Send data BPC 5.1 very slow because Antivirus Kaspersky
Dear All....
I have problem with BPC 5.1, the problem when send data to server (send and refresh schedule ). The prosses send data is very slow. I think its because antivirus (Kaspersky), when protection is enable, prosses send data very slow. But when i turn off the protection, prosses send data faster...
The problem is imposible if i turn off protection to every client.
So, what the object, file, application, macro or rule must i exclusion (unscan) with antivirus??
I have already give exclusion to file Ev4DMMPM.xla, but sometime its work, sometime not...
Please help...
Best regards,
Dharma Setiadi
Dear all...
Thanks for attention.....
I have already exclusion folder BPC but still not work. But i think the problem with port. I try turn off scanning with port 80 and its work. I never find slow again...
But the problem, i can't turn off scanning with port 80, its about security. How about if i change port 80 for BPC..?? What is impact with server and with client..?? And whatever that must be noticed in this port changing..?? setting server manager..??
Note : i used multi-server configuration...
Best Regards,
Dharma Setiadi
Similar Messages
-
When I upgrade to yosemite, when I have to send and receive mail is very slow
When I upgrade to yosemite, when I have to send and receive mail is very slow. Mails take a long time to be send and receive, and the mail boxes disconnect frequently. I am using the yosemite mail server and don't have this issue with user with Maverick.
Many ThanksSo let me see if I understood it right... In Mavericks you didn't had this issue, this only happens in Yosemite and you are using Apple Mail, not another mail client. Have you tried in System Preferences > Internet Accounts unchecking and rechecking the email checkbox on your account?? If that doesn't works try deleting and adding your account.
Sorry for the bad English -
Master is very Slow, Because Slave Takes 20 minutes for "startup done"
I have two db env to be backup for each other. I stopped one db env for 5 minutes, then restarted it. I found that it took over 20 minutes to receive the db callback event "startup done". During these time, there were transactions in the master db env. I guess this makes the sync_up process take so long time.
I used the ack policy "DB_REPMGR_ACKS_ONE_PEER" and used "txn no sync" flag for transaction, so during these 25 minutes, master is very slow.
My requirement is master can resume its performance as soon as slave comes back. Can slave accept the log before its sync completed? Or any other way to solve this issue?Most likely what happened is that the stopped dbenv is the only site/peer able to
send the acknowledgement. If it is stopped but not disconnected, then the master
will wait the full ACK timeout for every txn.
It is also likely that during that 5 minutes, log files were archived and when the
stopped dbenv became active again, it had to perform an internal initialization
from scratch. That copies over every page of every database and then the logs
needed to resynchronize. If you have a lot and/or very large database files,
that can take a long time.
The client cannot send any acks until it completes its synchronization. One
way to avoid this would be to perform a manual hot backup to the client before
starting up the application. You would have to copy over all database files, then
all log files from the master (in that order) and then run catastrophic recovery
in that client directory. Then start up your application and the client should be
able to quickly synchronize.
You can control this in the application by setting DB_REP_CONF_NOAUTOINIT
to DB_ENV->rep_set_config. You'll get back an error that tells you that the site
needs an re-initialization and you can do that copying then.
Sue LoVerso
Oracle -
A Power User Can Not Send Data - BPC Release 7.5.112.07 MS
Hi BPC Community,
We have a group of users who are able to send data to locked dimensions. We added a new power user and this person can not send data to locked dimensions (see attached screen-shot). The person is checked box as a "leader" in the Teams responsibility.
Any suggestions?
Thanks. BarryHi
Options
• All = any user with member access write privilege
• Owner = only users assigned as owner with member access write privilege
• Mgr = Owner of parent dimension member is manager of child dimension member
• Locked = no user regardless of authorization.
Controlled By: Determines who can select the work status code
• Both = owner of the specific member ID and the owner of the parent to the specific member ID
• Owner = owner of the specific member ID
• Mgr = owner of the parent to the specific member ID.
also go through below link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2064bb40-ea48-2e10-069c-cc6878a0f1cc?QuickLink=index&…
https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=5&cad=rja&uact=8&ved=0CEIQFjAE&url=https%3A%2F%2Fhelp.sa…
Hope this will help you.
sushant -
Report run very slow because some user accessing the same report
Dear All,
I group my table into 3 tablespace And some reports, accessing different tablespace (more than 1 table space). and these report will always be run by 5 user in the same time. and make it run very slow. Is it going to make the report very slow ? Please advice
Thanks in advance
WidhiHi,
i hope that may not be the actual problem..
if ur report processing includes relatively high
amount of calculations on tables..then the report
processing can be very slow...
In that case try to create a table to store ur calculations
temporarily and try to use that table in the report.. -
Slow performance of fetching BLOB data over network is very slow
Dear Experts,
We are deploying a GIS application which handles with BLOB datatypes. Database Server is in RHEL and in 11gR2. The application is using asp.net 3.5 and using ODP.NET to connect with Oracle. But here is a performance chart which shows that performance is very slow when application and database server lie on different subnetwork.
Case Login Time
Same Server(Both in 192.168.9.23) 20-25 sec
Same Subnet (DB:192.168.9.25) (App: 192.168.9.23) 60-80 sec
Different Subnet (DB:192.168.11.153) (App:192.168.9.23) More then 5 minutes
So what is the reason behind this and how can I improve performance if I want to keep application and database in diff machine?
Thanks in advance.Also, look into the various lob settings in ODP.NET.
I believe that by default in ODP.NET the LOB will be fetched in separate roundtrips but you can change this my messing with certain properties or using certain methods - apologies, a bit imprecise.
If you have a network issue then doing more roundtrips than you need to is just going to exacerbate the situation.
Trace the session - if it's networking or roundtrips you should see symptoms of it in a 10046 trace. -
WebAnalysis/WebAdminServicesConsole very slow (because of java applet)
Hello,
Context: Hyperion System 9.3.1
server1, Windows -> installed Administration Services e BI+ (Workspace, Web Analysis ecc)
server2, AIX -> installed Essbase
The client has externalized the software/hardware so we have:
network A =client's network
network B = Internet Service provider network
network C =network of the society to which client has externalized the hardware
The communication path is: network A -> network B -> network C
server1 and server2 are on network C.
From the client's computers in network A, Web Analysis Studio and Web Administration Services Console (both using java applets)
have very very slow response times. To give you an idea, an blank report in Web Analysis needs 10min to open. With Web Admin Console I can't do anything: in an empty outline, I added 2 dimensions with 1 member each, when I tried 'Save outline' after 20mins of waiting a response the system also freezed.
When I work in remote control directly on server1, Web Analysis studio and Web Admin Console are very very fast.
This happens only with these two components, the other web components not using java applet (Workspace ecc) don't have this problem.
That made me think there is a network issue. But ping and tracert to both servers (1,2) from the client machines gave me positive results.
I don't know what else to test/try.
Any help will be appreciated!
Thank you!
DanielaCiao,
It seems Web Analysis works well only with jre 1.5.0 update 11. I had java 1.6.0 update 4. I had disintalled java 1.6.0_4, installed 1.5.0_11 and now web analysis applet won't even load.
The java console makes me see the following messages (I replaced by hand the real server name with the server_name):
Java Plug-in 1.5.0_11
Uso della versione JRE 1.5.0_11 Java HotSpot(TM) Client VM
Directory principale utente = C:\Documents and Settings\Administrator
c: cancella finestra console
f: finalizza oggetti nella coda di finalizzazione
g: recupera spazio
h: visualizza questo messaggio di aiuto
l: esegui dump dell'elenco classloader
m: stampa utilizzo memoria
o: attiva registrazione eventi
p: ricarica configurazione proxy
q: nascondi console
r: ricarica configurazione criteri
s: esegui dump delle proprietà del sistema e dell'installazione
t: esegui dump dell'elenco thread
v: esegui dump dello stack del thread
x: cancella cache classloader
0-5: imposta livello di traccia su <n>
[WARN] HYABaseClient - -Analyzer Client Version=9.3.1.0.0.248
[WARN] HYABaseClient - -ServerURL=http://server_name/WebAnalysis/processor
[INFO] ProxyHttpClientHelper - -[PROXY_INIT] - Detect proxy settings using JavaPlugin Proxy Service...
[INFO] ProxyHttpClientHelper - -[PROXY_INIT] - Proxy settings missed or bypassed. Go to sever directly
[INFO] ProxyHttpClientHelper - -[PROXY_INIT] - Proxy settings are detected successfully.
java.net.UnknownHostException: server_name
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.SocksSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(Unknown Source)
at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(Unknown Source)
at org.apache.commons.httpclient.HttpConnection.open(Unknown Source)
at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(Unknown Source)
at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(Unknown Source)
at org.apache.commons.httpclient.HttpClient.executeMethod(Unknown Source)
at org.apache.commons.httpclient.HttpClient.executeMethod(Unknown Source)
at com.hyperion.atf.services.distributed.http.HttpRequestProcessor.checkProxySettings(HttpRequestProcessor.java:269)
at com.hyperion.atf.services.distributed.http.HttpRequestProcessor.checkProxySettings(HttpRequestProcessor.java:234)
at com.hyperion.analyzer.usersession_base.HYABaseClient.obtainProxySettings(Unknown Source)
at com.hyperion.analyzer.usersession_base.HYABaseClient.initATF(Unknown Source)
at com.hyperion.analyzer.usersession_base.HYABaseClient.init(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
[WARN] HYABaseClient - -Using Config: config_client.xml
[INFO] SessionScopeBindingToJVM - -Releasing services for session: Unbound/Undefined SessionId
[ERROR] ServiceManager - -Creating dummy lock.
[INFO] SessionScopeBindingToJVM - -Creating token for session: INITIALIZATION
[INFO] HttpRequestProcessor - -ServerURL=http://server_name/WebAnalysis/processor
[INFO] HttpRequestProcessor - -Connect to server DIRECTLY
[INFO] EventHandlerAsynchronous - -Created 3 worker threads.
[ERROR] NamingServiceProxy - -Could not retrieve root entry. <org.apache.commons.lang.exception.NestableRuntimeException: org.apache.commons.lang.exception.NestableException: An error occurred during network communications.>org.apache.commons.lang.exception.NestableRuntimeException: org.apache.commons.lang.exception.NestableException: An error occurred during network communications.
at com.hyperion.atf.services.distributed.clientproxies.NamingServiceProxy.getRootEntry(NamingServiceProxy.java:1008)
at com.hyperion.atf.internal.services.naming.NamingServiceProxy.getRootEntry(NamingServiceProxy.java:119)
at com.hyperion.atf.internal.services.naming.NamingServiceProxy.initialize(NamingServiceProxy.java:102)
at com.hyperion.atf.internal.services.containers.UserSessionContainer.initialize(UserSessionContainer.java:119)
at com.hyperion.atf.services.ServiceManager.setServiceContainer(ServiceManager.java:526)
at com.hyperion.atf.services.ServiceManager.getService(ServiceManager.java:271)
at com.hyperion.atf.services.ServiceManager.setServiceContainer(ServiceManager.java:503)
at com.hyperion.atf.services.ServiceManager.initServiceContainer(ServiceManager.java:463)
at com.hyperion.atf.services.ServiceManager.initialize(ServiceManager.java:661)
at com.hyperion.atf.services.ServiceRegistry.initialize(ServiceRegistry.java:126)
at com.hyperion.analyzer.usersession_base.HYABaseClient.initATF(Unknown Source)
at com.hyperion.analyzer.usersession_base.HYABaseClient.init(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: org.apache.commons.lang.exception.NestableException: An error occurred during network communications.
at com.hyperion.atf.services.distributed.http.HttpRequestProcessor.internalProcess(HttpRequestProcessor.java:480)
at com.hyperion.atf.services.distributed.DistributedRequestProcessorClient.process(DistributedRequestProcessorClient.java:115)
at com.hyperion.atf.services.distributed.clientproxies.NamingServiceProxy.getRootEntry(NamingServiceProxy.java:999)
... 13 more
Caused by: java.net.UnknownHostException: server_name
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.SocksSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(Unknown Source)
at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(Unknown Source)
at org.apache.commons.httpclient.HttpConnection.open(Unknown Source)
at org.apache.commons.httpclient.MultiThreadedHttpConnectionManager$HttpConnectionAdapter.open(Unknown Source)
at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(Unknown Source)
at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(Unknown Source)
at org.apache.commons.httpclient.HttpClient.executeMethod(Unknown Source)
at org.apache.commons.httpclient.HttpClient.executeMethod(Unknown Source)
at com.hyperion.atf.services.distributed.http.HttpRequestProcessor.internalProcess(HttpRequestProcessor.java:466)
... 15 more
[ERROR] UserSessionContainer - -java.lang.IllegalStateException: Root entry is null
[ERROR] UserSessionContainer - -Could not destroy container instance properly "com.hyperion.atf.internal.services.naming.NamingServiceProxy". <java.lang.NullPointerException>java.lang.NullPointerException
at com.hyperion.atf.internal.services.containers.UserSessionContainer.destroy(UserSessionContainer.java:336)
at com.hyperion.atf.internal.services.containers.UserSessionContainer.initialize(UserSessionContainer.java:127)
at com.hyperion.atf.services.ServiceManager.setServiceContainer(ServiceManager.java:526)
at com.hyperion.atf.services.ServiceManager.getService(ServiceManager.java:271)
at com.hyperion.atf.services.ServiceManager.setServiceContainer(ServiceManager.java:503)
at com.hyperion.atf.services.ServiceManager.initServiceContainer(ServiceManager.java:463)
at com.hyperion.atf.services.ServiceManager.initialize(ServiceManager.java:661)
at com.hyperion.atf.services.ServiceRegistry.initialize(ServiceRegistry.java:126)
at com.hyperion.analyzer.usersession_base.HYABaseClient.initATF(Unknown Source)
at com.hyperion.analyzer.usersession_base.HYABaseClient.init(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
[ERROR] ServiceManager - --------------------------
[ERROR] ServiceManager - -Service "naming" was not initialized. Removed from registry.
[ERROR] ServiceManager - -java.lang.IllegalStateException: Could not initalize container for: ServiceRegistration (name=naming, scope=user_session, priority=99, class=com.hyperion.atf.internal.services.naming.NamingServiceProxy, cronned=null)
[ERROR] ServiceManager - --------------------------
[INFO] SessionScopeBindingToJVM - -Releasing services for session: INITIALIZATION
[WARN] SecurityContextManagerProxy - -Could not verify login...will try again. <org.apache.commons.lang.exception.NestableRuntimeException: org.apache.commons.lang.exception.NestableException: An error occurred during network communications.>org.apache.commons.lang.exception.NestableRuntimeException: org.apache.commons.lang.exception.NestableException: An error occurred during network communications.
at com.hyperion.atf.services.distributed.clientproxies.SecurityContextManagerProxy.hasValidSecurityContext(SecurityContextManagerProxy.java:286)
at com.hyperion.atf.security.authentication.SecurityContextManagerProxy.refresh(SecurityContextManagerProxy.java:73)
at com.hyperion.atf.security.authentication.SecurityContextManagerProxy.hasValidSecurityContext(SecurityContextManagerProxy.java:162)
at com.hyperion.atf.security.authentication.SecurityContextManagerProxy.getUser(SecurityContextManagerProxy.java:149)
at com.hyperion.atf.security.authentication.SecurityContextManagerProxy.toString(SecurityContextManagerProxy.java:195)
at java.lang.String.valueOf(Unknown Source)
at java.lang.StringBuffer.append(Unknown Source)
at com.hyperion.atf.internal.services.containers.UserSessionContainer.internalRelease(UserSessionContainer.java:259)
at com.hyperion.atf.internal.services.containers.UserSessionContainer.release(UserSessionContainer.java:219)
at com.hyperion.atf.internal.services.containers.UserSessionContainer.release(UserSessionContainer.java:229)
at com.hyperion.atf.services.ServiceManager.releaseServices(ServiceManager.java:354)
at com.hyperion.atf.services.SessionScopeBindingToJVM.destroy(SessionScopeBindingToJVM.java:34)
at com.hyperion.atf.services.ServiceManager.initialize(ServiceManager.java:682)
at com.hyperion.atf.services.ServiceRegistry.initialize(ServiceRegistry.java:126)
at com.hyperion.analyzer.usersession_base.HYABaseClient.initATF(Unknown Source)
at com.hyperion.analyzer.usersession_base.HYABaseClient.init(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: org.apache.commons.lang.exception.NestableException: An error occurred during network communications.
at com.hyperion.atf.services.distributed.http.HttpRequestProcessor.internalProcess(HttpRequestProcessor.java:480)
at com.hyperion.atf.services.distributed.DistributedRequestProcessorClient.process(DistributedRequestProcessorClient.java:115)
at com.hyperion.atf.services.distributed.clientproxies.SecurityContextManagerProxy.hasValidSecurityContext(SecurityContextManagerProxy.java:277)
... 17 more
Caused by: java.net.UnknownHostException: server_name
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.SocksSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(Unknown Source)
at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(Unknown Source)
at org.apache.commons.httpclient.HttpConnection.open(Unknown Source)
at org.apache.commons.httpclient.MultiThreadedHttpConnectionManager$HttpConnectionAdapter.open(Unknown Source)
at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(Unknown Source)
at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(Unknown Source)
at org.apache.commons.httpclient.HttpClient.executeMethod(Unknown Source)
at org.apache.commons.httpclient.HttpClient.executeMethod(Unknown Source)
at com.hyperion.atf.services.distributed.http.HttpRequestProcessor.internalProcess(HttpRequestProcessor.java:466)
... 19 more
[ERROR] HYABaseClient - -Error while initializing ATF <com.hyperion.atf.services.InitializationException: Could not initialize service manager: 1224512931093>com.hyperion.atf.services.InitializationException: Could not initialize service manager: 1224512931093
at com.hyperion.atf.services.ServiceManager.initialize(ServiceManager.java:678)
at com.hyperion.atf.services.ServiceRegistry.initialize(ServiceRegistry.java:126)
at com.hyperion.analyzer.usersession_base.HYABaseClient.initATF(Unknown Source)
at com.hyperion.analyzer.usersession_base.HYABaseClient.init(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: com.hyperion.atf.services.ServiceManager$ServiceRecursiveInitException: Could not start critical service: "appinit.tasks", all services are being rolled back.
at com.hyperion.atf.services.ServiceManager.setServiceContainer(ServiceManager.java:546)
at com.hyperion.atf.services.ServiceManager.initServiceContainer(ServiceManager.java:463)
at com.hyperion.atf.services.ServiceManager.initialize(ServiceManager.java:661)
... 5 more
org.apache.commons.lang.exception.NestableRuntimeException: org.apache.commons.lang.exception.NestableException: An error occurred during network communications.
at com.hyperion.analyzer.atf.service.clientproxies.HYALicensingServiceProxy.isFeatureEnabled(Unknown Source)
at com.hyperion.analyzer.usersession_base.AnalyzerClient.initShowHideParams(Unknown Source)
at com.hyperion.analyzer.usersession_base.AnalyzerClient.createGUI(Unknown Source)
at com.hyperion.analyzer.usersession_base.HYABaseClient.init(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: org.apache.commons.lang.exception.NestableException: An error occurred during network communications.
at com.hyperion.atf.services.distributed.http.HttpRequestProcessor.internalProcess(HttpRequestProcessor.java:480)
at com.hyperion.atf.services.distributed.DistributedRequestProcessorClient.process(DistributedRequestProcessorClient.java:115)
... 6 more
Caused by: java.net.UnknownHostException: server_name
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.SocksSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(Unknown Source)
at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(Unknown Source)
at org.apache.commons.httpclient.HttpConnection.open(Unknown Source)
at org.apache.commons.httpclient.MultiThreadedHttpConnectionManager$HttpConnectionAdapter.open(Unknown Source)
at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(Unknown Source)
at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(Unknown Source)
at org.apache.commons.httpclient.HttpClient.executeMethod(Unknown Source)
at org.apache.commons.httpclient.HttpClient.executeMethod(Unknown Source)
at com.hyperion.atf.services.distributed.http.HttpRequestProcessor.internalProcess(HttpRequestProcessor.java:466)
... 7 more
Any help will be appreciated! -
Send and reply suddenly are very slow
When I hit reply or send new message I get a spinning ball for several minutes before the new window to reply appears.
Mail used to work rapidly and well for me, but in the last few days it has slowed to an unusable crawl. Any fixes?Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list. Leave checked (enabled) only the port configuration needed to connect to Internet and Built-in Ethernet (in that order if not the same), uncheck (disable) the rest of network port configurations (Parallels in particular, if you have that installed) and see whether that helps — if it doesn’t, turn ON again the ones you want enabled.
-
Data Flow | XML Source | Very Slow with big files (over 1/2 a gig)
hi
I am trying to load a few XML files to a database. one of our proprietary systems load the file in 3-4 minutes however with ssis XML source file it takes over an hour.
can anyone know the reason/help with this?
I tried the delayValidation set to true with no success.
thanks
eddy
eddy.aParsing XML files as data sources in SSIS is not the most efficient. Remember that you have define a WSDL (aka structure of the input file) and once the XML source starts parsing the input file, it has to read every node at every level and make sure it conforms
to the structure defined in the WSDL file before it can start streaming the data out to the downstream components in your workflow.
A half-gig XML file with 150 nodes to parse is going to need some heavy-lifting behind the scenes before you start seeing the rows streamed out. I'd rather recommend that you use either inbuilt .Net classes for XML to parse and extract the data or leverage
SQL scripting to accomplish that. Alternatively, if your upstream system can instead drop the data feed in a flat file format, that'd be more preferable. And if you could hook into their data streaming APIs/end-points directly, that'll work too.
Hope this gets you started in finding the right approach.
- Muqadder. -
Can send mail but it's very slow
Why does OS 10.5.8 mail (3.6) send the simplest e-mail so slowly? Is there a fix for this?
I have the same issue however none of the DNS numbers I have tried changed anything. I have two computers that use bellsouth accounts. Both machines are on the same network but only one sends mail slowly. ????? It takes 30 seconds to contact and send a mail message on one machine and 1 second on the other. I changed DNS numbers from OPEN, bellsouth and Google without any change.
Any help/thought are welcome. -
Data Services Designer - Very Slow on VPN
Hello,
Any idea why Data Services Designer is very slow and many a times goes into Not Responding state. I'm using this client tool to connect to the Data Services Repository + Servers via VPN.
It takes few minutes to load the jobs or to save the changes. Some times hangs.
Wanted to know if anyone is facing similar issues, and any workaround/setup changes to eliminate these delays...
Regards,
Madan
Edited by: Madan Mohan Reddy Zollu on Mar 12, 2010 9:24 AMData Services Designer is communicating with the repo (to store/retrieve objects) and the jobserver (to execute jobs and get status/log files) so if there is a slow network connection, response time in the Designer could become problematic.
One way to solve this is use CITRIX or terminal services to have your Designer close to the database and only screens are send over the slow connection. In the Windows installation guide there is a chapter that documents how to setupDesigner in a (multi-user) Citrix environment. -
My Macbook Pro is going very slow
For some reason my Macbook Pro is going verryy slow. I don't think I have malware or viruses. I ran scans with Anti-Malware-Bytes and am now downloading Sophos. Now for how it goes slow - Say if I play a game.. lets take runescape for instance.. it'll be fine for about 5 minutes then my mouse will start lagging and just the whole computer will. Starting applications, typing.. my letters will come up 3 seconds after I press a key.. I can run firefox (only firefox) and only have 1-3 tabs up without it lagging. If I have youtube up it will lag from time to time too. Netflix goes slow and doesn't play right.
One thing I have noticed is near the top of the laptop ( when it is opened, where it bends to open) it gets very hot. VERY hot. Which ended up making me think why I don't hear a fan, so now I'm thinking its very slow because the fan is not running. I don't know if it is because the fan is not running or if the fan is not running at all. It might just be too quiet for me to hear. Any help would be amazing please. I want to get my old laptop back lolhow would I go about getting it off completly?
I've no idea. If it doesn't come with an uninstall script or app, then it's the developer of the application which should answer that.
what about Sophos? Should I take that off too?
Yes. The bottom line is this. Many anti-virus tools or optimisers install low-level software (eg, kernel extensions, or kexts) which interfere with, or modify the way in which low-level functions of the operating system work. Consequently, they cause problems; to troubleshoot those problems, you need to remove this software.
(Btw, make sure you've applied Apple's Java updates and turned off Java in all your browsers.) -
hi,
11.2.0.2
I have Logical Data Guard which is very slow
select * from v$logstdby
383
-1
32011
COORDINATOR
16116
ORA-16116: no work available
511796345570
6325
0
32557
ANALYZER
16116
ORA-16116: no work available
511796328343
6779
1
32559
APPLIER
16121
ORA-16121: applying transaction with commit SCN 0x0077.297035e2
511796327906
6275
2
32561
APPLIER
16116
ORA-16116: no work available
467
3
32563
APPLIER
16116
ORA-16116: no work available
4725
4
32565
APPLIER
16116
ORA-16116: no work available
251
5
32567
APPLIER
16116
ORA-16116: no work available
3117
6
32569
APPLIER
16116
ORA-16116: no work available
3169
7
32571
APPLIER
16116
ORA-16116: no work available
475
8
32573
APPLIER
16116
ORA-16116: no work available
399
1024
32015
READER
16127
ORA-16127: stalled waiting for additional transactions to be applied
511796345530
1123
1025
32017
BUILDER
16127
ORA-16127: stalled waiting for additional transactions to be applied
511796345530
605
1026
32019
PREPARER
16127
ORA-16127: stalled waiting for additional transactions to be applied
511796328342
2865
1027
32021
PREPARER
16127
ORA-16127: stalled waiting for additional transactions to be applied
511796328338
631
1028
32023
PREPARER
16127
ORA-16127: stalled waiting for additional transactions to be applied
511796328338
5083
1029
32025
PREPARER
16127
ORA-16127: stalled waiting for additional transactions to be applied
511796328343
applying transaction with commit SCN 0x0077.297035e2 is very very very slow
What could be the problem ?
Thanks in advanceHi,
I increased appliers to 20, SGA to 700MB
but still very very slow ...
391
-1
28082
COORDINATOR
16116
ORA-16116: no work available
511796345570
423
0
28449
ANALYZER
16116
ORA-16116: no work available
511796311683
1163
1
28451
APPLIER
16121
ORA-16121: applying transaction with commit SCN 0x0077.296ff3bc
511796310972
611
2
28453
APPLIER
16116
ORA-16116: no work available
361
3
28455
APPLIER
16116
ORA-16116: no work available
943
4
28457
APPLIER
16116
ORA-16116: no work available
313
5
28459
APPLIER
16116
ORA-16116: no work available
331
6
28461
APPLIER
16116
ORA-16116: no work available
2869
7
28463
APPLIER
16116
ORA-16116: no work available
635
8
28465
APPLIER
16116
ORA-16116: no work available
6807
9
31044
APPLIER
16116
ORA-16116: no work available
2603
10
31046
APPLIER
16116
ORA-16116: no work available
2479
11
31048
APPLIER
16116
ORA-16116: no work available
511
12
31050
APPLIER
16116
ORA-16116: no work available
2935
13
31052
APPLIER
16116
ORA-16116: no work available
103
14
31054
APPLIER
16116
ORA-16116: no work available
3119
15
31056
APPLIER
16116
ORA-16116: no work available
3407
16
31058
APPLIER
16116
ORA-16116: no work available
477
17
31060
APPLIER
16116
ORA-16116: no work available
2365
18
31062
APPLIER
16116
ORA-16116: no work available
489
19
31064
APPLIER
16116
ORA-16116: no work available
4849
20
31066
APPLIER
16116
ORA-16116: no work available
7697
1024
28084
READER
16127
ORA-16127: stalled waiting for additional transactions to be applied
511796345530
5417
1025
28086
BUILDER
16127
ORA-16127: stalled waiting for additional transactions to be applied
511796345530
6281
1026
28088
PREPARER
16127
ORA-16127: stalled waiting for additional transactions to be applied
511796311681
471
1027
28090
PREPARER
16127
ORA-16127: stalled waiting for additional transactions to be applied
511796311683
4729
1028
28092
PREPARER
16127
ORA-16127: stalled waiting for additional transactions to be applied
511796311683
255
1029
28094
PREPARER
16127
ORA-16127: stalled waiting for additional transactions to be applied
511796311683 -
I am doing an an aquisition and displaying the data on graphs. When I run the program it is slow. I think because I have the number of scans to read associated with my scan rate. It takes the number of seconds I want to display on the chart times the scan rate and feeds that into the number of samples to read at a time from the AI read. The problem is that it stalls until the data points are aquired and displayed so I cannot click or change values on the front panel until the updates occur on the graph. What can I do to be able to help this?
On Fri, 15 Aug 2003 11:55:03 -0500 (CDT), HAL wrote:
>My performance is very slow when I run graphs. How do I increase the
>speed at which I can do other things while the data is being updated
>and displayed on the graphs?
>
>I am doing an an aquisition and displaying the data on graphs. When I
>run the program it is slow. I think because I have the number of
>scans to read associated with my scan rate. It takes the number of
>seconds I want to display on the chart times the scan rate and feeds
>that into the number of samples to read at a time from the AI read.
>The problem is that it stalls until the data points are aquired and
>displayed so I cannot click or change values on the front panel until
>the updates occur on the graph. What can I do to be a
ble to help
>this?
It may also be your graphics card. LabVIEW can max the CPU and you
screen may not be refreshing very fast.
--Ray
"There are very few problems that cannot be solved by
orders ending with 'or die.' " -Alistair J.R Young -
hi i have ipad mini i cant download any games.. i have internet connection. before i was able to do it but this past few days i cant it says cannot connect to itunes store i didnt update my ipad to ios 7 because it will make my ipad very slow like whT happen to my iphone, is that the reason y i cant
download games anymore?Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
Maybe you are looking for
-
New Development after recent Itunes update
Hi everyone -- Installed the suggested update yesterday (Dec 21, 2010) without error. Later attempted to import a CD (yes it is a silver CD). This did not complete as expected rather ended with a system reset (soft boot). Entered iTunes and discovere
-
How to create a Portlet application in OPM 10.4
Hello, We would like to create a portlet application. The purpose of creation of such application is to embedded this in the portal. Can we get the pointer on this please?
-
Problem in BAPI for stock posting from quality inspection to unrestricted usage
Hi all, I am using BAPI_GOODSMVT_CREATE for stock posting from quality inspection to unrestricted usage Stock against quality inspection lot(not by MB1B) using mvt type 321.The material doc gets created by the BAPI,but actual stock posting is not t
-
IPhoto opens and a white screen appears with no photos
Hi when I open iPhoto it appears on my screen but is white with no photos and then it shuts down. I was just using iphoto last night and everything worked fine. I have over several thousands of photos and do not want to lose them. I know the photos h
-
Do I have to backup my MacBook Pro before Installing Windows?
I have no external hard drives or backup method, so can I install Windows without backing up my Mac? If so has annyone ever installed Windows on their Mac without doing a backup?