Send button grayed out after Snow Leopard

Install was successful. I followed the instructions for changes to mail to enable sending and receiving. Did tests on all mail accounts and mail sent. Now, when I go to new message, the send button is grayed out and I can't proceed. Anyone have a fix?

Ernie,
Not sure what happened as everything tested just fine after installation. But I did go back into preferences to find that the outgoing SMTP had switched to "none." I changed that and it now works. Thank you for your help.

Similar Messages

  • ICloud email won't send (it tries to send and then freezes, send button grayed out)

    I can recieve email just fine. I can draft an email just fine. But it won't send.  When I hit the send button, the email window goes away and a message box appears and disappears so fast I can't read it.  The email window reapears with the "send" button grayed out.  Once this happens, I can't close the email window.  I have to quit mail.  When I open mail back up, the email will still be there and I can close it.  The send button is no longer grayed out, but if I hit send, the same thing happens (i.e., screen flashes and the send button is grayed out).
    I've tried deleting the acouunt and reforming it.  Didn't help.  I checked to see that my outgoing server is "iCloud" and that it send on port 993 and the SSL check box is checked. 
    Any ideas?

    I'm having the exact same problem on one of my Macs but no the other.
    Did you ever get this resolved?

  • Stop button grayed out after a new instance is launched

    The stop button gets grayed out after a new instance is launched.  Could someone please help me out?  Just a screenshot reply will do just fine since I'm still using v8.6.  Thanks.

    VTKim wrote:
    Hi lavalava,
    I have looked over your VI and tried to run it and while I can run your VI and get the same error, when I try to recreate it in a new VI, I cannot recreate the issue.  The only difference between your test.vi and mine is that I am not calling the Xcontrol. I am calling the same set of 4 random number generators and putting them into a cluster, but I am not referencing the RNG cluster.  I think this is where the issue lies and it is possible that you Xcontrol is corrupt.  While I could find the Data 2 that shows up in the test.vi, I couldn't find the image.vi  Where are you calling the image.vi? 
    Also, have you tried developing your program on a different operating system?  LabVIEW is not supported on Windows XP 64 bit, and while it seems to operate fine in most cases, there are definitely a few instances that will have unexpected behavior in the XP 64 bit environment.  Thanks!
    Kim W.
    Hi, Kim.  It sounds like you were never able to run the attachment to see the actual problem.  This is simply a drawing issue with Labview.  I have already tried this on XP x64, XP x32, Vista x86, Vista x64, and 7 x86.
    The image.vi is inside "RNG" folder.  All the files you needed to run the simulation should be included in that attachment above.
    Thanks

  • Epson Print CD  print button Gary out / W, snow leopard - please help.

    please help. after download snow leopard epson print CD is not working. i deleted all epson software from my application and download new epson software from their website. 10.6 and i was trying to use epson print cd ver2.0 and print button is gray, so i can't able to print cd... i restarted my computer. and i did update print information from epson print cd. is there way i can use this new epson print cd with my snow leopard? anybody out there have some information? thank you very much!

    Hi
    I had the same problem with my MB Pro and an Epson Stylus Photo PX700W printer after upgrading to snow leopard.
    I got onto Epson tech support and was advised to do the following (which worked by the way!)
    1) Delete the Epson printer from the "Print & Fax" utility in the "System Preferences"
    To do this, open "Print & Fax" and choose the epson printer in the left hand pane under "printers".
    Then hit delete
    2) Go to the Epson support site and download the latest drivers for your printer
    URL = http://www.epson.co.uk/support
    3) Enter your printer type and on the following page choose "drivers and software"
    4) I personally downloaded the driver plus the Print CD application although I believe it may have been the same version as the one I already had installed.
    5) Once the driver package is downloaded use the installer and install as normal
    6) Once installed go back into "Print & Fax" and choose the + button under the printer left hand pane to choose a new printer.
    In my case the printer was found on wifi using bonjour and I just chose it
    7) launch the "Print CD" app and try to print
    In my case all the options that had been greyed out had returned and I was once most able to print to CD/DVDs
    I hope this helps

  • Send button grayed out

    Hi,
    I went to respond to an email today in Apple's Mail program and am not able to send the email. I am using my mobileme account. Basically I hit "Reply", write my email, and the go to press "Send" but the button is grayed out and inactive. I have never experienced this before so I am a bit puzzled. Mail is receiving emails still and is saving drafts locally that are syncing online so it does not appear to be a connection issue.

    OK...I believe I have resolved the issue. My Mobileme SMTP server info disappeared. What would cause this information to disappear overnight?

  • Can't send text message--Send button "grayed out"

    When texting about 70% of the time the send button is grayed out. I've checked to make sure the recipients phone # has the area code.
    I have to retype the message several times and with no rhyme or reason that I can discern it's finally sendable. I've reset the phone
    and sometimes that works. I called  the genious line and was told basically "it's a bug" --not a great answer. Same thing happened on my 3gs
    Any thoughts on the matter?

    My iphone 4 does the same thing. I keep exiting text messages and then reopening and typing the first letter of my text to see if the send icon will whiten from the grey. Really a pain and waste of time. I thought I would look around here for a solution before making appt with the apple store.

  • Why is the send button grayed when sending a message from contacts on my I pad

    Why is the send button grayed out when trying to send a message from contacts using my I pad

    Stick with one post at a time. Otherwise, it gets very confusing.
    https://discussions.apple.com/message/18529200#18529200

  • Text messages in Safari are garbled on Mac Pro after Snow Leopard install

    When reading or composing my Yahoo mail text messages in Safari on my Mac Pro after Snow Leopard, the wording is very garbled. Looks like o's, s's, c's, some caps, with lots of spaces intermixed. Messages look ok on Firefox, on same machine. New messages and reading sent messages look ok on my MacBook and MB Air. When cutting and pasting into something else (like this window), the text looks fine. I can compose and send messages that look garbled, but the right words and letters go out. HTML messages look ok. Any clues for solution?

    I have this happening in bunch of different HTML pages. Here's a screenshot of the same page in Safari (Version 4.0.3 (6531.9)) and Mac OS X 1.6.1 side by side with Camino:
    https://dl.getdropbox.com/u/362958/miscwebimages/Screen%20shot%202009-09-22%20at%2018.35.47.png
    Camino renders the page correctly. Safari is really unusable with this problem. Tried switching to and from 64-bit mode in Safari, didn't help either.
    Message was edited by: Attila Szegedi

  • Why Are My Text Align Buttons Grayed Out?

    My users are unable to center text when edited pages in CS3 and CS4. The standard paragraph alignment buttons are grayed out.
    All the users of my site have Admin role, and I have set up the role to allow unrestricted editing. And "Allow Users to Apply Styles"... At screenshot of some of my settings is attached. I don't see why Contribute is not allowing this basic element to work.
    Why Are My Text Align Buttons Grayed Out?
    Any help would be greatly appreciated.

    I experienced the very same issue, but found an interesting quick-fix that worked for us.
    Several of my webpage content managers reported that they could not change the text alignment in pages created using Dreamweaver nested templates. We use nested editable regions in order to restrict portions of the pages (i.e. banners and navigation menus) from being edited.
    I found that Contribute CS4 could realign text in some parts of the affected pages, but not others.
    Further exam revealed that Contribute could change the alignment on any text that was inside a table on those pages. If I inserted a table and then cut-n-pasted the problem text into the table, the text lost its style/formatting, but it could then have its alignment changed.
    Any text not inside a table could not have the alignment changed by Contribute and changing its style/formatting made no difference.
    One note though: It was interesting that after pasting the text into a table, if I selected a chunk of text, the alignment buttons grayed out again. However, if I simply clicked on the line of text (did not select it), the buttons remained active and the text alignment could be changed.
    I don't know why it is happening. The nested regions were working fine, or so I thought, until recently.
    The above is a quick-fix and got my page content managers back online, but I'm still searching for a long-term solution if anyone has one.
    Good luck...
    GaryC3706

  • MPEG-2 Playback not working after Snow Leopard upgrade

    Something I need all the time is MPEG2 playback in Quicktime and to ability to convert from MPEG2. in MPEG Streamclip.
    What I have found out is Snow Leopard deletes the file in library/quicktime when you install.
    I have followed the instructions to go back in the time machine, get the file, restore it back into the library/quicktime file
    Done all that, rebooted etc....still nothing
    I have also found the quicktimeMPEG2 components installer and that doesn't work either
    I desperately need this to work as my business relies on it.
    Any help appreciated
    Cheers
    Paul

    What error message do you get with the dmg installer? I have just tried an MPEG2 file, after upgrading to SL, QT reported it required the meg2 component. I found the original dmg file I purchased and it installed OK and works with QT 10.
    Before trying to install again it may be worth repairing permissions on you disk.

  • I/O field grayed out after check box checked ( Dynpro)

    Hi ,
    I have dynpro  dialog screen  with several check boxes linked with input/output field
    When check box is checked the I/O field is editable when check box is empty I/O field should be grayed out.
    I am trying to find the way how checking the check box can trigger the change of attribute of I/O field.
    The IO field should be gray out after checking check box without hitting enter or any other button.
    Please advice
    Chris

    Hi ,
    Thank you for your answer. I was missing Functional code of my check boxes.
    Now i have still issue my I/O field do not turns in gray ( only output) In loop
    I dide like you said ( this is example from my PAI module user-command)
    when 'CB1'.
          loop at screen .
            if screen-name = 'LT_FORMAT_IO'
              and lt_format_cb is initial.
              screen-input = '0'.
              screen-invisible = '1'.
              modify screen.
            endif.
          endloop..
    Once screen is displayed again , the IO field stll remains non grayed out.
    Please advice
    Chris

  • Isight no longer works after snow leopard upgrade

    my isight no longer is available directly after snow leopard upgrade on my macbook black. Anyone else with the same problem? The isight does not show up in 'about this mac' under USB and I tried resetting SMC and PRAM.

    Hi,
    In Leopard there was an App called iSight Update app that was in Hard Drive/System/Library/Core Services
    This does not seem to be there in Snow Leopard.
    An issue with some computers with the camera was that in System Preferences > Displays the Colours needed to be set to Millions.
    Also check the Hard Drive/System/Library/Extensions folder and see that you have the Apple_iSight.kext (this is likely to handle the Internal iSights as well).
    One last thing.
    Some Web sites can make use of the camera using Flash.
    If that tab is still open the Browser may have use of the camera.
    It sounds like you have done computer restarts and this will not be the case unless the browser is set to go back to that page.
    7:26 PM Sunday; August 30, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • HP Photosmart C6300 printer/scanner not working after Snow Leopard install

    HP Photosmart C6300 printer/scanner not working after Snow Leopard install
    Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

    Keith,
    I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

  • Wifi problems since 10.5.8 Update. Even after Snow Leopard Upgrade.

    Wifi problems since 10.5.8 Update. Even after Snow Leopard Upgrade.
    Is there any way to use a 10.5.7 wireless .kext files on Snow Leopard? And where can I find the files?

    Ok, I have the fix!! After several frustrating days it finally just works.
    The process:
    Upgrade your Macs to 10.6 (Snow Leopard)
    Powercycle your modem AND time capsule / airport TWICE
    Reset your time capsule with a pin or paperclip on the back
    Follow the prompts to setup your time capsule / airport access
    -- On your Macs
    Go to System Preferences > Network > Airport > Advanced > TCP/IP
    Click "Renew DHCP Lease" then click "Ok"
    Click Apply
    Turn off Airport
    Turn Airport on
    IT WORKS!!!
    One of the magical people at tech support walked me through it earlier today. The whole process took about 1.5 hrs because Show Leopard takes about an hour to install on one machine.
    Hope this helps-
    Joshua

  • Call Button Greyed Out After A Third Participant Is Added to The Conversation in Office Communicator 2007 R2

    Hi there,
    I have a problem with the office communicator. I'm able to make a call to one party without any problems. The issue occurs when I add two or more parties into the conversation. The call button will be greyed out and Im unable to make a call. 
    I've uninstalled and reinstalled the OCS but the problem still persists.
    Appreciate if anybody could help.
    Regards,
    Vinod

    Agree with Anthony.<o:p></o:p>
    You can check that by initialing a audio meeting.Then check if the call button grays out.<o:p></o:p>
    Lisa Zheng
    TechNet Community Support

Maybe you are looking for