Send data directly to a printer from an RT system

forgive my ignorrance here, I have tried searching for this but could find any similar posts.
we currently have a PXI RT system which sends data via the datasocket server to a host PC which is connected to a printer, in the event of an alarm generated by the PXI system an error log is printed by the host PC which contains some timestamp details in text. this config works fine.
i woudl like my PXI RT system to print text data dirctly to a printer connected to the PXI controller unit, is this possible ?
please advise
thanks in advance

I don't see any reason why you wouldn't be able to do this. You will probably have to format the data into some form that the printer will understand. Obviously you will need to establish a connection to the printer via whatever connection it is using. The specific printer you are using will determine what the actual data should look like.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

Similar Messages

Print directly to the printer from Oracle 9I

Please it is possible to print directly to the printer from Oracle 9i without having to show the report on the web.

Please it is possible to print directly to the printer from Oracle 9i without having to show the report on the web.

I can't print using airprint from my iPhone 4. Everything with the phone and the printer and router are up to date. I can print from my iPad 2 with no problems. What's wrong with the iPhone 4?

I can't print using airprint from my iPhone 4. Everything with the phone and the printer and router are up to date. I can print from my iPad 2 with no problems. What's wrong with the iPhone 4?

I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).

Sending reports directly to a printer (commands) 10g Linux

Hi,
Quick question. I am trying to confirm what I need to pass to Oracle Reports Server in order to print directly to the printer (bypassing any Preview or PDF version of the report in Oracle 10g. I am using Linux. We just installed the printer on the server. I modified to the uiprint.txt file under the ORACLE_HOME/tk/admin to point to the new PPD that we copied for that printer to ORACLE_HOME/guicommon/tk/admin/PPD.
Below is the report call I am making. I just want to verify that what I did was correct. I am currently receiving a FRM-41214: Unable to run Report. When I run the same report via the PDF option that displays in a separate browser window, it brings the same report up correctly.
SET_REPORT_OBJECT_PROPERTY('GENERICREPORT', REPORT_FILENAME, LOWER(:MODULE.MODULE_NAME)||'.rep');
SET_REPORT_OBJECT_PROPERTY('GENERICREPORT', REPORT_SERVER, 'rep_inpp37_gt');
SET_REPORT_OBJECT_PROPERTY('GENERICREPORT', REPORT_OTHER, V_OTHER);
-- V_OTHER is my parameters that I pass, such as PARAMFORM=NO, READONLY=yes, PAGESIZE, ORIENTATION, DELIMITER=NONE, and parameters which in this case there are none.
SET_REPORT_OBJECT_PROPERTY('GENERICREPORT', REPORT_DESTYPE, PRINTER);
SET_REPORT_OBJECT_PROPERTY('GENERICREPORT', REPORT_DESNAME, 'gt-ybs-p'); - this is my printer name
V_REP := RUN_REPORT_OBJECT('GENERICREPORT');
When it runs the V_REP line, that's when I get the FRM-41214 error. Just was wanting to verify if what I had passed for the printer commands is correct.
Chris

I forgot one important piece which is why I am asking the question. I am running the report within an Oracle 10g form. I pass all the parameters across to the Reports Server, as seen above. When I run via the PDF option, I just change the DesType to Cache and DesFormat =PDF. When I run with this, it works and displays the report in a new browser window.
I just want to run the report with the exact same parameters but instead of generating a PDF, I want to run the report and send it directly to the printer without previewing it.
Chris

How To send DMS(Documents cv01,cv03n,cv04n) from one sap system to othersap

Hello Experts,
I am working Document management system(CV01,cv02n,cv03n,cv04n)...
I want to send the documents from one SAP system to Other SAP system
Using ALE/Idocs....
Please Help on this any sample programs....or function module....
Thanks
Preethi

Hello,
Please refer to the thread:
How To send DMS(Documents cv01,cv03n,cv04n) from one sap system to othersap
Best Regards, Murugesh AS

When send the report directly to the printer from Oracle IDS 9i

Hi.....
I m using Oracle IDS 9i, Oracle AS 9i and Database 9i for my new project.But i m facing a problem when i m trying to show a report from oracle IDS 9i.When i send the report directly to the printer without showing it,then the printer connected to the application server is working.But the printer connected to with PC(From where a send the command) is not working but printer connected with AS is working,but not that one which one i m wanting.....Why this problem is happening?Can anyone help me?
KSI

Note:It is always better to have network based printers rather then PC shared printers. What that means is your printer is not connected to a PC. It has a direct connection to the network via NIC. You would then setup the printer on your AS in the printers setup. If the AS is rebooted you do not need to authenticate the printer shares again with a network based printer.
If I understand you correctly, you have a printer connected to your AS(application server) and a printer connected to your PC. You can submit a report direct to the printer connected to the AS but cannot send a report direct to your printer connected to your PC.
From the symptoms you described, the problem is usually associated with the AS not being able to see the printer shared on your PC. You either have the address to your printer address defined wrong or your AS is trying to direct a job to your printer but doesn't have rights to do it.
First, Try to print a notepad job to your printer attached to your PC from the AS. This will tell you if you have access to do so or not.
- If it can't, you need to figure out why? This has nothing to do with oracle.
Second, thing to check is your Oracle "Report Queue Manager" on the AS. Make sure that you can submit a report manually from the Report Queue Manager. If it fails the "Report Queue Manager" will give you useful errors as to why it failed. This will help you isolate the problem.
Third, Once you can submit a job from the reports queue manager manually to your shared printer you should be able to submit from your application direct. If it still does not work your address to the printer is incorrect. Try submitting manually through the reports queue manager again. When selecting printer you will be given a list of accessible printers from the AS. Select the one connected to your PC. Once selected the full network address will appear. Copy and use this as the printer location in your job submission through your application.
That's it... Where using this right now and it works great. Hope this helps.
Eric.

Sending data directly from BW To Oracle DW via Open hub Third party tools

HI All
We need to send data from SAP BW 7.0 to Oracle 11g DW. The requirement is to pass data through open hubs. So we wanted to explore the option of directly passing the data from BW to Oracle using third party tools. So i tried to gather information on the third party tools and came across list of APIs and some pointers on creating a RFC through SM59. But dont know how to do it or what parameters to pass. Could you please point me in the direction or list me step by step detailed instructions as to how I can achieve this?

Hi Amit..
I can see the following will make things work for you.
1) BODS.
2) PI ( XI).
3) BI7.0 to FTP and from FTP you to push these tp your oracle system..
Regards,
rajesh

HP OfficeJet 8500A Premium doesn't print from wireless (operating system is XP with service pack 3)

From all indications, my HP OfficeJet Pro 8500A Premium is connected to the network. But, when I send an item to print from my iPhone via email or from my computer via email, all I get is a message that says my print job has been received, but my printer is busy printing other stuff--which it isn't.
I have the HP ePrint app on my iPHone, and I can sit near the ocmputer and printer and print a picture from my iPhone using this app. But I cannot print using the printer's email address. and, yes, I've double checked the address.
Any ideas? thanks

Hi there, when you check the printer job history in your ePrintCenter account what do you see? Is there a record of the failed print jobs? Here's a link to a post with some troubleshooting steps for ePrint connectivity issues. Take a look at the suggestions here and try them in the order they are presented http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/ePrint-Apps-Connectivity-Troubleshooting-Pleas...
Hope this information helps to resolve your problem. Best of luck.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Unable to print from my Mac system, but my other computers work

Have you encountered a problem printing from your Mac computer and it seems to work from everything else?
I have looked at several posts regarding to printing from a Mac. PrintDoc seems has a solution that can resolve most of the printing issues from Mac when other devices work.
1. Reset the printing system by clicking on Mac OS X: How to reset the printing system and following the steps exactly. This will reset just the printing system back to a fresh start. This works for 10.5 to 10.7.
2. Download and install the driver package Apple has here. This driver package will work for most HP printers. There is a link at the bottom of the driver page to verify that your printer is included. If it is not, check HP's support and drivers page at www.hp.com to download the right driver package for your printer.
This will resolve printing issues on Mac systems when the problem is isolated to the Mac.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓
This question was solved.
View Solution.

I just wanted to share this information as this seems to be an issue that arises and has an easy fix.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

DATA Migration Strategy of Inventory from one SAP system to another

Hi,
We are migrating data from one sap system to another due to business split . I would like to know what are the considerations, dos and donts for inventory/stock balance migration.
Appreciate your responses on the same.
Kind regards,
Tanuja

Hi
Here are some of the links for Data migration in SAP which may be really helpful for you..Please have a look at them.
http://www.packtpub.com/article/data-migration-sap-business-one-part1
http://www.sap-press.de/download/dateien/1468/sappress_migrating_your_sap_data.pdf
http://sceisqaweb.sc.gov/documents/Agencies-Approach-and-Plan-for-Data-Conversion.pdf
Thanks.

How to send data (file and text both) from jsp to servlet

upload JSP
case 1>> if i am using this <form enctype="multipart/form-data" the file value is comming on the servlet side
         and other vales are not comming when i am using request.get parameter(....);
case 2>> if i am using this <form type="text/html" the "submissionperiod" and "Types" value is comming on the servlet but the file is not comming ........
     How to resolve this issue . i need to send all the three parameter on single submit and retrieve the parameter values in my servlet .
please help !
<form enctype="multipart/form-data" name="form" method="post" action="Upload" >
                <table font size="3" style="color:brown;font-family:Arial" >
                <tr>
                <td>Submission Year:    </td>
                <td><select name="submissionperiod">
                     <option value="">--select--</option>
                     <option value="2000">2000</option>
                     <option value="2001">2001</option>
                     <option value="2002">2002</option>
                     <option value="2003">2003</option>
                     <option value="2004">2004</option>
                     <option value="2005">2005</option>
                     <option value="2006">2006</option>
                     <option value="2007">2007</option>
                     <option value="2008">2008</option>
                     <option value="2009">2009</option>
                </select><label class="Required">*</label></br></td>
                </tr>
                <tr>
                <td>Submission Type :    </td>
                <td><select name="types"   onchange="showDescription()">
                     <option value="">--select--</option>
                     <option value="CRF">CRF</option>
                     <option value="NIR">NIR</option>
                     <option value="NC">NC</option>
                     <option value="SEF">SEF</option>
                </select><label class="Required">*</label></br></td>
               </tr>
               <tr><td></td><td>
               <div id="divTypeDetails">
                <textarea id= "subTypeDes" name="subTypeDes" value=""></textarea></br></br>
              </div>
              </td>
          </table>
          <td>Select a file (< 100 MB):   </td>
          <td><input id="importFile" name="importFile" type="file"></br>
          </td>
          <input type="hidden" name="types">
          <input type="hidden" name="submissionperiod">
          <input type="submit" id="submitButton" name="submit" value="Upload" onclick = "checkUploadValidity();"/>
          <input type="button" name=btncancel id=btncancel value="cancel" onclick= "btncancel_click()"/>
</form>

Both the file and text values are included in the binary inputstream of the request. The parametermap is always empty.
There exist 3rd party API's to parse multipart/form-data streams, such as [Apache Commons FileUpload API|http://commons.apache.org/fileupload].
Read at least the 'User Guide' and 'Frequently Asked Questions' sections.

Print Report data directly to a printer

Hi
we are working on forms11g reports11g and oracle11g DB. working in AIX system. My client system is windows7.
when printing reports, once clicks the print button iam generating the PDF report (actually generate in server) using webuitl bring it to client and printing the report connected to the user system.
But if a printer is installed in the server(may be many printers are installed), how can print the report to my desired printer. how can be achieved this .
please suggest your valuable solution with example.
a..

Hi,
check this link. Re: How can I Send report output to 3 different printer programatically
http://docs.oracle.com/cd/E21764_01/bi.1111/b32121/pbr_dest.htm
Edited by: HamidHelal on May 2, 2012 11:43 AM

Date Format in Check Printed from F110

Hi,
I'm on 4.6C.
Company: US10 (United states local configuration)
I'm doing the check printing thru Tcode F110 and for printing we are using program RFFOUS_C. Earlier we were getting date format as MM.DD.YYYY but if vendor is form Spain (I'm not sure) I have started getting format as DD/MM/YYYY.
Why?. Should I change vendor's country to US on Tcode FK03?
I have checked the user setting (Tcode SU3) of the person who did the printing, in that also the date format is MM.DD.YYYY.
A lot of thanks in advance.
Best Regards,

Hi Sid,
Thanks for your quick answer.
My Date's fields in RFFOUS_C are: &REGUH-ZALDT& and &REGUP-BldAT&
/: SET DATE MASK = 'MM.DD.YYYY'
OR
/: SET REGUH-ZALDT MASK = 'MM.DD.YYYY' ????
I must set date mask in every window??
a lot of thanks in advance.
best regards

Data load into SAP ECC from Non SAP system

Hi Experts,
I am very new to BODS and I have want to load historical data from non SAP source system into SAP R/3 tables like VBAK,VBAP using BODS, Can you please provide steps/documents or guidelines on how to achieve this.
Regards,
Monil

Hi
In order to load into SAP you have the following options
1. Use IDocs. There are several standard IDocs in ECC for specific objects (MATMAS for materials, DEBMAS for customers, etc., ) You can generate and send IDocs as messages to the SAP Target using BODS.
2. Use LSMW programs to load into SAP Target. These programs will require input files generated in specific layouts generated using BODS.
3. Direct Input - The direct input method is to write ABAP programs targetting on specific tables. This approach is very complex and hence a lot of thought process needs to be applied.
The OSS Notes supplied in previous messages are all excellent guidance to steer you in the right direction on the choice of load, etc.,
However, the data load into SAP needs to be object specific. So targetting merely the sales tables will not help as the sales document data held in VBAK and VBAP tables you mentioned are related to Articles. These tables will hold sales document data for already created articles. So if you want to specifically target these tables, then you may need to prepare an LSMW program for the purpose.
To answer your question on whether it is possible to load objects like Materials, customers, vendors etc using BODS, it is yes you can.
Below is a standard list of IDocs that you can use for this purpose to load into SAP ECC system from a non SAP system.
Customer Master - DEBMAS
Article Master - ARTMAS
Material Master - MATMAS
Vendor Master - CREMAS
Purchase Info Records (PIR) - INFREC
The list is endless.........
In order to achieve this, you will need to get the functional design consultants to provide ETL mapping for the legacy data to IDoc target schema and fields (better to ahve sa tech table names and fields too). You should then prepare the data after putting it through the standard check table validations for each object along with any business specific conversion rules and validations applied. Having prepared this data, you can either generate flat file output for load into SAP using LSMW programs or generate IDoc messages to the target SAPsystem.
If you are going to post IDocs directly into SAP target using BODS, you will need to create a partner profile for BODS to send IDocs and define the IDocs you need as inbound IDocs. There are few more setings like RFC connectivity, authorizations etc, in order for BODS to successfully send IDocs into the SAP Target.
Do let me know if you need more info on any specific queries or issues you may encounter.
kind regards
Raghu

Javascript to Send data from to printer.

I have a text input widget in captivate whose data is stored in a variable called "myVar". i want to send this data to printer when user presses the print button which executes javascript. can anybody give the javascript code for this.

Hi there
I don't believe you will find any such code exists anywhere. It's my own experience that with something like JavaScript, all you can really do is to cause the Print dialog to appear. You cannot bypass that dialog and send things directly to the printer.
Perhaps in a Flash Widget you would create it's possible. There are many things possible in Flash. But even so, I might think all calls would still evoke the Print dialog as there would be no way to know which printer to direct things to if more than one were connected.
I'll leave it to Rod or others well versed in the black arts of Flash to answer that.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Send data directly to a printer from an RT system

Similar Messages

Maybe you are looking for