Send comments gives the error message "Submission status must be modified"

Hi,
When I want to send comments I get the error message "This cell cannot be updatëd. Submission status must be modified to allow changes."
The work status is still unlocked for this period. It has something to do with authorizations.
We have users in teams with a data entry profile. These users have the "AddComment" task in their profile.
They are not able to send comments.
When I add these users to a team (being the owner of the parent entity) than they can send comments.
The problem is that in this way they can approve, luck and unlock periods which is not allowed.
How can I solve this problem?
Please help!
With kind regards,
Robert Nijsink

Hi there,
I changed the work state for comments as follows:
- Unlocked / <all>
- Submitted / <all>
I still get the same error message: "Submission status must be modified to allow changes"
The combination of a team being "Owner" of the parent with "data entry rights" is working properly.
What do I miss?
Regards,
Robert

Similar Messages

Upon upgrading iPhoto, iPhoto Help no longer works. It gives the error message: "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet." Help!?

Upon upgrading iPhoto, iPhoto Help no longer works. It gives the error message: "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet." I am obviously connected to the internet since you are reading this.
I tried upgrading permissions but it did not help!? Can anyone tell me what is wrong? Thanks

Try
Reboot the computer, see if that fixes it.
Then try:
Backup your files off the computer (not TimeMachine) and disconnect
Hold c boot off the 10.6 disk and simply reinstalling OS X
Log in and update to 10.6.8
c boot off the 10.6 disk again and use Disk Utility >Repair Disk
reboot and all should be fine, except some third party programs that install kext files, those will have to be reinstalled from fresh sources.

I am using only one Apple ID. The problem, since iOS 6, is the App Store purchased items screen just shows loading screen it finally crashes or gives the error message 'can not connect to Apple store'

I am using only one Apple ID. The problem, since iOS 6, is the App Store purchased items screen just shows loading screen it finally crashes or gives the error message 'can not connect to Apple store'

I am using only one Apple ID. The problem, since iOS 6, is the App Store purchased items screen just shows loading screen it finally crashes or gives the error message 'can not connect to Apple store'

I am editing a video in MP4 in Premiere 2014 cc When I import to Indesign 2014 cc gives the error message.

I am editing a video in MP4 in Premiere 2014 cc When I import to Indesign 2014 cc gives the error message.

I'm sorry for a MOST obvious couple of questions, but we need to get them out of the way...
Exactly HOW are you switching layers? If by clicking with the mouse, exactly where on the layer panel are you clicking with the mouse?
-Noel

Launching LR4 after a restart gives the error message "Lightroom encountered an error reading from its preview cache and needs to close" no fix on re

launching LR4 after a restart gives the error message "Lightroom encountered an error reading from its preview cache and needs to close" no fix on restart

Delete your preview cache, it is a folder whose name ends with Previews.LRDATA

My canon p-150m scanner gives the error message "cannot load drivers" ever since updating to yosemite

why does my canon p-150m scanner gives the error message "cannot load drivers" ever since updating to Yosemite ? I have had 2 reload the driver 2x - but each new time I start I keep getting the same error message .

Try resetting the printing system.
OS X Mavericks: Reset the printing system

Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.

Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.
I REINSTALL 10 TIMES SO DON'T TELL ME THAT!!!
I'm piss because i need firefox working again so i can finish reseaching my speech in 5 days.

Which files do you have in the defaults\pref folder in the Firefox program folder?
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
See also "Other solutions":
*http://kb.mozillazine.org/Preferences_not_saved
Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 22.0: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Why does the error message "Microsoft Outlook must be closed because an error occurred" keep coming up?

why does the error message "Microsoft Outlook must be closed because an error occurred" keep coming up?

Reboot the machine.

When I try to start Firefox, I get the error message "Your computer must be restarted to complete a previous upgrade of Firefox. Do you want to reboot now?" I have rebooted several times to no avail. Get the same message when I try to uninstall Firefox

When I try to start Firefox, I get the error message "Your computer must be restarted to complete a previous upgrade of Firefox. Do you want to reboot now?" I have rebooted several times to no avail. Get the same message when I try to uninstall Firefox

Just had this same problem. Based on other suggestions I found on the web, went to C:\Program Files\Mozilla Firefox and deleted all files that ended with upgrade and/or delete. Then I was able to uninstall Firefox and then reinstalled. Hope this helps!

HT201210 I cant use my iphone because I'm getting the error message that I must connect to Itunes and when I do it says the only option I have is to restore my phone.

I cant use my iphone because I'm getting the error message that I must connect to Itunes and when I do it says the only option I have is to restore my phone.

Try using RecBoot or TinyUmbrella to kick it out of Recovery mode.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

When creating iTunes account, my mom provided her credit card information and the system does not accept pre populated province and gives the error message ("please enter at most 3 letters or numbers for province") how does she get past this?

Why is my mom getting the error message for province when trying to create iTunes account when providing her credit card information?

Hi Nahal,
I'm just wondering, is it possible that your Mom (originally) got her credit card in a different province?
I don't know much, but of this I am certain: Apple would absolutely, positively, love to help you create an iTunes account!
Otherwise, you can start here > http://support.apple.com/kb/HE57
Best Regards,
mm~

My HP Photosmart 7510 gives the error message: "No computer is connected." when I try to scan.

The Photosmart 7510 prints without any problem. However, when I try to scan, the error message: "No computer is connected." is displayed. My operating system is Windows 7 Professional, on an Hp desktop computer

Hi there jonathan46900;
Hope you are doing well;
try this article
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02963481&cc=us&dlc=en&lc=en&product=5070121&tmp...
This should help you fix this issue, please let me the outcome I will do my best to help you,
RobertoR
▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

I just updated my IPad to iOS 5 and now can not send email. The error message says the server rejects the address which is not true Asti sends on my desktop.

I just updated my iPad to iOS 5 and now can't send email- I have tried the obvious but no luck. Any suggestions?

Usually 'authentication required' means that you need to submit a username (or e-mail address) and password to the e-mail server, when sending a message. This logic is not different between Outlook and Thunderbird, and even with the latest and previous version of Thunderbird.
Of course you can try the previous version again to see if it solves the problem, although you'll be less secure because you would be missing the latest fixes.
If you'd be willing to get back to Thunderbird, say if your frustration level with your new app would increase too much, please see our article [https://support.mozilla.org/en-US/kb/cannot-send-messages cannot send messages] for further help.
In all other cases I'd appreciate it if you could mark this as answer so we know you don't need further help.

When connecting to a database, dreamweaver gives the error message [MySQL Error

When I try to connect my MySQL database into dreamweaver, I insert all of the information (name, server, username, password), and when i click on select database, it reads:
MySQL Error#:1045
Access denied for user 'mresnik_mresnik'@'192.185.5.169' (using password: YES)
I am 100% sure that The details entered including username and password are correct, as I have contacted hostgator.com and they have stated that they can connect, and they advised that it may be an issue with either my files or dreamweaver.
Any help would be very much appreciated.

Login.php code:
<?php require_once('Connections/drama_database.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
    $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
?>
<?php
// *** Validate request to login to this site.
if (!isset($_SESSION)) {
session_start();
$loginFormAction = $_SERVER['PHP_SELF'];
if (isset($_GET['accesscheck'])) {
$_SESSION['PrevUrl'] = $_GET['accesscheck'];
if (isset($_POST['UserName'])) {
$loginUsername=$_POST['UserName'];
$password=$_POST['Password'];
$MM_fldUserAuthorization = "userlevel";
$MM_redirectLoginSuccess = "home.php";
$MM_redirectLoginFailed = "loginfail.php";
$MM_redirecttoReferrer = false;
mysql_select_db($database_drama_database, $drama_database);
$LoginRS__query=sprintf("SELECT username, password, userlevel FROM users WHERE username=%s AND password=%s",
GetSQLValueString($loginUsername, "text"), GetSQLValueString($password, "text"));
$LoginRS = mysql_query($LoginRS__query, $drama_database) or die(mysql_error());
$loginFoundUser = mysql_num_rows($LoginRS);
if ($loginFoundUser) {
    $loginStrGroup = mysql_result($LoginRS,0,'userlevel');
    if (PHP_VERSION >= 5.1) {session_regenerate_id(true);} else {session_regenerate_id();}
    //declare two session variables and assign them
    $_SESSION['MM_Username'] = $loginUsername;
    $_SESSION['MM_UserGroup'] = $loginStrGroup;
    if (isset($_SESSION['PrevUrl']) && false) {
      $MM_redirectLoginSuccess = $_SESSION['PrevUrl'];
    header("Location: " . $MM_redirectLoginSuccess );
else {
    header("Location: ". $MM_redirectLoginFailed );
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
    $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
?>
<html>
<title>Drama Database - Login</title>
<head>
    <link href="images/favicon.ico" rel="icon" />
</head>
</html>
<script src="SpryAssets/SpryValidationTextField.js" type="text/javascript"></script>
<link href="SpryAssets/SpryValidationTextField.css" rel="stylesheet" type="text/css" />
<form ACTION="<?php echo $loginFormAction; ?>" id="loginform" name="loginform" method="POST">

<br>
<br>
<br>
<div align="center">

<img src="images/logo_acs_egham.gif" width="387" height="59" /><br>

<br>
<img src="images/bglogin.jpg" alt="Acs-Egham International School" width="246" height="153">
<br>

<h2>Drama Database Login</h2>
</center>
</div>
<table width="154" border="0" align="center">
    <tr>
      <td width="148">Username:<br />
        <span id="sprytextfield1">
        <label for="UserName"></label>
        <input type="text" name="UserName" id="UserName" />
      <span class="textfieldRequiredMsg">A value is required.</span></span></td>
    </tr>
    <tr>
      <td> </td>
    </tr>
    <tr>
      <td>Password:<span id="sprytextfield2"><br />
        <label for="Password"></label>
        <input type="password" name="Password" id="Password" />
      <span class="textfieldRequiredMsg">A value is required.</span></span></td>
    </tr>
    <tr>
      <td> </td>
    </tr>
    <tr>
      <td align="center"><input type="submit" name="LoginButton" id="LoginButton" value="Login" /></td>
    </tr>
    <tr>
      <td> </td>
    </tr>
</table>
</form>
<script type="text/javascript">
var sprytextfield1 = new Spry.Widget.ValidationTextField("sprytextfield1");
var sprytextfield2 = new Spry.Widget.ValidationTextField("sprytextfield2");
</script>

Sending An Error Message as Status Message

Hi,
I have a selection screen which was (Object Oriented program ) defined through Function Group and calling via Function Module. when the transaction Starts with selection Screen and we have few buttons on the selection screen, when we enter data and we need to press F9 we are validating the data and we need to give an error message, i am doing same, but the error message was coming as pop-up, once i click on the pop-up it is getting out of the selection screen. but actual requirement was it has to stay
back on the selection screen.
Is there any way to give the error message as status message instead of
pop-up.
Thanks In Advance.
Regards
Nags

Hi,
We have an option to set this, the last button of the menu(button will be in multiple colors) , press that and select the settings, a pop up will open, there in one of the tab, you can select the option to display the mesage in the status bar
Regards
Sudheer

Send comments gives the error message "Submission status must be modified"

Similar Messages

Maybe you are looking for