Send attachment with BAPI_POEC_XML_SEND

Hello,
We are on SRM 4.0 and need to add attachment to orders.
We are transferring orders with this scenario : EBP -> (BAPI_POEC_XML_SEND) -> XI -> Marketplace -> Supplier.
Standard functionning sends attachments (in XML) if customizing is set to a web server.
Url is sent through the MF into xi towards supplier.
Has anyone idea how this customizing can be set? I tried with an FTP server but i always got exception 500 on the HTTP transfer. The http transfer is done through rfc destination 'SAPHTTPA' in sm59.
Thanks for your replies.
Laurent.

Hi
<u>Please go through the following SAP OSS Notes below -></u>
Note 450750 Attachments in XML output of purchase orders are missing
Note 392837 2.0C: attachments/texts in XML-output of purchase orders
Note 842181 sent Purchase orders: lineitem-texts in wrong order
Note 644560 Customer enhancements XML
Note 603521 Errors for PO XML output via BC are not recognized
Note 365276 Problems when sending EBP XML documents
Note 571010 Error in PO XML when attribute ADDR_BILLT not maintained
Note 524549 Sending bill-to address with XML P.O. from the EBP
Note 564546 ID of the SoldToParty assigned by the vendor
Do let me know.
Regards
- Atul

Similar Messages

Sending attachment with different name

Hi,
is it possible to send attachment with different name with javaMail?
If possible, is there a sample code to do it?
Thanks.
Edited by: user1071181 on Aug 6, 2011 2:14 PM

Hi,
I listed some of my code at below.
But i did not find attachFile method for messageBodyPart class.
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setDataHandler(new DataHandler(new MemoryDataSource(....getPDFObject())));
messageBodyPart.attachFile("abc.pdf");
messageBodyPart.setFileName("abc_2011_08_07.pdf");
messageBodyPart.setHeader("Content-Type", "application/pdf");
multipart.addBodyPart(messageBodyPart);
message.setContent(multipart);

Send attachment with maximum characters

I need to extract data from a table into a .csv and then send that .csv as an attachment.
I am converting the data to csv and assigning it to clob variable but table has huge data therefore procedure gets error out after around 7000 characters with
ORA-06502: PL/SQL: numeric or value error.
Please suggest a way to send attachment with maximum characters.
With the below sample code i am able to send atttachement upto 7000 characters.
DECLARE
v_From VARCHAR2(80) := '[email protected]';
v_Recipient VARCHAR2(80) := '[email protected]';
v_Subject VARCHAR2(80) := 'test subject';
v_Mail_Host VARCHAR2(30) := 'mail.mycompany.com';
v_Mail_Conn utl_smtp.Connection;
crlf VARCHAR2(2) := chr(13)||chr(10);
v_message clob;
BEGIN
v_Mail_Conn := utl_smtp.Open_Connection(v_Mail_Host, 25);
utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);
utl_smtp.Mail(v_Mail_Conn, v_From);
utl_smtp.Rcpt(v_Mail_Conn, v_Recipient);
utl_smtp.Data(v_Mail_Conn,
'Date: ' || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf ||
'From: ' || v_From || crlf ||
'Subject: '|| v_Subject || crlf ||
'To: ' || v_Recipient || crlf ||
'MIME-Version: 1.0'|| crlf ||     -- Use MIME mail standard
'Content-Type: multipart/mixed;'|| crlf ||
' boundary="-----SECBOUND"'|| crlf ||
crlf ||
'-------SECBOUND'|| crlf ||
'Content-Type: text/plain;'|| crlf ||
'Content-Transfer_Encoding: 7bit'|| crlf ||
crlf ||
'some message text'|| crlf ||     -- Message body
'more message text'|| crlf ||
crlf ||
'-------SECBOUND'|| crlf ||
'Content-Type: text/plain;'|| crlf ||
' name="excel.csv"'|| crlf ||
'Content-Transfer_Encoding: 8bit'|| crlf ||
'Content-Disposition: attachment;'|| crlf ||
' filename="excel.csv"'|| crlf ||
crlf ||
v_message|| crlf ||     -- Content of attachment
crlf ||
'-------SECBOUND--'               -- End MIME mail
utl_smtp.Quit(v_mail_conn);
EXCEPTION
WHEN utl_smtp.Transient_Error OR utl_smtp.Permanent_Error then
raise_application_error(-20000, 'Unable to send mail: '||sqlerrm);
END;
Thanks,

Thanks for your help Billy.
I am able to segment the data but I am not getting any attachment instead segmented data is showing in the mail body.
Can you please have a look and let me where it is going wrong?
DECLARE
v_From VARCHAR2(80) := '[email protected]';
v_Recipient VARCHAR2(80) := '[email protected]';
v_Subject VARCHAR2(80) := 'test mail';
v_Mail_Host VARCHAR2(30) := 'localhost';
v_Mail_Conn utl_smtp.Connection;
crlf VARCHAR2(2) := chr(13)||chr(10);
v_message clob;
message clob;
BEGIN
v_Mail_Conn := utl_smtp.Open_Connection(v_Mail_Host, 25);
utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);
utl_smtp.Mail(v_Mail_Conn, v_From);
utl_smtp.Rcpt(v_Mail_Conn, v_Recipient);
v_message := 'date: ' || to_char(sysdate, 'DD-MON-YYYY HH24:MI:SS')||chr(10)||
'from: '||v_From|| chr(10) ||
'to: '||v_Recipient ||chr(10)||
'subject: '||v_Subject || chr(10) || chr(10);
utl_smtp.open_data (v_Mail_Conn);
utl_smtp.write_data(v_Mail_Conn , v_message );
--MIME header.
UTL_SMTP.WRITE_DATA(v_Mail_Conn,'MIME-Version: 1.0' || crlf);
UTL_SMTP.WRITE_DATA(v_Mail_Conn,'Content-Type: multipart/mixed;' || crlf);
UTL_SMTP.WRITE_DATA(v_Mail_Conn,' boundary="-----SECBOUND"' ||crlf);
UTL_SMTP.WRITE_DATA(v_Mail_Conn,crlf);
-- Mail Body
UTL_SMTP.WRITE_DATA(v_Mail_Conn,'-------SECBOUND'|| crlf);
UTL_SMTP.WRITE_DATA(v_Mail_Conn,'Content-Type: text/plain;' || crlf);
UTL_SMTP.WRITE_DATA(v_Mail_Conn,'Content-Transfer_Encoding: 7bit' || crlf);
UTL_SMTP.WRITE_DATA(v_Mail_Conn, crlf);
UTL_SMTP.WRITE_DATA(v_Mail_Conn, 'Please see the attachments' || crlf);
UTL_SMTP.WRITE_DATA(v_Mail_Conn, crlf);
-- Mail Attachment
utl_smtp.write_data(v_Mail_Conn,'-------SECBOUND' || crlf);
utl_smtp.write_data(v_Mail_Conn,'Content-Type: text/plain;' || crlf);
utl_smtp.write_data(v_Mail_Conn,'name="excel.csv"' ||crlf);
utl_smtp.write_data(v_Mail_Conn,'Content-Transfer_Encoding: 8bit' ||crlf);
utl_smtp.write_data(v_Mail_Conn,'Content-Disposition: attachment;' ||crlf);
utl_smtp.write_data(v_Mail_Conn,'filename="excel.csv"' ||crlf);
utl_smtp.write_data(v_Mail_Conn,crlf);
message := 'OBJECT_TYPE, OBJECT_FOREIGNKEY, OPERATION, EVENT_ID, STATUS_ID, NUM_BLOCKED, MODIFIED_DATE, INT_UPDATEEVENT_FMWID, ERROR_DESCRIPTION';
utl_smtp.write_data(v_Mail_Conn , message );
for rec in (
select object_type, object_foreignkey, operation, x.event_id, x.status_id, num_blocked,
e.modified_date, e.INT_UPDATEEVENT_FMWID, replace(substr(e.error_description,1,100),',',' ') error_description
from (
select b2.object_type, b2.object_foreignkey, t.operation, e2.event_id, e2.status_id, count(1) num_blocked
from EVENT e
INNER JOIN TRANSACTION t
ON e.transaction_id = t.transaction_id
inner join transaction_dependency d
on t.transaction_id = d.transaction_id
inner join transaction_block b
on t.transaction_id = b.transaction_id
inner join transaction_block b2
on d.transaction_id <> b2.transaction_id
and d.object_type = b2.object_type
and d.object_foreignkey = b2.object_foreignkey
inner join transaction t2
on b2.transaction_id = t2.transaction_id
and t.source_type = t2.source_type
inner join event e2
on t2.transaction_id = e2.transaction_id
where t.source_type = 'CRM_OD_To_OP'
and e.created_date >=(sysdate - 1)
and e.status_id <1000
and e2.status_id <1000
group by b2.object_type, b2.object_foreignkey, t.operation, e2.event_id, e2.status_id
) x
inner join event e
on x.event_id = e.event_id
and e.status_id = 900
order by num_blocked desc, object_type, object_foreignkey
) loop
message := crlf || rec.object_type||','||rec.object_foreignkey||','|| rec.operation|| ','|| rec.event_id||
','||rec.status_id||','||rec.num_blocked||','||rec.modified_date||','||rec.INT_UPDATEEVENT_FMWID||','||rec.error_description;
utl_smtp.write_data(v_Mail_Conn , message );
end loop;
utl_smtp.write_data(v_Mail_Conn,crlf);
utl_smtp.write_data(v_Mail_Conn,'-------SECBOUND');
utl_smtp.close_data(v_mail_conn);
utl_smtp.quit( v_mail_conn );
EXCEPTION
WHEN others then
dbms_output.put_line('error ' || sqlerrm);
END;

Can we send attachements with Idoc?

Hi ,
Can we send attachements with Idoc?

Hi,
1. in standard you cannot
2. you could however send it in a text field
and then combine in adapter or java proxy
on the other hand abap proxies work with attachments
in standard - check out my blog:
/people/michal.krawczyk2/blog/2006/04/19/xi-rfc-or-abap-proxy-abap-proxies-with-attachments
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Getting: Unable to send attachment with Mail Drop

Mail Drop is not working for me, I always get error message while trying to send.
Here is what happens:
-I compose a message that includes a large attachment
-I click send
-I get the message "Unable to send attachment with Mail Drop" for a few seconds
-My message is not sent and it goes into the Outbox folder.
Configuration:
OS X 10.10 Yosemite
Mail -> Preferences -> Accounts -> Advanced. The option "Send large attachments with Mail Drop" is selected.

I had the exact same problem. I finally figured out what was wrong. I believe you must have iCloud Drive turned on in System Preferences AND you also must allow mail to store document in iCloud Drive which you can check by clicking the "Options..." button in the preference pane of iCloud Drive. As you can see below.

Sending attachment with form

Anyone got a clue how to send an attachment with a mailform?
Thanks,
Danny

It's commercial, but does what you need:
www.formstogo.com
Quite a few people on this forum use it so comes highly
recommended.
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au
"Daluiso" <[email protected]> wrote in
message
news:f3mdp7$4hm$[email protected]..
> Anyone got a clue how to send an attachment with a
mailform?
>
> Thanks,
>
> Danny

Can we send attach with Inbound IDoc

Hi All,
I have requirement, Proxy to Idoc scenario where i need to send attchement along with Idoc message coming from proxy message. Can we do that?
Also, i have another requirement as , i have 2 receivers , one is soap and one is Idoc , i need to send payload to Idoc reciever and just attachment to SOAP which is coming from Proxy message. How to do this.
Please let me know. Thanks.
Vishal

HI Vishal
You cannot send attachment to IDOC but for SOAP you can.
Attachment from proxy cannot be accessed in mappings and has to be handled as attachment.
Thanks
Gaurav

Xpath error while trying to send attachment with email

Hi,
I was trying to execute the BPEL sample - SendingAttachementWithEmail, as given in the tutorials.
I had mapped the 'contentBody' in attachment[2] to
ora:readFile(bpws:getVariableData('inputVariable','payload',
'/client:SendEmailWithAttachmentProcessRequest/client:attachmentURI')
I have a file called "SOA.txt" in my C:\ (C drive).
I specified the following details in my 'initiate' screen
to - jcooper
subject - sample email
body - testing how to send email with attachment
attachmentName - SOA.txt
attachmentMimeType - multipart/mixed
attachmentURI - file:C:/SOA.txt
I got the following error while executing the process, can any one please tell me where I am going wrong. Are the values I am passing correct?
Error
XPath expression failed to execute.
Error while processing xpath expression, the expression is "ora:readFile(bpws:getVariableData("inputVariable", "payload", "/client:SendEmailWithAttachmentProcessRequest/client:attachmentURI"))", the reason is C:\SOA.txt (The system cannot find the file specified).
Please verify the xpath query.
What could be the problem with the xpath query.

Thanks for your suggestions, but it still does not work.
The following is the error I get when I enter
file:///c:/SOA.txt as my attachmentURI.
XPath expression failed to execute.
Error while processing xpath expression, the expression is "ora:readFile(bpws:getVariableData("inputVariable", "payload", "/client:SendEmailWithAttachmentProcessRequest/client:attachmentURI"))", the reason is c:\SOA.txt (The system cannot find the file specified).
Please verify the xpath query.
I followd the same steps as given in the tutorial 'SendEmailWithAttachment' available under the folder <BPEL_HOME>\integration\orabpel\samples\tutorials\SendEmailWithAttachment.

Problem sending attachements with gmail account on mail

Hello:
I have a lot of problems sending attachments with my gmail account using mail.
1. Attachments are not big.
2. I don't have the same problem with other non gmail accounts.
3. When ever I have this problem I go to gamil.com and I am able to send the attachment with no problem.
Any suggestions?
Thanks

No idea ?
Nemrod

Mail.app: I can't send attachment with "space" in filename

Hi.
I've this kind of problem. I think it is Mail.app problem. The mail isn't sent if the attachment's filename contains "space" (eg: "file name.pdf").
The same email is sent finw if I use Thunderbird with the same SMTP server (Leopard Server) and from the same machine.
If the recipinets in local (not relayed over internet) it works well. Otherwise the SMTP server tell me it have lost connection whith relay server (ISP SMTP server).
I've used Lotus domino Server as SMTP server with the same result.
If I cut the "space" (' ') in the attachment's filename Mail.app works fine as well.
HELP!
thanks.
P.S.: sorry for my english
Message was edited by: odolo
Message was edited by: odolo

There is a bug which causes the filenames of attachments with a space or an accented character in the name to have characters appended to the filename extension; it may be that it also sometimes stops the attachment from sending. But other people have reported problems with mails with attachments not sending regardless of the filename, so I think the next software update will see some fixes.
Meanwhile, don't use spaces!
AK

Quotations PCUI - Send Attachements with the Quotation-Smarforms

Hi Experts,
I've got a question concerning smartforms and attachments in the PCUI - Environment.
We've created a smartform in the quotation application and we starting sending this smarftorm with actions, that means if the Quotation is ready to send, we can choose sending via fax, e-mail or print it out with the actions. This works fine, but now we have the requirement to send all documents (normaly pdf - documents) of the quotation directly with the quotation-smartform (product-datasheet for example). Is this possible, do you have any experience in this topic?
We use CRM 5.0 - and Sapnetweaver 2004s portal...
regards
marc

Hello,
You can read the attachment of the Quatotation using the CRM document library functions and extract the content of the documents. After this this can be put as part of the smart form.
Starting point will to explore CRM document library CLDocument should give you some hints.
Raj

Problem send attachment with mail

Hello,
I'm coding a program which sends a mail with attachment to an external mail address. The system creates the mail and the attachment, bu the content of the attachment isn 't correct.
this is my code
REPORT Z_SEND_MAIL.
data: IS_DOCDATA type SODOCCHGI1,
IS_RECEIVERS type SOMLRECI1,
IS_RECEIVERS_COPY type SOMLRECI1,
IT_RECEIVERS type table of SOMLRECI1,
IS_CONTENT type SOLISTI1,
IT_CONTENT type table of SOLISTI1,
*500369789+
l_txt(255) type c,
lt_objpack TYPE TABLE OF sopcklsti1 WITH HEADER LINE,
lt_objhead TYPE TABLE OF solisti1 WITH HEADER LINE,
lt_objtxt TYPE TABLE OF solisti1 WITH HEADER LINE,
l_tab_lines TYPE i,
l_att_type LIKE soodk-objtp.
*500369789+
IS_DOCDATA-OBJ_NAME = 'MAIL'.
IS_DOCDATA-PRIORITY = 5.
IS_DOCDATA-OBJ_LANGU = SY-LANGU.
IS_DOCDATA-NO_CHANGE = 'X'.
IS_DOCDATA-OBJ_DESCR = SY-CPROG.
clear : IS_CONTENT, l_txt. "500369789+
move '123456789' to l_txt. "500369789+
* move IS_MESSAGE-LINE to IS_CONTENT-LINE. "500369789-
move l_txt to IS_CONTENT-LINE. "500369789+
append IS_CONTENT to IT_CONTENT.
*add receiver
IS_RECEIVERS-RECEIVER = '[email protected]'.
IS_RECEIVERS-REC_TYPE = 'U'.
append IS_RECEIVERS to IT_RECEIVERS.
lt_objhead-line = 'Test mail'.
append lt_objhead.
DESCRIBE TABLE lt_objhead LINES l_tab_lines.
CLEAR lt_objpack-transf_bin.
lt_objpack-doc_size = STRLEN( lt_objhead ).
lt_objpack-head_start = 1.
lt_objpack-head_num = 1.
lt_objpack-body_start = 1.
lt_objpack-body_num = 1.
lt_objpack-doc_type = 'RAW'.
APPEND lt_objpack.
l_att_type = 'TXT'.
DESCRIBE TABLE it_content LINES l_tab_lines.
READ TABLE it_content into is_content INDEX l_tab_lines.
lt_objpack-doc_size = ( l_tab_lines - 1 ) * 255.
lt_objpack-doc_size = lt_objpack-doc_size + STRLEN( is_content ).
lt_objpack-transf_bin = 'X'.
lt_objpack-head_start = 1.
lt_objpack-head_num = 2.
lt_objpack-body_start = 1.
lt_objpack-body_num = l_tab_lines.
lt_objpack-doc_type = l_att_type.
lt_objpack-obj_name = 'ATTACHMENT'.
concatenate 'Test' SY-DATUM+6(2) SY-DATUM+4(2) into
lt_objpack-obj_descr. "#EC *
APPEND lt_objpack.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = IS_DOCDATA
commit_work = 'X'
TABLES
packing_list = lt_objpack
* object_header = lt_objhead
contents_txt = lt_objhead
contents_bin = it_content
receivers = it_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
The attachment is a TXT, the content should be '123456789', but it is '1 2 3 4'.
Does anyone has an idea why he does this ?
thanks !

solved by a colleague

Send attachment with receiver SOAP adapter

Dear Guru's,
We have created a scenario SAP ERP (ABAP Proxy) -> PI 7.0 -> (Webservice) OSB.
In the ABAP Proxy have we attached a file (jpg). In the SXMB_MONI we see first the file (named attach), and second the MainDocument. It seem's this is the wrong sequence.
We tried to correct this with AF_Modules/PayloadSwapBean in the receiver SOAP adapeter, but it does not work.
There are blogs who tells about how to configure the parameters. We did it as follows:
AF_Modules/PayloadSwapBean swap1
AF_Modules/PayloadSwapBean swap2
swap1: swap.keyName = payload-name
swap1: swap.keyValue = attach
swap2: swap.keyName = payload-name
swap2: swap.keyValue = MainDocument
In the communication channel audit log the swap is processed succesfully, but we don't see nothing changing in the message sequence.
Can somebody please help me with this issue?
Kind regard,
Jeroen Jung

Hi Stefan,
The main thing at this moment is to change the sequence of the payload and attachement. PI puts the attachement first and than the payload and in that sequence the receiver application can't deal with it.
This is a multipart related message and in the header it refers to the image (image/jpeg) first instead of the payload (application/xml).
As you can see in the first message we have used PayloadSwap Adapter module in the receiver SOAP Communication Channel to change this sequence and in the Audit Log of the SOAP CC we can see that it does SWAP functionality succesfully but the result is the same and nothing happens.
Here below you can see the result of a http snapper grabber:
POST /EnterpriseContentManagement/ProxyServices/PS_EnterpriseContentManagement_v1 HTTP/1.0
Accept: */*
Host: localhost:8090
User-Agent: SAP-Messaging-com.sap.aii.messaging/1.0505
CallingType: SA
Content-Type: multipart/related; boundary=SAP_00e371ef-3ca3-11df-9503-001f2966194a_END; type="image/jpeg"; start="payload-9A6BAB4B2FE1273DE10000000A503151 @ sap.com"
Content-Length: 939196
SOAPACTION:
--SAP_00e371ef-3ca3-11df-9503-001f2966194a_END
content-id: payload-9A6BAB4B2FE1273DE10000000A503151 @ sap.com
Content-Type: image/jpeg
*********binary attachment data************
--SAP_00e371ef-3ca3-11df-9503-001f2966194a_END
content-id: payload-9B6BAB4B2FE1273DE10000000A503151 @ sap.com
Content-Type: application/xml
<?xml version="1.0" encoding="utf-8"?>
*********XML Message************
--SAP_00e371ef-3ca3-11df-9503-001f2966194a_END--
Do you have an idea how we can switch the sequence of payload and the attachment? Or why the SWAP functionality doesn't have any result?
Kind regards,
Danke
Jeroen Jung

Is there any way to send Attachements with Sender file adapter

Hi,
I am Using File to Proxy communication model. Is there any way I can use file attachments with Sender file adapter with communication protocol "FTP". Please on suggest this.
Regards,
Daniel.LA

Hi,
I think there is no Option with FTP Protocol to send the files as Attachments.
Try this
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
Regards
Seshagiri

How to use send attachment with workitem?

Hi,
I am invlolved in creation of workflow for Trip request.
Whenever the request is rejected, I am using the CREATE method of SOFM business object to create a document for entering the rejection reason. I want this document to be sent as attachment along with next step of the workflow which is sent to the initiator to make changes in the request.
I am able to create the document. But i am not able to see the document anywhere. Plz help me in this regard.
Thanks in advance,
Sivagami

Therez a standard method which will pop up a window to enter text and save. This will go as attachment to the next step.

Send attachment with BAPI_POEC_XML_SEND

Similar Messages

Maybe you are looking for