Send and receive from Exchange 2010
Hello,I have a doubt about sending and receiving mail from Exchange 2010. I have an Exchange 2010 organization, with antispam product between Exchange and Internet.I have a receive conector in my Exchange. In the Network tab, I have 0.0.0.0 255.255.255.255, and in the permission tabs, I have all checked (Anonymous, the 3 for Exchange and Partners).This way, I can send and receive all mail, from - to my organization. If I connect from outside and try to send mail without identification (telnet and try a dummy email address without any credentials), the antispam server blocks the rely. But if from inside the company I telnet the Exchange server, I can send mail from any non existing account, to any account inside my Exchange Organization.If I uncheck the Anonymous tick in the permission tab, I stop receive mail from outside.What have I...
This topic first appeared in the Spiceworks Community
Hi,
What’s the user impact? If the issue only occur on specific users, I suggest we firstly take the troubleshooting from the client side.
If the issue occurs to all the users, it’s seems the Outlook sync issue with the CAS server, not like a database issue. Do you configure the NLB for the CAS server?
Thanks,
Simon Wu
TechNet Community Support
Similar Messages
-
On my iPad I can only send email and messages to apple products.how can I send and receive from other devices other than Apple?
Vallakat wrote:
On my iPad I can only send email and messages to apple products.
There is a huge difference between sending email and sending messages.
Yes, I believe you when you say you can only send messages to other Apple products. The iPad is not a telephone, and therefore, it cannot text message. It can only iMessage, which means it can send and receive messages to/from other Apple products if they are on WiFi or an iMessage capable cellular network.
Email, however, is a whole different category. I don't really think you can only exchange email with other Apple products only. Make sure you have correctly identified the symptoms. -
My phone only let's me send iMessage from my email, how do I send and receive from my number?
Hi jwol21,
If you are having issues sending iMessages from your phone number, you may want to double check that your phone number and your Apple ID have been linked and that your phone number is listed under Start New Conversations From. You may find the following article helpful:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/ht5538
Regards,
- Brenden -
Copy UM settings and prompts from Exchange 2010 to Exchange Online
When I migrated UM from Exchange 2007 to Exchange 2010, there is a script called "MigrateUMCustomPrompts.ps1"
that would copy over all the customized greeting files.
We are now migrating from Exchange 2010 to Exchange Online and will be using Exchange Online UM. Is there a similar script to copy over the files just like
the on-prem?Sorry, I don't share code examples in most cases because they're generally one-off customer-specific scripts and I'm not in a position to answer lots of follow-up questions about them.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems." -
My husband and I both have iphone 4S's and for some reason he gets my text conversations w/ other people. We share the apple ID and I have my settings set to and from my phone # and email address. He is getting tired of being apart of text messages I am on. How do we remedy this?
Each of you need to have your own apple id's instead of sharing is the best way. But you can go to each phones settings, messages, send and recieve, and down to start new conversation from, and make sure each of you have your own email address with a check mark beside of it not the same address.
-
I usually receive about 9k-10k messages per month. I received my last Twitter mobile notification at ~7am this morning. It's 3:15pm or so and I haven't received any. I restarted my phone, that didn't change anything. I powered off and turned my phone back on, that didn't work either. I pulled the battery and that didn't nothing. I delete messages everyday so they don't stack up.
Thanks for clarifying more, debandrobin!
With that being said, it confirms that the issue is with the Twitter notification settings on their server, not your device. You will need to reach out to Twitter Support http://bit.ly/1qBjTMY for further troubleshooting with this issue. Thanks for reaching out to us here!
AnthonyTa_VZW
Follow us on Twitter @VZWSupport -
Mail.app and push from Exchange 2010
It it correct that mail.app can only pull in emails every X minutes (specified in the dropdown menu) and not receive push messages as iOS devices can?
If so, is it likely to be implemented in 10.7?
ThanksSorry, I don't share code examples in most cases because they're generally one-off customer-specific scripts and I'm not in a position to answer lots of follow-up questions about them.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems." -
I import messages into Thunderbird. I send and receive emails. One of the things I like about Thunderbird is that I can insert (image, link, etc) right where I want to, and I can Attach. But not just a simple attach file. No, I can also click Attach and choose Webpage. A lot of web-based emails are plain, simple, no frills - Attach file and that's it.
So I need to have my client be able to do the same thing I do when sending out emails, Namely sending out emails with an Electronic Press Kit (EPK) attached - which is to say, a webpage (not a pdf in our case). So, I need her to download, install, and use Thunderbird.
Here's the problem and my question. She needs to access, send, and receive from my email account. That would be easy if it was simple attach files - she could just login on the web, go to squirrel mail and bang it out.. Here it is: She needs to be able to import the messages to be able to reply to some messages - she needs access to what I have access to. She needs to use Thunderbird so she can take advantage of the features like insert image with link or attaching a webpage. My question is how will this affect my use? Can 2 people simultaneously and from different locations access and use the same email account or is it a case where her importing the emails would cut me off..Is it an either or thing? Basically, can her and I both import the emails or can they only be imported to one location at a time. Because every time someone sends me an email i get it right there on my Thunderbird application..it's imported to my Thunderbird..I want her and I to be able to do that without affecting each other. I don't want her to start importing to her desktop and then I can no longer import. If she says "point those messages to my computer what will happen to my ability to access them on my computer in the same manner I am currently?I think there is a contradiction in your requirements. You want two people to share an account and you don't want either to interfere with the other.
The short and simple answer is to use IMAP to connect to the mail server. If your current email provider doesn't offer IMAP, find another that does. This is old technology already and it's disgraceful that some email providers haven't yet put it in place.
IMAP means that your messages are stored on the server and both of you will see exactly the same set of messages. And therein lies the contradiction; you will both see changes made by the other so you are inherently interfering with one another.
Caveats: some providers may not permit you both to access the account concurrently, and even if they do, things may become interesting if you both choose to work on the same message simultaneously.
Note that all of this is about email servers and protocols; your choice of Thunderbird as your email client has little bearing on the situation. -
COPA: how to identify which cost element for sender and receiver in IMG
Hi Guru,
I know my cost element for sender and receiver from the settlement document, but where in IMG, i can identify how it settup to use which cost element for my sender - order , which cost element should be used for my reciever profit segment.
Thanks,
KickHi,
Go to KEI1
Select your transfer structure
double click on assignment lines
check the source and value fields to get the mapping.
Regards,
Sridevi
<i><b>Pls. assign points, if useful</b></i> -
How would I import multiple Roadrunner emails each with multiple folders into Apple Mail and continue to use my Roadrunner email to send and receive from within Mail?
Try this.. Click the first in the CC field hold Shift, Click the Second Third, Fouth, Fifth and so on... click right Mouse select add to Contacts.
-
My send and receive list only gives me the option to send and receive from my email and my phone number is greyed out and it won't let's select it. I am currently in a foreign country but it was working a couple days ago here. What do I do?
Do you have another device with that email/Apple ID on it with iMessage activated? If not, you should be able to remove the checkmark for the email address. You cannot remove the Apple ID email address, but you can turn it off by tapping on it and that should remove the checkmark. Once that is gone, you are good to go. It will only use the phone number.
-
I have exchange 2013 server, with database for each department last week we have power problem, servers down
after servers goes on line, i have database with dirty shutdown, cant mount it, then i do eseutil/p, then i mount it, then all users access there mails from outlook 2010 they can send and receive, except one user cant receive new mail to outlook but he can
send mails from outlook (in outlook the folder last update 22april), from owa he receive anew mails and can send,
i try to delete outlook profile and create it again i get folder has not yet been updated
i try to repair exchange database again, but the same problem
i try to move it to another database or another server but move fail
if i use outlook online (remove use cached mode) its receive new mails.
Any help?
ThanksHi,
What’s the user impact? If the issue only occur on specific users, I suggest we firstly take the troubleshooting from the client side.
If the issue occurs to all the users, it’s seems the Outlook sync issue with the CAS server, not like a database issue. Do you configure the NLB for the CAS server?
Thanks,
Simon Wu
TechNet Community Support -
Apple Mail can't send or receive messages from Exchange 2010, Mountain Lion
Over the last several weeks, I have been unable to send or recieve e-mails from Exchange 2010 in a corprate environment. I have deleted and re-added the account several times, and sometimes it will fix the issue. Other times it won't. I have also tried deleting the account, clearing the cache in ~/Library/Mail/V2/EWS*, and then re-adding the account. It resolves the issue temporarily, but then returns to not being able to sync. I've tested it with a number of other users accounts on the same Exchange system, and it's working as expected. OSX is version 10.8.4 with current patches as of 10/7/2013.
The connection doctor shows that the connection to EWS is green. The activity monitor looks like it's updating the folders properly on sync.
Here is the message I get in the logs in high volume when Console logging is turned on:
*** Assertion failure in -[EWSConnection sendMessage:forRequest:], /SourceCache/Message/Message-1508/Message/EWS/EWSConnection.m:555
Received an unexpected error: Error Domain=EWSExchangeWebServicesErrorDomain Code=277 "The operation couldn’t be completed. (EWSExchangeWebServicesErrorDomain error 277.)" UserInfo=0x7fd1c9a97e70 {EWSErrorMessage=The request failed schema validation., NSUnderlyingError=0x7fd1c85106f0 "The operation couldn’t be completed. (SOAPWebServicesErrorDomain error -1000.)"}, response: (null)
0 CoreMessage 0x00007fff86a4a517 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 141
1 CoreMessage 0x00007fff86a4a388 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 215
2 Message 0x00007fff8daa5a8e -[EWSConnection sendMessage:forRequest:] + 762
3 Message 0x00007fff8daaeab3 -[EWSGateway sendMessage:forRequest:] + 69
4 Message 0x00007fff8dac543a -[EWSRequestOperation executeOperation] + 110
5 CoreMessage 0x00007fff86a65b80 -[MonitoredOperation main] + 219
6 Foundation 0x00007fff92475926 -[__NSOperationInternal start] + 684
7 Foundation 0x00007fff9247d0f1 __block_global_6 + 129
8 libdispatch.dylib 0x00007fff87f4af01 _dispatch_call_block_and_release + 15
9 libdispatch.dylib 0x00007fff87f470b6 _dispatch_client_callout + 8
10 libdispatch.dylib 0x00007fff87f481fa _dispatch_worker_thread2 + 304
11 libsystem_c.dylib 0x00007fff9068ad0b _pthread_wqthread + 404
12 libsystem_c.dylib 0x00007fff906751d1 start_wqthread + 13Over the last several weeks, I have been unable to send or recieve e-mails from Exchange 2010 in a corprate environment. I have deleted and re-added the account several times, and sometimes it will fix the issue. Other times it won't. I have also tried deleting the account, clearing the cache in ~/Library/Mail/V2/EWS*, and then re-adding the account. It resolves the issue temporarily, but then returns to not being able to sync. I've tested it with a number of other users accounts on the same Exchange system, and it's working as expected. OSX is version 10.8.4 with current patches as of 10/7/2013.
The connection doctor shows that the connection to EWS is green. The activity monitor looks like it's updating the folders properly on sync.
Here is the message I get in the logs in high volume when Console logging is turned on:
*** Assertion failure in -[EWSConnection sendMessage:forRequest:], /SourceCache/Message/Message-1508/Message/EWS/EWSConnection.m:555
Received an unexpected error: Error Domain=EWSExchangeWebServicesErrorDomain Code=277 "The operation couldn’t be completed. (EWSExchangeWebServicesErrorDomain error 277.)" UserInfo=0x7fd1c9a97e70 {EWSErrorMessage=The request failed schema validation., NSUnderlyingError=0x7fd1c85106f0 "The operation couldn’t be completed. (SOAPWebServicesErrorDomain error -1000.)"}, response: (null)
0 CoreMessage 0x00007fff86a4a517 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 141
1 CoreMessage 0x00007fff86a4a388 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 215
2 Message 0x00007fff8daa5a8e -[EWSConnection sendMessage:forRequest:] + 762
3 Message 0x00007fff8daaeab3 -[EWSGateway sendMessage:forRequest:] + 69
4 Message 0x00007fff8dac543a -[EWSRequestOperation executeOperation] + 110
5 CoreMessage 0x00007fff86a65b80 -[MonitoredOperation main] + 219
6 Foundation 0x00007fff92475926 -[__NSOperationInternal start] + 684
7 Foundation 0x00007fff9247d0f1 __block_global_6 + 129
8 libdispatch.dylib 0x00007fff87f4af01 _dispatch_call_block_and_release + 15
9 libdispatch.dylib 0x00007fff87f470b6 _dispatch_client_callout + 8
10 libdispatch.dylib 0x00007fff87f481fa _dispatch_worker_thread2 + 304
11 libsystem_c.dylib 0x00007fff9068ad0b _pthread_wqthread + 404
12 libsystem_c.dylib 0x00007fff906751d1 start_wqthread + 13 -
Hi there,
I am looking for step by step instrcutions on how to configure SFTP Codeplex adapter for both receive and send ports.
Out business partner with whom we push/poll the files from wants us to use SSH encryption/decryption etc.
Just wondering if the following functionality is supported in Codeplex SFTP adatper without having to write any code.
Appreciate if there is manaul to do this for SFTP. BTW I do have all the our public and private keys and business partners Public key for configuring.
For Send port: 1. we would need to encrypt the file with our business partners public key
2. sign the file with our private key.
3. Send the file through to SSH client which eventually transfers to Remote server.
Receive port: 1. Connect to SSH Server with SSH-2 key and receive the file
2. Verify the file's digital signature agaisnt the Business partners PGP public key
3. Decrypt the file using our PGP Public key
Thanks in advanceYes it is supported.
You can find its documentation in this link
You can find section X.509 Certificate Identity Keys
You can set public and private key in property SSH Identity thumbprint of send and receive port
I prefer to test it using client tool like
FileZilla or WinSCP then test it using sftp adapter
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer -
Exchange 2007 - User's mailbox disappeared in EMC but they can still send and receive email
We have a user that was complaining about not being in the address book anymore. After I did a little rooting around in management console I noticed that their mailbox was no longer listed under Recipient Configuration -> Mailbox, but what's weirder
is I can do a search and find her listed in the results - at which point I can right-click her name and do everything I normally can with no problem. Listing all of the mailboxes with PS shows her still there too. As far as I know, she is the only user
having this problem.
She can send and receive email just fine, but like I said, she is no longer in the global address list so other users have trouble sending her stuff. At her computer, I tried repairing her email (under account settings) but the process would fail when
searching for her settings. I don't know if this is a stupid thing to add, but I did run Clean-MailboxDatabase on our first storage group to see if her mailbox had been deleted or disconnected or whatnot but nothing is currently showing up in Recipient
Configuration -> Disconnected Mailbox.
Some info on our setup:
Exchange 2007 on Windows Server 2003r2
AD is on Windows Server 2008r2
Her computer is running Outlook 2010
I did restart our Exchange server 2 days ago to update VMWare tools, but no Windows updates were installed. She couldn't tell me exactly when this problem started, but it was more-than-likely in the last couple of days as she was recently married and
I had to change her name in AD and Exchange - so everything was confirmed 100% functioning 2-3 weeks ago.
I'm at a lost for what the issue could be, but then again Exchange isn't exactly my forte, so any help would be much appreciated.First things first - is her mailbox hidden from address lists? Run
Get-Mailbox <alias> | Fl HiddenFromAddressListsEnabled to find out. It probably isn't, but we need to clear this, just in case.
Now, assuming it is not hidden, have you searched for both her maiden and married names in your directory? Often, when the name on a mailbox is changed, the display name is not - and vice versa. Also, has her email address also changed?
If so, has a secondary proxy address been added to reflect her maiden name? I'd do this, just to be sure things aren't lost that should be delivered to her.
I can't think of anything else obvious right now. After you've checked these things, get back to us with their results.
Maybe you are looking for
-
Exchange rate difference in transaction FB05
Dear experts, I have a question regarding exchange rate difference in transaction FB05. Prerequisite:We have implement accounts for the exchange rate difference in OB09. I try to clear the customer in a billing transfer document in FB05, and I didn't
-
E-mail address added to incoming invitation
Hello, Last time I get more and more invitiations in iCal (as expected, it's agreed with the sender). Thet send the invitation from either Outlook or Lotus Notes. When I look in the invitation not only my mail address is in it, but also the one of my
-
Dear all, When i am trying to edit specification data for a substance I am not finding any values in value assignments under physical chemical properties . What I am I missing ? Regards, Rajaram.K
-
[SOLVED] Fluxbox won't work and mirror problem
Hello all, I recently tried to make the switch to Arch again from Ubuntu. Ran into some trouble though. Obviously I was using the 64 bit version. It installed just fine, but once I booted into it I couldn't use pacman to install anything or even refr
-
I cant open Numbers in my computer, it says to download new version in app store. i have done that but it still continues to give me that message.