieve by doing this if the clusters are all identical?
JK

Multiple edits from the same clip.

Hi guys,
I have a project which requires a lot of different edits from the same clip.
Is there any way to do this without having to duplicate the same clip each time and then making my new edit?
For instance -
Clip 1 is 20 minutes long.
My first edit is from 1:10 to 1:35.
I then duplicate Clip 1 and make another edit from 2:40 to 3:55.
I'm using Premier CS5.
Thanks,
Dave.

Sub clips are not a general edit way of doing things efficiently.
They are more of a way of creating a bin full of "selects" ( selected clips in a Selects Folder for easy and quick access and review). That is a time consuming process but works well in some situations.
Standard general edit practice is to edit from Source Monitor.
drop Clip into Source Monitor
Mark In and Out point and drop that to the Time line. (many ways to do that Insert/ overlay/ shortcuts etc..)
Next...Move thru and create new In and Out and do the same
continue thru the Source Clip till complete...
Then on the Timeline ( sequence) Tim and work the clips.
Now ...some "learners" edit the source clip in the timeline using Razor Tool...hacking and chopping and deleting and dragging bits of stuff all over the show. Thats in efficient and clunky .

Multiple Contacts From The Same Company

Is there a way to "clone" a contact entry to avoid re-entering all of the information for a new contact from the same company?

Let's figure this out mrucci! I want to ensure I fully understand so I may assist accordingly. Are you creating several contacts with different numbers from the same company and want to know if there is a quick option to auto generate the company contact details? Please confirm so I may further assist. Thank you.
TominqueBo_VZW
Please follow us on Twitter @VZWSupport

Send a message to multiple receivers from the same service

Similar Messages

Maybe you are looking for