Send and reactive ByteArray in AS2

Can anybody help me how to send and reactive the ByteArray from flash to server through port and XML socket ?

This discussion area is for ActionScript 3.0.
For AS1 and AS2 use the following link:
http://forums.adobe.com/community/flash/flash_actionscript

Similar Messages

AS2 Sender and receiver adapter.

Hi All,
I have to develop a scenario where i have to send/receive some GS1 messages to/from our trading partner using AS2 adapters. I have gone through some of the links and blogs realted to as2 adapters but still have some doubts. Request you to help me in understanding those:
1) In receiver AS2 adapter, i am using HTTPS transport protocol and in that case i have to mention some entries like Server certificate and private key authentication under "SSL certificates". So, just wanted to confirm that do i get these certificates from out trading partner and then i have to deploy this on PI server?? If yes then whats the procedure for the same??
2) In sender AS2 adapter, metioning only unique AS2ID (provided by our trading partner) under party identification will result into a communication with our trading partner??or do i need to do something else from my end also??
I am very new to AS2 adapter concepts, so please help me..
Thanks
Amit

Hi Amit,
Check the below answers
Q) In receiver AS2 adapter, i am using HTTPS transport protocol and in that case i have to mention some entries like Server certificate and private key authentication under "SSL certificates". So, just wanted to confirm that do i get these certificates from out trading partner and then i have to deploy this on PI server?? If yes then whats the procedure for the same??
A). Yes you need to maintain the Server certificate and private key authentication, generally certificate and SSL certificates are different, but some customers uses the same certificate for SSL also. after you receive the certificate from the customer BASIS people will deploy this certificate in NWA and provide you the path, that path you need to give.
Q) In sender AS2 adapter, metioning only unique AS2ID (provided by our trading partner) under party identification will result into a communication with our trading partner??or do i need to do something else from my end also??
A). AS2ID we mention only at Party.
Q). I guess, we usually have message subject as "*" in sender AS2 adapters.
A). Generally we can use '' so that it can take any message subject data, if your customer using some subject line always then we can use that subject instead of '', but once they changed the subject line it doesn't handle that message.
Q). But one more thing , i am not sure only specifying WAN number ie AS2ID and message subject(as suggested), will setup a communication between a trading partner and XI system??
A). VAN (Value Added Network) is like our network, but they provide the extra security. Instead of Customer details we can give the VAN details, here no customer details are required and there is no other communication required to the partner. Once we send data to the VAN, then VAN sends that data to customer.
Check this link for more info
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d095b2df-9fa3-2d10-568b-d12d99828c33?quicklink=index&overridelayout=true
Regards,
Ramesh

Send and Receive ACK 997 over AS2

Hi,
I have AS2/EDI setup in place and is working fine. The only thing remaining is sending and receiving Ack 997. How can I do that? What is the quickest way of doing it?
Please help. I need it urgently. I'm sure there must be some quick way of doing the same.
Thanks.

Hi Dipti,
If you have setup ready with parties then you need to add agreement
and in the agreement configure the acknowledgements section.
Go through following articles:
BizTalk Server EDI Scenario: Send an X12 Message and Receive an Acknowledgement
BizTalk Server EDI Scenario: Send an X12 Message Over AS2 and Receive an
Asynchronous MDN
If you not have parties added then first do that and then create agreement between them:
Create Trading Partners and Business Profiles
Create Trading Partner Agreement
Maheshkumar S Tiwari|User Page|Blog|BizTalk
Server : How Map Works on Port Level

Cannot send or receive email from the cloud. all updates are competed and everything else is working fine on MAC. iPad sends and receives fine. any ideas.

On Imac I am not able to send or receive messages. All software is updated. My iPad that uses the same email address and the Cloud, sends and receives just fine. It is not "the colored" thing that is spinning but the little black and white circular icn that is spinning away. My other email address is functioning fine. It is merely the ICLOUD based email that is acting up. Any ideas?

First try deleting the account and reinstall it.

Trouble send and receiving messages and trouble calling people or receiving phone calls

Hello everyone, I bought a Blackberry Q5 one year ago and has worked perfectly since but on christmas day I had was struggling to send message to people I thought nothing of it since it was christmas and people would be wishing there families and friends a merry christmas. So i just carried on as usual not aware that the problem was much worse then i thought, since then I have tried time and time again to try text people and call them but nothing would happen.
The Problems I am experiencing,
Everytime I try sending a message it fails and times out after a while doesn't matter whom they are being sent to it's the same story no matter who I send them to, and then of course when i try calling someone the phone goes to the calling screen but doesn't make a sound for atleast 10 seconds then a message pops up saying "Call Failure, The call could not be connected. Please try again later". This message appears even when I ring '789' which is the number to find out what my balance is on my contract.
At first I thought it was the Sim what was cauing the problems but when i swapped it into another Virgin phone i received quite an alarming amount of messages what would not come through on my phone, this is when i realised I am not just struggling to send messages but to receive them as well. I have scoured the internet for possible answers but nothing has worked, so far I have tried manually scanning for available networks and selecting the correct one which did not change the problem this didn't make things better nor did it make things worse.
I have also tried changing the data services while roaming settings which again did not make any differences, I have tried changing network mode no changes again, turning the mobile network off all together and then turning it back on after 5 minutes no success there either. I have even reset the phone back to factory setting to try and fix the problem, but no, the problem still will not go away.
Please if there is anyone out there who has any ideas on how to fix what is happening to my phone please do give me your advice, at this moment I really need a miracle to come around at the next corner.

Hi rhupa!
Here is an article that will help you troubleshoot this issue:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Mail Connection Doctor shows one or more red dots in the account Status column
Check your Incoming IMAP or POP and Outgoing SMTP email account settings
Use Apple's online Mail Setup Assistant to discover what the correct settings should be for both your Incoming (IMAP or POP) and Outgoing SMTP email servers. If your email service provider is not listed in the Mail Setup Assistant, visit your email service provider's website or contact their support staff to get the correct settings. You can use this "cheat sheet" when asking your email service provider about the settings you need.
After you have the correct email service provider settings, make sure Mail is configured properly.
Click here if your Incoming and Outgoing email account settings are correct, but the issue persists
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Not receiving texts from iPhone contacts when I'm not connected to wifi or cell data. I can't send and receive regular SMS texts with non iMessage users but iMessage users message are not being converted to text when I don't have internet connect

I can send and receive to any non iPhone user. I can send a message as a text to an iPhone user but if I'm not connected to cellular data or wifi I do not receive messages from iPhone contacts. From what I understand these message should automatically send to me as texts instead of iMessages but since the update it's not functioning properly. Please help. I've tried turning iMessage off and I still don't receive the messages until after I reconnect to wifi.

I have the same problem! Before the upgrade, if I wasn't connected to the internet, any messages sent to me from an iphone would convert automatically to a text message. I have payg tarriff, so I turn cell data off, as it costs too much to use it. I have wifi at home and work, but if I'm out and about, I don't receive texts from iphone users until I'm on wifi. I get them ok from non iphone users. There was never any problem until ios7

On previous iPhones you could go to settings and block the the actual text message from pooping up. Only the sender would show up. On the i4gs the sender and message show up. This is a major flaw as far as privacy. There are no options with in settings to

On previous iPhones you could go to settings and block the the actual text message from pooping up. Only the sender would show up. On the i4gs the sender and message show up. This is a major flaw as far as privacy. There are no options with in settings to stop this from happening. PLEASE TELL ME IM WRONG ???

YOU ARE WRONG.
Go to Settings > Notifications > Messages. You can turn Notifcation Center off for Messages, or select None for the alert style, and turn Show Preview off, and view in Lock Screen on or off.

TS2755 I have 3 phones on one Icloud account. It has been this way for over a year with no issues. After and update on of the lines started getting text messages from all 3 phones. We fixed the send and receive and it was fixed. It is doing it again.

I have 3 phones on one Icloud account. They have been this way for over a year. After an update last week one of the phones started getting messages for all of the other lines. We fixed this under the send and receive under settings. It was fine for a few days. Suddenly it started happening again. Yesterday after two hours on the phone I changed my apple id and it is still happening. Before that Verizon had told me to turn off my imessage when that happened I could not get any texts at all from other Iphone users.

Make 3 different iCloud accounts and use ONLY for iMessage. That will permanently fix your issue.

When I access my google e-mail account on the I-pad my inbox has at least 6 e-mails with no sender and no subject (absent via I-phone, Mac or PC) I cannot delete them as they cannot be selected- how do I stop them and clear the ones there now?

When I access my google e-mail account on the I-pad my inbox has at least 6 e-mails with no sender and no subject (absent via I-phone, Mac or PC) I cannot delete them as they cannot be selected- how do I stop them and clear the ones there now?

Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
If that doesn't work then try closing the Mail app completely : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Problem with Send and Receive Emal In SAP System

Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PM

Hi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael

Problem with sending and receiving e-mail through exchange [GMail]

Hello I have problem with sending and receiving e-mail.
all is well set, username and password are correct, the server set m.google.com. verification of data is about like stepping into a post and want to check the post office gives me an error message: Can not Get Mail. The connection to the server has failed
I have this problem on my two iPhone

http://www.zdnet.com/google-drops-exchange-activesync-support-for-free-email-acc ounts-7000008836/

Is there a software in which I can hook up my iPhone 4s to my computer and send and receive text messages and calls (via headset) through my computer?

Is there a software in which I can hook up my iPhone 4s to my computer and send and receive text messages and calls (via headset) through my computer? Whether it's free or cost money, can someone please give me a name of a program or software that allows me to do this? I can't seem to find anything like this for the iPhone.

No.

I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this?

I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this? I have shut down my phone, but still no luck!

iMessage and FaceTime went down yesterday for some people. Mine is still down. My iMessage is saying the same thing about being activated. Sounds like you are still down too. Ignore the status page that says everything is fine - it lies.

Need to use only one sender and receiver communication channel.

Hello Experts.
I have a scenario where in I have to use only one sender and receiver communication channel to push files from different source directories to different receiver directories.
For Eg;
Sender
D://dir1/file1 --->                  E://dir1/File1
F://dir2/file2 ---->                 G://dir2/file2
H://dir3/file3----->                 I://dir3/file3.
Can this be achieved by using pass through scenario?
Please let me know if the requirement is not clear.
Thanks in advance.
Advit Ramesh

Hi Advit,
I think it is possible. You have to use the Advanced Selection for Source file in the sender channel to define multiple files to be picked up. Also, the Dynamic configuration must also be enabled and used in the mapping so you can manipulate the target directory and target file name based on your source files.
For Polling from multiple directories:
http://wiki.scn.sap.com/wiki/display/XI/File+Sender+Adapter+-+Polling+Multiple+Directories
Dynamic Configuration:
Dynamic file name and directory in Receiver File Adapter - summary of possibilities - Process Integration - SCN Wiki

Send and Recieve Error code " Receiving reported error (0x80004005): The operation failed"

This is what is happening after installing 2010 on to a computer that was running 2007 Outlook. Currently using Office 365 so everything is on the cloud but when the user sends one or two emails the error on the bottom of outlook says send and receive
error. Then a pop up dialog box comes up with the following error
Receiving reported error (0x80004005): The operation failed
Does anyone know how to fix this
Nexusxox

Hi,
Glad to know that you have found the solution.
Thanks for your generous sharing. Have a nice day : )
Thanks
Mavis
Mavis Huang
TechNet Community Support

Send and reactive ByteArray in AS2

Similar Messages

Maybe you are looking for