Send and receiving XML documents out/into APO
Hi all,
We are on APO 5.0 and want to send our forecast from a planning book to a partner and also receive their data.
Has anybody ever done this via XML?
We are not planning to use ICH. But we have XI or could use Business Connector?
Any response is appreciated! Thanks
GM
Hi,
I would suggest you for XI with Proxy. Or either you can go for RFC but better is using proxy for communicating.
Thanks,
Prakash
Similar Messages
-
How send and receive XML file from PI 7.0 via SSL
Hello experts,
Can you point to some documentation , examples , links where I can get some information on how to send and receive XML files using PI 7.0 via SSL ?
Thanks in advance.Hi,
refer to the following links.
Enabling SSL
http://help.sap.com/saphelp_nwpi71/helpdata/en/14/ef2940cbf2195de10000000a1550b0/content.htm
Adapter specific security
http://help.sap.com/saphelp_nwpi71/helpdata/en/f5/799add57aeee4f889265094a04695c/frameset.htm
regards,
MIlan Thaker. -
Sending and receiving fax documents
I am wondering if there is a way to send and receive fax documents through my iMac. My internet connection is through a cable modem and have only found a way to fax using a modem. Any ideas would be great. Thanks
Unless your iMac has a built-in modem port, you will have to use an external fax modem for direct faxing. Otherwise, you can use an internet fax service such as eFax or FaxZero (US/Can only.)
Matt -
It's not my phone number under settings / messages/ send and receive, it's greyed out , not ticked and not changeable, so that's probably why iMessages only come into my ipad not my iPhone. Think it'll be the original phone number the phone had before my own number was assigned to it. How can it be changed?
Turn off imessage and turn it back on. Then check the settings again.
If that doesn't work, then you may need to restore from your backup, if that doesn't woirk then restore as new. -
Receiving XML document and getting attachment via URL
What is the best method to retrieve a file from a provided URL. Here is the scenario. A system will send us an XML document via an HTTP post but the source system is unable to send us the associated attachment as a MIME attachment instead in the XML they will include a extra node with the URL to a file we need to get. What is the ideal method of retrieving this file once we receive the XML message. If the provided link was an ftp site we would hold the message in BPM and use the file adapter but since this is a full url such as http://someserver.com/myfile/file.doc we are looking for the best approach. On thought was a Java Proxy.
RegardsHi,
there are just two approaches:
easy one - java proxy
more diffcult - creating sync adapter for http xmls
I'd go for java proxy (if possible from secutiry point of view)
as you will have the link (so no "adapter configuration" necessary in your case)
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
Ever since I updated my iPhone 4S and my iPad 2 to IOS 6 all my iMessages are coming to both my iPhone and my IPad. How do I stop the iMessages I send and receive on my phone from receiving on my iPad as well? I have tried going into my settings and making sure I'm only set up to receive iMessages to my cell number and not my email....but that didn't fix the problem.
Here the way to do it, for both, or for only one Go into your settings, Messages and turn on iMessage. It will then send messages that are iMessages to both your iPad and iPhone. You can also turn off this feature on the iPad if you do not want to receive messages on the iPad.
-
Sender and Receiver details in XML for FAX
Hi,
I have to send below informations in XML which is for fax(RightFax).
I am creating XML file in Smartforms.
They told me to provide sender and receiver details in XML. I dont know where to fill all these details.
Has anybody worked with RightFax for Smartforms? Please share with me.
Thanks,
Rameshhi,
upon understading your question i got a link.please go through this .
https://forums.sdn.sap.com/click.jspa?searchID=12286932&messageID=5229365
please reward me if helpful. -
Mail does send and receive then kicks me out
My emails have been working fine on my iphone, now all of a sudden this evening when I click the Mail icon, it does a send and receive then kicks me out back to the main desktop. Even if I have opened an email in preparation to read it, it kicks me out once it has done a send and receive.
I am currently fetching Pipex mail and Yahoo and Mobile me is on pushClose the Mail app in the Task Bar and re-launch.
Double-click the Home button to reveal Task Bar. Hold Mail app down for a second or two; tap the minus sign to close app.
If it still doesn't work, try a reset.
Hold the Sleep and Home button down (together) for about 10 seconds until you see the Apple logo. -
I'm currently in Mongolia and can not call out from my iPhone 4S using a Mobicom SIM card. I can receive calls and send and receive texts. I use my regular SIM card from Canada and it works fine. It worked fine 6 months ago.
Having incorrect APN settings shouldn't be stopping text message from coming though. But to get the correct APN setting just delete any APN profiles on the device. And the EE ones should just get installed but you can just to make sure use the link that has posted.
You don't need a online account to top-up unless your using the account to top-up through.
CLICK HERE FOR OTHER WAYS TO TOP-UP
with text messages not coming through I have to ask are you getting a signal ? -
I am having a problem successfully opening an email containing attachment. I can open the mail program...send and receive emails...and view emails that do not contain attachments. But whenever I click on an email containing an attachment, I get the spinning beach ball for a few seconds and then the entire program closes. Any suggestions before I make a one hour trip to the Apple store for help?
I don't think an interactive portion of a PDF is an obscure problem (lots of designers I know use rollable PDF files for emailing 3D models) and while I understand that it's in a legacy program, there is no guarantee if I purchase Acrobat X, that the same problem won't exist. It's no an issue in Reader 10 but then again, it wasn't an issue in Reader 9 either. Since Adobe doesn't give trial versions for Mac (stupid), I have no way of checking this. The problem doesn't annoy me as much as being an Adobe product user who upgraded only to not have functionality and not have a way to have it resolved.
-
Hi All,
what are the settings need to be done on both XI system and SAP R/3 system while XI system is communicating to any SAP R/3 system through an IDOC on any side sender or receiver.
Will there be any difference in the settings for sender and receiver SAP R/3 systems.
Could any body please suggest me some blogs or documents.
Thanks in advance..
Regards,
Radhika.Hi Radhika,
Hi
http://help.sap.com/saphelp_nw04/helpdata/en/18/22b800773211d396b20004ac96334b/content.htm
http://www.erpgenie.com/index.php?option=com_content&task=view&id=346&Itemid=57
http://searchsap.techtarget.com/loginMembersOnly/1,289498,sid21_gci994575,00.html?NextURL=http%3A//searchsap.techtarget.com/expert/KnowledgebaseAnswer/0%2C289625%2Csid21_gci994575%2C00.html
http://www.thespot4sap.com/Articles/SAP_ALE_Other_Concepts_Conclusion.asp
Refer this material..
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
Create a Customer Distribution Model (CDM);
Add appropriate message types and filters to the CDM;
Generate outbound partner profiles;
Distribute the CDM to the receiving systems; and
Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
You can directly create an iDoc using some transaction like...
Use TCODE bd10 - to Send Data
and TCODE bd11 - to Get Data
and you can check the IDoc List using TCODE we02.
As you want step by step procedure.
1. Define Logical System and Assign Logical System
TCODE sale
2. Define RFC
TCODE sm59
3. Define Port
TCODE we21
4. Define Partner Profile
TCODE we20
5. Define Distribution Model
TCODE bd64
6. Send Data
TCODE bd10
7. Get Data
TCODE bd11
8. IDoc List
TCODE we02
There are basically two types of IDOCs.
Basic IDOCs
Extended IDOCs
Idoc Components
Basic Idoc
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extension Idoc
Extending the functionality by adding more segments to existing Basic IDOCs.
Creation of IDoc
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Create IDOC Type
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
u can also check all these links related to idocs
http://www.allsaplinks.com/idoc_sample.html
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sappoint.com/abap.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseCategory/0,295197,sid63_tax296858_idx0_off50,00.html
http://sap.ittoolbox.com/documents/popular-q-and-a/extending-a-basic-idoc-type-2358
http://help.sap.com/saphelp_47x200/helpdata/en/dc/6b7eee43d711d1893e0000e8323c4f/frameset.htm
Reward points if this helps
Regards
Vani. -
Trouble send and receiving messages and trouble calling people or receiving phone calls
Hello everyone, I bought a Blackberry Q5 one year ago and has worked perfectly since but on christmas day I had was struggling to send message to people I thought nothing of it since it was christmas and people would be wishing there families and friends a merry christmas. So i just carried on as usual not aware that the problem was much worse then i thought, since then I have tried time and time again to try text people and call them but nothing would happen.
The Problems I am experiencing,
Everytime I try sending a message it fails and times out after a while doesn't matter whom they are being sent to it's the same story no matter who I send them to, and then of course when i try calling someone the phone goes to the calling screen but doesn't make a sound for atleast 10 seconds then a message pops up saying "Call Failure, The call could not be connected. Please try again later". This message appears even when I ring '789' which is the number to find out what my balance is on my contract.
At first I thought it was the Sim what was cauing the problems but when i swapped it into another Virgin phone i received quite an alarming amount of messages what would not come through on my phone, this is when i realised I am not just struggling to send messages but to receive them as well. I have scoured the internet for possible answers but nothing has worked, so far I have tried manually scanning for available networks and selecting the correct one which did not change the problem this didn't make things better nor did it make things worse.
I have also tried changing the data services while roaming settings which again did not make any differences, I have tried changing network mode no changes again, turning the mobile network off all together and then turning it back on after 5 minutes no success there either. I have even reset the phone back to factory setting to try and fix the problem, but no, the problem still will not go away.
Please if there is anyone out there who has any ideas on how to fix what is happening to my phone please do give me your advice, at this moment I really need a miracle to come around at the next corner.Hi rhupa!
Here is an article that will help you troubleshoot this issue:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Mail Connection Doctor shows one or more red dots in the account Status column
Check your Incoming IMAP or POP and Outgoing SMTP email account settings
Use Apple's online Mail Setup Assistant to discover what the correct settings should be for both your Incoming (IMAP or POP) and Outgoing SMTP email servers. If your email service provider is not listed in the Mail Setup Assistant, visit your email service provider's website or contact their support staff to get the correct settings. You can use this "cheat sheet" when asking your email service provider about the settings you need.
After you have the correct email service provider settings, make sure Mail is configured properly.
Click here if your Incoming and Outgoing email account settings are correct, but the issue persists
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
I import messages into Thunderbird. I send and receive emails. One of the things I like about Thunderbird is that I can insert (image, link, etc) right where I want to, and I can Attach. But not just a simple attach file. No, I can also click Attach and choose Webpage. A lot of web-based emails are plain, simple, no frills - Attach file and that's it.
So I need to have my client be able to do the same thing I do when sending out emails, Namely sending out emails with an Electronic Press Kit (EPK) attached - which is to say, a webpage (not a pdf in our case). So, I need her to download, install, and use Thunderbird.
Here's the problem and my question. She needs to access, send, and receive from my email account. That would be easy if it was simple attach files - she could just login on the web, go to squirrel mail and bang it out.. Here it is: She needs to be able to import the messages to be able to reply to some messages - she needs access to what I have access to. She needs to use Thunderbird so she can take advantage of the features like insert image with link or attaching a webpage. My question is how will this affect my use? Can 2 people simultaneously and from different locations access and use the same email account or is it a case where her importing the emails would cut me off..Is it an either or thing? Basically, can her and I both import the emails or can they only be imported to one location at a time. Because every time someone sends me an email i get it right there on my Thunderbird application..it's imported to my Thunderbird..I want her and I to be able to do that without affecting each other. I don't want her to start importing to her desktop and then I can no longer import. If she says "point those messages to my computer what will happen to my ability to access them on my computer in the same manner I am currently?I think there is a contradiction in your requirements. You want two people to share an account and you don't want either to interfere with the other.
The short and simple answer is to use IMAP to connect to the mail server. If your current email provider doesn't offer IMAP, find another that does. This is old technology already and it's disgraceful that some email providers haven't yet put it in place.
IMAP means that your messages are stored on the server and both of you will see exactly the same set of messages. And therein lies the contradiction; you will both see changes made by the other so you are inherently interfering with one another.
Caveats: some providers may not permit you both to access the account concurrently, and even if they do, things may become interesting if you both choose to work on the same message simultaneously.
Note that all of this is about email servers and protocols; your choice of Thunderbird as your email client has little bearing on the situation. -
Is there a way to send and receive SMS on multiple cellular devices without using iMessage?
I currently own a cellular iPad mini and an iPhone 4s and would like SMS to be the same on both devices as well as my desktop.
After many months of struggling with iMessage, I decided to turn it off entirely. I discovered that my best friend did not receive dozens of my texts over the span of a few months (I compared our message history side by side). Seems like it had something to do with traveling in and out of wifi zones or possibly conflicts between our two carriers, ATT and Verizon. Regardless, I am not willing to dive into iMessage fully until this gets sorted out. Further, SMS is the standard message format for everyone outside of the Apple sphere, and I do not feel comfortable lumping them together into one app. If I decide to switch to Android, will all of my contacts with iPhones continue sending me iMessages?
Thank you for your help!Is there a way to send and receive SMS on multiple cellular devices without using iMessage?
Search the iTunes App Store for any 3rd party SMS apps that may be available.
If I decide to switch to Android, will all of my contacts with iPhones continue sending me iMessages?
Android phones don't receive iMessages, they can recieve SMS messages sent through the iOS Messages app. The app that your contacts choose to use to send you messages is completely up to them. -
IMessage waiting for activation. Phone number not listed in Send and Receive at?
I'm going to try to be as descriptive as possible, as I'm not too sure what else I can possibly do to resolve this issue.
3 or 4 days ago I requested a number change through my provider. Not knowing that I had to turn off iMessage whilst waiting for the change to occur, I left it on.
Later that day my friends were complaining that I was sending them texts from two different numbers, one being my new number, one being my old number. The thing is, I'm using the exact same SIM card and it's a little unusual to have two numbers for one SIM. I then realised that iMessage is ONLY registering my iTunes e-mail address and OLD phone number as an option to 'Send and Receive at'. I have spoken to Optus (my provider in Aust.) and Apple, I have gone into an Apple store, had the phone replaced, restored newtwork settings, restored phone altogether, turned on/off iMessage and Facetime, checked date and time, made sure my correct number is listed in Settings > Phone, etc etc etc I've done EVERYTHING listed in all forums that I've read from people experiencing this same issue.
I can choose to select my old phone number in iMessage, and can then send messages to others using iMessage from the old number, and if I switch it off, I'm then using SMS to send messages, and it's from my new number again! It's very frustrating not having all features on my phone working correctly.
If I switch iMessages and Facetime on, not using my Apple ID to sign in, it simply says 'waiting for activation' and after a few hours, tells me it was unsucessful and to try again. I'm all out of options now, Optus don't know what to do, Apple don't know what to do and I don't know what else to do! It's been 4 days! Someone please help!?Just thought I'd let everybody know how it finally got resolved 1 week later!
After trying absolutely everything, and I mean EVERYTHING that Apple support, apple forums etc told me to do, the only thing that worked was turning iMessage off, waiting for at least 24 hours at then turning iMessage back on.
It activated itself within a few minutes, no dramas at all!
Hope this helps!
Maybe you are looking for
-
Decode function not called for a custom component
I know this problem happened in the past - in the EA2, EA4 and I believe the beta version as well, but does anyone know if it has been solved for the release ? In short - I'm working with the release, created a menuBar component and the decode method
-
Please help.. And yes if there is a problem will it be changed i mean will my ipad be fixed or changed by apple?
-
IDS/IPS signatures to monitor streaming audio/video applications
Hi folks, Can someone advise on the names or signatures that could be successfully used to monitor the usage of streaming applications on the network. The plan is to feed them to MARS and then create reports on streaming applications utilization to u
-
Why can't i get the new itunes update
My computer will not download the new itunes upgrade. It asks me to download it and then nothing happens. How can I fix this?
-
Automatic invoice reduction - MIRO XBLNR1 - Reference field
Hello all, I've set up the automatic invoice reduction in MIRO due to errors in vendor invoice (with subsequent credit received in paper). In this process there are two FI documents (A1 for invoice and background A2 for reduction) regarding the origi