Send back to author issue in HCMFP with extended notification functionality

Hi,
We are using HCM Forms and Processes in our project .When the Form is sent back to author by the manager, author receives the email using extended notification functionality where the author clicks on the link provided in the notification email to open the form.Till here everything working fine, but when the author sends  the form again for approval with required changes , the approver  could not see the latest changes in the form. He still see the old data. Please note standard Task TS04000020: PD Form Is Edited Again by Author is used in the workflow.
We tried the same scenario, where author access the form through UWL, make necessary changes and send the form for approval. In this case,latest changes can be seen by approver without any issue.But, as per business we can not provide UWL and should use extended notification functionality only..
Please help in resolving the issue with extended notification functionality as early as possible.
Thanks,
Pavan.

Hi Viji,
Regarding your question.. here is the business requirement.
1. Author fills the HCM form , hit check and send button, so that workitem goes to approver's UWL.Author do not have portal, but performs this process from SAP GUI itself using the webdynpro link as shown below.
https://  pint01.xxx.net:8043 /sap/bc/webdynpro/sap/asr_pd_process_execute?sap-wd-configId=ZXX_PD_PROCESS_EXECUTE
2. Approver has buttons on the form to approve, reject or send back to author.
3. When author hits the "send back to author" button, the work item (task TS04000020) will be created for the author.
4. The notification email will be sent to author using the program SWN_SELSEN.The email contains a link as shown below to open, edit,check and send it again for approval.
https:// pint01.xxx.net:8043 /sap/bc/webdynpro/sap/asr_process_execute?WI_ID=000000052545
The problem here is, when the author makes changes and send the form for approval, the approver still see the old content only in the form.
Thanks,
Pavan.

Similar Messages

  • PRD Cutover - Replace RSWUWFML2 with Extended Notif framework SWNADMIN

    Hi Folks,
    We are using RSWUWFML2 to send out notifications for workitems in Production (PRD) environment.
    Now we have implemented Extended Notification framework (SWNADMIN) in Dev and we are happy with what we learnt so decided to discontinue RSWUWFML2 in PROD and replace it with SWNADMIN config and job SWN_SELSEN.
    From what I understand when I configure SWNADMIN in PROD and the SWN_SELSEN is run first time, it will send out one notification to every user who has pending work-items in their Inbox eventhough these users may already have received notifications for such items from existing program RSWUWFML2.
    How do we do this cutover (discontinue RSWUWFML2 with extended notif framework)? How do I make sure that any work-items that were already accounted for send by RSWUWFML2 will not be considered by SWN_SELSEN?
    Can I maintain a cutoff date in one of the  extended notification tables?
    our SWNADMIN settings - All items - Once a day / New and changed work-items - Once every 30 mins,/ reminders for any pending work-items - individual notification for every workitem (after initial collective notification) until workitem is completed
    I will appreciate any help.
    Saurabh

    Whether this is the best approach or not this is what I did.
    In SWNADMIN I deleted the SAP entry ALL (under Selections) (ALL_FULL and ALL_DELTA).  I then created my own Selection and then specified the tasks to send notifications for.
    Once I had created the custom selection (ZSELECTION) two entries were created (viewable in SWNCONFIG)
    1) ZSELECTION_ALL
    2) ZSELECTION_DELTA
    I removed the schedule for ZSELECTION_ALL and only the schedule for Delta remained. This way only new and changed tasks will be included in the SWN_SELSEN program.
    Then you can migrate the tasks at your discretion and remove the entries from RSWUWFML2 batch job on a case by case basis.
    Additionally dont forget you should setup the batch job program to delete notifications as well: RSWNNOTIFDEL

  • Help Needed With "Extend Marker" Function Not Working

    I have several Clips and used the "DV Start/Stop Detect" function to find the time code breaks, which seems to work well. I've now got a clip full of Segment markers.
    The problem arises when I try to use Extent Markers "Option + `" to make subclips. When I put the play head on a subsequent marker, the Marker/Extend function is grayed out.
    Extending a marker that I have created using the M key works perfectly.
    Why can I not use the Extend function on Segment Markers?
    Any help on this is greatly appreciated. I have 30 odd clips that I need to set up segments for, and doing it manually will add hours to my workload.
    Thanks
    Gary
    Dual G5 2.5 GHz Dual Core, 2.5 GB RAM, 500 GB HDD   Mac OS X (10.4.3)   Final Cut Studio FCP 5.0.4

    Thanks for the reply.
    I am completely aware of items 1 through 3, and never Extend markers in the Timeline. Only the Viewer.
    To perform an Extend Marker and avoid headaches, load the captured clip - the one with the video icon in the Browser - into the Viewer. Then, as you scrub along in the Viewer, Option-` as needed.
    That is precisely what I am doing.
    To Extend the marker I first double click the clip to load the entire clip into the Viewer, where all the Section markers are displayed. I then check Mark>Markers>Extend and the function is grayed out. However, if I move the playhead one frame prior to the Section marker, the previous Section marker extends to the frame prior to the new play head position.
    If I do this with manually entered markers (using the M key, creating Marker 1, 2, 3.... in sequence on the Viewer timeline), then the Previous marker is extended to the frame immediately prior the the current play head position - i.e. from Marker 1 to Marker 2. I do not have to move off the Marker 2 position to be able to extend Marker 1.
    Also, simply selecting all your Markers and either dragging them to another bin (or pressing Command-U) does not produce the needed subclips?
    Of this I am also aware. I find the Command-U process just confuses the issue, creating more clips to manage (others may disagree). I prefer to simply drag the "Subclips" directly from the Main clip into a Timeline.
    Because you're doing all this to get subclips, right? Or wrong?
    If I understand your reply correctly, I think you misunderstood my problem. I have been using subclips for several years, and find them VERY useful, especially with multi-camera shoots. So, I am quite familiar with creating and extending markers.
    I just started experimenting with the Detect feature and find it works quit well (most of the time). My problem is that the Segment markers created by the Detect process, do not perform the same as manually place markers, as far as the Extend marker function is concerned, anyway.
    BTW - By using the TC display in my Panasonic PV-GS400 Camera, and sending the FCP video via Firewire to the camera, the camera displays the TC on the captured clip, which I then rename the marker to for TC reference. As long as the Date/Time on the cameras are properly synced, syncing clips in the Timeline is a breeze!!
    Anyway, to clarify, my process is as follows:
    1. Capture a clip.
    2. Display the clip in the Viewer
    3. Select "DV Start/Stop Detect" and watch as the section markers appear in the Viewer.
    4. In Viewer, place play head on the first Section marker
    5. Press the M key to Edit Marker.
    6. Change the Name of the marker to the timecode of the Marker now displayed in the Camcorder window.
    7. Use Shift-Down Arrow to move to the next Section Marker
    8. Press Option+` to Extend the previous marker - which does not work and is grayed out in the Mark>Markers>Extend menu.
    9. Back to step 5.
    This process works perfectly with manually created markers. Because the Extend works if I move the play head one frame prior to the current Section marker, this tells me there is something "special" about the Section marker that disables the Extend function, unlike a manually created marker.
    BTW - If I delete the Section marker, and create a manual marker at the same frame, the Extend marker function works again. Again, indicating that Section markers are different somehow from manual Markers.
    Hopefully, this wordy explanation of my process clarifies my problem.
    Aside: The clips are supplied to me by a customer on a 500GB FW800 drive. FCP5 was used to capture the clips from the original Tapes (which I do not have access to). I am the editor for the project.
    Thanks again for the reply. It is greatly appreciated. If there is any other info that I have missed that will help figure this out, please let me know and I will post a response a quickly as possible.
    Gary

  • Is DIAdem script with Extended Classification functionality of DIAdem Professional executable by DIAdem Base?

    The Professional license adds 3D model data mapping and Extended Classification functionality to DIAdem. If I make a script that uses the 3D model data mapping functionality in DIAdem Professional it is possible to use this same script on a PC with only DIAdem Base (according to http://sine.ni.com/ds/app/doc/p/lang/nl/id/ds-263)
    Is this also true for the Extended Classification functionality? Is it possible to make a script with DIAdem Professional and execute this same script on a PC with only DIAdem Base to generate a report?
    Thanks,
    Roger

    Hi Roger,
    My understanding is that the VBScript you create that uses the extended classification function will work fine in DIAdem Base.
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • Does anybody have the issues of working with MemberAlias Text Function

    Hi,
    I am trying to use <<MemberAlias>> text function, but it seems is only works when I put my dimension on POV, but not on PAGE.
    My sytax is <<MemberAlias("Grid2", Current, "Company")>>, Company dimension is on Page, but it only gave me the membername like CO01, but I need MemberAlias Name. I checked Alias on Page properties.
    I tired Memberdescription text function, it does not work with Page either.
    I am at Hyperion Reports 9.3.1. Is it a bug? Any patch?
    Thanks!

    Yes, I can get the Alias name on the page drop down box, but not on my reference Name by using MemberAlias function.
    The purpose we want to use MemberAlias function is because the content from the drop down box is showing like one line of four dimensions information together like: CompanyA, Location01, Cost Center 007. Client want to break this one row into three static rows like:
    CompanyA
    Location01
    Cost Center 007
    So we are using MemberAlias name to do this, but FR give us only the membername. If there is any way can break the drop down content automatically, then we do not have to use MemberAlias function.
    Thanks in advance.

  • Problem with extended SQL functions in RTF Template

    Hello,
    I'm new to BI Publisher and I'm trying to create a new rtf template. I've created my layout and added fields without any problems, but I'm having trouble trying to insert calculations such as add,substract,multiply,divide, etc.
    Here is an example of what I'm trying to do:
    <?xdofx:STAFF_ASMT+100?>
    Where STAFF_ASMT is one of my fields. When I add this function all I get is the actual value from that field returned on the first page, and then on other pages I get the value plus an extra zero.
    So with my example data below I get: 6600 on page 1 and 51830 on page 2. Any ideas on what I'm doing wrong or if it is possible to do what I'm doing? Also, is it possible to add/substract/multiple two or more fields together?
    Something like this: <?xdofx:STAFF_ASMT+GROSS_INV?>
    I was going to add all of these functions to my SQL statement, but I have 30 or so calculations I want to perform in the layout and I don't want to have to write that all out in SQL.
    <ROWSET>
    <ROW>
    <STAFF_ASMT>6600</STAFF_ASMT>
    <GROSS_INV>0</GROSS_INV>
    </ROW>
    <ROW>
    <STAFF_ASMT>5183</STAFF_ASMT>
    <GROSS_INV>0</GROSS_INV>
    </ROW>
    </ROWSET>
    Thanks for your help

    When I tried that I get the following error message when I click the Validate Template option:
    [080609_031631893][][ERROR] [Line 162.184] Incorrect XPath: +
    And when I try to generate a PDF preview I get:
    java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at oracle.apps.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(Unknown Source)
         at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
         at oracle.apps.xdo.common.xml.XSLTWrapper.transform(Unknown Source)
         at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
         at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
         at oracle.apps.xdo.template.FOProcessor.createFO(Unknown Source)
         at oracle.apps.xdo.template.FOProcessor.generate(Unknown Source)
         at RTF2PDF.runRTFto(RTF2PDF.java:629)
         at RTF2PDF.runXDO(RTF2PDF.java:439)
         at RTF2PDF.main(RTF2PDF.java:289)
    Caused by: oracle.xdo.parser.v2.XPathException: Error in expression: './/+'.
         at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:806)
         at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:571)

  • Problem with Extended Notifications

    Hi Friends,,
    I'm attempting to set up Email Notifications for new workitems to deliver to user's Outlook inboxes.
    I configured the appropriate fields in SWNCONFIG .
    When I attempt to manually run report SWN_SELSEN I get the following message:
    Selection of Notifications
    00000 notifications selected
    00000 notifications deleted (logically)
    00000 new notifications saved
    00000 notifications saved
    Sending Messages
    00042 notifications selected
    00000 messages sent
    <b>Unable to send 00000 notifications due to errors</b>
    I ran program SWN_SELSEN_TEST.  I get errors "Error when creating message" but no futher details appear.
    Any ideas where to look?

    ah... after few days of trying, i found out the reason for my problem
    Some services in SICF is not activated yet. Refer to the URL below to activate those services.
    <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/27/9a793426cea749b18fa409565c3dee/frameset.htm">http://help.sap.com/saphelp_nw04s/helpdata/en/27/9a793426cea749b18fa409565c3dee/frameset.htm</a>

  • Why is my servlet sending back keepalives?

    One of our business partners is sending a POST request over https to my servlet. It's not through a browser. For some reason my server is sending back keepalives. It only happens with this one specific client. If I test this servlet from a browser that does not happen.
    I don't know the exact specifics of keepalives and maybe that's why I'm confused. Can someone enlighten me? Is it something I'm doing or they are doing?

    May be the version of HTTP used by this particular client is *1.0*. Verify the version being used.
    [http://java.sun.com/javaee/5/docs/api/javax/servlet/ServletRequest.html#getProtocol%28%29|http://java.sun.com/javaee/5/docs/api/javax/servlet/ServletRequest.html#getProtocol%28%29]
    Source: link
    Under HTTP 1.0, there is no official specification for how keepalive operates. It was, in essence, tacked on to an existing protocol. If the browser supports keep-alive, it adds an additional header to the request:
    Connection: Keep-Alive
    Then, when the server receives this request and generates a response, it also adds a header to the response:
    Connection: Keep-Alive
    Under HTTP 1.1, the official keepalive method is different. All connections are kept alive, unless stated otherwise with the following header:
    Connection: close
    The Connection: Keep-Alive header no longer has any meaning because of this.
    If I test this servlet from a browser that does not happen.All the modern browsers use HTTP 1.1. Configure the browser to use HTTP 1.0 and see the results.

  • Purchase Requisition with wrong details - Sending back to Originator

    Hi Experts,
    In SAP Purchase Requisition contents found incorrect on the stand of technical specification then buyer do not have provision to send back it through SAP to the originator (Design department) for correction.
    At present buyer are resolving such issues on the basis of Email. Till the time PR get corrected by originator it shows pending for action on buyer’s a/c .
    Hence considering above facts request to suggest us the method for sending the Incorrect PR line items to the originator through SAP.
    Regards,
    Shekhar Gaikwad

    Hi,
       Configure release strategy for PO at item level along with workflow. The release code can be the buyer and once the buyer found any error in the technical specification, he can reject the release, which will notify the creator.
       Refer the help doc: Workflow for Reject Purchase Requisition Item (SAP Library - MM - Materials Management: Workflow Scenarios)
    Regards,
    AKPT

  • Secure connection failed: The Certifying Authority for this certificate is not permitted to issue a certificate with this name. (Error code: sec_error_cert_not_in_name_space) PLEASE HELP ME!!

    I have gone to this website almost everyday for years and I have not changed anything in my internet settings, but now I'm getting this message: secure connection failed: The Certifying Authority for this certificate is not permitted to issue a certificate with this name. (Error code: sec_error_cert_not_in_name_space) The only thing I KNOW I did differently, was I installed a CAC reader to my computer, since then, this has been happening. Is there a setting I can change?? E-mail is: [email protected] Thanks! Megan

    There were recently several users getting this error code who use AVAST 2015. If you recently got that program, please see:
    * [https://support.mozilla.org/questions/1029578 Can NOT access https://www.google.com for google voice, mail etc.]
    * [https://support.mozilla.org/questions/1028985 Avast Forum connection failed - works in Chrome etc.]
    * [https://support.mozilla.org/questions/1028190 Since last FF update I can't sign out of Yahoo and when I close FF it tells me it has crashed.]

  • My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Tim

    My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Time machine failed. I have two powered 12V USB
    routers that are plugged into a 550VA CyberPower surge protector. I often receive these insufficient USB power for devices messages a dozen times even when I do not have devices like camera, Ipad, Ipod, and Tascam digital audio recorder plugged in. Is there a way to troubleshoot these USB routers or should I consider that one of the routers may be defective and replace them?
    David

    My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Time machine failed. I have two powered 12V USB
    routers that are plugged into a 550VA CyberPower surge protector. I often receive these insufficient USB power for devices messages a dozen times even when I do not have devices like camera, Ipad, Ipod, and Tascam digital audio recorder plugged in. Is there a way to troubleshoot these USB routers or should I consider that one of the routers may be defective and replace them?
    David

  • Is there an issue going on with the iPhones? And iPads? I cannot send text pics.  I can't get on Facebook, and I can't get on anything that uses Facebook ex Slotomania.  This has been going on for a few days!!!  It is happening with and without upgrades.

    Is there an issue going on with the iPhones? And iPads? I cannot send text pics.  I can't get on Facebook, and I can't get on anything that uses Facebook ex Slotomania.  This has been going on for a few days!!!  It is happening with and without upgrades.

    Contact facebook to address the facebook issues.

  • Hi ! I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an Apple's USA e.mail i can use ? Thanks.

    Hi ! I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an Apple's USA e.mail i can use ? Thanks.

    There is a link at the bottom of this page. http://www.apple.com/contact/

  • Good morning. I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an e.mail i can use in Apple USA? Thanks.

    Good morning. I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an Apple's USA e.mail i can use ? Thanks.

    There is a link at the bottom of this page. http://www.apple.com/contact/

  • Which email or which phone no. i can contact with apple after-sale service center? I need to send back to amend or replace!

    my new iphone 4S was bought from las vegas only for 1 month.And it is with serious quality problem, battery did not work and has liquid came out,Now i am in china, what phone no. or which mail i can contact with apple after-sale service center? I need to send back to US to amend or replace.
    All of the guys in apple now told me that it is not worldwide guarantee,which is different from the promise when i bought,i am disappointed!!!
    I need your help to tell me how i can contact with them and where i can send back the iphone to amend.

    The only email I have ever comes across for complaints would be [email protected] (it is not mis-spelled).  I don't know if it is still of use.
    Chat is going to be your only option for getting help, and you shouldn't be surprised if they don't offer help due to your product no longer being supported (sad but true).
    If you had not mentioned that you have an email confirming you registered (double-check that) I would have told you that you probably did not purchase thru Adobe and never registered it so they have no record of you owning it.  They do not email serial numbers for disc purchases - they are provided with the discs as you were told in chat.

Maybe you are looking for