Send Connector TAB - Force Closed

Hi
I'm not sure why or how this has just started. When i open Exchange Management Console all is fine, but when i go to Organisation Configuration
à Hub Transport and click on the Send Connector Tab an error box appears with a RED CROSS "Force Closed" and does not show my send
connector, i have restarted the server, made sure all services are started except for POP and IMAP, done windows update, restarted again.
but still the same issue, not sure what the problem is or where to go from here so any help would be much appreciated.
Thanks
T

Hi, sorry its not fixed but the above was a work around.
After running
Get-SendConnector | fl fqdn
in the shell cmd, when i opened exchange management console à send connectors tab it displays the connectors
fine.
but if i close the exchange management console then close the shell cmd then re-open the exchange management console
à send connectors the error box is back and no connectors are displayed.
Then if i re-run the
Get-SendConnector | fl fqdn in the shell and then re-open the exchange management console
à send connector tab it displays the connectors fine again.
is there a way to find out what’s causing this issue
Thanks
T

Similar Messages

Add second sourcetransportserver to send connector

I created a send connector to force TLS to a particular email domain. However, for some reason, I need to manually add the second sourcetransportserver. Anyone know the correct PS syntax to add the second sourcetransportserver?
Correct setup showing both -
My send connector with only one -

Hi,
In addition to the above cmdlet, you can set the SourceTransportServers to your send connector via EAC.
EAC -> mail flow -> send connectors -> double click the Send Connector -> scoping -> click "+" underneath Source server
For your reference:
Hope this can be helpful to you.
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Amy Wang
TechNet Community Support

Force Closing when trying to edit contacts

Lately after receiving my new replacement droid with the Froyo already installed; every time i try to edit a contact i get force closed error messages? Is anyone else receiving this message?

You would want to first make sure that you have the most updated software on the phone.
From the main screen, touch menu tab
Touch Settings
Touch About Phone
Touch System Updates
Then try doing a soft reset on the device by removing and replacing the battery.
Press the Power key.
Touch Power off.
Touch OK.
Press the Power key to power on the device.
Then dial *228 send and option 1 on the device.
If the problem persist, log in to your Gmail account and remove the contact, then re- enter it manually in the phone.

EOP inbound connector required forced TLS for on-premise Exchange?

We purchased EOP spam protection for an on-premise Exchange 2010 environment. Inbound email is currently flowing through EOP to their exchange just fine, but we don't have them routing outbound email back through EOP due to the TLS certificate setting.
We would like to point their Exchange send connector smarthost to EOP for best practice. EOP documentation states we must use Forced TLS and a certificate name for the inbound connector. The documentation falls short here and I need
some help getting TLS setup on the on premise exchange. Is it required to use Forced TLS or can we change to opportunistic TLS like the EOP outbound connector? We currently only have a SSL certificate for their OWA set to mail.domain.com.
Is that what I use as the TLS certificate name? Can someone point me in the right direction here? Thanks.

Hi,
you don't need TLS to send mails over EOP if you use it as smarthost.
Greetings
Christian
Christian Groebner MVP Forefront

Send connector in different costs

Hi,
All my exchange 2010 servers are in 1 single AD site.
It seems not working when I configured item no 2.
1. address => *, source server => hub A, cost => 1
2. address => *, source server => hub B, cost => 100
It is working if I joined Hub A & Hub B under send connector source server. This configuration will send via HUB A or HUB B.
My objective is to send to cost 1 as 1st proity. Any additon configurations are needed?
P/S: I was using this following for DR MBX and DR HUB
Set-MailboxServer -Id: mbxserverA-SubmissionServerOverrideList: htserverB,htserverC
Question: is it for all send and recived connectors?
Please advise. Thanks.
Kelvin Teang

Hi,
Exchange must bind the send connector to a specific hub transport server in your Exchange organization. By default, Exchange chooses the server that you are creating the connector on, but you do have the option of specifying a different hub transport server.
To meet your requirement, you should join both Hub A and Hub B under source server.
About SubmissionServerOverrideList, Exchange Hub transport Server will be automatically load balanced within the Active Directory Site. Hub Transport Servers are load balanced in Round robin fashion within the Site. If you want to force Exchange Mailbox
server to use specific Hub Server you need to make use of SUBMISSIONSERVEROVERRIDELIST.
"Set-MailboxServer -Id: mbxserverA-SubmissionServerOverrideList: htserverB,htserverC"
The command above will set Mailbox Server mbxserverA to use htserverB and htserverC for mailsubmission.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Close the last tab without closing the firefox app

greetings!
1.I would like to close the last tab without closing the app. The behaviour I expect is the app to open a new blank tab when I close the last tab. Currently I cannot close the last tab which already has some website opened in it.
2. When I open a new tab, i'm forced to enter a website address. I expect to the app to simply open a blank new tab & leave it to me whether to enter a address or not.
Thanks for your support. I love firefox for Android.

well, I would prefer to leave it to the end user whether he wants the awesome screen while pressing a new tab button/ or open a simple blank page. Let him choose it in the config.
regards,

Send connector with smart host redirection for particular domain

Hello,
We have quite big environment with Ex2007 CCR cluster with 2x CAS/HUB and 2x Edge servers with few accepted authoritative domains for several countries. Currently all mails from these are routed through one send connector.
We're moving to a different mail filtering service and I wanted to setup one of our domains to send through the new service to get it all setup and working correctly before moving the other domains over to it.
So i have configured dedicated new custom send connector ( in accordance with techent article: http://technet.microsoft.com/en-us/library/aa998814%28v=exchg.80%29.aspx) for one of our domains let's say contoso.com with priority 1, and in next step i have
entered smart host ip's and at the end source servers (2x edge servers).
I have spotted that mail would still not send through my new send connector for those with email addresses with that domain. I turned on verbose logging but still all emails are not going through new connector. I checked that changes were replicated succesfully
on Edge servers and I restarted on Cas/Hub machines "EdgeSync" service but still no luck.
Please help me did I forgot to check/change something?

Let me be sure I understand how you have your new send connector configured, so I don't give you the wrong information. You said you configured the new send connector with the contoso.com email domain. From how you said it, though ("one of
our domains"), it appears that email domain is one of your internal email domains. If this is the case, this is why this send connector isn't being used - the send connector will send only to those email domains listed in the address
space tab. If I am right, it will never send to any external recipients with an contoso.com email address - those mailboxes are internal. If you have an external SMTP domain in that list (such as hotmail.com), you should see messages sent to recipients
on that system through this connector.
If I am not right in how I read your posting, let me know so we can figure out how to get your send connector working properly.

Send connector from exchange 2007

Currently since I have both environments up, I see that Exchange 2013 is using the send connector that was created in my exchange 2007 environment. Will this send connector go away once I bring down my exchange 2007 environment? Shoould I create
a new one for Exchange 2013?

Hi
From what i have seen running ex2010 and upgrading to 2013 it stayed (exchange 2013 is clever :-)). you can just modify your send connector and make sure that the settings are for your exchange 2013 server.

Forced closing open Approved POs with data related issues

Hello All,
I have a requirement to force "Final Close" all the old Pos (2 - 3 year old) as part of data clean up. Most of the POs can't be closed through froms as they are all 3-way match POs and their recieved/delivered qty <> invoice qty.
I 'm wondering does Oracle provide any data clean up scripts for the forced closed POs ? If not if we update the back end tables (oracle does not advise) are there any implications for the new transactions ?
Thanks for your help & feedback
Ravi

I'm having this exact same problem, except I don't use GMail Notifier. The being unable to log out, shut down, or restart issue I've had intermittently in the past; the broken screensaver is new.

Collapsible Panel - Tab start closed?

Hello
Just began working with Spry and I'm going to use the
Collapsible Panels to display multiple lists, each form a different
year, beneath eachother. Therefore I wanted the top list to start
as open, just as it normally does - but the rest that followed
would start as closed. I'll code the PHP to assign the tabs their
classes based on their position myself, but I just need help with
how to give a tab the closed-value.
Do I need to temper with the .js-file, or is it enough to
change the class of the tab-div to CollapsiblePanelClosed for
instance. I tried the latter, but it didnt work. In addition I
couldn't find the class CollapsiblePanelClosed represented in the
.css-file either.
Short example:
2007 (begins open and displays its content)
- item 01
- item 02
- item 03
2006 (begins closed)
2005 (begins closed)
etc.
Thanks,
Eirik

Hi Eirik,
you should better use Collapsebile Panel group. We can find
an working example
here.
Diana

Bug Report : Upgraded to Firefox v10. Holding CTRL+ [F4] too long after all tabs are closed causes error. "Exc in ev handl: TypeError: this.oPlg.onTabClosed is not a function"

Bug Report :
Upgraded to Firefox v10. Holding CTRL+ [F4] too long after all tabs are closed causes error.
"Exc in ev handl: TypeError: this.oPlg.onTabClosed is not a function"

What extensions do you have? (Go to Firefox > Customize > Add-ons to see or Help > Troubleshooting info for a copy-pasteable list)

Firefox is not saving open tabs when closing, it says other session of Firefox is running but this is not the case.

Firefox used to save open tabs when closing the browser. This no longer happens and Firefox says other session running. Task Manager shows that this is not the case.
Recently installed an flv/mpeg viewer "aLot" which placed a toolbar in Firefox.
Am running Firefox 3.0.5 on Windows XP with Service Pack 3.

Your useragent says your are running Firefox 3.6.13 -> is that true.
If not, do the following and post back your new Firefox version:
* Type about:config in the URL bar and hit Enter
* If you see the warning, you can confirm that you want to access that page.
* Filter = general.useragent.
* Right-click the preferences that are bold, one line at a time, and select Reset.
* Then restart Firefox

How to send email to a SMTP server over a secure channel using STARTTLS setting of a send connector (Exchange and SMTP server are in the same domain)

I’m trying to send email using exchange send connector STARTTLS setting to the SMTP server. I have read multiple documents on configuring TLS for send connector, but they talks about outbound connections to internet facing servers. My Exchange 2013 and SMTP
server is in the same domain (let’s say A.com) and I’m creating dummy domains on my SMTP server (e.g.
[email protected],
[email protected] ) and their respective send connectors on the exchange server end. In the smart host section added the IP address of the SMTP server and in the scoping section added the SMTP domain address (e.g. dummy1.local ). In the FQDN field, added
the FQDN of the exchange server 2013 which certificate is enabled with SMTP service.
Could you tell me a step by step procedure, where I’m going wrong or any extra settings needs to added?
Presently, it is giving me an error that 530 5.5.1 TLS encrypted connection is required.
Note: I’ve created the Microsoft CA certificates for the SMTP and exchange servers and imported them in the personal certificate container. In which, the exchange certificate is created with FQDN name of the server and enabled for the SMTP service.
I’m using OPENSSL certificate for making the SMTP server TLS enabled. (let me know, if I need to import the OPENSSL certificate anywhere on the exchange end)?
Thanks!

-IgnoreSTARTTLS is set to false on the send connector properties.
I'm trying to established a HTTP over TLS connection. I'm not using mutual TLS between these two server.
The send connector protocol logging is attached as below,
2014-09-22T20:09:45.468Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,2,10.219.3.74:24939,10.219.3.73:25,<,220 SMTP.A.local Welcome (MTA version),
2014-09-22T20:09:45.546Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,3,10.219.3.74:24939,10.219.3.73:25,>,EHLO Exchange.A.local,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,4,10.219.3.74:24939,10.219.3.73:25,<,250-SMTP.A.local Exchange.A.local OK,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,5,10.219.3.74:24939,10.219.3.73:25,<,250-SIZE,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,6,10.219.3.74:24939,10.219.3.73:25,<,250-8BITMIME,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,7,10.219.3.74:24939,10.219.3.73:25,<,250-BINARYMIME,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,8,10.219.3.74:24939,10.219.3.73:25,<,250-PIPELINING,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,9,10.219.3.74:24939,10.219.3.73:25,<,250-HELP,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,10,10.219.3.74:24939,10.219.3.73:25,<,250-DSN,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,11,10.219.3.74:24939,10.219.3.73:25,<,250-CHUNKING,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,12,10.219.3.74:24939,10.219.3.73:25,<,250-AUTH SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,13,10.219.3.74:24939,10.219.3.73:25,<,250-AUTH=SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,14,10.219.3.74:24939,10.219.3.73:25,<,250-STARTTLS,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,15,10.219.3.74:24939,10.219.3.73:25,<,250-DELIVERBY,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,16,10.219.3.74:24939,10.219.3.73:25,<,250-MT-PRIORITY,
2014-09-22T20:09:45.640Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,17,10.219.3.74:24939,10.219.3.73:25,<,250 ENHANCEDSTATUSCODES,
2014-09-22T20:09:45.655Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,18,10.219.3.74:24939,10.219.3.73:25,>,STARTTLS,
2014-09-22T20:09:45.671Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,19,10.219.3.74:24939,10.219.3.73:25,<,220 2.7.0 Ready to start TLS,
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,20,10.219.3.74:24939,10.219.3.73:25,*,,Sending certificate
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,21,10.219.3.74:24939,10.219.3.73:25,*,CN=Exchange.A.local,Certificate subject
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,22,10.219.3.74:24939,10.219.3.73:25,*,"CN=DC-CA, DC=A, DC=local",Certificate issuer name
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,23,10.219.3.74:24939,10.219.3.73:25,*,63E7E70100000000000B,Certificate serial number
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,24,10.219.3.74:24939,10.219.3.73:25,*,CAEB1200CDF49715E5F2E4B8315EFDDC01F8F945,Certificate thumbprint
2014-09-22T20:09:45.780Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,25,10.219.3.74:24939,10.219.3.73:25,*,Exchange.A.local,Certificate alternate names
2014-09-22T20:09:46.654Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,26,10.219.3.74:24939,10.219.3.73:25,-,,Local
2014-09-22T20:09:46.669Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,0,,10.219.3.73:25,*,,attempting to connect
2014-09-22T20:09:46.685Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,1,10.219.3.74:24940,10.219.3.73:25,+,,
2014-09-22T20:09:46.701Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,2,10.219.3.74:24940,10.219.3.73:25,<,220 SMTP.A.local Welcome (MTA version),
2014-09-22T20:09:46.701Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,3,10.219.3.74:24940,10.219.3.73:25,>,EHLO Exchange.A.local,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,4,10.219.3.74:24940,10.219.3.73:25,<,250-SMTP.A.local Exchange.A.local OK,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,5,10.219.3.74:24940,10.219.3.73:25,<,250-SIZE,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,6,10.219.3.74:24940,10.219.3.73:25,<,250-8BITMIME,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,7,10.219.3.74:24940,10.219.3.73:25,<,250-BINARYMIME,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,8,10.219.3.74:24940,10.219.3.73:25,<,250-PIPELINING,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,9,10.219.3.74:24940,10.219.3.73:25,<,250-HELP,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,10,10.219.3.74:24940,10.219.3.73:25,<,250-DSN,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,11,10.219.3.74:24940,10.219.3.73:25,<,250-CHUNKING,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,12,10.219.3.74:24940,10.219.3.73:25,<,250-AUTH SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,13,10.219.3.74:24940,10.219.3.73:25,<,250-AUTH=SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,14,10.219.3.74:24940,10.219.3.73:25,<,250-STARTTLS,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,15,10.219.3.74:24940,10.219.3.73:25,<,250-DELIVERBY,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,16,10.219.3.74:24940,10.219.3.73:25,<,250-MT-PRIORITY,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,17,10.219.3.74:24940,10.219.3.73:25,<,250 ENHANCEDSTATUSCODES,
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,18,10.219.3.74:24940,10.219.3.73:25,*,,sending message with RecordId 52652004081667 and InternetMessageId <[email protected]>
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,19,10.219.3.74:24940,10.219.3.73:25,>,MAIL FROM:<> SIZE=7653 BODY=BINARYMIME,
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,20,10.219.3.74:24940,10.219.3.73:25,>,RCPT TO:<[email protected]>,
2014-09-22T20:09:46.825Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,21,10.219.3.74:24940,10.219.3.73:25,<,530 5.5.1 A TLS-encrypted connection is required,
2014-09-22T20:09:46.950Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,22,10.219.3.74:24940,10.219.3.73:25,<,503 5.5.1 unexpected RCPT command,
2014-09-22T20:09:46.981Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,23,10.219.3.74:24940,10.219.3.73:25,>,RSET,

How do I move a group of tabs before closing a window?

I recently lost all my custom settings on Firefox after an aggressive tech support person "cleaned" my browser settings. When this happened, I lost the ability to move my open tabs to a new group before closing the window they were in.
Previously, when I had multiple windows open, and I initiated an "Exit" or "Close" command on one of the open windows, 2 things happened:
(1) First I received a warning message asking me if I wanted to close the window
(2) Then I received a second warning message asking me if I wanted to move my tabs before closing the window.
Now, I only receive the 1st message, and I am no longer offered the option of moving my tabs to a new window before closing the current window.
I've tested this both with and without the Tabs Group Manager which I was using prior to the time my browser was "cleaned", and I still have not found a way to restore this missing feature.
Unfortunately, I don't know if this feature/option is:
-- provided as a default in Firefox
-- a customizable feature in Firefox, or
-- a feature in a Firefox add-on.
Can anyone tell me where/how to restore this option to move a group of tabs before closing a window?
Thanks,
Metta

Thank you, guigs2, for your feedback, and my apologies for the confusion. After rereading my question, I realize I made a couple of typos in my original help request which cannot now be corrected. Specifically, the 2nd sentence in the first paragraph should have read:
"I lost the ability to move GROUPS of open tabs to a new WINDOW before closing the window they were in."
This means that, as far as I can tell, neither of your plugin recommendations applies:
-- Apparently, Tab Mix Plus only applies to manipulating tabs WITHIN the existing window and, unless I am missing something, I did not see any reference to the option I'm looking for -- specifically, an automatic prompt offering to move groups of tabs to a new window before closing the existing window.
-- Unfortunately, the other plugin you mentioned (Tag Cloud) appears to be non-functional in the current version of Firefox, based on the most recent user reviews.
In light of this, I will consider the possibility of resubmitting my question with the typos corrected -- and, in the meantime, if there is any additional feedback that you (or anyone else) can offer, I would be most grateful!

What are the correct Send Connectors settings in Exchange 2013

Hi
I'm new to exchange, successfully setup a lab with 2 cashub roles and 2 mailbox roles. I am trying to set the send connectors settings, because I've not been able to send nor receive external email via owa. Since I'm separating the exchange roles, my mailbox
servers only use internal IP settings and cannot resolve external DNS. I'm thinking I need to tick, proxy through CAS for it to work? any suggestions?

Hi
Can you please let us know what version of Exchange that you are using
"I'm new to exchange, successfully setup a lab with 2 cashub roles and 2 mailbox roles"
- Because Exchange 2013 does not hold hub role.
" I am trying to set the send connectors settings, because I've not been able to send
nor receive external email via owa."
It would be great if you could answer few questions so that people can help you out here
Are you able to send emails internally without any issues with Outlook ? If not can you paste the errors.
What error you are getting while trying to send emails through owa . Can you paste the errors.
If you are looking for steps to create new send connector please follow below technet article
http://technet.microsoft.com/en-us/library/aa998936(v=exchg.150).aspxFeel free to post your comments/errors you received to proceed
further
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

Send Connector TAB - Force Closed

Similar Messages

Maybe you are looking for