Send and Receive script for Outlook 2011 not working
I used to have a script to send and receive mail in Entourage. When I change the script to:
tell application "Microsoft Outlook"
connect to every pop account
connect to every imap account
send
end tell
It hangs at the second line and I am not able to fix it, anybody know how to do this?
I don't have any accounts in Outlook to test, so this is a bit of a long shot, but could it be that you want something as simple as the following? I assume this is part of something bigger, as cmd-k will do the same thing.
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #FFDDFF;
overflow: auto;">
tell application "Microsoft Outlook"
send and receive all
end tell </pre>
Similar Messages
-
Send and Receive to internet outside is not working
Hello everyone,
I have just launched my own exchange 2013 infrastructure on server 2012 R2. everything works within the organization. however, send or receive emails to outside on the internet is not working. here is the info and what i have done so far:
My organization domain is .local,
I have created accepted domains as mail.mydomain.com ( mydomain.com) is registered with powweb.
I created send connector and receive connector is already there by default on exchange 2013
send connector is MX record type. I also setup two mx records on my external DNS as follow
mail - IP address of my router ( then port forwarded port 25 to my exchange IP from router)
@ - mail.mydomain.com
* - Mail.mydomain.com
CAN anyone plz help me what am i doing wrong ... i have been working on this till 4 am and its frustrating me
and finally i got this message from my end when i send to outside email:
Diagnostic
information for administrators:
Generating server: EX2013-MBX-CAS.MYDOMAIN.local Receiving server: hotmail.com (65.54.188.72)
[email protected] Remote
Server at hotmail.com (65.54.188.72) returned '400 4.4.7 Message delayed' 7/3/2014 11:21:39 AM - Remote Server at hotmail.com (65.54.188.72) returned '441 4.4.1 Error encountered while communicating with primary target IP address: "Failed to connect.
Winsock error code: 10060, Win32 error code: 10060." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 65.54.188.72:25'
Original message headers:
Received: from EX2013-MBX-CAS.MYDOMAIN.local (MyrouterIP)
by EX2013-MBX-CAS.mydomain.local (MY PRIVATE EXCHANGE IP) with Microsoft SMTP Server (TLS) id 15.0.847.32; Thu, 3 Jul 2014 03:08:05 -0500 Received: from EX2013-MBX-CAS.mydomain.local ([::1]) by EX2013-MBX-CAS.mydomain.local ([::1]) with mapi
id 15.00.0847.030; Thu, 3 Jul 2014 03:08:05 -0500 From: Riaz Ansary <[email protected]>
To: "[email protected]"
<[email protected]> Subject:
Good Morning Thread-Topic: Good Morning Thread-Index: Ac+WleelD8gwEYWTQdKbx6+rBbFpXw== Date: Thu, 3 Jul 2014 08:08:05 +0000 Message-ID: <[email protected]al>
Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [192.168.0.150] Content-Type: multipart/alternative; boundary="_000_80e53235c8a44adca31979bdeb206a7bEX2013MBXCASCYNASOLUTIO_"
MIME-Version: 1.0Telnet to hotmail failed here is the result
Microsoft Telnet> o mx1.hotmail.com 25
Connecting To mx1.hotmail.com...Could not open connection to the host, on port 2
5: Connect failed
here is the SMTP test i did for incoming
Unable to connect after 15 seconds.
Test
Result
SMTP Connect
Failed To Connect
More
Info
Session Transcript:
Connecting to MyROutherIPAddress
7/3/2014 12:11:00 PM Connection attempt #1 - Unable to connect after 15 seconds. [15.01 sec]
MXTB-PWS3v2 15007ms
reverse lookup
blacklist
port scan
subnet tool
Reported by mxtoolbox.com on 7/3/2014 at 12:10:45 PM, just for you. (History) Transcript
mx:cynasolutions.com Find Problems
mx
Register for a Free MxToolBox Account for access to more features.
Pref
Hostname
IP Address
TTL
30
mail.mydomain.com
MYROUTERIP
60 min
Blacklist Check SMTP
Test
dns lookup
dns check
whois lookup
spf lookup
Reported by ns2.powweb.com on 7/3/2014 at 12:10:25 PM (UTC -5), just for you. (History) Transcript -
Unable to send and receive email for external domain
Hi,
I just installed Exchange Server on my 2K8 domain controller. I have set up the send connector and made necessary changes to the receive connector as well. I have updated the DNS records as well on my domain registrar. I can access OWA from outside my companies
network and is able to send and receive emails for my domain but unable to send or receive emails to any other domain. I have checked the delivery report and it says that the message has been queued on the server.
I also did nslookup. Results mentioned below:
C:\Users\Administrator>nslookup www.google.com
Server: localhost
Address: ::1
Non-authoritative answer:
Name: www.google.com
Addresses: 2404:6800:4009:802::1014
74.125.236.145
74.125.236.148
74.125.236.146
74.125.236.144
74.125.236.147
C:\Users\Administrator>nslookup www.microsoft.com
Server: localhost
Address: ::1
DNS request timed out.
timeout was 2 seconds.
DNS request timed out.
timeout was 2 seconds.
*** Request to localhost timed-out
Any help would be much appreciated!Hi hg01,
According to your description, I notice that you installed Exchange server on a DC.
It is not recommended to install Exchange server on a DC. I suggest install Exchange server on a member server. More details to see:
Installing Exchange on a domain controller is not recommended
http://technet.microsoft.com/en-us/library/ms.exch.setupreadiness.warninginstallexchangerolesondomaincontroller(v=exchg.150).aspx
About your issue, cannot send and receive externally, I suggest make sure the DNS can be resolved first.
Then, check whether Outlook Anywhere has been enabled. If not, please enable it on both Exchange server and Outlook client side.
Last, try to configure both Send Connector and Receive Connector.
More detailed error message will be helpful for the further troubleshooting.
Thanks -
Question about Sender and Receiver Structure for JDBC
Dear All,
I want to know why there is a fixed format for sender and receiver structure for JDBC. why cant we use the structure like what we want? explain me in detail.
ThanksGood Question:
We have to create our data structure based on the existing database table structure. While reading or writing , JDBC adapter convert our data type structure in to SQL Query Statements that matches Table structure. -
I need send and receive emails for edge server 2010
i have exchnage 2010 in our orgnization now working fine , i can send and receive emails for hub and also we have tmg and fortigate firewall(200B) , already install and configuration edge server(configure edge subscribtion file and edge sync) but still message
sent form hub and also receive form hub , what to do to receive from edge ? please help me i have 3 month search to fix his problem.Hello,
I recommend you use the Test-EdgeSynchronization cmdlet to check if the subscribed Edge Transport servers have a current and accurate synchronization status. If you have configured EdgeSynchronization successfully, please delete send connector
on Hub transport server.
Please uncheck "anonymous users" on receive connector for Hub server.
Please follow the ExchangeITPro's suggestion to check DNS MX record.
Cara Chen
TechNet Community Support -
(fn+F2 and fn+F3) for brightness are not working
(fn+F2 and fn+F3) for brightness are not working, while the other function working properly... help me plz
DJanoonWhat is the product number?
Did anything change before this started happening?
Power the system on and press F10 about once a second to get into BIOS. Once you are in BIOS, go to the configuration tab (typically next to last tab) and set Action Keys to enabled. Save the changes, exit, and the system should reboot automatically. Test the brightness keys wihtout pressing the Fn key. I suspect they will not work in this state, but I want to rule out the possibilities while awaiting the product number.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
When use POP3 send and receive email, the outlook always popup a windows
Hello guys,
there is another question in Exchange 2013, when i tired to the send and receive email by using POP3, the outlook always popup a windows ,the error message is "ERR Logon Failure, Unknown user name or password ". I can fully confirm that the username
and password is correct.
The Exchange confguration as below,
POP3 : 995 SSL
SMTP : 587 TLS
I'm very appreciate for guys help.
Thanks
David
Exchange Lync SharepointHi,
How did you configure the POP3 account in the outlook?
Please refer to the following article to configure it:
Configuring POP3 Email in Microsoft Outlook Using a Secure Connection (SSL)
Thanks.
Niko Cheng
TechNet Community Support -
One email account sends and receives emails, the other does not
I have two different email accounts set up on my phone. They both worked, until I had my phone was serviced and wiped clean. Now one account sends and receives and the other does not. I have tried everything from deleting the account on the phone and rebooting, to changing my password. When I reactivate the account I get a message saying "activation server" and that messages will be forwarded within 20 minutes and they never come. I'm not sure what else to try.
Hello dalite and welcome to the BlackBerry® Support Community Forums.
Sorry to hear you are having email issues.
What type of email are you unable to receive - Gmail? Hotmail? Internet Service Provider hosted email?
What is your BlackBerry PIN to investigate?
When you go to send an email using this account, do you get an error? Are you able to select this email account for sending an email?
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
I am not receiving all my txt messages, I think it is because in Setting -> messages -> send and receive, my cell phone number doesnt have a check next to hit. Im not able to check it. any ideas?
Old phone is off and number is fully ported? SIM card new and installed/seated properly? All Apple credentials disabled if coming from iPhone?
-
Is there a free app for sending and receiving pics for ipod touch
My friend just received an ipod touch. Looking for a free app for him to use to send and receive pics. Can you help me with this? We are dummies when it comes to technical things, so please keep it simple for me! lol
there is no official app for sharing pics with i device to i device but there is a rumour that you can do it from an app called ibluenova.
-
Send and receive emails for iMessage and FaceTime
Hi everyone! I'm in a tough situation. On iMessage and FaceTime, I want to use a different send and receive email but it says next to the one I type in
Error: unable to verify email because it is already in use..... And it still has a check next to the email I don't want. Can someone plz reply
Soon!! HELPiOS: FaceTime is 'Unable to verify email because it is in use'
-
Stop Sending and Receiving Emails for the employee which is no longer exist
Exchange 2007
Hi There,
I have lot's of mailboxes in my exchange server which their users are not with us anymore.
I would like to stop receiving any emails for them.
I know if I go to "Mail Flow Settings\Message Delivery Restrictions\Accept messages from\Only Senders in the Following List" and select a dummy user it works but it sends my server information to the sender. and I do not want to give the
information.
Any idea how to:
Stop sending / Receiving email for these type of users?
OR
Changing the respond message?
Thank you in Advance for your timeYou have a couple options. Removing the mailbox would be the simple solution to stop mail flow, but I am assuming you need the mailbox which is why you have not taken this route.
Alternatively, if you have a message filtering solution in place that sits in front of your Exchange environment, you may be able create a filter to block inbound messages for a specific address so the message never reaches your internal Exchange servers.
This would prevent any information regarding you Exchange servers being returned.
If you do not have a filtering solution to do this, you can create a delivery status notification (DSN) so that a custom response is returned when messages are sent to a mailbox. Refer to this article on creating a DSN:
http://technet.microsoft.com/en-us/library/aa996803(EXCHG.80).aspx -
Email delivery failed. unable to send and receive email for da device 9780 bold
Hellow, I m using
BlackBerry® 9780
smartphone (3G, Wi-Fi)
6.0 Bundle 863 (v6.0.0.285, Platform 6.5.0.54)
3G Bands 1,2,5,6
Cryptographic Kernel v3.8.6.5
Branding Version: 1.0.99.538J
Micro Edition Configuration: CLDC-1.1
Micro Edition Profile: MIDP-2.1
Micro Edition JTWI Version: 1.0
Micro Edition Media Version: 1.1
Micro Edition PIM Version: 1.0
Micro Edition File Version: 1.0
Micro Edition Bluetooth Version: 1.1
Micro Edition Location Version: 1.0.1
Micro Edition Security and Trust Services (APDU) Version: 1.0
WLAN Version: 4.2.1.40
www.blackberry.com
Now the problem is I have my email {REMOVED} associated with this device. But I m unable to send receive the email
There is an error I get like delivery faliure please resolve meh and assist me
Mod Edit: Removed personal information to comply with Community Guidelines and Terms and Conditions of Use.Hi and Welcome to the Community!
divyaan wrote:
There is an error I get like delivery faliure please resolve meh and assist me
Sadly, from "like", we can't really understand the error message you are receiving...exact and complete content of any errors presented are always better to help us understand rather than vague hints and such.
In any event, I recommend this. With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Delete and Resend Service Books (pre-BB10 devices only)
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
If you have no CMIME entry, then skip the deletion
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should try deleting and re-adding your configurations for the affected email accounts. Otherwise, you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Outlook (office for Mac 2011) not working with Mountain Lion
Ever since I upgaded to mountain lion outlook (office for Mac 2011) takes 2 minutes to start up. Apple support tells me that MSFT has not done its work. SO I don't recommend anybody who is using outlook to upgrade.
This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office in any way. I suggest you post Office related questions on Microsoft's own forums for their Mac products.
http://www.officeformac.com/productforums -
Office for mac 2011 not working correctly on new Macbook Pro- Help
I have a MacBook Pro from September and had One to One transfer all files/programs (including 2008 Office). I then purchased the Office for Mac 2011 program and they installed it (I guess they did not remove the older program). It has never worked correctly and I have tried to contact Microsoft to no avail.
None of the documents open with Fonts intact (Word and Excel open up blank though the graphic elements show up. I have to Select All and choose a font to make it show up.
Powerpoint is barely functional (none of the layouts actually show up when I select them, the sidebar of slides does not update as I type or try to change themese, etc. And then when I type, the program freezes and then shuts down.
I have uninstalled 2008 and 2011 and then re-installed 2011 but the same issues occur. Someone on the microsoft community told me to remove my duplicate fonts, I ddi that and the same issues still occur. My brother has the same laptop and Office for Mac 2011 and no issues.
Can someone help me basically try to start fresh- should I uninstall again? (I waas told that installing/uninstalling too many times can further the problem).
Help!
Thanks,
BerniceThis forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office in any way. I suggest you post Office related questions on Microsoft's own forums for their Mac products.
http://www.officeformac.com/productforums
Maybe you are looking for
-
Error while cancelling the material document.
HI, while cancellation of material document thru MIGO screen getting error Deficit of PU IR quantity 20.000 EA Message no. M7021 Diagnosis Shortfall below the specified stock level or quantity amounting to 20.000 EA. Diagnosis Shortfall below the spe
-
Acrobat Pro 8.2.4 and Reader 9.4.0
"This file is set to be launched by this PDF file. This is currently disallowed by your system administrator." Receive above when trying to open a PDF identified with a link (URL). The program being run is iexplorer Have tried the "Trust Manager" stu
-
Hi I have a Mercedes Benz E220 CDI with the COMAND systems and a SAP V2 Bluetooth cradle, which I currently use in conjunction with my Nokia N95 I am consiering buying the new N97 and want to know whether it is compatiable with the SAP V2? Can anyone
-
Manupulating Excel File Stored In Database
Is there any way I can manipulate the excel file that is stored in the database as LONG RAW ? I need to allow user to manupulate the excel file that is stored in database and accordingly fetch the specific data from that manipulated Excel File of Dat
-
Updates von Photoshop Elements herunterladen
Hallo zusammen, an unseren Unternehmens-PCs kann ich keine Updates für Photoshop Elements und Photoshop Camera RAW auf Grund von Download-Beschränkungen herunterladen. Gibt es eine Möglichkeit, die Updates von einem PC außerhalb des Netzwerkes herunt