SEND AS

Exchange 2010, Outlook 2013. My CEO's assistant was always able to SEND AS him as his account loads in her Outlook Profile. She would go to his Inbox and start a new email and change the FROM to him and send as him. Last week out of nowhere
when she tries these same steps, the email fails to send. It's trying to SEND AS him on behalf of him. I only have permissions for her set in Exchange under Manage Full Access Permission. Not sure what's going on. Any help? Thanks.
Network Administrator

Hi,
We can run the following command to add Send As permission for this user:
Add-ADPermission -Identity CEO -User Assistant -Extendedrights "Send As"
If the command above fails, we can directly add the send as permission from ADUC:
1. Open ADUC, click View and make sure Advanced Features is checked.
2. Expand Domain.com > Users. Right-click the CEO account > Properties.
3. In Security tab, add the Assistant with Send As permission, just like:
4. Click Apply > OK to finish the setting.
Then check whether the assistant can send as the CEO or not.
Regards,
Winnie Liang
TechNet Community Support

Similar Messages

Cannot send email from iPad2 with Shaw

Hi there,
I have issues that I cannot seem to resolve:
I can receive from my shaw account but it sends all outgoing to the Outbox - I've double, triple cheked all incoming and outgoing servers - I even sat with my iPad next to my iMac to make sure everything matched.
it says The sender address "myemailadrees.com" was rejected by the server. even though I recive ok.
Help please??

I too have spend countless hours trying to get my iPad 2 to work with my Shaw email. I FINALLY got it to work this morning after about 3 months of trying different "solutions". Here is how I set my POP email account:
Incoming mail server:
Host name: shawmail.ed.shawcable.net (I live in Edmonton)
User name: my shaw email address without the @shaw.ca
Password: my Shaw email password
Outgoing mail server:
Host name: shawmail.ed.shawcable.net (I live in Edmonton)
User name: leave blank
Password: leave blank
Use SSL: off
Server port: 25
This has worked so far for me, so hopefully it will work for others as well. It seems like there is an lot of people on these forums going through the same frustrations. I was able to set both mine and my wife's email accounts on my iPad.

I click on itunes but doesnt open and says send error report or dont send

i click on itunes but doesnt open and says send error report or dont send

You will need to provide more details as we cannot see your computer screen. Does this happen every time you launch LabVIEW? What version of LabVIEW are you using? What version of Windows? Does LabVIEW crash? If so, what were you doing at the time it crashed?

How can I disable sending from one Mail account?

Hello. I have a gmail account that I use to subscribe to various newsletters and accounts. So it's essentially a read-only account for me. But I too frequently accidently send mail from that account. Is there a way to prevent mail from being sent from that account?

I want to do the same thing as the OP. I have tried making outgoing server none. And checking "always use this server so it prompts me to edit the message so that I manually select a different address to send from inthe drop down list. And selecting a different account for composing. Actually, all my outgoing emails keep coming from the one account I am attempting to disable. Got any other ideas?

When i send a PDF via e-print, it gets cropped, is there a way to prevent this from happening?

PDF's are printing fine when i print direct to the printer but when they are sent by e-mail they get cropped, is there a way to get the document to fit to page when sent as an email attachment?
The Printer in question is a HP LaserJet Enterprise 500 color M551n, the printer is brand new installed last week so i don't know if this is the norm or not.
Edit: Please can someone please explain how to correct this.

If you're using a desktop or notebook PC to send the email you could try installing the HP ePrint Mobile Driver software on your machine, the link to the download is here. This will allow you to print the PDF to any ePrint capable printer without having to email it to the printers email address as an attachment.
Once installed and with your PDF open on your machine, select Print from the File menu, then select "ePrint" from the list of available printers (don't select the actual printer itself) and click Print in the bottom right corner of the box. A dialogue box will open showing the avaialble ePrint printers you can print to. Click on the Connected button on the left of the screen to add your printer to the list if its not listed.
Hope this helps.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Filename in sender Mail Adapter

Hi Experts,
Brief about Scenario:
Invoice generated with PDF format in R/3 system and send to mail box. XI pick that file from mail box and deposited in SFTP Server.
Landscape in XI end.
Mailbox - - - XI 7.0 - - - SFTP
The file name generated with CompanyCode_InvoiceType_InvoiceNumber.PDF from R/3 system. So that Same file name should be deposited in SFTP Server . Here CompanyCode and InvoiceType are static and invoiceNumber generated dynamically with PDF format.
My question is How to get file name from mail box.
Thanks in advance.

Hups. I forgot what was your main problem
To get attachment file name you can try to implement you own adapter module as described [here|http://wiki.sdn.sap.com/wiki/display/XI/Adapter%20Module%20PI%207.0%20Get%20Attachment%20Name?bc=true]:
I found it in this [thread|Need to get the Mail attachment name as it is to the receiver file adapter;.
Please check that thread. The question is "not answered" but the last post states it was solved that way.

FileName in Sender File Adapter Module

Hi Folks,
In my sender file adapter have written a module to read the picked file name. The protocol used is NFS.
Notice that the file name read in the module has the absolute path, including the directory path. E.g The file name xyz has to be picked from source directory
XIServer\Outbound. In the module when I retrieve the file name, it comes up as
XIServer\Outbound\xyz. Is this expected behaviour?
I was expecting just the file name<xyz> to be retrieved.
Thanks,
Anand

HI,
Create an UDF and write this code.
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key =
DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
in Adapter u will have Adapter specific parameters check the file name check box.
Using this UDF u will get the file name at target side.
Regards,
Phani.

Cannot send email from my Touch (connection to smtp server fails)

Hello,
I have a new iPod Touch with 1.1.4 and the January apps. I am having a problem setting the Mail application.
I am trying to connect to the IMAP/SMTP servers at my university. I am using the exact same settings and passwords I use on my laptop, which works fine. I can receive email fine on my Touch, but every time I try to send one it fails tellings me "the connection to the outgoing server smtp.myuniversity.edu failed".
If I on purpose write a wrong password for the outgoing mail, the error message I get is different ("check the account settings for the outgoing server smtp.myuniversity.edu").
The university IT people confirmed my settings, and told me that there is nothing blocking any handheld device from using the server.
Does anyone know why this would happen?
Thanks,
Marcelo

Thank you very much for your responses
1) the link to mail setup is (sorry, it's quite long)
http://www.knowledgepak.com/kpaksonline/kpol.asp?PiAlias=kpolpi17&k2dockey=04096 3251575739@kpol17&ViewLink=true&SkipHeader=false&printformat=true
2) I am indeed using SSL, as instructed by IT
3) I do use port 587 instead of 25 (25 does not work either)
Any ideas? Thanks again.
MC

Cannot send email from iPhne 5s

I have just upgrade from iPhone 4 to iPhone 5s. Excited but now I cannot even send any email. No problem receiving.
My setting in my email account is POP, incoming and outgoing mail server is mail.optusnet.com.au which is the same seeting as my previous phone.
Can aynone help? Thanks

Hi,
Are you getting any error? Perhaps switching TLS/SSL on the SMTP configuration?
I've found this link that may help
https://devicehelp.optus.com.au/web/apple-iphone-5s/functions/messaging/setting- up-my-mobile-phone-for-email/
Edit: correct versino of the link

Cannot send email from yahoo mail client

I cannot open or send or attach anything to my email in the yahoo mail. I know there's nothing wrong with the email because it works on my laptop, just not on my computer. Could there be a setting problem, or a cookie problem or something?
I also cannot open Bonjour to see my printer settings. Everything was working fine yesterday.

outgoing mail server
SMTP - Yahoo! SMTP Server
primary server
Yahoo! SMTP server - ON
server port 465
That's what I have for my yahoo account.

Cannot send email from yahoo account on iPhone 5

I just got an iPhone5 and I couldn't set up my Yahoo email as "yahoo"--it would not allow me to complete the process despot multiple attempts. I had to set it up as an "other" account. I can receive and read emails on my phone, but when I reply those messages will not send. They go to the outbox and an error message pops up that says" the email account has been rejected by the server" Does anyone have advice on either issue: setting up yahoo properly and/or sending email from phone?

outgoing mail server
SMTP - Yahoo! SMTP Server
primary server
Yahoo! SMTP server - ON
server port 465
That's what I have for my yahoo account.

Cannot send email from non .mac server

I am only able to send/reply emails using my .mac address. My 2 other server addresses keep giving me the following message.
"Cannot send mail. One of the recipient addresses was invalid".
How can I fix this?

You should be able to send email from Safari, however I do wonder why you wish to do this and whether there is something inherently wrong with using your mail app and your iCloud address.

Cannot send email from Mail through .mac account

I have recently opened a .mac account and started using the email service. It works fine online however I am having difficulty sending messages through the Mail application in Tiger.
Whenever I attempt to send a message, a dialog box appears saying "Cannot send message using the server smtp.mac.com".
I have tried looking at the setting in preferences. I have deleted and .mac a/c setting in Mail and re-set them up, all the problem persists.
Please help!

Hello David.
Who is your ISP used for connecting to the internet and are you accessing an email account snd SMTP server in Mail provided by your ISP?
If so, can you send messages with the email account and SMTP server provided by your ISP?
Most, if not all ISPs now block the use of SMTP servers that are outside of their network (or not provided by the ISP used for connecting to the internet) on Port 25 which is the standard port used for SMTP servers. Some ISPs allow the use of an authenticated SMTP server only (such as the .Mac SMTP server) that is outside of their network on Port 25 but some block its use regardless.
These restrictions are part of an overall effort to prevent spam emanating from the ISP's domain.
Something to try.
Go to Mail > Preferences > Accounts and under the Account Information tab for your .Mac account preferences at the SMTP server selection, select the Server Settings below for the .Mac SMTP server.
Enter 587 in place of 25 in the Server Port field and when finished, select OK to save the changed setting.
Test if this resolves the problem.
If not and you are accessing an email account and SMTP server in Mail that is provided by your ISP used for connecting to the internet, select/use your ISP's SMTP server to send mail with your .Mac account which is invisible to all recipients.

Cannot send email from MobileMe account

Apple recently pushed out an update to the MobileMe calendar. Since upgrading my account, I am unable to send emails from Firefox4 (current version) in Windows. The page sits indefinitely at a loading screen. Apple Support won't help because it isn't an issue with Safari. Anyone else have this issue?

When using the MobileMe account preset to create the account, the SMTP server is created with 587 as the SMTP server port, which can't be changed when using the MM account preset to create the account.

Cannot send email from Verizon to a specific domain using the web UI

I'm trying to send an email to a specific address on a domain I own from a Verizon account using the web UI. Whenever I click send, a popup appears saying "Your e-mail contains the following invalid e-mail addresses:" followed by the email address. I can send email to this address from a GMail account as well as my work email.
In Chrome, I can see that a "code":1002 error is being produced.
Does anyone know why this would happen? Does Verizon check destination domains for reputation? Is there any way to debug this further?

rhodeislandred wrote:
I'm trying to send an email to a specific address on a domain I own from a Verizon account using the web UI. Whenever I click send, a popup appears saying "Your e-mail contains the following invalid e-mail addresses:" followed by the email address. I can send email to this address from a GMail account as well as my work email.
In Chrome, I can see that a "code":1002 error is being produced.
Does anyone know why this would happen? Does Verizon check destination domains for reputation? Is there any way to debug this further?
What is the domain that is giving you the error?

Cannot send email from promail.ptd in iPad Air

Help, I have deleted the accounts, rebooted the iPad & nothing has worked. My gmail is working fine but these other two from ptd.net cannot send. And, when I try deleting emails, they flood back into the account.

Hi,
Check if you have the Accepted domain settings are correct.
ECP->Mail Flow->Accepted Domains. Make sure that your default domain is the domain which is having the AD name (eg.domain.local)
Regards from ExchangeOnline.in|Windows Administrator Area | Skype:[email protected]

SEND AS

Similar Messages

Maybe you are looking for