Send connector for forwarded emails not being used by Exchange 2013

Hi we have 3 Exchange 2013 CU5 servers in a DAG setup and need to forward emails for some of the users to another domain. The problem is our outgoing spam filter seems to quarantine a lot of these emails which are  not spam. The problem is that I
created a send connector for  the domain we are forwarding to (say contonso.com for illustrative purposes). Gave the send connector the name contonso.com, selected use MX record (didn't select Use the external DNS lookup settings on servers with transport
roles) and added contonso.com in the address space gave it cost of 1. Added all the exchnage servers under source server. And clicked save. I then changed the cost to 2 on the main send connector with the domain as * which goes trhough our oput bound spam
filter yet email I  send to one of the recipients with a forward inplace still go through that connector. Can anyone tell what i'm doing wrong or explain why this wouldn't work as expected ?   

Easy question, did you enable the connector? :)
Do you have more than one site in your org?
DJ Grijalva | MCITP: EMA 2007/2010 SPA 2010 | www.persistentcerebro.com

Similar Messages

  • Relay Host for Outbound Messages not being used...

    I have a new v7 GWIA on a new domain that is using the relay settings from the original GWIA (on a separate domain) despite its own settings.
    Anyone seen this before?
    Regards

    Check your GWIA.CFG file as anything in there will override settings from eDirectory. I think the switch is /mh which is your Mail relay Host.
    If that isn't it, when you say it's a new GWIA, is this a new GWIA installation? Is it a whole new object? Or is it a new server that is running against the existing GWIA object?
    Aaron

  • How can I unverify an email once it is not being used?

    I changed my iTunes account email once. Now, I need to get back to that email, but Apple says it is being used in another account. I am pretty sure that the first email is not being used for any other account.
    Through Apple's site, I chose "iForgot" to resend the password , so I should be able to login to that email account (if it was linked to another account, like they claim). Apple can't send an email for verification. Actually, they say that the email was sent, but it was not.
    How can I unverify this email once Apple says it is linked to another account, but it is not (if it was, the iForgot email would come)?

    for either method to work the state dividing lines must go past the state borders, for example, the line that divides these two states needs to go north a little bit more, I exaggerated the space so you can see, for your map this gap must be really small. Zoom in where you have trouble making separate shapes and fix it before using either tool.

  • My ipad 2 will cut off completely if not being used for a while. you have to hold power button to power up everytime. anyone else having this problem? thanks

    My Ipad 2 will shut completely down if not being used for a while. You have to hold power button down for several minutes before it will power back on. anyone else have this problem and know how to fix?  My other sons ipad 2 doesnt do this and they have both had updates and are same generation.
    Thanks 

    I had major issues with the iPhone 4s battery, however it’s resolved.
    The tech who set the phone up at the Apple store did so with little training.
    if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
    Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
    turning of locator and the push notifications from facebook--they have a lot!

  • Bought a Mac Mini.  at 18 day's old it started to lock up and not function.  Took it in and they wiped and reinstalled it.  Well at 24 day's old it's been sitting in the box not being used.  First and last Mac for me. But can I get something for the junk?

    I have pulled it out of the box and put 2 Mac approved mem sticks in it to boost it to 8 Gigs mem and it still locks up and freazes..  So many people told me Mac was the way to go...  1500 dollers could have bought me a great pc laptop.  Now I have a wirless mouse keyboard and a mac mini (aka Brick) that allowed me to donate money to a cause that is helping buildings and companies out side of the US.  While I have junk..  It's still under warranty and I reinstalled the os after the new mem sticks.  Again.. locks up and does nothing.  What can I do with this?  Toss it in the trash?  Any info on what I might do with it.. Please help!

    It would be most helpful if you updated your system information:
    Please reconcile the following
    at 18 day's old it started to lock up and not function. Took it in and they wiped and reinstalled it. Well at 24 day's old it's been sitting in the box not being used.
    ... I reinstalled the os after the new mem sticks.
    If your Mini is anything less than six months old it would be running Lion, not 10.6.1, nor would it have been necessary to "reinstall the OS". Any help that anyone can provide is predicated on your system configuration so it's important.
    If you are running Lion then boot your Mini while holding the D key. This will load Apple Hardware Test which will enable you to test your memory. "Mac approved" memory is sort of vague, and even memory that is allegedly designed to meet your Mini's specification may fail. There few reputable memory vendors.
    "Apple installed" memory is more meaningful, and indicates Apple has tested it and guarantees its function. Otherwise all bets are off with a claim of "Mac approved". You will have to verify that yourself with Apple Hardware Test.
    If your Mini was running, or ever ran OS 10.6.1 for that matter, it is close to three years old.
    You must clear up these uncertainties before anyone can help.

  • Fairly new battery not charging after not being used for a while

    My computer (Elitebook 2530p) has not been used for a while, perhaps a month or two. The battery used to hold for over 3 hours of light use.
    Now, the battery won't charge with the message "0% available (plugged in, not charging)"
    I can't find a battery refresh utility in the BIOS, or any way to interact with the battery. Is there something I'm missing? Should the battery just go dead after not being used for a while?
    Update: fixed typo

    I've run the HP battery check and got the code REOOW. Battery is dead, and I am out of warranty. I can't think of any possible reason why this should have happened.
    What does this code (REOOW) mean?

  • Period is closed for posting or correct document type is not being used

    Hi All,
    I am trying to post transaction in AB01. But i am getting below error.
    I have checked OB52 and the periods for "+" & "A" are open for 2012.
    Error:
    Period is closed for posting or correct document type is not being used.
    Please assist

    document type i am using is AA.check it other side entery documenttype period open or not

  • 'requestblock' emails not being sent

    I had a similar post on the ticket confirmation auto response email. It is not a question of emails not being generated at all - the order confirmation mail is being generated fine so I know the messaging is working to some degree, but I have created a form using requestblock.ascx and although the records are generated in the Contact log in the WT db there are no outgoing emails created.
    As before the only evidence of failure of any kind is:
    1) Event Viewer Application Log : SAPB1WTMS Thread was being aborted at NetPoint.MessgingService.NPMessagingThread.Work()
    2) Webtools log Message type I module sender SendingQueue is disabled
    I am using SP01 PL01 for this
    Can anyone offer any suggestions as I am sure someone is successfully using the requestblock.ascx to generate emails

    I have noticed that in Config>messaging I did not have SendQueue ticked.
    Having ticked it I got the missing mail messages created

  • Materialized view not being used in the report

    I have had a materialized view (MV) for a particular report. Recently, the report definition has changed little bit, so the existing MV is not being used by the report anymore. I copied the code Discoverer's SQL Inspection and recreated the materialized view. But still it is not working. Obviously, I am missing something at the database level. Does anyone have any idea? The database is 9i and Discoverer is 9.0.2. Thank you!

    The SQL that you see from the Inspect SQL option will provide you with the SQL that Discoverer sends to the database. The database then may do a query rewrite to point to an available materialized view if available. This rewrite won't be seen from the inspect sql option. You need to check at the database level to verify if a query rewrite did in fact take place.
    You may want to check the section titled "Query Rewrite with Materialized Views" from Ch1 - "Introduction to the Optimizer" in the Oracle9i Database Performance Tuning Guide and Reference, Release 2 (9.2), Part Number A96533-02, available at http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96533/optimops.htm#37287
    Regards
    Abhinav Agarwal
    Oracle Business Intelligence Product Management
    http://www.oracle.com/bi
    http://www.oracle.com/technology/documentation/bi_ee.html
    http://www.oracle.com/technology/software/products/ias/htdocs/101320bi.html
    http://oraclebi.blogspot.com/

  • HBOgo "StageVideo is not being used"

    I just updated flash today, November 25 2013, which gives me version 11,9,900,152.  The problem I'm having seems specific to the HBOgo.com site.
    The problem occurs in all three browsers that I've tried, Firefox (my preferred browser), Chrome, and IE 9.  Also, I've tried the various suggested troubleshooting suggested on the Adobe site as far as enabling Flash addon in IE after disabling (unchecking) the choice for ActiveX filtering.  I've tried uninstalling/reinstalling all 3 browsers, reinstalling flash, resetting all video card settings to default, going through the Device Manager and uninstalling the device entirely, making sure it has no errors or conflicts anywhere and the same thing for the network devices, they all indicate that they are working properly.
    My device is an HP Pavilion dv7 Notebook PC running Vista Home Premium Service Pack 2.  It has 4 GB of memory and the video card is an NVIDIA GeForce 9600M GT.  The drivers are all up to date and so is every application and its associated add-ons that I will mention.  Also, it shipped with a Blu-Ray player which I've used to display Blu-Ray content on an external monitor with no issue.  (If it can do that, then shouldn't it just be some software issue preventing it from playing back a video stream of inferior quality from hbogo?)
    Regarding Flash Player, I've watched videos on YouTube and Hulu (and countless other sites which stream Flash Video) at resolutions of 720 and 1080 which played at framerates between 25 and 30 fps and which also did not use hardware acceleration but nevertheless maintained CPU usage of less than 70%.  So, the computer can certainly do it even without the help of the GPU, and it can do it from other sites that use flash, but not from HBOgo.  That's a second problem, even when flash video plays well, it's still not using hardware acceleration, but first I want to know why HBOgo's flash player is so much worse than everyone else's player.
    Here is the specific issue:  I navigate to HBOgo.com, pick any video to play and begin playback.  Playback usually begins at a relatively low resolution (I'd guess 480 or so based on its obvious pixelation), and then steps up the resolution gradually.  Usually after a minute or so, it will have reached its best resolution and that's when it starts dropping frames like crazy and pinning the CPU at 100%.  The video looks terribly choppy and the audio skips the more choppy the video is.  When I click pause or hit the spacebar for a pause, it will take two or three seconds as it spits out the last few video frames before finally showing the paused icon on the last frame.  Those two seconds seem to corrolate with CPU processing since there is no noticable delay when pausing video anywhere else under any other conditions.  Of course, CPU useage will drop back to 5 or 10 while the video is paused.
    Right-clicking the screen lets me choose "Show Video Debug" which in turn tells me:
         StageVideo enabled in OSMF: Yes
         StageVideo is supported.
         StageVideo is not being used, regular video 'probably' is.
    This is where I got the information about dropped frames.  If it matters, when paused, the buffer will fill to about 400 Mb plus or minus about 10 percent of that, perhaps.  Also, during playback, the buffer maintains approximately the same amount, indicating that my ISP has no problem sending that much data to my device.  The buffer seems fill to a lenght of time, about 60 seconds; so, as the video resolution goes down, the total buffer drops accordingly... sometimes it is at 200 Mb for 60 seconds with lower resolution, etc...
    Speaking of my ISP, I have Verizon FiOS (I don't know why it would matter, but I'm in King of Prussia, which is near Philadelphia, PA).  I just tested my bandwidth and it tells me that my IP is 71.175.97.244 and my download rate is 57.98 Mbps from some server in Matawan, NJ.  I don't think networking issues factor into this at all.  I say that because, digging into the developer tools (all 3 browsers show the same network activity: Firefox, Chrome, and IE) and clicking on the "Network" column, it consistently shows low latency for all the stream components.  For example:
         path: http://hds.pro12.lv3.hbogo.com/videos/PRO12/e2/hbo/feature/728425/hbo_821867_PRO12_f4m/hbo _821867_PRO12_8-Seg1-Frag858
         method: get
         type: video/f4f
    Timing Tab show:
         Sending: 0     Waiting: 89mg     Recieving: 159ms
    This seems to indicate that I'm getting the data sent to me without any problem, so forget about network issues, right?
    Also, regarding information available in Developer Tools, I can see that the flash video object has the paramater "wmode" set to "transparent".  I already wasted time messing with this before I realized that the paramater is irrelavent while in fullscreen mode -- besides the fact that even when it is changed to direct or gpu when not in full screen, it does nothing to help matters.  I think this was covered in one of the last discussions talking about lack of hardware acceleration on HBOgo -- the same discussion that ended with a few people saying that they were going to "throw in to towel".
    What am I missing here?  Why is StageVideo supported but not used?  Why do other players which use flash play videos with better quality despite still not using hardware acceleration?
    Windows Vista = updated
    NVIDIA Video Drivers = updated
    Flash Player = updated
    Flash Addons (pepper flash, etc...) = updated
    Firefox, Chrome, IE = all updated
    There's got to be something I can do.  What is it?

    Hello Sarvanan,
    What do you mean by "the respective field not having the Unit/Curr Objects"..?..some of them are of the type "number" whereas others are CHARS.
    Everytime when i add some field i cannot re-create the whole transformation. There has to be some inconsistency as my mapping of source-target field is correct. I have also raised this to OSS but as usual they are taking thier own sweet time to reply.
    Surprisingly the transformation got activated yesterday and the dataload too was successful. Today again the same ols problem of "parameter is not being used"..!!
    still could you pls throw some light on Unit/Currency objects that u mentioned..??
    Thanks in adv.
    Sucheta

  • Parameter value from app is not being used

    Hi,
    I have .NET application which renders the report from BOE using infoObject model. This report has parameter and the paramter info is passed from the application using following code.
    CrystalReportViewer1.EnterpriseLogon = enterpriseSession;
    CrystalReportViewer1.ReportSource = (Report)infoObject;
    CrystalReportViewer1.ParameterFieldInfo = parameterFields;
    But when I try to run this form...though the parameterfields have the detail of the paramter still Promt screen is scheduled by BOE to provide input for the parameter...
    Can someone help me on this why the parameter value I am sending is not being used.
    Thanks
    Kajal

    It might have something to do with how you are creating your parameter field collection that you are passing to the viewer.  Please refer to the ViewReportParameter sample in the following collection available [here|https://boc.sdn.sap.com/node/5794]

  • Emails not being downloaded from BTYahoo to Outloo...

    Since Thursday have had a problem with emails not being forwarded to my Outlook in box, this is about the third time this has happened.   I did notice that some else has posted with the same problem.  Any ideas on how to unblock the system!   The only other solution is to get through to BT Help in India!   Must admit they were very helpful last time this happened.   Any solutions greatly appreciated, bearing in mind that I willl have to go to my BTYahoo page to see any solutions.   Many thanks.    caravanlady

    caravanlady wrote:
    Since Thursday have had a problem with emails not being forwarded to my Outlook in box, this is about the third time this has happened.   I did notice that some else has posted with the same problem.  Any ideas on how to unblock the system!   The only other solution is to get through to BT Help in India!   Must admit they were very helpful last time this happened.   Any solutions greatly appreciated, bearing in mind that I willl have to go to my BTYahoo page to see any solutions.   Many thanks.    caravanlady
    Hi.
    It seems that more and more people are experiencing issues using Outlook, however the problem is more likely down to a couple of reasons.
    If could be an Outlook account corruption - so creating a new account in Outlook with the same email details may work. Also logigng into webmail (BTYahoo!) and moving the latest Inbox emails into a temporary folder. Then move a few at a time and retry Outlook, in case there is a corrupt email which can be dealt with separately.
    Do you keep all the emails on the server ? If so, there is a chance that this could cause issues with any mail client program such as Outlook - as they have to index the emails so that they don't download ones already seen.
    http://www.andyweb.co.uk/shortcuts
    http://www.andyweb.co.uk/pictures

  • TS1702 My "send" button for iMessage is not working. Anyone else having this oproblem?

    My "send" button for iMessage is not working. Anyone else having this problem?

    Mine isn't working either for my iPhone. I tried activating it again and it won't wont let me select my number for iMessage:/ it only lets me add an email address which is pointless seeing as I use I message to txt from my number.

  • How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activ

    How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activated. HELP?  I really need to continue using this product for my home business.It works fine not activated but the threat is that it will stop working in 13 more days if I don't get it activated, and none of the activation methods they list seem to work.

    The new serial number is to the right of your chosen download.

  • Where to look for all value mappings being used in ID

    Hi All,
              Where to look for all value mappings being used in ID?
    XIer

    Hi,
    Let me re-frame it, Do u want to know where all the value mappings(created in ID) is used in Mapping Program of IR, isn't it?
    If yes, then it's not possible( as far as  I know).
    raj.

Maybe you are looking for