Send Alert message in user's mail box

How can i send an alert message in user's mailbox(suppose in his gmail id), apart from his alert inbox in RWB ?

Hi,
Please go through these links, it will might be useful to you.
Part u2013 1:
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
Part-2:
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
Part 3:
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
Regards,
Rajesh

Similar Messages

Voice Mail Messages not reaching e-mail boxes

I have an Exchange 2010 server and a Panasonic phone system with voice mail. Until recently my users could transfer voice mail messages to their e-mail as an attached WAV file. I have not made any significant changes that should affect this functionality.
I worked with a voice system technician who verified that the messages are being created and sent by the VM System. However, they are no longer being delivered to the users e-mail box.
I checked to make sure that the password is correct for the mail account, I have white listed the voicemail system in the Exchange Server, and I have tested e-mail to and from the special e-mail account established for this purpose and all seem to work correctly.
I am wondering if there is some new security requirement or SPAM filter in Exchange which might be getting in the way.

See:
http://technet.microsoft.com/en-us/library/bb124531(v=exchg.141).aspx
By default, the Receive connector protocol log files are located at C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs\ProtocolLog\SmtpReceive, and the Send connector protocol log files are located at C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs\ProtocolLog\SmtpSend.
The directory must be local to the Exchange 2010 computer.
If Exchange received the message, you can also check message tracking on the Exchange Server.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Sending Alert Messages to File System

Hi,
I am trying to implement a scenario in PI which automatically processes alert message generated by the Alert Framework (the messages are processed in a message mapping). Therefore I am sending alerts via mail and receive these mails afterwards with an integration scenario PI. As this does not work if the mail server is offline I am searching for a possibility to send alert messages directly to the file system. Is there a way to do this? Or do you have any other suggestions how I could handle this problem?
Regards,
Christian

HI Christian,
The other option to get the alerts is to regster for SMS alerts to your mibile, in addition to the mail alerts.
Regards
Venkat

Failed to send Alert Message to Browser

We are gettign this problem intermittently when user click End or Hangup button. We are not triggering any alert on these events. Once the user get this problem, he /she has to reboot the system in order to come out of this error. I was looking SND forum and another place many people have reported the same problem and it it surprising that no one have clear idea why this problem happening. I would appreciate if someone have this problem and fixed it. I could not find any note related to this.
So I have already checked the SDN forun
Re: CRM 2007-IC Web Interface Message - Failed to send Alert Message to Browser

Unfortunately, we were unable to replicate and SAP was unable to investigate because of this. They did provide a bit of information in their response of Aug 6 I have included below. Hopefully that may help your situation reWgarding this message.
Our message expired (confirmed automatically) on Sep 20th. I have not had another report of this from our call centre since we applied the Support Packs (3,4,5) on August 16th.
2009-08-06 - 01:08:48 MST - Reply by SAP
Hello Donna,
Thanks for understanding the problem. Yes we know some customer getting
the message but when this error will come is very clear on the below
scenarios.
1. the customer uses https protocol and if the ssl is not correctly
configured then when they send an alert message / broadcast message the
message will appear.
2. Always when they a alert message is to be displayed/ or when sending
a broadcasting message / while clicking on the END button.
But this will happen always but not randomly.
So we will hope that the message will not come after you do an
upgrade.
Regards,
Kiruthika
2009-08-05 - 12:24:19 MST - Info for SAP by Donna Jackson
Unfortunately, we don't know how to reproduce this issue so it will be
very difficult to move forward until we understand what is causing it.
I was hoping the message might be familiar to someone at SAP Support
and SAP might provide some clues on what could be causing it.
We will be applying Support Packs 3, 4 and 5 in our Production
Environment in a couple of weeks and maybe that will make a difference
and this message will not appear again after that.
Thank you for your time and effort - you can put the message back in
our court after you read this and I will let it expire on the auto
close date - on the off chance that the issue pops up again after our
go-live with Support Packs, I will supply further info if I can prior
to the auto close date if we have reoccurence of the message.

How can I delete the 50 old email messages in the "ALL MAIL" box of my iphone 4s

How can I delete all of the 50 old messages in the "ALL MAIL" Box of my iphone 4s?

Blueyonder got bought out by Virgin Media didn't they, in which case they now use a Google server?
You should be able to log on using the web and delete everything from there:
mail.blueyonder.co.uk

I had a message that shows my mail box is full, i have deleted all my file but unfortunatly it shows no change on the storage at all

i had a message that shows my mail box is full, i have deleted all my file but unfortunatly it shows no change on the storage at all

Ditto on Clinton's suggestion using OmniDiskSweeper. It is an excellent tool.
It may seem elementary, but do empty Trash. Only then do you gain storage space.
You may also find a few hints here:
http://pondini.org/OSX/DiskSpace.html
Ciao.

Error Message 006 Failed to send Alert message

Hi all,
In IC web client (CRM5.0) , in the browser showing an error message
'Failed to send alert message to browser (Message Class CRM_IC_ALERT - message number 006).
Please give me a solution to rectify it.
Thanks

Hi, Andrei!
Seems that it's help! I set security settings to default in both browser and Alerts began to work.
Thanks!
Best regards,
Anton

Error message: "Cannot send alert message to browser" on Rule Policy

Hi Experts.
Have anybody experience with the error message "Cannot send alert message to browser" on Rule Policies? The condition-check of the rule is working fine. But the error message shown appears in the web UI Similar exception on Complaints Error Message but no answer. Is it possible that the SSL settings are responsible for that error message? Any ideas? Thanks a lot!
Regards
Tobias

Hi Leon,
thanks for you fast response!
- The method "send_alert_message" has thrown following exception
"Exception: An exception (CX_SAM_MESSAGING_EXCEPTION) occurred. Message no. TPDA430."
on that line of code: line 91: sam_sender->send_to_client( message = sam_message ).
I looked inside:
- In the method "_SEND (CL_SAM_SESSION_QUEUE_SENDER)"
line 101: http_client->receive( EXCEPTIONS http_communication_failure = 1 ... )
The sy-subrc will be set to 1.
I looked inside:
- In the method "IF_HTTP_CLIENT~RECEIVE (CL_HTTP_CLIENT)"
line 885: reason = response->get_header_field( 'sap-icmclnterror' ).
Here the "reason" will be set to "Native SSL Error".
Any ideas how to solve this problem?
Thanks a lot.
Regards,
Tobias

I want to send notifications to outside(i,e mail box) from oracle, and users will approve the notification from email

Hi
I have a client required to send notifications to outside email box, and also user will approve this notification through email.(i,e not logged into oracle and approve it) in 11i instance.
i need to send mail from po department to finance department
once finance department approves , then mail back to po department that your notificaiton approved.
from address:=[email protected]
to address:=[email protected]
as part of this we did IMAP set up
and used the following code. and getting the notifications from Oracle to my mail box.
my main issue is when user approves the wf notifications, it is not showing my specified email address in the attribute #WFM_REPLYTO, always it is showing the IMAP set up wfdev address
what is the value i need to use for this #WFM_REPLYTO
eventhough i am sending the to_address email id to the following attribute(wf_engine.setitemattrtext), the workflow approval not working for that email id.
only if i am using the '[email protected]' in the imap set up, then only approval is working.
how can i override this to_email address value([email protected]) to my desired email address?
wf_engine.setitemattrtext (itemtype => l_item_type,
itemkey => l_item_key,
aname => '#WFM_REPLYTO', -- to_ address
avalue => '[email protected]' -- [email protected]
if any body having some sample code related to this please share on this.
Thanks
sam

Sam,
Can you find any errors in the Workflow log file?
Please review the following docs.
Setting Different Values For Attributes #WFM_FROM & #WFM_REPLYTO Does Not Happen Or Results In SAXParseException (Doc ID 1455191.1)
How To Change The Default From and Reply To Email Address For Workflow Email Notifications (Doc ID 760477.1)
Thanks,
Hussein

Sending Alert messages through mail

Hi all,
After configuring alerts and got the relavent messages, I need to send some alert messages to perticular persons.
How and where I should configure this.
If anyone is having related information would be very useful to me.
Venu

Hi,
<i>I need to send some alert messages to perticular persons</i>
Did you have a look at,
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
This is the best one assuming you have already configured alerts.
"Configuring scenario specific E-mail alerts in XI-CCMS"
And also
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Regards,
Anirban.

ALV output converted into PDF format and send that PDF to user through mail

Hi Experts,
I have report earlier its output was in alv grid.
Now i want that ALV output converted into PDF format.And that PDF output send to user through mail.
Can u please tell how to do?
My code is here(output is displaying in ALV grid).
INCLUDE <icon>.
TYPE-POOLS: slis, kkblo.
TABLES : zmsd_freight_hdr, zmsd_freight_det, zmsd_blinfo, zmsd_diheader.
TABLES : lfa1.
DATA : t_hdr   LIKE   zmsd_freight_hdr   OCCURS 0 WITH HEADER LINE,
       T_DET   LIKE   ZMSD_FREIGHT_DET   OCCURS 0 WITH HEADER LINE,
       t_bl    LIKE   zmsd_blinfo        OCCURS 0 WITH HEADER LINE,
       t_di    LIKE   zmsd_diheader      OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_det OCCURS 0.
        INCLUDE STRUCTURE zmsd_freight_det.
DATA    type(30).
DATA: END OF t_det.
DATA: v_target2(30),
      v_zsammg LIKE t_det-zsammg,
      v_gsttotal LIKE t_det-zamount.
DATA : BEGIN OF t_data OCCURS 0,
         zsammg       LIKE zmsd_freight_hdr-zsammg,
         zdidbl       LIKE zmsd_freight_hdr-zdidbl,
         zvkorg       LIKE zmsd_freight_hdr-zvkorg,
         zinvno       LIKE zmsd_freight_hdr-zinvno,
         zttlamt      LIKE zmsd_freight_hdr-zttlamt,
         zstatus      LIKE zmsd_freight_hdr-zstatus,
         ztype        LIKE zmsd_freight_hdr-ztype,
         zconfirm     LIKE zmsd_freight_hdr-zconfirm,
         zconfirmdate LIKE zmsd_freight_hdr-zconfirmdate,
         erdat        LIKE zmsd_freight_hdr-erdat,
         ernam        LIKE zmsd_freight_hdr-ernam,
         erzet        LIKE zmsd_freight_hdr-erzet,
         aedat(10),
         aenam        LIKE zmsd_freight_hdr-aenam,
         aezet        LIKE zmsd_freight_hdr-aezet,
         zline        LIKE zmsd_freight_det-zline,
         zfptype      LIKE zmsd_freight_det-zfptype,
         zchrcode     LIKE zmsd_freight_det-zchrcode,
         zcurcode     LIKE zmsd_freight_det-zcurcode,
         zqty         LIKE zmsd_freight_det-zqty,
         zuom         LIKE zmsd_freight_det-zuom,
         zrate        LIKE zmsd_freight_det-zrate,
         zamount      LIKE zmsd_freight_det-zamount,
         zexrate      LIKE zmsd_freight_det-zexrate,
       zccode       LIKE zmsd_blinfo-zccode,      "MADK991565
         zccode       like ZMSD_FREIGHT_HDR-zfcode, "MADK991565
         zbldate(10),
         zbl          LIKE zmsd_blinfo-zbl,
         type(3),
         waerk        LIKE zmsd_freight_det-zcurcode,
         zamountl     LIKE zmsd_freight_det-zamount,
       END OF t_data.
DATA : w_layout      TYPE   slis_layout_alv,
       w_catalog     TYPE   slis_fieldcat_alv,
       t_catalog     TYPE   slis_t_fieldcat_alv,
       w_sort        TYPE   slis_sortinfo_alv,
       t_sort        TYPE   slis_t_sortinfo_alv.
DATA   V_ZINVNO    like   T_HDR-ZINVNO.                   "MADK991565
DATA : v_count TYPE i.
SELECTION-SCREEN BEGIN OF BLOCK a0 WITH FRAME TITLE text-001.
PARAMETERS     : p_zvkorg LIKE zmsd_freight_hdr-zvkorg OBLIGATORY .
SELECT-OPTIONS : s_zdidbl FOR zmsd_freight_hdr-zdidbl             ,
                  s_zccode FOR lfa1-lifnr                          ,
                  s_status FOR zmsd_freight_hdr-zstatus            ,
                  s_ztype FOR zmsd_freight_hdr-ztype              ,
                  s_erdat FOR zmsd_freight_hdr-erdat              ,
                  s_ernam FOR zmsd_freight_hdr-ernam              ,
                  s_zconfd FOR zmsd_freight_hdr-zconfirmdate       .
PARAMETERS     : p_zconf AS   CHECKBOX                            .
SELECTION-SCREEN END OF BLOCK a0.
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE text-002.
PARAMETERS     : p_hdr    RADIOBUTTON GROUP rad DEFAULT 'X'        ,
                  p_det    RADIOBUTTON GROUP rad                    .
SELECTION-SCREEN END OF BLOCK a1.
INITIALIZATION.
AT SELECTION-SCREEN.
START-OF-SELECTION.
PERFORM get_data.
PERFORM process.
PERFORM display.
END-OF-SELECTION.
PERFORM fm_get_num_pages.
AT USER-COMMAND.
AT LINE-SELECTION.
TOP-OF-PAGE.
PERFORM fm_top_of_page USING '7010' sy-title space.
FORM get_data.
SELECT   *
    FROM   zmsd_freight_hdr
    INTO   TABLE t_hdr
   WHERE   zvkorg        EQ p_zvkorg
     AND   zdidbl        IN s_zdidbl
     AND   zstatus       IN s_status
     AND   ztype         IN s_ztype
     AND   erdat         IN s_erdat
     AND   ernam         IN s_ernam
     AND   zconfirmdate IN s_zconfd
     AND   ZFCODE        IN S_ZCCODE.                      "MADK991565
IF p_zconf = 'X'.
    DELETE t_hdr WHERE zconfirm NE 'C'.
ENDIF.
CHECK NOT t_hdr[] IS INITIAL.
SELECT   *
    FROM   zmsd_blinfo
    INTO   TABLE t_bl
     FOR   ALL ENTRIES IN t_hdr
   WHERE   zsammg = t_hdr-zsammg.
SORT t_bl BY zsammg.
SELECT   *
    FROM   zmsd_diheader
    INTO   TABLE t_di
     FOR   ALL ENTRIES IN t_hdr
   WHERE   zsammg = t_hdr-zsammg.
SORT t_di BY zsammg.
IF P_DET = 'X'. "MADK933361
SELECT   *
    FROM   zmsd_freight_det
    INTO   TABLE t_det
     FOR   ALL ENTRIES IN t_hdr
   WHERE   zsammg = t_hdr-zsammg
   AND ZINVNO = T_HDR-ZINVNO .                           "MADK991565
SORT t_det BY zsammg zline.                            "MADK991565
   SORT T_DET BY ZSAMMG ZINVNO ZLINE.                     "MADK991565
ENDIF. "MADK933361
ENDFORM.
FORM process.
REFRESH t_data.
CLEAR v_gsttotal.                                         "MADK933361
LOOP AT t_hdr.
Start of MADK933361
    CLEAR: v_target2.
    v_zsammg = t_hdr-zsammg.
    V_ZINVNO = T_HDR-ZINVNO.                                "MADK991565
   AT NEW zsammg.                                         "MADK991565
     AT NEW ZINVNO.                                         "MADK991565
      PERFORM get_gst_value.
    ENDAT.
End of MADK933361
    PERFORM move_header.
    CHECK t_data-zccode IN s_zccode.
    IF p_det = 'X'.
CSF Project Changes Starts   DEV34    MADK985782
    LOOP AT T_DET WHERE ZSAMMG = T_HDR-ZSAMMG..
      LOOP AT t_det WHERE zsammg = t_hdr-zsammg AND
                          zinvno = t_hdr-zinvno.
CSF Project Changes Ends     DEV34    MADK985782
        PERFORM move_header.
        CHECK t_data-zccode IN s_zccode.
        MOVE-CORRESPONDING t_det TO t_data.
        t_data-zamountl = t_data-zamount * t_data-zexrate.
        APPEND t_data.
        CLEAR t_data.
      ENDLOOP.
    ELSE.
      APPEND t_data.
      CLEAR t_data.
    ENDIF.
    AT END OF zsammg.
      CLEAR v_gsttotal.
    ENDAT.
*Start of changes for IS090901289-PIA MADK991565
    AT END OF ZINVNO.
      CLEAR V_GSTTOTAL.
    ENDAT.
*End of changes for IS090901289-PIA MADK991565
ENDLOOP.
ENDFORM.
FORM move_header.
MOVE-CORRESPONDING t_hdr TO t_data.
t_data-zttlamt = t_data-zttlamt + v_gsttotal.             "MADK933361
t_data-waerk = 'SGD'.
IF NOT t_hdr-aedat IS INITIAL.
    WRITE: t_hdr-aedat TO t_data-aedat.
ELSE.
    CLEAR : t_data-aedat.
ENDIF.
READ TABLE t_bl WITH KEY zsammg = t_hdr-zsammg BINARY SEARCH.
IF sy-subrc EQ 0.
t_data-zccode = t_bl-zccode.   "MADK991565
    T_DATA-ZCCODE = T_HDR-ZFCODE.   "MADK991565
    IF NOT t_bl-zbldate IS INITIAL.
      WRITE: t_bl-zbldate TO t_data-zbldate.
    ENDIF.
    t_data-zbl     = t_bl-zbl.
    t_data-type    = 'DBL'.
ELSE.
    READ TABLE t_di WITH KEY zsammg = t_hdr-zsammg BINARY SEARCH.
    IF sy-subrc EQ 0.
    t_data-zccode = t_di-zdiforcode.     "MADK991565
      T_DATA-ZCCODE = T_HDR-ZFCODE.         "MADK991565
      t_data-type    = 'DI'.
    ENDIF.
ENDIF.
ENDFORM.
FORM display.
IF t_data[] IS INITIAL.
    MESSAGE s398(00) WITH 'No Data Selected'.
    EXIT.
ENDIF.
DATA : l_repid LIKE sy-repid.
l_repid = sy-repid.
REFRESH t_catalog.
CLEAR   t_catalog.
w_layout-cell_merge = 'X'.
PERFORM map_fields.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            i_callback_program      = l_repid
            i_callback_user_command = 'ALV_USER_COMMAND'
            is_layout               = w_layout
            it_fieldcat             = t_catalog[]
            i_grid_title            = sy-title
            i_save                  = 'A'
            it_sort                 = t_sort[]
       TABLES
            t_outtab                = t_data
       EXCEPTIONS
            program_error           = 1
            OTHERS                  = 2.
IF sy-subrc <> 0.
ENDIF.
ENDFORM.
FORM map_fields.
Sort Order
CLEAR v_count.
PERFORM sf USING 'ZDIDBL'   'X' 'X'.
Fields to be displayed
CLEAR v_count.
IF p_hdr = 'X'.
    PERFORM af USING :
   DESCRIPTION       FIELD        LEN   RTABLE             RFIELD
    'DI/DBL         ' 'ZDIDBL'     '14' '                ' '        ',
    'Type           ' 'TYPE'       '04' '                ' '        ',
    'Forwarder Code ' 'ZCCODE'     '14' '                ' '        ',
    'BL Number      ' 'ZBL'        '14' '                ' '        ',
    'BL Date        ' 'ZBLDATE'    '10' '                ' '        ',
    'Invoice Number ' 'ZINVNO'     '15' '                ' '        ',
    'Extraction     ' 'ZSTATUS'    '05' 'ZMSD_FREIGHT_HDR' 'ZSTATUS ',
    'Freight Type   ' 'ZTYPE'      '05' 'ZMSD_FREIGHT_HDR' 'ZTYPE   ',
    'Confirmation   ' 'ZCONFIRM'   '05' 'ZMSD_FREIGHT_HDR' 'ZCONFIRM',
    'Confirm Date   ' 'ZCONFIRMDATE' '10' 'ZMSD_FREIGHT_HDR'
'ZCONFIRMDATE',
    'Total Amount   ' 'ZTTLAMT'    '18' '                ' '        ',
    'Created On     ' 'ERDAT'      '10' '                ' '        ',
    'Created By     ' 'ERNAM'      '10' '                ' '        ',
    'Changed On     ' 'AEDAT'      '10' '                ' '        ',
    'Changed By     ' 'AENAM'      '10' '                ' '        '.
ELSE.
    PERFORM af USING :
   DESCRIPTION         FIELD     LEN   RTABLE             RFIELD
    'DI/DBL           ' 'ZDIDBL'   '14' '                ' '        ',
    'Type             ' 'TYPE'     '04' '                ' '        ',
    'Forwarder Code   ' 'ZCCODE'   '14' '                ' '        ',
    'BL Number        ' 'ZBL'      '14' '                ' '        ',
    'BL Date          ' 'ZBLDATE' '10' '                ' '        ',
    'Invoice Number   ' 'ZINVNO'   '15' '                ' '        ',
    'Extraction       ' 'ZSTATUS' '05' 'ZMSD_FREIGHT_HDR' 'ZSTATUS ',
    'Freight Type     ' 'ZTYPE'    '05' 'ZMSD_FREIGHT_HDR' 'ZTYPE   ',
    'Confirmation     ' 'ZCONFIRM' '05' 'ZMSD_FREIGHT_HDR' 'ZCONFIRM',
    'Confirm Date     ' 'ZCONFIRMDATE' '10' 'ZMSD_FREIGHT_HDR'
'ZCONFIRMDATE',
    'Total Amount     ' 'ZTTLAMT' '18' '                ' '        ',
    'Freight Payment ' 'ZFPTYPE' '14' '                ' '        ',
    'Charge Code      ' 'ZCHRCODE' '10' '                ' '        ',
    'Currency         ' 'ZCURCODE' '08' '                ' '        ',
    'Quantity         ' 'ZQTY'     '13' '                ' '        ',
    'UoM              ' 'ZUOM'     '04' '                ' '        ',
    'Rate             ' 'ZRATE'    '15' '                ' '        ',
    'Amt(Foreign Curr)' 'ZAMOUNT' '16' '                ' '        ',
    'Exchange Rate    ' 'ZEXRATE' '13' '                ' '        ',
    'Amt(Local Curr) ' 'ZAMOUNTL' '16' '                ' '        ',
    'Created On       ' 'ERDAT'    '10' '                ' '        ',
    'Created By       ' 'ERNAM'    '10' '                ' '        ',
    'Changed On       ' 'AEDAT'    '10' '                ' '        ',
    'Changed By       ' 'AENAM'    '10' '                ' '        '.
ENDIF.
ENDFORM.
FORM af USING text
              field
              len
              table
              reffield.
v_count = v_count + 1.
w_catalog-col_pos       = v_count.
w_catalog-fieldname     = field.
w_catalog-ref_tabname   = table.
w_catalog-ref_fieldname = reffield.
w_catalog-seltext_s     = text.
w_catalog-seltext_m     = text.
w_catalog-seltext_l     = text.
w_catalog-outputlen     = len.
IF field = 'ZTTLAMT' OR field = 'ZAMOUNTL'.
    w_catalog-no_zero     = 'X'.
    w_catalog-cfieldname = 'WAERK'.
    w_catalog-datatype    = 'CURR'.
ENDIF.
IF FIELD = 'ZRATE' OR FIELD = 'ZAMOUNT'.
IF field = 'ZAMOUNT'.
    w_catalog-no_zero     = 'X'.
    w_catalog-cfieldname = 'ZCURCODE'.
    w_catalog-datatype    = 'CURR'.
ENDIF.
IF field = 'ZQTY' OR field = 'ZRATE'.
    w_catalog-no_zero     = 'X'.
    w_catalog-datatype = 'DEC'.
ENDIF.
APPEND w_catalog TO t_catalog.
CLEAR w_catalog.
ENDFORM.
FORM sf    USING   fieldname sortup group.
v_count = v_count + 1.
CLEAR w_sort.
w_sort-fieldname = fieldname.
w_sort-spos      = v_count.
w_sort-up        = sortup.
w_sort-group     = group.
APPEND w_sort TO t_sort.
ENDFORM.
FORM alv_user_command USING in_ucomm    LIKE sy-ucomm
                             in_selfield TYPE slis_selfield.
DATA: lfs_data LIKE t_data.
IF in_ucomm = '&IC1'.
    READ TABLE t_data INDEX in_selfield-tabindex INTO lfs_data.
    CHECK NOT lfs_data-zdidbl IS INITIAL.
    IF lfs_data-type = 'DBL'.
      DATA: l_zdbl LIKE zmsd_diheader-zdinum.
      l_zdbl = in_selfield-value.
      EXPORT l_zdbl TO MEMORY ID 'VBL'.
      CALL TRANSACTION 'ZMSD_BL01'.
    ENDIF.
    IF lfs_data-type = 'DI'.
      DATA: v_dinum LIKE zmsd_diheader-zdinum.
      v_dinum = in_selfield-value.
      EXPORT v_dinum TO MEMORY ID 'VDI'.
      CALL TRANSACTION 'ZMSD_DI01'.
    ENDIF.
ENDIF.
ENDFORM.
FORM get_gst_value.
LOOP AT t_det WHERE zsammg = v_zsammg
     AND ZINVNO = V_ZINVNO.                              "MADK991565
    CHECK t_data-zccode IN s_zccode.
    t_det-zamount = t_det-zamount * t_det-zexrate.
    SELECT SINGLE y0mmtarget2
            INTO   v_target2
            FROM   y0mmipstranslate
            WHERE y0mmdatatype = '70' AND
                   y0mmsource = t_det-zchrcode.
    SELECT SINGLE y0mmtarget1
           INTO   t_det-type
           FROM   y0mmipstranslate
           WHERE y0mmdatatype = '76' AND
                  y0mmsource = v_target2.
    IF t_det-type NE '3Z'.
      v_gsttotal    = v_gsttotal +
                           ( t_det-zamount * 5 / 100 ).
    ENDIF.
ENDLOOP.
Regards,
Raj.

Hello,
Following is the procedure to convert alv output to spool and then it to PDF Format.
After we display the ALV, we can check whether it is running in the background using system field u2018sy-batchu2018. Then,we call an function module named u2018GET_JOB_RUNTIME_INFOu2019 to get the current job information. Then go to spool request table tbtcp to get the spool id.
Get current job details
CALL FUNCTION u2018GET_JOB_RUNTIME_INFOu2019
       IMPORTING
            eventid                 = gd_eventid
            eventparm               = gd_eventparm
            external_program_active = gd_external_program_active
            jobcount                = gd_jobcount
            jobname                 = gd_jobname
            stepcount               = gd_stepcount
       EXCEPTIONS
            no_runtime_info         = 1
            OTHERS                  = 2.
SELECT * FROM tbtcp
                 INTO TABLE it_tbtcp
                 WHERE      jobname     = gd_jobname
                           AND jobcount = gd_jobcount
                           AND stepcount = gd_stepcount
                           AND listident <> u20180000000000u2032
                           ORDER BY   jobname
                                               jobcount
                                               stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
Finally, we can call function module u2018CONVERT_ABAPSPOOLJOB_2_PDFu2018 to convert spool reqeust(which is stored in OTF format) to PDF format. Then we can call either function module u2018SO_DOCUMENT_SEND_API1u2032 or SAP BCS (Business Communication Service) to send the pdf as an email attachment.
CALL FUNCTION u2018CONVERT_ABAPSPOOLJOB_2_PDFu2019
       EXPORTING
            src_spoolid              = gd_spool_nr
            no_dialog                = c_no
            dst_device               = c_device
       IMPORTING
            pdf_bytecount = gd_bytecount
       TABLES
            pdf = it_pdf_output
       EXCEPTIONS
            err_no_abap_spooljob     = 1
            err_no_spooljob          = 2
            err_no_permission        = 3
            err_conv_not_possible    = 4
            err_bad_destdevice       = 5
            user_cancelled           = 6
            err_spoolerror           = 7
            err_temseerror           = 8
            err_btcjob_open_failed   = 9
            err_btcjob_submit_failed = 10
            err_btcjob_close_failed = 11
            OTHERS                   = 12.
Regards,
Sayali
Edited by: Sayali Paradkar on Apr 20, 2010 12:51 PM

Sending Alert Message to mobile device from SAP

Hello Experts,
Can i send an alert message directly to any mobile device from SAP ? or i have to used Sybase as a middle layer ?
And is there any way to send alert through Sybase Server without creating its MBO ?
Regards,
Tapan

Hi Tapan,
well, if I would have to do that..... I would at least need Sybase to keep development low. at the end you do not really need Sybase for this... but without SUP development effort is really high.
Okay, in short:
each device has its wn dedicated listener concept for push messages. This is platform dependend and you need to develop a native solution for this. It is possible, but it takes some time.
If you want to be native, with Sybase you get this more or less for free. Issue here: Sybase does only support push notifications out of the box in the most complex scenario: therefore you need SAP backend, Netweaver Mobile Middleware, SUP and connect NW Mobile and SUP by ESDMA file. This gives you push from backend to device for free on nearly all plattforms out of the box.
So at the end the first question qould be: how much do you want to develop?
Or is it wnough for you to have SUP workflow? Benefit on Workflow: development effort is low, works out of the box, is multi plattform - but like every sunshine there is some shadow - performance of this approach is not really nice. Anyway, it could solve your issue: you receive an eMail in your device, this opens the workflow app and you can accept or decline for example a travel request.
Would that elp?
Regards,
Oliver

Notification email to user related mail box

Hello experts , i am not a security specialist , my question might be very simple :
Is it possible to realize below function : that the system generate an notification to user's email box before the expiration date reaching ( For example , the user's id will be deleted automatically if no log-in in 60 days )
if yes , how ?
Thanks

Hi,
Yes it is possible through a custom program. I have worked on the designing of such a program which automatically end-dates and deletes users in a system due to inactivity of user Ids for a specific period of time. Before end-dating/deleting them, it does send auto-notification to user's email inbox (outlook) providing a headsup to the usesr and also states action required on their part. The program has been running successfully without any problems.
For the email to be sent from SAP to user's email inbox, you must have configurations done for sending emails to internet address via SCOT and SO16 transaction codes.
You may work with your developer to design the logic. In case you guys are maintaining email address of users in "Email" field of SU01 then you can get a list of user IDs vs Email address from the system using tables USR 21 and ADR6 (Plugin Username in USR21 and get the Person number, again the person number can be plugged into ADR6 to get the corresponding email address of the user).
I have a functional specification for the entire logic with me which you may tailor according to your requirement. Let me know if you would need that. Hope this is helpful.
Regards,
Sandipan

I am trying to "pin" to pinterest through a dialogue box and nothing happens when I hit "pin" and I also tried to send a message through linked in dialogue box and nothing happens when I hit "send"

Why does nothing happen when I'm trying to perform an action/command through a pop-up dialogue box, such as sending a message on linkedin or attempting to pin on pinterest?

All future installs/updates of Muse (and most other Adobe apps) are through the Creative Cloud desktop app. Thus you do need to have it installed.
Are you on Windows or Mac? What OS version?

Sending Picture messages to an e-mail address usin...

Hello, tried a search but could not find any similar topics. I have upgraded from the 6230i to the 6280. On the 6230i I was able to send a picture message to an e-mail account. It would appear that I cant do this with the 6280. Can anybody help with this query Thanks

Your form code is incorrect. There are some areas that are
not formatted properly and some areas that are just written wrong!
For instance your checkbox input form fields do not have a value so
when someone checks it and sends you the form you would not receive
any information even if your php code was correct. You need the
action of your form to be sent to your_php_script.php which should
include the php script along with a confirmation message that the
form was sent. The php code you have is not properly concatenated
please look at the code I've provided and retry. You need to be
specific about quotations, periods, etc. the name on your form
fields has to be the same as the $variable in php code. You have
areas all over your form code that do not belong for instance this.
<div align="center"></div>
<span id="sprycheckbox1">
<label> </label>
</span>
and this.
<div align="center"></div>
<div align="center"></div>
<div align="center"></div>
and this
<h1> </h1>
My recommendation is to look at the code I've provided, study
it, grasp the concept. Best of luck to you.
Jasper

Send Alert message in user's mail box

Similar Messages

Maybe you are looking for