Send and receive connector

Hi Everyone, I have 2 send connectors and 4 receive connectors configured on exchange server 2007.How do i know which send or receive connector i am using for my exchange 2007.I am doing the transition to exchange server 2013. If i create a new send
and receive connector in exchange 2013 without looking back to exchange 2007 will i face any issue.Do guide me how to create it in exchange 2013.

Hi Risingflight,
According to your description, I found that we want to create send and receive connectors for the new Exchange 2013 server with the same settings as the old Exchange 2007 server.
I suggest collecting the settings on EMC from Exchange 2007 server, and doing the same settings on Exchange 2013 server.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Similar Messages

How to correctly configure send and receive connectors for SBS2011 exchange to connect to EOP

Hello SBS fans,
we have a customer with SBS2011 and exchange. The server email is setup for Exchange Online Protection.
It passes the Remote Connectivity Analyzer for inbound and outbound email. It shows a warning for the spf, saying it cannot find the spf record, BUT MXtool box passes everything associated with their domain name, including the spf record.
They are now getting some bounced email from yahoo servers, referencing this ip
65.55.169.249, which is a valid Microsoft ip.
I checked the bounce back email header carefully, and found a reference to an internal ip, 192.168.11.14, which just happens to be the ip of the user's desk PC!! - NOT the local addr of the sbs2011 server (which should not be there anyway)
I will guess that there is an incorrect setting in one or both of the hub transports? There is a correct smart host connector.
I am no longer sure about the other connectors!
Any ideas on this?
ewholz
Network and Server Installs

Hi,
à
It shows a warning for the spf, saying it cannot find the spf record
Would you please let me know the complete warning message that you can get? Meanwhile, would you please let
me know how long ago you add the SPF record? Be
more than 72 hours?
Please also refer to following article and check if can help you.
Configuring
Exchange 2007 Hub Transport role to receive Internet mail
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Unable to send and receive email for external domain

Hi,
I just installed Exchange Server on my 2K8 domain controller. I have set up the send connector and made necessary changes to the receive connector as well. I have updated the DNS records as well on my domain registrar. I can access OWA from outside my companies
network and is able to send and receive emails for my domain but unable to send or receive emails to any other domain. I have checked the delivery report and it says that the message has been queued on the server.
I also did nslookup. Results mentioned below:
C:\Users\Administrator>nslookup www.google.com
Server: localhost
Address: ::1
Non-authoritative answer:
Name:    www.google.com
Addresses: 2404:6800:4009:802::1014
          74.125.236.145
          74.125.236.148
          74.125.236.146
          74.125.236.144
          74.125.236.147
C:\Users\Administrator>nslookup www.microsoft.com
Server: localhost
Address: ::1
DNS request timed out.
    timeout was 2 seconds.
DNS request timed out.
    timeout was 2 seconds.
*** Request to localhost timed-out
Any help would be much appreciated!

Hi hg01,
According to your description, I notice that you installed Exchange server on a DC.
It is not recommended to install Exchange server on a DC. I suggest install Exchange server on a member server. More details to see:
Installing Exchange on a domain controller is not recommended
http://technet.microsoft.com/en-us/library/ms.exch.setupreadiness.warninginstallexchangerolesondomaincontroller(v=exchg.150).aspx
About your issue, cannot send and receive externally, I suggest make sure the DNS can be resolved first.
Then, check whether Outlook Anywhere has been enabled. If not, please enable it on both Exchange server and Outlook client side.
Last, try to configure both Send Connector and Receive Connector.
More detailed error message will be helpful for the further troubleshooting.
Thanks

Unable to receive e-mails & Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.

Everything good until yesterday, Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.
I am connected so I don't know why it is "offline". I am able to "send emails" but not receiving.

Hi,
What’s your Outlook account? Exchange account or some other Internet email accounts?
This issue is usually happened when the Microsoft Outlook Hotmail Connector account is syncing changes to a folder and cannot find the folder in the Outlook client. Please try the following KB to check it:
http://support.microsoft.com/kb/2231628
If the issue persists, please create a new Outlook profile and add the email account to have a try:
http://support.microsoft.com/kb/829918
Regards,
Winnie Liang
TechNet Community Support

Send and Receive to internet outside is not working

Hello everyone,
I have just launched my own exchange 2013 infrastructure on server 2012 R2. everything works within the organization. however, send or receive emails to outside on the internet is not working. here is the info and what i have done so far:
My organization domain is .local,
I have created accepted domains as mail.mydomain.com ( mydomain.com) is registered with powweb.
I created send connector and receive connector is already there by default on exchange 2013
send connector is MX record type. I also setup two mx records on my external DNS as follow
mail - IP address of my router ( then port forwarded port 25 to my exchange IP from router)
@ - mail.mydomain.com
* - Mail.mydomain.com
CAN anyone plz help me what am i doing wrong ... i have been working on this till 4 am and its frustrating me
and finally i got this message from my end when i send to outside email:
Diagnostic
information for administrators:
Generating server: EX2013-MBX-CAS.MYDOMAIN.local Receiving server: hotmail.com (65.54.188.72)
[email protected] Remote
Server at hotmail.com (65.54.188.72) returned '400 4.4.7 Message delayed' 7/3/2014 11:21:39 AM - Remote Server at hotmail.com (65.54.188.72) returned '441 4.4.1 Error encountered while communicating with primary target IP address: "Failed to connect.
Winsock error code: 10060, Win32 error code: 10060." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 65.54.188.72:25'
Original message headers:
Received: from EX2013-MBX-CAS.MYDOMAIN.local (MyrouterIP)
by EX2013-MBX-CAS.mydomain.local (MY PRIVATE EXCHANGE IP) with Microsoft SMTP Server (TLS) id 15.0.847.32; Thu, 3 Jul 2014 03:08:05 -0500 Received: from EX2013-MBX-CAS.mydomain.local ([::1]) by EX2013-MBX-CAS.mydomain.local ([::1]) with mapi
id 15.00.0847.030; Thu, 3 Jul 2014 03:08:05 -0500 From: Riaz Ansary <[email protected]>
To: "[email protected]"
<[email protected]> Subject:
Good Morning Thread-Topic: Good Morning Thread-Index: Ac+WleelD8gwEYWTQdKbx6+rBbFpXw== Date: Thu, 3 Jul 2014 08:08:05 +0000 Message-ID: <[email protected]al>
Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [192.168.0.150] Content-Type: multipart/alternative;             boundary="_000_80e53235c8a44adca31979bdeb206a7bEX2013MBXCASCYNASOLUTIO_"
MIME-Version: 1.0

Telnet to hotmail failed here is the result
Microsoft Telnet> o mx1.hotmail.com 25
Connecting To mx1.hotmail.com...Could not open connection to the host, on port 2
5: Connect failed
here is the SMTP test i did for incoming
Unable to connect after 15 seconds.
Test
Result
SMTP Connect
Failed To Connect
More
Info
Session Transcript:
Connecting to MyROutherIPAddress
7/3/2014 12:11:00 PM Connection attempt #1 - Unable to connect after 15 seconds. [15.01 sec]
MXTB-PWS3v2 15007ms
reverse lookup
blacklist
port scan
subnet tool
Reported by mxtoolbox.com on 7/3/2014 at 12:10:45 PM, just for you.  (History)  Transcript
mx:cynasolutions.com   Find Problems
mx
Register for a Free MxToolBox Account for access to more features.
Pref
Hostname
IP Address
TTL
30
mail.mydomain.com
MYROUTERIP
60 min
Blacklist Check      SMTP
Test
dns lookup
dns check
whois lookup
spf lookup
Reported by ns2.powweb.com on 7/3/2014 at 12:10:25 PM (UTC -5), just for you.  (History)  Transcript

I need send and receive emails for edge server 2010

i have exchnage 2010 in our orgnization now working fine , i can send and receive emails for hub and also we have tmg and fortigate firewall(200B) , already install and configuration edge server(configure edge subscribtion file and edge sync) but still message
sent form hub and also receive form hub , what to do to receive from edge ? please help me i have 3 month search to fix his problem.

Hello,
I recommend you use the Test-EdgeSynchronization cmdlet to check if the subscribed Edge Transport servers have a current and accurate synchronization status. If you have configured EdgeSynchronization successfully, please delete send connector
on Hub transport server.
Please uncheck "anonymous users" on receive connector for Hub server.
Please follow the ExchangeITPro's suggestion to check DNS MX record.
Cara Chen
TechNet Community Support

Send and receive UDP data package based on siemens TC65 module

Everyone:
I am newer for J2ME. I have a TC65 module, I want to get a sending and receiving UDP data package exeample codes running on TC65. who can help me? thanks!

Hi deepspace,
I programmed a demo codes and run it on TC65T, debug trace like :
at^sjra=a:/NetDemo.jar
OK
NetDemo: Constructor
NetDemo: startApp
NetDemo: Profile could not be activated
NetDemo: destroyApp(true)
// below is demo codes, can you help me where error is?
package example.netdemo;
import javax.microedition.midlet.*;
import java.io.*;
import javax.microedition.io.*;
import javax.microedition.io.Datagram;
import javax.microedition.io.DatagramConnection;
public class NetDemo extends MIDlet {
public NetDemo()
System.out.println("NetDemo: Constructor");
public void startApp() throws MIDletStateChangeException
System.out.println("NetDemo: startApp");
try
DatagramConnection conn = (DatagramConnection) Connector.open("datagram://58.185.157.91:12003");
byte[] buffer = new byte[32];
Datagram dgram = conn.newDatagram(buffer, buffer.length);
for (int i = 0; i < 30; i++) {
buffer[i] = (byte)('0' + (i % 10));
conn.send(dgram);
catch (Exception e)
System.out.println("NetDemo: " + e.getMessage());
destroyApp(true);
public void pauseApp() {
System.out.println("NetDemo: pauseApp()");
public void destroyApp(boolean cond) {
System.out.println("NetDemo: destroyApp(" + cond + ")");
notifyDestroyed();
}

Sending and receiving sms problem

Hi,
I try to send and receive message with this command;
MessageConnection conn = (MessageConnection) Connector.open("sms://" + addr);
When I run this command, I meet this error:
java.lang.UnsatisfiedLinkError: isNetworkMonitorActive
     at javax.microedition.io.Connector.isNetworkMonitorActive(Native Method)
     at javax.microedition.io.Connector.<clinit>(Connector.java:142)
     at com.sezo.smsyeni.Sms.sendText(Sms.java:36)
     at com.sezo.smsyeni.Sms.main(Sms.java:24)
I want to send sms over IR with my phone. (Sony Ericsson K500i)
Is it necessary to use any API?
What should I do?
Thanks.

Hi Friends,
I'm new in the J2ME domain. I did try to send SMS from my desktop application to mobile. But at runtime I'm getting the following error:-
++++++++++++++++++++++++++++++++++++++++++
java.lang.UnsatisfiedLinkError: isNetworkMonitorActive
at javax.microedition.io.Connector.isNetworkMonitorActive(Native Method)
at javax.microedition.io.Connector.<clinit>(Connector.java:142)
at MessageSender.main(MessageSender.java:12)
+++++++++++++++++++++++++++++++++++++++++++++++
Please let me know what all setup/configuration/dll are required to resolve the problem. Appreciate your input.
Thanks and Regards,
-AshokM

Cannot send or receive email from the cloud. all updates are competed and everything else is working fine on MAC. iPad sends and receives fine. any ideas.

On Imac I am not able to send or receive messages. All software is updated. My iPad that uses the same email address and the Cloud, sends and receives just fine. It is not "the colored" thing that is spinning but the little black and white circular icn that is spinning away. My other email address is functioning fine. It is merely the ICLOUD based email that is acting up. Any ideas?

First try deleting the account and reinstall it.

Trouble send and receiving messages and trouble calling people or receiving phone calls

Hello everyone, I bought a Blackberry Q5 one year ago and has worked perfectly since but on christmas day I had was struggling to send message to people I thought nothing of it since it was christmas and people would be wishing there families and friends a merry christmas. So i just carried on as usual not aware that the problem was much worse then i thought, since then I have tried time and time again to try text people and call them but nothing would happen.
The Problems I am experiencing,
Everytime I try sending a message it fails and times out after a while doesn't matter whom they are being sent to it's the same story no matter who I send them to, and then of course when i try calling someone the phone goes to the calling screen but doesn't make a sound for atleast 10 seconds then a message pops up saying "Call Failure, The call could not be connected. Please try again later". This message appears even when I ring '789' which is the number to find out what my balance is on my contract.
At first I thought it was the Sim what was cauing the problems but when i swapped it into another Virgin phone i received quite an alarming amount of messages what would not come through on my phone, this is when i realised I am not just struggling to send messages but to receive them as well. I have scoured the internet for possible answers but nothing has worked, so far I have tried manually scanning for available networks and selecting the correct one which did not change the problem this didn't make things better nor did it make things worse.
I have also tried changing the data services while roaming settings which again did not make any differences, I have tried changing network mode no changes again, turning the mobile network off all together and then turning it back on after 5 minutes no success there either. I have even reset the phone back to factory setting to try and fix the problem, but no, the problem still will not go away.
Please if there is anyone out there who has any ideas on how to fix what is happening to my phone please do give me your advice, at this moment I really need a miracle to come around at the next corner.

Hi rhupa!
Here is an article that will help you troubleshoot this issue:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Mail Connection Doctor shows one or more red dots in the account Status column
Check your Incoming IMAP or POP and Outgoing SMTP email account settings
Use Apple's online Mail Setup Assistant to discover what the correct settings should be for both your Incoming (IMAP or POP) and Outgoing SMTP email servers. If your email service provider is not listed in the Mail Setup Assistant, visit your email service provider's website or contact their support staff to get the correct settings. You can use this "cheat sheet" when asking your email service provider about the settings you need.
After you have the correct email service provider settings, make sure Mail is configured properly.
Click here if your Incoming and Outgoing email account settings are correct, but the issue persists
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Not receiving texts from iPhone contacts when I'm not connected to wifi or cell data. I can't send and receive regular SMS texts with non iMessage users but iMessage users message are not being converted to text when I don't have internet connect

I can send and receive to any non iPhone user. I can send a message as a text to an iPhone user but if I'm not connected to cellular data or wifi I do not receive messages from iPhone contacts. From what I understand these message should automatically send to me as texts instead of iMessages but since the update it's not functioning properly. Please help. I've tried turning iMessage off and I still don't receive the messages until after I reconnect to wifi.

I have the same problem! Before the upgrade, if I wasn't connected to the internet, any messages sent to me from an iphone would convert automatically to a text message. I have payg tarriff, so I turn cell data off, as it costs too much to use it. I have wifi at home and work, but if I'm out and about, I don't receive texts from iphone users until I'm on wifi. I get them ok from non iphone users. There was never any problem until ios7

TS2755 I have 3 phones on one Icloud account. It has been this way for over a year with no issues. After and update on of the lines started getting text messages from all 3 phones. We fixed the send and receive and it was fixed. It is doing it again.

I have 3 phones on one Icloud account. They have been this way for over a year. After an update last week one of the phones started getting messages for all of the other lines. We fixed this under the send and receive under settings. It was fine for a few days. Suddenly it started happening again. Yesterday after two hours on the phone I changed my apple id and it is still happening. Before that Verizon had told me to turn off my imessage when that happened I could not get any texts at all from other Iphone users.

Make 3 different iCloud accounts and use ONLY for iMessage. That will permanently fix your issue.

Problem with Send and Receive Emal In SAP System

Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PM

Hi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael

Problem with sending and receiving e-mail through exchange [GMail]

Hello I have problem with sending and receiving e-mail.
all is well set, username and password are correct, the server set m.google.com. verification of data is about like stepping into a post and want to check the post office gives me an error message: Can not Get Mail. The connection to the server has failed
I have this problem on my two iPhone

http://www.zdnet.com/google-drops-exchange-activesync-support-for-free-email-acc ounts-7000008836/

Is there a software in which I can hook up my iPhone 4s to my computer and send and receive text messages and calls (via headset) through my computer?

Is there a software in which I can hook up my iPhone 4s to my computer and send and receive text messages and calls (via headset) through my computer? Whether it's free or cost money, can someone please give me a name of a program or software that allows me to do this? I can't seem to find anything like this for the iPhone.

No.

Send and receive connector

Similar Messages

Maybe you are looking for