Send an e-mail after creat Test Plan STBW_2

Hi All,
I am working Solman 7.0 and creating Test Plan from STWB_2. But as we know is "standard" to send e-mails to resources are assigned each activity inside test plan as information about version 7 - EHP1.
I've hust check out configuration in STBW_SET and is ok too. Maybe there are other customizing necessary to active this e-mails.
Regards,
Warlei Figueiredo.

Warlei,
See the SAP Note 1348140 - E-mail notification in test sequence does not work.
Good luck!
Best regards,
Jacques.

Similar Messages

  • Sending an e-mail after creating a transport (VT01)

    Does anybody know if there is an user-exit after saving a transport?
    Thanks.

    Hi Susana,
    To get this requirement you need to do the output determination configuration for the shipments in IMG.
    SPRO>Logistics Execution>Transportation>Basic transportation functions>Output control-->Maintain output determination for shipments.
    You define ouyput type here to send the mail.
    Take help of ABAPer to develop the output program in such wayand assign that to the output type.
    I hope it will help you,
    Regards,
    Murali.

  • Solution Manager: Creating test plan - no test cases uploaded show up

    Hi,
    I am attempting to create test plans that include all the test case documents that I uploaded to the system.  Unfortunately, when I upload the documents, check them out and then in again, and then go to stwb_2 to create a test plan, the documents do not show up in the test plan structure.
    Why is this and is there someway to make the documents show up?
    Thank you!
    Edited by: acraver on Mar 13, 2009 6:37 PM

    Have u tried regenerating the Test plan by going to change mode and pressing the generate button after selecting the documents
    Secondly what is the status of the doc is it change
    Note whn u generate the test plan you have to chooose the Status of the Test Documents.
    Hope it solve ur problem
    Regards
    Prakhar

  • How do i send an e-mail after it is scanned?

    How do I send an e-mail after I scanned the document?

    Hello!!
    You can open your email, then click on add attachments and then search for your scanned document, should be in the my scans folder in your my documents if you are using windows. When you find the document and attach it to your email just hit send on your email.
    I am a HP employee.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Cannot send or receive mail after installing iOS6 on iPhone4

    Cannot send or receive mail after installing iOS6 on iPhone4.
    All email accounts are still fine and not lost but ever since I installed iOS6 I cannot send any new email and I am not receiving either. That includes my Exchange, Yahoo  and Hotmail. I didn't loose any old email in my Inboxes.
    Can someone help please. thanks.

    I am having a similar problem.  I have iPhone 4 with the updated iOS6 and a Hotmail account.  Mail had been working after the update, but I noticed that wasn't really pushing my mail like it used to before the update.  I wouldn't get notifications after the update and when I open the Mail app, it would take much longer to download emails.  I decided to remove my Hotmail account and then re-add the account to the phone to see if that would fix the problem.  No such luck.  Now I have zero emails in my inbox on my phone when there is new email sitting in my Hotmail inbox on my laptop.  I've tried to delete and add the account multiple times now while rebooting the device and nothing changes...I've looked into other fixes mentioned here that say to change the settings on cellular date, airplane mode, push vs fetch, etc. and nothing is working.  Any help is greatly appreciated.

  • How to send a mail about the test plan status

    Hi
    I have finished the development of ecatt automation test cases.
    And I have integrated the ecatt  automation test cases into the test plan of TWB.
    I have scheduled a job in background to run the test plan.
    After the job has finished, I need to send a email to related users to tell them the status of each test cases in the test plan.
    Is there any way to implement it?
    Thanks a lot in advance!

    Hello,
    You can send mail with the status of the test catalog-
    specify a mail system to which Test Workbench test objects send messages to the people responsible
    Please refer the below link for more information:
    http://help.sap.com/saphelp_smehp1/helpdata/en/6a/88370a002911d2bd02080009b4534c/frameset.htm
    Regards,

  • Test Note (Documentation Type) when creating Test Plan

    Hi Gurus.
    After we upgraded our SolMan 7.0 system from Support Pack (ST component ) level 19 to level 25,  I noticed this new field "Test Note" (Dcoumentation Type) when creating a Test Plan in transaction STWB_2.
    Initially, when I haven't chosen any project yet, this field has a list-of-values (i.e. Test Case Note, iTutor Document) but when I choose a project, the list-of-values only showing "ST". I also tried choosing another project and there is no value in the list.
    Does anyone know where this list is coming from or how I can configure this?
    It looks like project-related and but I couldn't find any settings for this.
    Can this field be turned off so it will not show in the screen?
    Thanks,
    Tess

    Hi Tess,
    The documentation type ST is the standard documentation type for test notes.
    Test notes are needed by testers to document results in detail during/after testing a test case.
    In SOLAR_PROJECT_ADMIN  there is the text menu 'GOTO - Project Template - Implementation Projects'
    and then there to the tap 'Documentation Types' to do the default settings for 'ST' for all implementation projects.
    Otherwise you'll have to change settings in the administration for each project!
    There you can assign your own documentation template for ST in the central settings.
    If you are using other project types for testing you'll have to do the same for each project type.
    Regards,
    Adelbert

  • How to send automatic "reminder mails" after certain time

    Hi Experts,
    There is a problem which I am not able to solve, Please help !
    Requirement: 1. After the creation of a certain task, a mail should go to the user... this I have done using the Java Mail API.
    *2. After 2 days if the user don perform certain task, a reminder mail should be send to him EVERYDAY after the INITIAL 2 days.*
    how to achieve this in the Java mail.. I have heard of Java mail Schedulers but I am not able to find it.. If you can give me some guide or some steps or some article for this I would be very very gratefu to you.
    Please treat it as urgent and give your valuable suggestions.
    Thanx in advance.
    Regards,
    Rajat

    Nope. It means that if you want to schedule something, use code which does scheduling. Like Quartz for example. Bear in mind that the "something" in this case would involve sending an e-mail, but your scheduler wouldn't care about that.

  • Sending automatic e-mail after change credit limit

    Hi All,
    I need to send an external e-mail after a change credit limit happened.
    If the credit manager changes the credit limit credit-KNKK KLIMKE (via FD32 tcode), when he click on "save" I need to send an automatic e-mail to the the customer manager.
    I didn't find any user-exit or enhancement.
    Can anyone help me or show me how to solve the problem?
    Thanks in advance
    Leo

    Hi,
    If the calendar is not an Exchange or CalDAV calendar try iCal Reply Checker.
    http://discussions.apple.com/thread.jspa?messageID=10256493&#10256493
    Best wishes
    John M

  • Create Test Plan from Solution or Project

    Hi,
    When creating a Test Plan does it matter if it is from the Solution or a Project?
    thanks

    Hi,
    I guess the first question should be which version of Solution Manager are you using, 7.0 or 7.1.
    The process is typically to create a project, document the business process hierarchy, assign Test Cases to the business process hierarchy, and create a test plan which allows you to select the processes to be tested and the test cases.  If there are no test cases assigned to processes then the test plan cannot be created.
    A simple rule is that an Implementation Project is used to implement new business processes and during this project you document the processes including test cases.  These test cases can be assigned to a test plan and executed.  When the project passes the go-live the documentation you have created during the implementation project can be copied to a Solution. This is when the Solution is updated with documentation relating to the productive environment.
    From a documentation perspective the Solution will therefore provide all the documentation associated with the productive landscape, including the test cases you have used as a basis for your test documents in the test plan.  When you change a productive business process you can use a maintenance project to check out the documentation from the Solution, change the documentation, and then check in the changed document.
    For Test Cases the same logic applies.  If you need to change a Test Case you can check it out to the maintenance project, create a test plan for the maintenance project and perform the testing.
    The important note is that the Solution should reflect the productive environment and a project should reflect the project environment.  The benefit is control and traceability.
    Regards,
    Rich Labib

  • Can't Send or Quit Mail after upgrade to 10.4.7

    I just upgraded to 10.4.7 today via Archive & install, and while everything else appears to work correctly, I can't Send from Mail, and if I try to Quit after doing that, it hangs and must be Force Quit.
    Permissions are okay, but when I try to Send mail, it appears to go nowhere; there's no error message, no item in the Sent items box, nothing. There's also nothing in the Outbox in ~Library/Mail, and it hasn't been renamed to Delivered. The problem exists for multiple accounts; I can't Send from any of them, and if I send mail to one of the accounts from the web, Mail crashes when it tries to receive it.
    Any help in fixing this would be appreciated.
    Mulder

    Verify disk was fine, so I moved Outbox.mbox to the Desktop and tried relaunching Mail. When I went to check a single mailbox, it crashed, before I even selected the mailbox to check.
    In the meantime, I've lost my menubar items for the Clock and Volume (again), and some of my Preference Panes are not working because the system claims they can't be loaded or that I may be in Safe Mode, which I'm not. If it help, here's the crash report:
    Version: 2.1 (752)
    Build Version: 1
    Project Name: MailViewer
    Source Version: 7520000
    PID: 264
    Thread: 5
    Exception: EXCBADACCESS (0x0001)
    Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000000
    Thread 0:
    0 libSystem.B.dylib 0x9000b268 machmsgtrap + 8
    1 libSystem.B.dylib 0x9000b1bc mach_msg + 60
    2 com.apple.CoreFoundation 0x907dbb78 __CFRunLoopRun + 832
    3 com.apple.CoreFoundation 0x907db47c CFRunLoopRunSpecific + 268
    4 com.apple.HIToolbox 0x931e6740 RunCurrentEventLoopInMode + 264
    5 com.apple.HIToolbox 0x931e5dd4 ReceiveNextEventCommon + 380
    6 com.apple.HIToolbox 0x9322aee4 AcquireNextEventInMode + 72
    7 com.apple.HIToolbox 0x9328ff10 IsUserStillTracking(MenuSelectData*, unsigned char*) + 252
    8 com.apple.HIToolbox 0x9327d748 TrackMenuCommon(MenuSelectData&, unsigned char*) + 756
    9 com.apple.HIToolbox 0x9327b494 MenuSelectCore(MenuData*, Point, double, unsigned long, OpaqueMenuRef**, unsigned short*) + 188
    10 com.apple.HIToolbox 0x9327b054 MenuSelect + 100
    11 com.apple.AppKit 0x936cb434 _NSHandleCarbonMenuEvent + 168
    12 com.apple.AppKit 0x936c8e64 _DPSNextEvent + 1280
    13 com.apple.AppKit 0x936c87a8 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 116
    14 com.apple.AppKit 0x936c4cec -[NSApplication run] + 472
    15 com.apple.AppKit 0x937b587c NSApplicationMain + 452
    16 com.apple.mail 0x000871d8 0x1000 + 549336
    17 com.apple.mail 0x00087080 0x1000 + 548992
    Thread 1:
    0 libSystem.B.dylib 0x900327ac wait4 + 12
    1 com.apple.Foundation 0x9292e448 _waitForTermination + 40
    2 libSystem.B.dylib 0x9002bc28 pthreadbody + 96
    Thread 2:
    0 libSystem.B.dylib 0x9000b268 machmsgtrap + 8
    1 libSystem.B.dylib 0x9000b1bc mach_msg + 60
    2 com.apple.CoreFoundation 0x907dbb78 __CFRunLoopRun + 832
    3 com.apple.CoreFoundation 0x907db47c CFRunLoopRunSpecific + 268
    4 com.apple.Foundation 0x9294f164 -[NSRunLoop runMode:beforeDate:] + 172
    5 com.apple.Foundation 0x9294f09c -[NSRunLoop run] + 76
    6 com.apple.MessageFramework 0x99f24198 +[_NSSocket _runIOThread] + 92
    7 com.apple.Foundation 0x92940194 forkThreadForFunction + 108
    8 libSystem.B.dylib 0x9002bc28 pthreadbody + 96
    Thread 3:
    0 libSystem.B.dylib 0x9001f7ac select + 12
    1 com.apple.CoreFoundation 0x907ee40c __CFSocketManager + 472
    2 libSystem.B.dylib 0x9002bc28 pthreadbody + 96
    Thread 4:
    0 libSystem.B.dylib 0x900551a8 semaphoretimedwait_signaltrap + 8
    1 libSystem.B.dylib 0x90071828 pthreadcond_timedwait_relativenp + 556
    2 ...apple.AddressBook.framework 0x94cb4b84 -[ABMetaDataController workLoop] + 200
    3 com.apple.Foundation 0x92940194 forkThreadForFunction + 108
    4 libSystem.B.dylib 0x9002bc28 pthreadbody + 96
    Thread 5 Crashed:
    0 com.apple.CoreFoundation 0x907bdd84 CFArrayAppendValue + 52
    1 com.apple.MessageFramework 0x99fabaa8 -[POP3FetchStore messagesWereRouted:] + 396
    2 com.apple.MessageFramework 0x99f97310 -[MessageRouter routeQueuedMessages] + 828
    3 libobjc.A.dylib 0x90a431f4 objc_msgSendv + 180
    4 com.apple.Foundation 0x9293bc88 -[NSInvocation invoke] + 944
    5 com.apple.MessageFramework 0x99f16800 -[MonitoredInvocation invoke] + 144
    6 com.apple.MessageFramework 0x99f1667c +[WorkerThread _execute:] + 76
    7 com.apple.Foundation 0x92940194 forkThreadForFunction + 108
    8 libSystem.B.dylib 0x9002bc28 pthreadbody + 96
    Thread 6:
    0 libSystem.B.dylib 0x900551a8 semaphoretimedwait_signaltrap + 8
    1 libSystem.B.dylib 0x90055004 pthreadcondtimedwait + 676
    2 com.apple.Foundation 0x929bf5a0 FCONDITION_WAITTIMEOUT + 144
    3 com.apple.Foundation 0x929bf4bc -[NSConditionLock lockWhenCondition:beforeDate:] + 128
    4 com.apple.MessageFramework 0x99f1fd90 -[InvocationQueue _drainQueue] + 176
    5 com.apple.Foundation 0x92940194 forkThreadForFunction + 108
    6 libSystem.B.dylib 0x9002bc28 pthreadbody + 96
    Thread 5 crashed with PPC Thread State 64:
    srr0: 0x00000000907bdd84 srr1: 0x000000000200f030 vrsave: 0x0000000000000000
    cr: 0x24004228 xer: 0x0000000000000005 lr: 0x00000000907bdd58 ctr: 0x00000000907bdd50
    r0: 0x0000000000402a80 r1: 0x00000000f0080310 r2: 0x00000000a07b9274 r3: 0x0000000000000000
    r4: 0x0000000000000001 r5: 0x0000000000000002 r6: 0x0000000000417938 r7: 0x0000000000000079
    r8: 0x0000000000000079 r9: 0x0000000000000010 r10: 0x0000000000417930 r11: 0x00000000a9f06830
    r12: 0x00000000907bdd50 r13: 0x0000000000000000 r14: 0x0000000000000000 r15: 0x0000000000000000
    r16: 0x0000000000000000 r17: 0x0000000000000000 r18: 0x0000000000000000 r19: 0x0000000000000000
    r20: 0x00000000004a3430 r21: 0x0000000004a90370 r22: 0x00000000a9f16fd4 r23: 0x00000000a9f16fd4
    r24: 0x0000000004a93720 r25: 0x0000000004a446b0 r26: 0x0000000000000000 r27: 0x0000000000491780
    r28: 0x0000000004a80f10 r29: 0x0000000000000000 r30: 0x0000000000000000 r31: 0x00000000907bdd58
    And finally, Console launches two windows when I use it, one fullscreen and the other smaller.
    Ideas? Solutions?
    Mulder

  • Cannot send email from mail after moving to iCloud

    I have just moved to iCloud and now I cannot send email but can still receive email

    Hi Judy,
    Problem solved.
    Go into Mail/Acounts and delete you iCloud account.
    Now add a new account and type in your details for MobileMe/iCloud.
    It should now work. O noticed the default server name is different.
    Hope this helps.
    Yours,
    Charlie

  • Sending mails after running the audit

    Hi,
    Please let me know if there is any standard workflow available for sending mails after running the audit. I want to inform students that they have failed in audit because of such and such subrequirement is not met.
    Regards
    Vinod Kumar

    Hi Vinod,
    If you are on Ehp4 you can use the BRF as a framework to create a custom developed event/action to send out the e-mail. Or you can copy the standard bulk program of audit calculations and create to functionality to send out e-mails after the run.
    There is currently no standard e-mail related to this process. You could check the standard workflow HRIQ_ADM_UG template to retrieve tasks to be copied in your own workflow (example HRIQ_APP1).
    Good luck
    Rob

  • Can't create Test package

    Hello, After updating up to 22 version new problem has apeared in Test management. I can't create test package in newly created Test Plan. There are disabled buttons like a "create package" and "change package" on the "Test package management" screan. I try to make it with SAP_ALL authorisations.

    Try using this authorization SAP_SOL_PROJ_ADMIN_ALL
    some authorizsations are not included in the SAP_ALL
    hope it helps.

  • How to trigger an E-mail after saving a Case

    Dear all,
    We need to trigger an action to send an E-mail after creation and saving a Case in EP.
    Please help me how could we configure this in the system.
    Your suggestions will be highly appreciated.
    Best wishes
    Raghu ram

    Hi Raghu,
    By using he action profile you can trigger the email once you save the transaction.
    We have processing types in action profile,
    1.Immediate
    2.Recurring
    3.After saving
    In ur case you can after saving the document.
    and assign the action profile to the transcation type.
    Regards
    Chandramohan

Maybe you are looking for