Send a signal, acquire the response and analyse

Hello,
I am quite beginner in Labview.
I want to send a signal to a loudpeaker and acquire the signal of a microphone and a photomultipier.
I have already done the VI to acquire and record, and the VI to send the signal to the loudpseaker.
Now , I would like to merge the both Vi to send and acquire simutaneously.
I use labview v.8

These is my two VIs.
Moreover when I open and run the sinewavegenerator end then want to run the VI " pm+micro record" the error 50130 occures.
I suppose that I have to change something in my Daqmx task but I dont kmow what:
Thank you for any help
Eva Comble
Attachments:
micro+pm record.vi ‏106 KB
sinewavegenerator.vi ‏161 KB

Similar Messages

My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen

My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen.
I have tried with a wired USB keyboard and mouse using a single screen. Powered up with option pressed. No change.
Reset SMC no change

Run the Apple hardware test to see what it tells you. Run the extended test when prompted, which can take awhile.

Apple TV is not sending a signal to the tv, how do i fix this?

There is no signal coming from the Apple TV, according to the two television sets that I have connected it to. I have tried using different HDMI cords as well. I have also tried to plug it in to different HDMI ports on the the television sets. I have also reset the Apple TV box. Was there a recent update to the software? I have had the Apple TV for three months now and it was working until today, 9/14/13. How can I get the Apple TV to send a signal to the tv?

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

I have a power mac G5, when starting up doesnt send no signal to the screen at all

My name is Emilio1991 and I have problems starting it up, I hit the power button and it start great but it have a problem it doesnt send not signal to the screen at all, I thought it was the video card and buyed a new one and it still with thet same problem I try to find solutios and nothing about that can some one help me with that/???

Couple of more ideas...
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
See which one your G5 has...
http://eshop.macsales.com/item/Newer%20Technology/CR2032/
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

Sending a file to the Response failure

Hello everybody,
I have to send a file to the response for the browser to show a save/open file dialog box to the user, so he/she can download it and save in in his/her local file system. As expected the file is stored in a specific directory in the file system of the server.
What I did was to call this method within a commandLink component:
public String downloadDB(){
      FacesContext context = FacesContext.getCurrentInstance();
      HttpServletRequest request = ( HttpServletRequest )
                                 context.getExternalContext().getRequest( );
      HttpServletResponse response =
         ( HttpServletResponse ) context.getExternalContext().getResponse();
      String filePath = null;
      int read = 0;
      byte[] bytes = new byte[1024];
      filePath = getMyDBPath();
      response.setContentType("application/pdf");
      FileInputStream fis = null;
      OutputStream os = null;
      try {
         fis = new FileInputStream(new File(filePath));
         os = response.getOutputStream();
         while((read = fis.read(bytes)) != -1){
            os.write(bytes,0,read);
         os.flush();
         os.close();
      catch ( FileNotFoundException e1 ) {
         logger.error(e1);
         logger.info(e1.getMessage());
         request.setAttribute("errors", "File Not Found.");
      catch ( IOException ioe ) {
         logger.error(ioe);
         logger.info(ioe.getMessage());
         request.setAttribute("errors", "Error reading file.");
      return "";
   }After the user clicks on the commandLink, the page I'm working on, gets refreshed and at the top of it appears the text of the file I tried to download. This is not the expected behaviour, what should I do?
thanks a lot,
Johnny

I have found the solution, some googling and in another differente JSF forum.
what I missed was to include in the header this:
response.setHeader("Content-disposition", "attachment; filename="+filename);With that line it works perfect.
thanks.

I m using apple mac pc, when we start windows 7 , apple mouse doesn't work properly it take to much time to gain signals from the pc and many times it not work but when we use mac it moves fastly and works properly. please suggest me. thanks ravi

i m using apple mac pc, when we start windows 7 , apple mouse doesn't work properly it take to much time to gain signals from the pc and many times it not work but when we use mac it moves fastly and works properly. please suggest me.
thanks
ravi
<Email removed by Host>

sounds more like Bluetooth rather than moue, but w/o knowing w/o posting mac model type/year we... will... not... know... what you have
All computers are personal computers, a PC though is also "non-Apple" in common usage.
Mac also is platform and OS.
Very confused reading what you are trying to tell us.

For five days bought iphone 4s and out of the blue loses the signal on the network and makes it very regularly, I have upgraded to version 5.0.1 if you can help me

for five days bought ipione 4s and out of the blue loses the signal on the network and makes it very regularly, I have upgraded to version 5.0.1 if you can help me.
I had the previous model and forced to buy 4s to catch a better signal, the network I have is cosmote and where it is full house is important, I want your help

Hi ChrisBell,
my Pixi shows me the missed calls in a list of its own? I don't have many, so maybe I'm missing something. But I agree with your half-ranting to some degree. As a long-time Palm-user (my last phone was a Treo 680, terrible form factor, good UI), I am really disappointed with the standard software on this phone. Memos and Tasks, which AFAIK were there and useful even on the first Newton's, have regressed beyond the point of usefulness now (solution: Toodledo and Done!, at least for now).
But ChrisBell: if you feel up for it, you could start tinkering. Many people love these phones so much they have started developing patches to solve the obvious problems skimmed over by developers. Try looking up "webosquickinstall" and "preware", and you will find over 300 patches and a lot of free software to help you out. I am not a computer wizard myself, but I am not scared of them either, and I have been able to make good use of all these extras made available by the community.
just a thought, might help you out on a few of your half-rants

What can I expect of my 4s with wifi connectivity. My 4s receive a signal from the same router I have always used. My 3G would pick up a signal throughout the house, and my 4s won't allow me out of the room. Is my new phone defective or just inferior.

What can I expect of my 4s with wifi connectivity. My 4s receive a signal from the same router I have always used. My 3G would pick up a signal throughout the house, and my 4s won't allow me out of the room. Is my new phone defective or just inferior.

4S at my house have stronger antenna than 3G iPhone. Reset Network Settings, tap Settings App>General>Reset, near bottom>Reset Network Settings. If still problem take to Apple for Warranty Coverage.

I want to use the Function Generator VI to send command signals through the NI 7344 motion controller. This will be a closed loop servo valve system. I want to be able to change from say a square wave to a sine wave on the fly. Idea's?

I am going to run tests that require an actuator to move using various types of arbitrary waveforms such as sine or square. The NI 7344 is hooked to the UMI that is going through a driver for a servo valve. The loop is analog and it is closed. I have played with some of the examples but can't get it to work. I have used the function generator VI to generate a signal but I think I am using the wrong input VI to the motion control board. When I use what I have it moves the servo and then stops. It doesn't continually generate the signal.
I would love to use the controls on the function generator vi to control frequency and amplitude ect. Any help or pointer would be helpful. Thank you in advance.

Hello,
I'm not clear on exactly how you want to use the generated data but I'm assuming they will be used as your target points.
There's a built-in example for motion called 'One-Axis Contour Move.vi'. This example demonstrates how to provide your target points as 1-D array. All you need to do is to replace the input array with the output of the function generator. In order to have it run continuously, use a while loop. You can further program your application so that it'll change the waveform on the fly by monitoring the user interface but this might be little little tricky as you will need to reset the move and load the new generated points while keeping track of your current position.
I hope this helps. Let me know if you have further questions regarding this
application.
Best regards,
Yusuf C.
Applications Engineering
National Instruments

Send two signals at the same time to serial

Hi
I have a problem in that I want to control some relay boards by serial. The boards have an address byte (to determine which of the three relay boards) and a relay combination (four relays on each board). The .vi I will need to make will be sending data to the serial as a result of feedback from sensors (they are currently simply controlled by timers to simulate) so there is a good chance that there will be two relay addresses sent at the same time and consequently much confusion. The timed simulation demonstrates this possibility by switching all relays on at the start.
Is there a way of avoiding this? Any help would be much appreciated.
Many thanks
Alastair

Alastair,
When you say send to multiple boards "at the same time" exactly what to you mean? On a serial port only one byte at a time can be sent. You do not specify how many bytes are sent to each board to handle the addressing, the data, and any EOT (End of Transmission) characters.
I can think of two possibilities.
1. Relays are slow. If the transmission rate is fast enough, you could send messages to all relays sequentially over the serial port but still have the appearance of simultaneous activation of the relays. If the relays switch in 10 ms and each command contains 6 bytes, sending the data at 115 kilobaud would take about 1.5 ms for three boards. This would likely be close enough to simultaneous for relays.
2. Add a command similar to the GPIB GET (Group Execute Trigger). All devices on the bus respond to this command by executing a previously stored command. No addressing is used for this command. This does require that the relay boards be modified to respond to their address and to the common or group address and to store a command for later execution.
Lynn

TS2755 After upgrading to IOS 7.0.2 sending messages doesn't work right. It gets stuck on "sending", until I click the message and select the option "send as text". What's wrong?

When using Message after upgrading to IOS 7, it get stuck on "sending" and stays there forever until I click the message and hit "send as text" and then the message changes from blue to green and goes through.

I turned the phone off and then back on and now it works.

In the new Pages, how does one send an image to the background (and make it selectable)?

How does one send an image to the background in the new Pages and how does one make it selectable?

Also why don't TEXT to Speech short cuts established in system preferences work in the new Pages?
I am confused (and not completely happy)

Send email notification when the baseline and actual values are different in project

Hi
I am working with MS Project 2013 and Project Server 2013.
I need to the send email notification to the program manager (or to a user) whenever the project manager changes the task finish date for a task. Comparison should happen with the baseline finish and the difference needs to be updated to the Program Manager
over mail.
How to configure/customize email notification for changes in MPP.
Please suggest.
Regards,
Sudhir

If you are not having developer skills it will be complicated for you.
You need to create event handler by code, as in the below link:
http://msdn.microsoft.com/en-us/library/office/gg615466%28v=office.14%29.aspx
Then compare your values and finally send email by code.
Twitter : @MShoubaki | http://jo.linkedin.com/in/mshoubaki

Submit program to send a smartform to the spool and obtain a PDF

Hi all,
I wanna know if there is a way to submit (execute) a program that print a smartform for print this smartform to the spool and then obtain a PDF file from the spool order.
I wanna do this because the program that allows to print the smartform is already implemented and its logic is complicated, and I need to get the smartform as a PDF to show it into a WDP Java application.
If it's posible to do this, could you explain me how can I do it?
Regards,
Gregory.

Hi,
To get the PDF format output of smartform you can try with the following Function Module.Before that you have to declare the function module for calling the smartform.
DATA:
W_bin_filesize TYPE i, " Binary File Size
Internal table to hold the OTF data*
DATA:
t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
Internal table to hold OTF data record from the SMARTFORM
t_otf_from_fm TYPE ssfcrescl,
Internal table to hold the data from the FM CONVERT_OTF
T_pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE.
Function Module CONVERT_OTF is used to convert the OTF format to PDF
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
ARCHIVE_INDEX = ' '
COPYNUMBER = 0
ASCII_BIDI_VIS2LOG = ' '
PDF_DELETE_OTFTAB = ' '
IMPORTING
BIN_FILESIZE = W_bin_filesize
BIN_FILE =
TABLES
otf = T_OTF
lines = T_pdf_tab
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Suvajit

I dropped my iPhone down a stairwell. It was in a case but the screen shattered. I replaced the screen with disaled iphone. Now it loses signal all the time, and goes into "searching" mode for cell signal.

iTunes says it needs to be restored to default to connect. When I restore it nothing changes. I get the same behavior. Below is my deivce log from the iPhone Config Utility. Hopefully someone can tell me if the phone is a wash.
==== Attached at 7/23/2012 11:56:40 PM ====
Jul 23 23:21:03 unknown configd[44] <Notice>: network configuration changed.
Jul 23 23:21:03 unknown configd[44] <Notice>: Captive: en0: Not probing 'can haz netz' (good signature)
Jul 23 23:21:03 unknown configd[44] <Notice>: network configuration changed.
Jul 23 23:21:04 unknown wifid[13] <Error>: WiFi:[364792864.449884]: Client itunesstored is background application
Jul 23 23:21:04 unknown ptpd[185] <Notice>: PTP interface has been activated at high speed.
Jul 23 23:21:06 unknown kernel[0] <Debug>: launchd[192] Builtin profile: syncdefaultsd (sandbox)
Jul 23 23:21:09 unknown configd[44] <Notice>: Captive: en0: Not probing 'can haz netz' (good signature)
Jul 23 23:21:09 unknown configd[44] <Notice>: network configuration changed.
Jul 23 23:21:09 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::endpointIOTimerExpired : IO stuck for endpoint 81, killing it
Jul 23 23:21:09 unknown kernel[0] <Debug>: GINTSTS=04008028 GINTMSK=a00c3800 GNPTXSTS=00080010 DAINT=00000000
Jul 23 23:21:09 unknown kernel[0] <Debug>: DAINTMSK=0015002b DCFG=00000010 DCTL=00000000 DSTS=0036ab00
Jul 23 23:21:09 unknown kernel[0] <Debug>: GRXFSIZ=0000021b GNPTXFSIZ=0010021b DPTXSIZ(1)=0040022b
Jul 23 23:21:09 unknown kernel[0] <Debug>: GAHBCFG=0000002b, GUSBCFG=00002c08, GRSTCTL=80000000
Jul 23 23:21:09 unknown kernel[0] <Debug>: DEPCTL   DEPINT   DEPTSIZ DEPDMA
Jul 23 23:21:09 unknown kernel[0] <Debug>: EP80 00008000 00000080 00000000 419c5004
Jul 23 23:21:09 unknown kernel[0] <Debug>: EP00 80028000 00000000 20080040 419c4000
Jul 23 23:21:09 unknown kernel[0] <Debug>: EP81 80888200 00000000 20080000 51dd700c
Jul 23 23:21:09 unknown kernel[0] <Debug>: EP83 004e8040 00002090 00000000 7617e65e
Jul 23 23:21:09 unknown kernel[0] <Debug>: EP85 00c98200 00002010 20000000 41f97068
Jul 23 23:21:09 unknown kernel[0] <Debug>: EP02 000a8200 00002010 00380ff4 4a03100c
Jul 23 23:21:09 unknown kernel[0] <Debug>: EP04 80088200 00000000 02008000 42011000
Jul 23 23:21:10 unknown configd[44] <Notice>: network configuration changed.
Jul 23 23:21:10 unknown UserEventAgent[12] <Warning>: DEBUG: Changing WiFi state: 1
Jul 23 23:21:10 unknown CommCenter[55] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 1
Jul 23 23:21:10 unknown SpringBoard[50] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Jul 23 23:21:10 unknown SpringBoard[50] <Notice>: MultitouchHID: detection mode: 0->255
Jul 23 23:21:10 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 1
Jul 23 23:21:11 unknown kernel[0] <Debug>: ALS: [AppleCT700] setPropertiesGated: requested ReportInterval=0 turn OFF sensor
Jul 23 23:21:13 unknown timed[194] <Notice>: (Note ) CoreTime: Received time 07/24/2012 03:21:13-0-.-0-0 -f-r-o-m -"-N-I-T-Z-"
Jul 23 23:21:13 unknown timed[194] <Notice>: (Note ) CoreTime: Not setting system time to 07/24/2012 03:21:13 from NTP because time is unchanged
Jul 23 23:21:13 unknown timed[194] <Notice>: (Note ) CoreTime: Want active time in 31.52hrs. Need active time in 114.85hrs.
Jul 23 23:21:13 unknown timed[194] <Notice>: (Note ) CoreTime: Received network time zone "NITZ" with 364792873.00 -240 DST 1 in 310
Jul 23 23:21:13 unknown timed[194] <Notice>: (Note ) CoreTime: Searching in DST time zone map for offset -240 and MCC 310
Jul 23 23:21:13 unknown timed[194] <Notice>: (Note ) CoreTime: Received timezone "America/New_York" from "NITZ"
Jul 23 23:21:13 unknown timed[194] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from NITZ
Jul 23 23:21:15 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::endpointIOTimerExpired : IO stuck for endpoint 81, killing it
Jul 23 23:21:15 unknown kernel[0] <Debug>: GINTSTS=04008028 GINTMSK=a00c3800 GNPTXSTS=00080010 DAINT=00000000
Jul 23 23:21:15 unknown kernel[0] <Debug>: DAINTMSK=0015002b DCFG=00000010 DCTL=00000000 DSTS=00131c00
Jul 23 23:21:15 unknown kernel[0] <Debug>: GRXFSIZ=0000021b GNPTXFSIZ=0010021b DPTXSIZ(1)=0040022b
Jul 23 23:21:15 unknown kernel[0] <Debug>: GAHBCFG=0000002b, GUSBCFG=00002c08, GRSTCTL=80000000
Jul 23 23:21:15 unknown kernel[0] <Debug>: DEPCTL   DEPINT   DEPTSIZ DEPDMA
Jul 23 23:21:15 unknown kernel[0] <Debug>: EP80 00008000 00000080 00000000 419c5004
Jul 23 23:21:15 unknown kernel[0] <Debug>: EP00 80028000 00000000 20080040 419c4000
Jul 23 23:21:15 unknown kernel[0] <Debug>: EP81 80888200 00000000 20080000 51dd700c
Jul 23 23:21:15 unknown kernel[0] <Debug>: EP83 004e8040 00002090 00000000 7617e65e
Jul 23 23:21:15 unknown kernel[0] <Debug>: EP85 00c98200 00002010 20000000 41f97068
Jul 23 23:21:15 unknown kernel[0] <Debug>: EP02 000a8200 00002010 00380ff4 4a03100c
Jul 23 23:21:15 unknown kernel[0] <Debug>: EP04 80088200 00000000 02008000 42011000
Jul 23 23:21:16 unknown kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::setLinkQualityMetricGated: Setting link quality metric to 100
Jul 23 23:21:16 unknown timed[194] <Notice>: (Note ) CoreTime: Want active time in 31.52hrs. Need active time in 114.85hrs.
Jul 23 23:21:21 unknown kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::dormancySetIntervalGated: Setting dormancy interval to 2500 ms with mask 0x1700
Jul 23 23:21:45 unknown profiled[183] <Notice>: (Note ) profiled: Idled.
Jul 23 23:21:45 unknown profiled[183] <Notice>: (Note ) profiled: Service stopping.
Jul 23 23:25:10 unknown CommCenter[55] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 1
Jul 23 23:26:21 unknown lockdownd[26] <Error>: libMobileGestalt computeUniqueDeviceID: total time for bb to return imei: 0
Jul 23 23:26:21 unknown lockdownd[26] <Notice>: 2ff90000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
Jul 23 23:26:21 unknown lockdownd[26] <Error>: libMobileGestalt copyMobileEquipmentIdentifier: No MEID in CT mobile equipment info dictionary - <CFBasicHash 0x1273b0 [0x3f71b650]>{type = mutable dict, count = 5,
entries =>
1 : <CFString 0x127460 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoCurrentSubscriberId"} = <CFString 0x1274a0 [0x3f71b650]>{contents = "310410418830324"}
2 : <CFString 0x127ec0 [0x3f71b650]>{contents= "kCTMobileEquipmentInfoCurrentMobileId"} = <CFString 0x127ef0 [0x3f71b650]>{contents = "012417009917339"}
4 : <CFString 0x1274e0 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoICCID"} = <CFString 0x127510 [0x3f71b650]>{contents = "89014104254188303245"}
11 : <CFString 0x127530 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoIMEI"} = <CFString 0x127ef0 [0x3f71b650]>{contents = "012417009917339"}
12 : <CFString 0x1275a0 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoIMSI"} = <CFString 0x1274a0 [0x3f71b650]>{contents = "310410418830324"}
Jul 23 23:26:21 unknown lockdownd[26] <Notice>: 2ff90000 copy_meid: MobileGestalt failed to provide an MEID but returned no error (?)
Jul 23 23:26:22 unknown atc[199] <Error>: libMobileGestalt computeUniqueDeviceID: total time for bb to return imei: 0
Jul 23 23:26:23 unknown wifid[13] <Error>: WiFi:[364793183.480799]: Client itunesstored is background application
Jul 23 23:26:24 unknown lockdownd[26] <Error>: libMobileGestalt computeUniqueDeviceID: total time for bb to return imei: 0
Jul 23 23:26:45 unknown lockdownd[26] <Notice>: 2ff90000 _receive_message: walk away - non-SSL 1
Jul 23 23:35:09 unknown configd[44] <Notice>: network configuration changed.
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! prot::handleReadData: Dumping 27.010 buffer (8 bytes):
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! prot::handleReadData: frameStart = 0, address = 31
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! buff(3260)::__log: length 8
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! buff(3260)::__log: chunk 0 (8/0xd07b5804):
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! buff(3260)::__log: 0000 7D 01 EF A1 0D 0A 2B 58                            }.....+X
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! mux-ad(eng)::fatalError: fatal error: kASMFatalErrorInvalidChannel (8): channel was 31
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::changeMuxStateGated: state change: Engaged -> Error
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! mux-ad(err)::bsdIoctl: Fatal error code=kASMFatalErrorInvalidChannel(8)
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! mux-ad(err)::validateAndGetMuxBsdInterface: Cannot perform Receive on Bypass when state is Error
Jul 23 23:35:09 unknown CommCenter[55] <Notice>: CSI state dump requested: AppleSerialMultiplexer Fatal Error: Code kASMFatalErrorInvalidChannel (8): channel was 31: snapshot: RESET_DET: Dunno, SPCLKCON 0x1, SPCON 0xd405a, SPSTA 0x160410, SPCNT 0x128, SPTDCNT 0x127 - Protocol: MRDY Low, SRDY High(Select Exception)
Jul 23 23:35:10 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! mux-ad(err)::validateAndGetMuxBsdInterface: Cannot perform Receive on Bypass when state is Error
Jul 23 23:35:10 unknown CommCenter[55] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 0
Jul 23 23:35:10 unknown lockdownd[26] <Notice>: 3ec2cd98 lookup_baseband_info_old: The SIM status has changed
Jul 23 23:35:10 unknown lockdownd[26] <Notice>: 3ec2cd98 load_activation_records: Could not extract ICCID from record
Jul 23 23:35:10 unknown lockdownd[26] <Notice>: 3ec2cd98 load_activation_records: This is a wildcard record
Jul 23 23:35:10 unknown lockdownd[26] <Notice>: 3ec2cd98 copy_activation_record: No unlock record. Looking for a care flag.
Jul 23 23:35:10 unknown lockdownd[26] <Notice>: 3ec2cd98 copy_activation_record: No care flag. Looking for a record that matches the SIM.
Jul 23 23:35:10 unknown lockdownd[26] <Notice>: 3ec2cd98 copy_activation_record: Looking up the record for ICCID 89014104254188303245
Jul 23 23:35:10 unknown lockdownd[26] <Notice>: 3ec2cd98 copy_activation_record: No record for the SIM. Looking for wildcard.
Jul 23 23:35:10 unknown SpringBoard[50] <Error>: mms: ***** isMmsConfigured = 1
Jul 23 23:35:11 unknown timed[205] <Notice>: (Note ) CoreTime: Received source unavailable from "NITZ"
Jul 23 23:35:11 unknown timed[205] <Notice>: (Note ) CoreTime: Not setting system time to 07/24/2012 03:35:11 from NTP because time is unchanged
Jul 23 23:35:11 unknown timed[205] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from NITZ
Jul 23 23:35:11 unknown timed[205] <Notice>: (Note ) CoreTime: Want active time in 31.28hrs. Need active time in 114.62hrs.
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 3ec2cd98 determine_activation_state_old: This device is a phone. It supports factory activation.
Jul 23 23:35:11 unknown lockdownd[26] <Error>: libMobileGestalt computeUniqueDeviceID: total time for bb to return imei: 0
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 3ec2cd98 determine_activation_state_old: The original activation state is WildcardActivated
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 3ec2cd98 determine_activation_state_old: SIM status: kCTSIMSupportSIMStatusNotReady
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 3ec2cd98 determine_activation_state_old: No ICCID in the activation record
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 3ec2cd98 determine_activation_state_old: The record contains a wildcard ticket
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 3ec2cd98 deliver_baseband_ticket: SIM is not in operator locked state. Ignoring activation ticket
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 3ec2cd98 determine_activation_state_old: The activation state has not changed.
Jul 23 23:35:11 unknown lockdownd[26] <Error>: libMobileGestalt computeUniqueDeviceID: total time for bb to return imei: 0
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 00299000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
Jul 23 23:35:11 unknown lockdownd[26] <Error>: libMobileGestalt copyMobileEquipmentIdentifier: No MEID in CT mobile equipment info dictionary - <CFBasicHash 0x11b710 [0x3f71b650]>{type = mutable dict, count = 5,
entries =>
1 : <CFString 0x11b7c0 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoCurrentSubscriberId"} = <CFString 0x145d20 [0x3f71b650]>{contents = "310410418830324"}
2 : <CFString 0x11b6e0 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoCurrentMobileId"} = <CFString 0x1393a0 [0x3f71b650]>{contents = "012417009917339"}
4 : <CFString 0x11b470 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoICCID"} = <CFString 0x1329f0 [0x3f71b650]>{contents = "89014104254188303245"}
11 : <CFString 0x11b4a0 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoIMEI"} = <CFString 0x1393a0 [0x3f71b650]>{contents = "012417009917339"}
12 : <CFString 0x11b4d0 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoIMSI"} = <CFString 0x145d20 [0x3f71b650]>{contents = "310410418830324"}
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 00299000 copy_meid: MobileGestalt failed to provide an MEID but returned no error (?)
Jul 23 23:35:11 unknown timed[205] <Notice>: (Note ) CoreTime: Received timezone "America/New_York" from "Location"
Jul 23 23:35:11 unknown timed[205] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from Location
Jul 23 23:35:11 unknown kernel[0] <Debug>: AppleBaseband::resetDetectInterrupt with 1
Jul 23 23:35:13 unknown CommCenter[55] <Notice>: Baseband reset:
Jul 23 23:35:13 unknown CommCenter[55] <Error>: _ReInitThrottleTimer(): Clearing throttle timer on context ID [0xffffffff] at 364793713.503971
Jul 23 23:35:13 unknown CommCenter[55] <Notice>: START LOCATION UPDATE
Jul 23 23:35:13 unknown CommCenter[55] <Notice>: STOP LOCATION UPDATE
Jul 23 23:35:14 unknown timed[205] <Notice>: (Note ) CoreTime: Want active time in 31.28hrs. Need active time in 114.62hrs.
Jul 23 23:45:20 unknown SpringBoard[50] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Jul 23 23:45:20 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 0
Jul 23 23:45:20 unknown SpringBoard[50] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Jul 23 23:45:21 unknown CommCenter[55] <Notice>: CSI state dump requested: No response from modem
Jul 23 23:45:21 unknown SpringBoard[50] <Notice>: MultitouchHID: device bootloaded
Jul 23 23:45:21 unknown SpringBoard[50] <Notice>: MultitouchHID: detection mode: 0->0
Jul 23 23:45:21 unknown kernel[0] <Debug>: set_crc_notification_state 0
Jul 23 23:45:43 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(1)
Jul 23 23:45:43 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Jul 23 23:46:43 unknown SpringBoard[50] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Jul 23 23:46:43 unknown SpringBoard[50] <Notice>: MultitouchHID: detection mode: 0->255
Jul 23 23:46:43 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 1
Jul 23 23:46:43 unknown profiled[212] <Notice>: (Note ) profiled: Service starting...
Jul 23 23:46:43 unknown profiled[212] <Notice>: (Note ) profiled: Locking device
Jul 23 23:46:44 unknown kernel[0] <Debug>: ALS: [AppleCT700] setPropertiesGated: requested ReportInterval=0 turn OFF sensor
Jul 23 23:46:44 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Jul 23 23:46:54 unknown kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(nr)::dormancySetIntervalGated: Setting dormancy interval to 2500 ms with mask 0x1700
Jul 23 23:46:54 unknown kernel[0] <Debug>: AppleKeyStore:timer fired
Jul 23 23:46:54 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(0)
Jul 23 23:46:54 unknown kernel[0] <Debug>: AppleKeyStore:Removing timer
Jul 23 23:46:54 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Jul 23 23:47:24 unknown timed[213] <Notice>: (Note ) CoreTime: Want active time in 31.08hrs. Need active time in 114.41hrs.
Jul 23 23:47:34 unknown timed[213] <Notice>: (Note ) CoreTime: Not setting system time to 07/24/2012 03:47:34 from NTP because time is unchanged
Jul 23 23:47:34 unknown timed[213] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from Location
Jul 23 23:47:43 unknown profiled[212] <Notice>: (Note ) profiled: Idled.
Jul 23 23:47:43 unknown profiled[212] <Notice>: (Note ) profiled: Service stopping.
Jul 23 23:53:50unknown notification_proxy[198] <Error>: Could not receive size of message: 0 Invalid argument
Jul 23 23:53:50 unknown notification_proxy[198] <Error>: Could not receive message
Jul 23 23:54:38 unknown iapd[38] <Warning>: ERROR - /SourceCache/iapd/iapd-813.55.20/IAPPortManager.mm:-[IAPPortManager availableCurrentFromAccInMa] - 271 IOAccessoryManagerGetUSBCurrentLimitBase failed 0xe00002d9
Jul 23 23:54:38 unknown notification_proxy[200] <Error>: Could not receive size of message: 0 Invalid argument
Jul 23 23:54:38 unknown notification_proxy[200] <Error>: Could not receive message
Jul 23 23:54:38 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_screen_on even though we are not in it, doing nothing
Jul 23 23:54:38 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_charging even though we are not in it, doing nothing
Jul 23 23:54:38 unknown SpringBoard[50] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Jul 23 23:54:38 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 0
Jul 23 23:54:38 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_screen_on even though we are not in it, doing nothing
Jul 23 23:54:38 unknown ptpd[185] <Notice>: PTP interface has been deactivated.
Jul 23 23:54:38 unknown SpringBoard[50] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Jul 23 23:54:38 unknown UserEventAgent[12] <Warning>: DEBUG: Changing powered state: 0
Jul 23 23:54:38 unknown SpringBoard[50] <Notice>: MultitouchHID: device bootloaded
Jul 23 23:54:38 unknown SpringBoard[50] <Notice>: MultitouchHID: detection mode: 0->0
Jul 23 23:54:39 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_asleep even though we are not in it, doing nothing
Jul 23 23:54:39 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_screen_off even though we are not in it, doing nothing
Jul 23 23:54:39 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_screen_off even though we are not in it, doing nothing
Jul 23 23:54:39 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 0
Jul 23 23:54:39 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType Detached
Jul 23 23:54:39 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Jul 23 23:54:39 unknown kernel[0] <Debug>: virtual IOReturn AppleUSBDeviceMux::message(UInt32, IOService*, void*) - kMessageInterfaceWasDeActivated
Jul 23 23:54:39 unknown kernel[0] <Debug>: AppleUSBDeviceMux::reportStats: USB mux statistics:
Jul 23 23:54:39 unknown kernel[0] <Debug>: USB mux: 276 reads / 0 errors, 464 writes / 0 errors
Jul 23 23:54:39 unknown kernel[0] <Debug>: USB mux: 0 short packets, 0 dups
Jul 23 23:54:39 unknown kernel[0] <Debug>: set_crc_notification_state 0
Jul 23 23:54:39 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 1
Jul 23 23:54:39 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType USBHost
Jul 23 23:54:39 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_screen_off even though we are not in it, doing nothing
Jul 23 23:54:39 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_charging even though we are not in it, doing nothing
Jul 23 23:54:39 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_screen_off even though we are not in it, doing nothing
Jul 23 23:54:40 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 0
Jul 23 23:54:40 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType Detached
Jul 23 23:54:40 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Jul 23 23:54:44 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(1)
Jul 23 23:54:44 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Jul 23 23:54:58 unknown iapd[38] <Warning>: Model Number: 4
Jul 23 23:54:58 unknown iapd[38] <Warning>: MFG:
Jul 23 23:54:58 unknown iapd[38] <Warning>: Model:
Jul 23 23:54:58 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_asleep even though we are not in it, doing nothing
Jul 23 23:54:58 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_screen_off even though we are not in it, doing nothing
Jul 23 23:54:58 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_screen_off even though we are not in it, doing nothing
Jul 23 23:54:58 unknown iapd[38] <Warning>: Model Number: 4
Jul 23 23:54:58 unknown iapd[38] <Warning>: MFG:
Jul 23 23:54:58 unknown iapd[38] <Warning>: Model:
Jul 23 23:54:59 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 1
Jul 23 23:54:59 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType USBHost
Jul 23 23:54:59 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBReset
Jul 23 23:54:59 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBReset
Jul 23 23:54:59 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 0
Jul 23 23:54:59 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType Detached
Jul 23 23:54:59 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Jul 23 23:54:59 unknown iapd[38] <Warning>: ERROR - /SourceCache/iapd/iapd-813.55.20/IAPPortManager.mm:-[IAPPortManager availableCurrentFromAccInMa] - 271 IOAccessoryManagerGetUSBCurrentLimitBase failed 0xe00002d9
Jul 23 23:54:59 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_screen_off even though we are not in it, doing nothing
Jul 23 23:54:59 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_charging even though we are not in it, doing nothing
Jul 23 23:54:59 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_screen_off even though we are not in it, doing nothing
Jul 23 23:55:05 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_asleep even though we are not in it, doing nothing
Jul 23 23:55:05 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_screen_off even though we are not in it, doing nothing
Jul 23 23:55:05 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_screen_off even though we are not in it, doing nothing
Jul 23 23:55:06 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 1
Jul 23 23:55:06 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType USBHost
Jul 23 23:55:06 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBReset
Jul 23 23:55:06 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBReset
Jul 23 23:55:06 unknown UserEventAgent[12] <Warning>: DEBUG: Changing powered state: 1
Jul 23 23:55:07 unknown lockdownd[26] <Error>: libMobileGestalt computeUniqueDeviceID: total time for bb to return imei: 0
Jul 23 23:55:07 unknown lockdownd[26] <Notice>: 2ff90000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
Jul 23 23:55:07 unknown lockdownd[26] <Error>: libMobileGestalt copyMobileEquipmentIdentifier: No MEID in CT mobile equipment info dictionary - <CFBasicHash 0x11c730 [0x3f71b650]>{type = mutable dict, count = 5,
entries =>
1 : <CFString 0x11b890 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoCurrentSubscriberId"} = <CFString 0x132890 [0x3f71b650]>{contents = "310410418830324"}
2 : <CFString 0x11c700 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoCurrentMobileId"} = <CFString 0x139db0 [0x3f71b650]>{contents = "012417009917339"}
4 : <CFString 0x11c760 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoICCID"} = <CFString 0x11a9b0 [0x3f71b650]>{contents = "89014104254188303245"}
11 : <CFString 0x11b8d0 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoIMEI"} = <CFString 0x139db0 [0x3f71b650]>{contents = "012417009917339"}
12 : <CFString 0x134970 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoIMSI"} = <CFString 0x132890 [0x3f71b650]>{contents = "310410418830324"}
Jul 23 23:55:07 unknown lockdownd[26] <Notice>: 2ff90000 copy_meid: MobileGestalt failed to provide an MEID but returned no error (?)
Jul 23 23:55:07 unknown ptpd[218] <Notice>: PTP interface has been activated at high speed.
Jul 23 23:55:07 unknown kernel[0] <Debug>: launchd[218] Builtin profile: ptpd (sandbox)
Jul 23 23:55:07 unknown lockdownd[26] <Error>: libMobileGestalt computeUniqueDeviceID: total time for bb to return imei: 0
Jul 23 23:55:08 unknown atc[224] <Error>: libMobileGestalt computeUniqueDeviceID: total time for bb to return imei: 0
Jul 23 23:55:08 unknown wifid[13] <Error>: WiFi:[364794908.966216]: Client itunesstored is background application
Jul 23 23:55:13 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::endpointIOTimerExpired : IO stuck for endpoint 81, killing it
Jul 23 23:55:13 unknown kernel[0] <Debug>: GINTSTS=04008028 GINTMSK=a00c3800 GNPTXSTS=00080010 DAINT=00000000
Jul 23 23:55:13 unknown kernel[0] <Debug>: DAINTMSK=0015002b DCFG=00000010 DCTL=00000000 DSTS=00191900
Jul 23 23:55:13 unknown kernel[0] <Debug>: GRXFSIZ=0000021b GNPTXFSIZ=0010021b DPTXSIZ(1)=0040022b
Jul 23 23:55:13 unknown kernel[0] <Debug>: GAHBCFG=0000002b, GUSBCFG=00002c08, GRSTCTL=80000000
Jul 23 23:55:13 unknown kernel[0] <Debug>: DEPCTL   DEPINT   DEPTSIZ DEPDMA
Jul 23 23:55:13 unknown kernel[0] <Debug>: EP80 00008000 00000080 00000000 419c5004
Jul 23 23:55:13 unknown kernel[0] <Debug>: EP00 80028000 00000000 20080040 419c4000
Jul 23 23:55:13 unknown kernel[0] <Debug>: EP81 80888200 00000000 20080000 51e5700c
Jul 23 23:55:13 unknown kernel[0] <Debug>: EP83 004e8040 00002090 00000000 7617e65e
Jul 23 23:55:13 unknown kernel[0] <Debug>: EP85 00c98200 00002010 20000000 41f78238
Jul 23 23:55:13 unknown kernel[0] <Debug>: EP02 000a8200 00002010 00380ff4 4b4d900c
Jul 23 23:55:13 unknown kernel[0] <Debug>: EP04 80098200 00000000 02008000 42009000
Jul 23 23:55:18 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::endpointIOTimerExpired : IO stuck for endpoint 81, killing it
Jul 23 23:55:18 unknown kernel[0] <Debug>: GINTSTS=04008028 GINTMSK=a00c3800 GNPTXSTS=00080010 DAINT=00000000
Jul 23 23:55:18 unknown kernel[0] <Debug>: DAINTMSK=0015002b DCFG=00000010 DCTL=00000000 DSTS=00357b00
Jul 23 23:55:18 unknown kernel[0] <Debug>: GRXFSIZ=0000021b GNPTXFSIZ=0010021b DPTXSIZ(1)=0040022b
Jul 23 23:55:18 unknown kernel[0] <Debug>: GAHBCFG=0000002b, GUSBCFG=00002c08, GRSTCTL=80000000
Jul 23 23:55:18 unknown kernel[0] <Debug>: DEPCTL   DEPINT   DEPTSIZ DEPDMA
Jul 23 23:55:18 unknown kernel[0] <Debug>: EP80 00008000 00000080 00000000 419c5004
Jul 23 23:55:18 unknown kernel[0] <Debug>: EP00 80028000 00000000 20080040 419c4000
Jul 23 23:55:18 unknown kernel[0] <Debug>: EP81 80888200 00000000 20080000 51e5700c
Jul 23 23:55:18 unknown kernel[0] <Debug>: EP83 004e8040 00002090 00000000 7617e65e
Jul 23 23:55:18 unknown kernel[0] <Debug>: EP85 00c98200 00002010 20000000 41f78238
Jul 23 23:55:18 unknown kernel[0] <Debug>: EP02 000a8200 00002010 00380ff4 4b4d900c
Jul 23 23:55:18 unknown kernel[0] <Debug>: EP04 80098200 00000000 02008000 42009000
Jul 23 23:55:28 unknown notification_proxy[223] <Error>: Could not receive size of message: 0 Invalid argument
Jul 23 23:55:28 unknown notification_proxy[223] <Error>: Could not receive message
Jul 23 23:55:36 unknown notification_proxy[222] <Error>: Could not receive size of message: 0 Invalid argument
Jul 23 23:55:36 unknown notification_proxy[222] <Error>: Could not receive message
Jul 23 23:55:52 unknown lockdownd[26] <Notice>: 015da000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
Jul 23 23:55:52 unknown mc_mobile_tunnel[233] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jul 23 23:55:52 unknown mc_mobile_tunnel[233] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jul 23 23:55:52 unknown mc_mobile_tunnel[234] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jul 23 23:55:52 unknown mc_mobile_tunnel[234] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jul 23 23:55:52 unknown lockdownd[26] <Notice>: 015da000 set_response_error: handle_start_session SessionActive
Jul 23 23:56:06 unknown SpringBoard[50] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Jul 23 23:56:06 unknown SpringBoard[50] <Notice>: MultitouchHID: detection mode: 0->255
Jul 23 23:56:06 unknown kernel[0] <Debug>: ALS: [AppleCT700] setPropertiesGated: requested ReportInterval=0 turn OFF sensor
Jul 23 23:56:06 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 1
Jul 23 23:56:06 unknown profiled[237] <Notice>: (Note ) profiled: Service starting...
Jul 23 23:56:06 unknown profiled[237] <Notice>: (Note ) profiled: Locking device
Jul 23 23:56:07 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Jul 23 23:56:07 unknown mc_mobile_tunnel[239] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jul 23 23:56:07 unknown mc_mobile_tunnel[239] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jul 23 23:56:16 unknown kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(nr)::dormancySetIntervalGated: Setting dormancy interval to 2500 ms with mask 0x1700
Jul 23 23:56:17 unknown kernel[0] <Debug>: AppleKeyStore:timer fired
Jul 23 23:56:17 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(0)
Jul 23 23:56:17 unknown kernel[0] <Debug>: AppleKeyStore:Removing timer
Jul 23 23:56:17 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change

Obviously your phone was damaged by the fall. Take it in for evaluation, servicing and/or replacement at an Apple store or authorized service provider.
Since it is out of warranty you will, most likely, have to pay.

Send a signal, acquire the response and analyse

Similar Messages

Maybe you are looking for