Send Bid invitation to Email and Fax
Hi,
I would like to know if is it possible to send the bid invitation to the vendors via Email and Fax.
I'm looking in the PPF administration (transaction SPPFCADM) at condition configuration but i'm kidda lost....
can someone help?
Thank you,
Joseph
Hi,
Pls see the foll related threads:
email on bid invitation publication
Email on Bid Invitation publication
Re: Bid Invitation Email Subject
Re: Bid invitation email content text modification
Re: email on creation/change of bid invitation and auction
Re: Bid invitation email content text modification
BR,
Disha.
Pls reward points for useful answers.
Similar Messages
-
To send smartform output through email and fax
Hi,
I need to send smartform output through email if the email address is present else if the email address is present then it has to be sent through fax.If both the email address and fax are present,then it has to send an email.
Now the issue is I am able to send the email and I am getting the message as 'Output was successfully issued'.But the entry corresponding to this is not shown in SOST transaction.
Can anyone tell me what would be the reason for this?HI,
Try to look in transaction SCOT
Regards,
Egle -
Sending Adobe forms through Email and Fax
Hi ,
I have created an Adobe Form i.e. PO Form,
whose print/driver program is customised / based on SAPFM06P and routine used is ADOBE_ENTRY_NEU.
So , now I use the transaction ME22N and use the External Send option i.e sending Email , but the Email is getting sent to Spool instead of SOST.
So what changes do I need to make .
Can anyone tell me how do we send an Adobe Form through email * in which routine is based on Adobe_entry_neu .
Thanks in advance,
RohitHi,
Thanks for reply
The link u mentioned utilises Objects.. but can we send internet mail using this?
As we cannot change RECIPIENT TYPE in this case in the object.
I used this format in the program but the attachment is going to EXpress inbox. and goes to my SAP Inbox instead of Email .
So what changes we need to do for this.
Alternatively, can we use FM 'SO_NEW_DOCUMENT_ATT_SEND_API1' for this purpose?
Edited by: Rohit Pareek on Feb 3, 2009 3:36 PM -
We are moving from optio to xml publisher.
We were able to send the pdf to printer using pasta. I have no clues how to send the output to Email and Fax server.
Any pointers in that direction would be appreciated.
Thanks in advance,
SumanWe are moving from optio to xml publisher.
We were able to send the pdf to printer using pasta. I have no clues how to send the output to Email and Fax server.
Any pointers in that direction would be appreciated.
Thanks in advance,
Suman -
Hi ,
how can we send a form output as email and fax ? How to do the config for this? Can you explain the process to be done?
Rama.Hi,
See following code :
REPORT zmail_att NO STANDARD PAGE HEADING LINE-SIZE 200.
DATA : BEGIN OF ITAB OCCURS 0,
PERNR LIKE PA0001-PERNR,
ENAME LIKE PA0001-ENAME,
END OF ITAB.
DATA: message_content LIKE soli OCCURS 10 WITH HEADER LINE,
receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
listobject LIKE abaplist OCCURS 10,
compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
w_object_hd_change LIKE sood1,
compressed_size LIKE sy-index.
START-OF-SELECTION.
SELECT PERNR ENAME
INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM PA0001
WHERE PERNR < 50.
LOOP AT ITAB.
WRITE :/02 SY-VLINE , ITAB-PERNR, 15 SY-VLINE , ITAB-ENAME, 50
SY-VLINE.
ENDLOOP.
Receivers
receiver_list-recextnam = 'XXXXX@X...'. --> EMAIL ADDRESS
RECEIVER_list-RECESC = 'E'. "<-
RECEIVER_list-SNDART = 'INT'."<-
RECEIVER_list-SNDPRI = '1'."<-
APPEND receiver_list.
General data
w_object_hd_change-objla = sy-langu.
w_object_hd_change-objnam = 'Object name'.
w_object_hd_change-objsns = 'P'.
Mail subject
w_object_hd_change-objdes = 'Message subject'.
Mail body
APPEND 'Message content' TO message_content.
Attachment
CALL FUNCTION 'SAVE_LIST'
EXPORTING
list_index = '0'
TABLES
listobject = listobject.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
compressed_size = compressed_size
TABLES
in = listobject
out = compressed_attachment.
DESCRIBE TABLE compressed_attachment.
CLEAR packing_list.
packing_list-transf_bin = 'X'.
packing_list-head_start = 0.
packing_list-head_num = 0.
packing_list-body_start = 1.
packing_list-body_num = sy-tfill.
packing_list-objtp = 'ALI'.
packing_list-objnam = 'Object name'.
packing_list-objdes = 'Attachment description'.
packing_list-objlen = compressed_size.
APPEND packing_list.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = w_object_hd_change
object_type = 'RAW'
owner = sy-uname
TABLES
objcont = message_content
receivers = receiver_list
packing_list = packing_list
att_cont = compressed_attachment.
Reward points if helpful.
Regards.
Srikanta Gope -
Hi,
Does anyone have any idea about how a adobe form(tcode-SFP) can be sent through email and fax?
I have created an interest form and have to send it accross to the customer maintained in the customer master when i run transaction code FINT.
Help will be highly appreciated.
Regards,
Rasika
Moderator Message: There is a seperate forum for Adobe Interactive Forms. Please post your question there.
Edited by: kishan P on Nov 2, 2010 11:26 AMHi,
Thanks for reply
The link u mentioned utilises Objects.. but can we send internet mail using this?
As we cannot change RECIPIENT TYPE in this case in the object.
I used this format in the program but the attachment is going to EXpress inbox. and goes to my SAP Inbox instead of Email .
So what changes we need to do for this.
Alternatively, can we use FM 'SO_NEW_DOCUMENT_ATT_SEND_API1' for this purpose?
Edited by: Rohit Pareek on Feb 3, 2009 3:36 PM -
I just got the new Iphone 5 and when I send a message in a group text it keeps sending it as an email and as my phone number. The people in the group text are complaining that it is creating a new group message everytime I text. How do I fix this?
Read http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
If you wish to share an Apple ID with family members then read: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/ -
Hi guys,
We want to end the sapscript thru email and fax. Can you help us how we can do that?
The sequence should be, the sapscript will first be converted to PDF file before ending thru mail.
Thanks a lot for all the help.
Rgds,
MarkThanks Eswar,
I am already successful with my pdf file,,, I am not sure what would I introduce to 'SO_DOCUMENT_SEND_API1' parameters for it to be successful...
I have the sample code below:
data: i_otfdata type STANDARD TABLE OF itcoo WITH HEADER LINE,
i_pdfdata TYPE STANDARD TABLE OF tline WITH HEADER LINE,
i_itcpp TYPE STANDARD TABLE OF itcpp WITH HEADER LINE.
data: i_docs type STANDARD TABLE OF docs WITH HEADER LINE,
v_len type i.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT = i_itcpp
TABLES
otfdata = i_otfdata
EXCEPTIONS
unopened = 1
OTHERS = 2.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
EXPORTING
USE_OTF_MC_CMD = 'X'
ARCHIVE_INDEX =
IMPORTING
BIN_FILESIZE = v_len
TABLES
otf = i_otfdata
doctab_archive = i_docs
lines = i_pdfdata
EXCEPTIONS
ERR_CONV_NOT_POSSIBLE = 1
ERR_OTF_MC_NOENDMARKER = 2
OTHERS = 3
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data =
PUT_IN_OUTBOX = ' '
SENDER_ADDRESS = SY-UNAME
SENDER_ADDRESS_TYPE = 'B'
COMMIT_WORK = ' '
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
SENDER_ID =
tables
packing_list =
OBJECT_HEADER =
CONTENTS_BIN =
CONTENTS_TXT =
CONTENTS_HEX =
OBJECT_PARA =
OBJECT_PARB =
receivers =
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8 -
when i go to buy a app or music it tells me to enter verify in me and i dont know it and send it to my email and it does not go to my email?
Try here...
http://www.apple.com/support/mac/app-store/ -
My iphone is sending message from my email and not my number. how do i change this?
My IPhone is sending messages from my email and not my number. how do i change this?
Thankyouis something which imessage does to safe you money so when you send an sms while having a internet connection it send it across the Internet because thats free vs. a sms which cost pr send sms
-
My iMessage send messeges from my email and not my number
My iMessage only lets me send messages from my email and not number .... I just updated to iOS 7. Any suggestions
Try turning iMessage off and back on again. That usually fixes it. Note, however, that heavy server loads my delay the reactivation.
-
Create and Send Bid Invitation
Hello,
Newbie here, so thanks in advance for any help. We are in design phase and trying to figure out what's feasible or not. We want to automatically create a bid (RFQ) from an approved SC item. We then want to send this bid (RFQ) to our middleware (egate). Here are my questions:
(1) Can I create a bid in SAP EBP from the SC item, without setting up the Bidding Engine?
(2) Is creation of bid in SAP EBP, the same concept in R/3 backend, that is, I can view it via ME43 and it's stored in EKKO?
(3) Found several FM, what is the diference between BBP_PD_BID_CREATE and BAPI_BIDEC_CREATE? Which one should I use for our purpose in (1) above?
(4) Then, there is the BADI, BBP_CREAT_RFQ_IN_DPE...this seems to be a user-exit connected with the Bidding engine, allowing the developer to change the bid?
(5) How can I send the bid (RFQ) automatically to the middleware within SAP EBP in XML format? Is this feature available in one of the FM in (3) above?
Thank you.
Regards,
IreneHi Irene Yu,
Good Quesitons. I will try to answer what i can.
1. You can create a Bid Inv in SAP EBP from the SC item. You do not set up Bidding Engine separately. It is part of EBP, you just need to enable the Sourcing/Bidding transactions, Assign Roles and Authorizations.
It is LAC, SUS, CCM, those are setup separately.
2. Creation of bid in SAP EBP, One part of RFQ functions, as the same concept in R/3 backend, but have much features than what you do in R/3.
3. The diference between BBP_PD_BID_CREATE and BAPI_BIDEC_CREATE.
BBP_PD_BID_CREATE is used as parf of Bidding Functions, not an interface.
BAPI_BIDEC_CREATE is an interface. You are trying to create Bid Invitation from external system, you should consider this interface.
4. Yes, there is the BADI, BBP_CREAT_RFQ_IN_DPE...this seems to be a user-exit connected with the Bidding engine, allowing the developer to change the bid inviatation in the background, Like other Doc Change Methods in BBP_DOC_CHANGE_BADI.
5. How can I send the bid (RFQ) automatically to the middleware within SAP EBP in XML format? Is this feature available in one of the FM in (3) above? - I am sorry i do not understand this question.
Regards,
Jay -
Bid Invitation Table Names and Field Names
Dear All,
We are implementing SRM 5.0 and we have a requirement of creating Interface for Loading data from R/3 to flat file or database and then in to BW.I am new to SRM module.I hope You will help me in finding out following fields technical name and table name corresponding to the fields.
Bid invitation name-
Bids required for all items-
Detailed Price Information-
display weighting to Bidders-
DOTP-
Email-
End Date(Tender)-
EPPU Minimum Financial category-
EPPU supply head-
EPV-
Fax-
Final Indictor-
Follow -On-Document
Frame work agrement Number-
GPA item Category-
GST Indicator-
Item category-
Line Type-
MPN-
MPN Indicator-
MSD Clearence-
Negotiation indicator-
Offer Validity-
Tender opening date-
PC end date-
phone-
Pr Item No-
Procument nature-
Procument type-
Product-
Product category-
Target quantity of bid invitation-
target value of bid invitation-
tech spec by indicator-
tender box number-
tender classification-
tender open date-
text fields
Thanks in advance.
Regards,
MeeraHello,
You can go to transaction BBP_PD and choose Object type BUS2200 (for Bid Invitation) and click on Run button (or F8). Next, click or any searched document. In document display You can click on header or item, partner etc. and You get list of all used tables and fields.
Regards,
Marcin Gajewski -
I have the following query....
Working currently on BI7.0 and the reports are currently on the Enterprise Portal of client.
I want to execute the query on the EP and send the output directly onto several email ids and fax them.
How can i do the same without using Information BroadCasting in BI7.0
Regardsinformation broadcasting cannot be used as part of specification document.
Regards -
How to send smartform as an email or fax
Hi Friends,
Problem is i am getting smartform output, but how to send the output as an email or fax( say for ex it should be sent to vendor). Also kindly explain how to convert smartform to PDF output. Thanks in advance.Hi,
The below sample code is for 4.6C.Try this out.
Kindly reward points by clicking the star on the left of reply,if it helps.
Internal Table declarations
DATA: i_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
i_tline TYPE TABLE OF tline WITH HEADER LINE,
i_receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
wa_objhead TYPE soli_tab,
w_ctrlop TYPE ssfctrlop,
w_compop TYPE ssfcompop,
w_return TYPE ssfcrescl,
wa_doc_chng typE sodocchgi1,
w_data TYPE sodocchgi1,
wa_buffer TYPE string,"To convert from 132 to 255
Variables declarations
v_form_name TYPE rs38l_fnam,
v_len_in LIKE sood-objlen,
v_len_out LIKE sood-objlen,
v_len_outn TYPE i,
v_lines_txt TYPE i,
v_lines_bin TYPE i.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZZZ_TEST1'
importing
fm_name = v_form_name
exceptions
no_form = 1
no_function_module = 2
others = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
w_ctrlop-getotf = 'X'.
w_ctrlop-no_dialog = 'X'.
w_compop-tdnoprev = 'X'.
CALL FUNCTION v_form_name
EXPORTING
control_parameters = w_ctrlop
output_options = w_compop
user_settings = 'X'
IMPORTING
job_output_info = w_return
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
i_otf[] = w_return-otfdata[].
call function 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = v_len_in
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
others = 4.
Fehlerhandling
if sy-subrc <> 0.
endif.
loop at i_tline.
translate i_tline using '~'.
concatenate wa_buffer i_tline into wa_buffer.
endloop.
translate wa_buffer using '~'.
do.
i_record = wa_buffer.
append i_record.
shift wa_buffer left by 255 places.
if wa_buffer is initial.
exit.
endif.
enddo.
Attachment
refresh:
i_reclist,
i_objtxt,
i_objbin,
i_objpack.
clear wa_objhead.
i_objbin[] = i_record[].
Create Message Body
Title and Description
i_objtxt = 'test with pdf-Attachment!'.
append i_objtxt.
describe table i_objtxt lines v_lines_txt.
read table i_objtxt index v_lines_txt.
wa_doc_chng-obj_name = 'smartform'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'smartform'.
wa_doc_chng-sensitivty = 'F'.
wa_doc_chng-doc_size = v_lines_txt * 255.
Main Text
wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + strlen( i_objtxt )
clear i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
append i_objpack.
Attachment
(pdf-Attachment)
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
Länge des Attachment ermitteln
describe table i_objbin lines v_lines_bin.
read table i_objbin index v_lines_bin.
i_objpack-doc_size = v_lines_bin * 255 .
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'smart'.
i_objpack-obj_descr = 'test'.
append i_objpack.
clear i_reclist.
i_reclist-receiver = [email protected]'.
i_reclist-rec_type = 'U'.
append i_reclist.
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
TABLES
packing_list = i_objpack
object_header = wa_objhead
CONTENTS_BIN = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
Maybe you are looking for
-
What do i need to use my mac as a tv
i want to put my mac in the kitchen and get rid or the tv i have there. is it possible to run my directv into it and us it as a tv also?
-
In FBL1N system not showing W/tax exempt amount.
Hi, In FBL1N system not showing W/tax exempt amount. Regards, Nilesh Surve.
-
Need help with upgrading my OS from 10.5.8
Need help with upgrading my OS. I havent upgraded the OS since I bought it and have version 10.5.8. Now I cant download Mountain Lion- or even Snow Leopard. When i downloaded the first version of SL- 10.6.1 it says i have to have 10.6 first and I can
-
File upload and download using secure connection ??
hi, i have to transfer file from clinet machine to server. so, actually my need is, client submit form , then that file will go to url like "www.abc.com/ " server receives and store data in database and after that sends new file to that client but al
-
IMac 27 DisplayPort Input - Which Application?
I'm new to mac. I understand that I will need a DVI to DisplayPort converter box to view my cable box output on my iMac 27 screen. My question is how do I actually access the DisplayPort input? Is there an application I need to open? Will the iMac au