Send an output with dispath time 3, from an external report.

Hi,
It would be very appreciated if someone could help us with the following question:
   We have an output message in a shipment which print a form.
   This output is defined with dispatch time 3 Send with application own transaction.
   Then we have the following doubt:
       We need to create a report which the user can use for:
         1. Re-send the output (we mean print the form again) if it was already
sent    (Status = Successfully processed)
               2. Send the output (we mean print the form first time) if it has not been sent yet (Status = Not processed)
     Then we had thought to do a submit to RSNAST00 program, with the Send again checkbox marked for the case 1, and with this flag empty for the case 2.
     But we have seen that this program only works with output are defined with dispatch time 1 or 2. So we think that it would not work in our case.
Could you help us with this, please? Do you know other program or other way to do it?
Thanks in advance.

No one knows?

Similar Messages

Process the output with dispatch time 3

Dear experts!
Thank you for your attention!
I ues output type BA00 to print order confirmation and set the dispatch time 3
after i save the order, where can i process the output?
as in delivery output, we can use VL71 to process outbound delivery.
which t-code could i use to process the order output with dispatch time 3 ???
Best regard!
Tangdark

is there anyone can help???
please~~~

How I can set up the DynDns inside the Time capsule, or only with the Time capsule I have external access from a PC for ex.?

How I can set up the DynDns inside the Time capsule, or only with the Time capsule I have external access from a PC for ex.?

MobileMe service is finished.. to get remote access to the Mac or TC you use iCloud account.. but that is for files.. not to access web cams.
Without dyndns client in the TC, you can perhaps run dyndns on the computer or video recorder..many of these will have clients built into them.
Even better get a static Public IP from your ISP.. that is the correct professional way to do it.
Or you can use whatever broadband modem you have and remove the TC as the main router.. simply bridge it. Use your adsl router for connection. Almost all adsl have built in dyndns.
Sorry your language is very hard to follow.. and I am sure you are finding my answers similarly difficult.
Basically the TC is about the hardest device to setup because it is lacking important networking functions.
Get a vpn router and use vpn connection is far superior to any other method. But you cannot do it with TC.

Two signals on two outputs with specific time interval

I cant manage with following:
Have NI-6251 card. Trying to sent two step-signals on two outputs with
specific time interval, say 1 to 10 ms with 1us accuracy.
How can I start?
Thanks!

Hi Anonymous,
What do you mean by step-signals? Do you mean a signal that steps up the voltage over time, a step function signal that is zero until a certain time then goes to 1, or a pulse train?
In the meantime you can find examples for getting started in the NI Example Finder by selecting Help » Find Examples
When that opens you can limit the examples to ones that are compatible with your hardware. In the bottom left corner select your hardware and check the Limit results to hardware box.
Browse to Hardware Input and Output » DAQmx » Digital Generation or Generating Digital Pulses.
Best Regards,
Bryan H.

I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?

I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?
I have a 2012 mac book pro can I use that to connect with firewire and load osx that way? and how woudl I do that?
Thanks so much!

To what password are you referring? Do you mean your user account's admin password? Or do you mean the master password for File Vault or do you mean a Firmware Password?
For an admin password:
Forgot Your Account Password
For Snow Leopard and earlier
     Mac OS X 10.6- If you forget your administrator password
For Lion/Mountain Lion
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see Reset a Mac OS X 10.7 Lion Password and
     OS X Lion- Apple ID can be used to reset your user account password.
If you cannot do the above then try this:
1. Boot to Safe Mode by restarting and after the chime press and hold down the COMMAND-S keys until a black screen with white type appears.
2. At the prompt, type the following commands pressing return after each command line:
     /sbin/fsck -yf
     If you do not receive a "Filesystem OK" message then repeat this command until
     you do. If after seven tries you still do not receive a "Filesystem OK" message,
     then the system is corrupted and needs to be reinstalled.
     mount -uw /
     cd /private/var/db/netinfo
     mv local.nidb local.old
     rm ../.AppleSetupDone
     shutdown -r now
The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
How to reset the OS X password without a startup CD:
Reboot into Single-user Mode. Enter the following and press RETURN after each command line
   1. Type fsck -fy
   2. Type mount -uw /
   3. Type passwd <username>
I have never tried this method myself.

How do I move data on time machine from one external hard drive to another

How do I move data on time machine from one external hard drive to another?

Although the documentation says you can copy Time Machine backups in the Finder, it's very slow and sometimes doesn't work at all.
Launch Disk Utility, open the built-in help, and search for the term "Duplicate." Follow the instructions. Turn Time Machine OFF in its preference pane while copying the volume.

Send the output/response in CDATA format from OSB

Hi,
I want to send the output in CDATA format from OSB as below.
<DataSet><![CDATA[<Data>
<QueryRes>
<tagA>anil kumar</tagA>
<tagB>Telesales Lead</tagB>
</QueryRes>
</Data>]]></DataSet>
Request your help to acieve the same.

Hi,
I want to send the output in CDATA format from OSB as below.
<DataSet><![CDATA[<Data>
<QueryRes>
<tagA>anil kumar</tagA>
<tagB>Telesales Lead</tagB>
</QueryRes>
</Data>]]></DataSet>
Request your help to acieve the same.

Problems with real-time extraction from generic datasource.

Hello,
I have a real-time extraction from generic datasoruce with numeric field as a delta pointer. I have created an initilization infopackage, delta IP and real-time IP, real-time data transfer process, real-time deamon. The problem is that real-time extraction does not see delta updates. Deamon creates requests in PSA every minute, but there are all empty. When i delete the deamon and shedule not real-time delta infopackage, it loads delta records correctly. Version of BI - 7.0 SP 18.
The second question: a cannot stop real-time deamon. I stop it in RSRDA, but when i try to shedule standart IP, i get an error, that deamon is still running. So i have to delete it and recreate.
And the 3rd question, theoretical. What real-time extraction is necessary for? As i understand, i can create a process chain that will be sheduled every 1 (5, 10, ...) minute. What are advantages of real-time extraction rather such variant?
Thanks.

Hi,
1.Note 1113610 - P17:SDL:PC:RDA:Daemon runs: Do not start delta/init IPackage
Summary
Symptom
When a daemon runs or is scheduled, you may not start a 'normal' delta/init InfoPackage.
Other terms
RDA, real-time data acquisition, daemon, InfoPackage, scheduler
Reason and Prerequisites
This problem is caused by a program error.
Solution
SAP NetWeaver 7.0 BI
Import Support Package 17 for SAP NetWeaver 7.0 BI (BI Patch 17 or SAPKW70017) into your BI system. The Support Package is available when Note 1106569 "SAPBINews BI7.0 Support Package 17", which describes this Support Package in more detail, is released for customers.
**********you can apply the correction instructions provided in the note
2.i refered closing of the request in the target i.e DSO not psa.
3. Note 1000157 - RDA daemon does not get data from delta queue
Summary
Symptom
You use Real-time Data Acquisition (RDA) to load data from an SAP source system. After several hours or days, the system no longer reads the data from the delta queue. In the RDA monitor, you can see that the InfoPackage has been executed, however the data transfer process (DTP) has not been executed for a long time. In transaction RSA7 in the source system, you can see that there is already data in the delta queue.
Cheers,
swapna.G

My iphoto library disappeared. i am trying to restore my library from time machine -- from an external drive -- but everytime it tries to copy my library it tells me it can't do it because i don't have access to my iphoto library??!!! help!!

My iphoto library inexplicably disappeared! i am panicked but i do back up by time machine to an external drive and also to JustCloud. I am trying to restore my iphoto library from a back up on feb 28, 2014 and it says it's copying but then gives me a message that it can't do it because i "don't have authorization to access iphoto library"?! what does this mean? i really want to get my library back on my mac. Also if anyone knows why this happened or where my photos might be on my computer, i'd appreciate help with that, too.

Thank you Terence for your help. I was able to restore my backup from my time machine ext drive to a new 1tb seagate ext drive. so i felt sort of ok. but yesterday that older ext drive i used for time machine wouldn't open! i called applecare and they trouble shooted with me and said it's probably a goner and data is probably corrupted. it's only a few years old and i'm very careful with it. my husband accidentally dropped my new drive last night -- i know, unbelievable, i was SO upset, poor guy -- but I'm so stressed with all of this. i have 10 years of photos and videos. so now i only have the one newer drive with a backup. i have to buy another one today to backup again so i at least have two backups. i tried to delete a ton of files last night to free up the 30 gb of space i need to get my full library back on my mac. i have 90gb free and deleted 7 years worth of photos i had on picasa that were in my "pictures" folder and also a ton or random photos and videos i had in that same pictures folder and thought that would give me the 30 gb but it hardly freed up any space at all! do you know why that is? all of this stuff is really a pain and really stressful. thank god i did have a backup in the first place but now i am panicked the one i have left will somehow crash. especially after my husband dropped the drive lastnight! it didn't fall far and fell onto a wood floor and seems fine, but after my older ext drive crashed yesterday -- and i lost my entire iphoto library a fewweeks ago off my mac -- i feel cursed. any answers you have would be great. thank you.

Can someone help with moving iTunes & iPhoto from a external harddrive to my new computer?

I got my new computer 3 days ago. I'm loving it so far. My question is...I have an external harddrive that I was using as my backup for my old computer. It was running OS X 10.4 My new computer is 10.8.2. I have no idea how to get the info for iTunes or iPhoto off of my external drive. I've never had to do that before so I'm a little lost.
Thank you for your time.

Migrating from an older Mac OS to a newer one is usually smooth (not vice-versa, there may be problems). Depending on the app used for backup, you may use it in the reverse order (you used to to backup, it must have a restore function).
Alternatively, you may simply copy the iTunes and iPhoto folders into ~/Users/logged in user/Library/Music and ..../Pictures, respectively.
You may also continue to use the folders on the external drive by pressing Option/Alt key upon starting iPhoto and iTunes. You can do that any time you wish to keep these folders in another location than the default one. See screenshots below.
If not clear, please come back with details.

Trouble with installing 10.5 from an external firewire drive

I have a family pack of 10.5 and installed it just fine on my macbook. But, I'm having trouble getting my imac DVD player to read the DVD. It just spins and spits it out, and spins and spits it out. The imac is not covered under applecare so spending money to get the DVD drive fixed (which I barely use) is not something I want to do right now.
Anyway, I followed instructions on a this website to install 10.5 from an external firewire drive. (http://iuseapple.com/blog/apple-how-to/advanced-os-x/2007/10/29/how-to-install-l eopard-from-external-firewire-hard-drive/)
But I get stuck and am not able to actually get my imac to boot from the installer. Basically, I am able to use disk utility to create a copy of the disk image on my macbook. That resulting file ends in ".cdr" and it mounts when I double click it.
And I partitioned my firewire hard drive without problems.
I think I'm messing up when it comes to doing the restore. If I try to drag the .dmg mounted file in to the "source" it doesn't work (is greyed out). If I try to drag the mounted .dmg there than it works, but I get an error when I click "restore" (something about scans and images not being found). I tried physically copying the .dmg file onto the partition, but then when I plugged the HD into my imac, I wasn't able to get the imac to boot from the installer.
What am I doing wrong? If someone could walk me through these last steps I'd appreciate it!

Okay I finally got around to creating the bootable disk image of 10.5 using Carbon Copy Cloner. Still my iMac is not booting from the firewire drive!
Here's a recap of everything I've tried. I'm at a complete loss now!
- I partitioned the HD into 2 partitions-- a 10gig one for the 10.5 install, the then the rest for Time Machine. I make the partition in Disk Utility on my MacBook.
- I've partitioned the drive a few times-- always partitioning it in APM format (b/c it needs to boot my non-intel iMac).
- I've created the disk image using "restore" in disk utility. I've again tried this a few times.
- I am able to boot my MacBook from the disk image I create! So I know the FW drive is able to be used to boot from!
- Here's what I've tried in terms of getting the iMac to boot from the FW drive. It always just boots to my internal drive instead. Sometimes I briefly see a folder and question mark. I've tried all 3 FW ports. I've selected the install partition at start up in preferences. I've also held down the option key at start up (only my internal drive shows) and I've held down command-option-shift-delete and again I get the question mark and it boots to my internal drive.
- And I installed Carbon Copy Cloner and made the disk image that way on my macbook. Still, I tried everything and the iMac is not able to boot from the firewire drive!
Since my DVD drive is broken, this is the only way for me to install 10.5! Help!

Prores 422 Output with 4 Audio Channels from Premier

Hi
I am outputting a television project and need to deliver a Prores 422 (HQ) video file with 4 channels of audio.
Left Mix
Right Mix
Left M&E
Right M&E
My project has 4 tracks of audio but the export settings dialogue box only gives me the following options
single track
2 mono tracks
1 stero pair
What am I missing here.
Is this a function that can achieved from Premiere Pro?
Thanks in advance.

Hi CheshireSmile24,
This article should help you: http://strypesinpost.com/2012/11/exporting-multichannel-quicktimes-in-premiere-pro/
Thanks,
Kevin

Analag/Digital Output with Delay/timed loop

Hi all,
I am trying to execute the following sequence (in the attached picture).
I am using 3 digitat output ports and 2 analog output ports.
My first question is, how mayI use an array to alternate between the digital channels, in the appropriate order?
also, how can I make an execution last for a certain amount of time, before stoping, then continuing to the next objective int he process ?
Lastly, I have trouble introductin gboth analog and digital output into the same execution.
Any help is realyl helpful,
Thank you !
Attachments:
photo.JPG ‏103 KB

Hi taov,
i am using a daq6009, and the picture i uploaded shows the pins that I want to output signal from and the duration fo time i would like it to last.
as of now I have been practiving by powering just one digital port, to turn on for a a few seconds then turn off at the end. Though my Vi does not turn off the digital channel at the end of the duration I specify. And I'm not including the analog output in my code.
Attachments:
6secLEDDIO.vi ‏33 KB

What is the procedure to send an email with an electronic signature from a Mac?

Is ther a certificate available within my Mac?
If yes, how do I get it?
Thank you!
AlainQc

You can get an email certificate here: http://www.comodo.com/home/email-security/free-email-certificate.php
Follow the instructions on how to install it in the Mail app.
Once installed when you send an email there will be 2 new icons on the right side of the mail under the subject that look like this.
If you click the icon on the right your mail will be signed and it will show so in the recieved email
If the person that you are exchanging email with also has a certificate and just sends you 1 signed email, you will then be able to use the left icon which will encrypt the email between the 2 users.
Hope that this helped.

Reusing Time Machine from an external hard drive

Since now I've read a lot of discussion to solve this issue but I cannot understand how to proceed.
My situation is the following. I've replaced my old HDD with a SSD. I performed a clean install of ML 10.8.3 without the support of Migration Assistant. Now, I would like to reuse my extarnal drive without erasing my old backups. In other words, I would like to inherit those backups and continue to use my exteranl drive.
I've found a very good guide for this. In particular, I've read these two FAQs:
http://pondini.org/TM/B5.html
http://pondini.org/TM/B6.html
They are mutual exclusive, I think. If the first one works, you are ok. On the contrary you can follow the second one.
I have two questions about those FAQs.
Concerning the first (B5), when will the popup appear?
Based on my situation, if the popup won't appear, what type of box (B6) do I have to follow? I suppose the pink one but I'm not so sure.
Thank you in advance.

Time machine works great for the file you accidentally delete or modify even if you need to go back months and months. There are better solutions when you really just need to clone your existing system like CCC or Superduper. A clone is more flexible when it comes to getting your stuff. The only downside is you will lose the multiple copies time machine keeps. The upside is you know exactly what's on it and you can boot from it if needed. The file structure is definately more stable on a clone.
A time machine is OK for what you're doing. I just think a clone is better. The choice is yours.

Send an output with dispath time 3, from an external report.

Similar Messages

Maybe you are looking for