Send Data from BPC to BW
Hi All,
We have a requirement to send the data from BPC->BW for reporting in BW. I am using the APD technique to do the same. My question is will this method be affected if the corresponding application in BPC on which the export query is built be full optimized?. Please explain me the pros and cons of this methodology.
Thanks in advance,
Vinod.
Hi,
In your case, there is nothing to worry about.
When you have more than 13 dimensions (BW characteristics), the system tries to combine these characteristics into BW dimensions (different from BPC dimensions). There might be few characteristics (BPC dimensions) clubbed together into a single BW dimension. And in this case, the cube is re-designed and the technical name changes.
However, since you have 13 dimensions, there is nothing to worry.
Hope this helps.
Similar Messages
-
How to retract data from BPC Netwaver to SAP R/3
Hi all,
I have three questions concerning the retraction of data from BPC to R/3:
1)Can someone explain me how i can send data from BPC to R/3 (via SAPBI)??
2)What's a better choice => Can i do this from an infocube or a DSO?
3)And what is the role of the BAPI's "BAPI_0050_CREATION" and "BAPI_TRANSACTION_COMMIT"
Or are those not important?hi,
The push principle shows a workaround to start an extractor from the source system.... for this you can try APDs (esp for CRM system)and open hub destinations(OH).
or
kindly refer to below document which describes about the COPA retraction as an example for the same
http://tleterme.developpez.com/bw/how/HowTo_COPA_Retraction.pdf
also below thread explain that in detail about retractionand has diff links that might be helpful to you
Retractors to SAP ECC from SAP BI
regards
laksh -
EPM add-in for Excel question : How to send data from local member?
Dear experts,
for EPM add-in for excel, how do I send data from local member?
best regards,
Evans.Hello Evans,
Could you please explain what is your requisite? What is the formula on your local member?
You can also apply formulas to formatting sheet. This way you can reference the cells in your formatting sheet formulas and save the values in the report area.
Please check this blog:
How to use Excel formulas in BPC Input Schedules
Thank you
Best regards,
Raquel Oliveira -
Badi: move data from bpc cube to bw cube
Hi friends,
I would like to move data from bpc application(i.e bpc cube) to bw cube. Bpc cube having infoobjects starting with /cpmb/* and bw cube having infoobjects starting with y* .
I want to write badi code to move data from bpc cube to bw cube? is it possible to move data via badi in our case?
I know through APD its possible to move. Any suggestions pls. we are on bpc 75 nw sp04
Thanks,
nareshHi Naresh!!!
I am doing the same stuff...... and got the data read inside the BAdI and converted the comma seperated into a properly structured table... but i dont know how to send this field symbol structure to a normal table. can you help me!!!!??? can you give me your contact details.... please
Regards,
Surya Tamada. -
How to send data from internal table to the shared folder in ABAP
Hi experts,
My requirement is to transfer data from a file to shared folder. i just did reading data from a file to a internal table. Now i want to send this internal table data into a shared folder which is "
xxx\y\z....".
I do not have any idea on how to send data from internal table to the shared folder path.
can anybody please help me out how to do this?
Thanks & Regards
Sireesha.Where that folder is located, its on presentation server i.e. desktop or application server.
If its on presentation server, use FM GUI_UPLOAD.
If its on application server, then use DATASET functions. Have a look at below link.
[File Handling in ABAP|http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm]
I hope it helps.
Thanks,
Vibha
Please mark all the useful answers -
Problem with Runtime Workbench and with sending data from XI to SLD
Hello<br>
<br>
Could I have a little help, a hint in the two following topics:<br>
<br>
1. I run Runtime Workbench -> Component Monitoring -> Display All and I get this error:<br>
<br>
Error during communication with System Landscape Directory: User credentials are invalid or user is denied access<br>
<br>
In filesystem log I can find like this:<br>
<br>
XIRWB.com.sap.aii.mdt.frames.jsp_error [SAPEngine_Application_Thread[impl:3]_40] Fatal: Error during communication with System Landscape Directory: User credentials are invalid or user is denied access<br>
Thrown:<br>
MESSAGE ID: com.sap.aii.rwb.agent.server.rb_LCRAgent.landscapeCommunicationError<br>
com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: User <br>credentials are invalid or user is denied access
at com.sap.aii.rwb.agent.server.SLDAgentBean.convertException(SLDAgentBean.java:1472)
at com.sap.aii.rwb.agent.server.SLDAgentBean.buildSLD(SLDAgentBean.java:773)
at com.sap.aii.rwb.agent.server.SLDAgentBean.provideSld(SLDAgentBean.java:269)
at com.sap.aii.rwb.agent.server.SLDAgentBean.getXIDomain(SLDAgentBean.java:711)
at com.sap.aii.rwb.agent.api.SLDAgentObjectImpl0_0.getXIDomain(SLDAgentObjectImpl0_0.java:375)
at com.sap.aii.rwb.agent.api.SLDAgent_Stub.getXIDomain(SLDAgent_Stub.java:436)
at com.sap.aii.rwb.agent.client.EJBAgent.getXIDomain(EJBAgent.java:255)
at com.sap.aii.rwb.util.web.model.AppMainModel.getSelectedDomain(AppMainModel.java:138)
at com.sap.aii.rwb.util.web.model.DomainRep.build(DomainRep.java:121)
at com.sap.aii.rwb.web.componentmonitoring.model.ObjectIdentificationTree.getComponentTree(ObjectIdentificationTree.java:117)<br>
at jsp_component_monitoring1321125174985._jspService(jsp_component_monitoring1321125174985.java:217)
at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:68)
at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doGet(CmPageProcessor.java:27)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at jsp_FC_Secure1321125169379._jspService(jsp_FC_Secure1321125169379.java:24)
at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)<br>
Root cause:<br>
com.sap.lcr.api.cimclient.UnauthorizedUserException: User credentials are invalid or user is denied access<br>
at com.sap.lcr.api.cimclient.HttpRequestSender.processResponse(HttpRequestSender.java:577)
at com.sap.lcr.api.cimclient.HttpRequestSender.send(HttpRequestSender.java:341)
at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:280)
at com.sap.lcr.api.cimclient.CIMOMClient.performBatchOperation(CIMOMClient.java:1251)
at com.sap.lcr.api.cimclient.CIMClient.performBatchOperation(CIMClient.java:2268)
at com.sap.aii.utilxi.sld.MRSldProxy.stage1(MRSldProxy.java:989)
at com.sap.aii.utilxi.sld.MRSldProxy.loadComponents(MRSldProxy.java:918)
at com.sap.aii.utilxi.sld.MRSldProxy.loadSld(MRSldProxy.java:907)
at com.sap.aii.utilxi.sld.SubSystemFactory.createSldFromSld(SubSystemFactory.java:373)
at com.sap.aii.utilxi.sld.SubSystemFactory.createSldFromSld(SubSystemFactory.java:434)
at com.sap.aii.rwb.agent.server.SLDAgentBean.buildSLD(SLDAgentBean.java:764)
at com.sap.aii.rwb.agent.server.SLDAgentBean.provideSld(SLDAgentBean.java:269)
at com.sap.aii.rwb.agent.server.SLDAgentBean.getXIDomain(SLDAgentBean.java:711)
at com.sap.aii.rwb.agent.api.SLDAgentObjectImpl0_0.getXIDomain(SLDAgentObjectImpl0_0.java:375)
at com.sap.aii.rwb.agent.api.SLDAgent_Stub.getXIDomain(SLDAgent_Stub.java:436)
at com.sap.aii.rwb.agent.client.EJBAgent.getXIDomain(EJBAgent.java:255)
at com.sap.aii.rwb.util.web.model.AppMainModel.getSelectedDomain(AppMainModel.java:138)
at com.sap.aii.rwb.util.web.model.DomainRep.build(DomainRep.java:121)
at <br>com.sap.aii.rwb.web.componentmonitoring.model.ObjectIdentificationTree.getComponentTree(ObjectIdentificationTree.java:117)
at jsp_component_monitoring1321125174985._jspService(jsp_component_monitoring1321125174985.java:217)
at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:68)
at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doGet(CmPageProcessor.java:27)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at jsp_FC_Secure1321125169379._jspService(jsp_FC_Secure1321125169379.java:24)
at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
<br>
<br>
<br>
I don't know what is wrong.<br>
I have configured:<br>
- SLDCHECK work properly,<br>
- none of the users PI* type not lock,<br>
- password to the PI* users in exchangeProfile entered correctly,<br>
- In VA in the JCo RFC Provider I have properly configure: AI_RUNTIME_JCOSERVER, LCRSAPRFC, SAPSLDAPI_SID - from the ABAP I can connect to this programs ID<br>
- In VA in SLD Data Supplier I have properly configure bookmarks HTTP Settings and CIM Client Generation Settings. CIMClient Test is OK<br>
<br>
I do not know what else I can see, what else I have properly configured ... I looked at the notes:: 936093 jak i 721548...<br>
<br>
<br>
2. I can't send data from XI to SLD, ie makes me a system definition in Web As Abap and Web as Java but nothing appear to me in Exchange Infrastructure. Exchange Infrastructure is empty - what is wrong??<br>
I carried out the recommendation by 764176 and 1031321 notes<br>
<br>
I restart below applications (no effect)...<br>
com.sap.xi.directory (Integration Builder/Configuration)<br>
com.sap.aii.af.app (Adapter Engine)<br>
com.sap.xi.rwb (Runtime Workbench)<br>
com.sap.xi.repository (Integration Builder/Design)<br>
<br>
Can I ask for help and guidance in these topics?<br>
<br>
Regards<br>
RP<br>I increased logging in the NWA (Configuration -> Log Configuration) - and increased the some things here to log ALL. So that from the NWA (Monitoring -> Logs and Traces) I see a little more information (but does not follow that with which the user is a problem).<br>
<br>
Here are some interesting logs ...<br>
I was most rash or irritation of those that say about the lack of credentials u2013 I must use Viusal Administrator and set good service ...<br>
<br>
What do I have done:<br>
In the Visual Administrator -> Cluster -> Server -> Services -> SLD Data Supplier<br>
I have set in the HTTP Settings tab the host and port SLD, the user name and password is also entered as it is in the SLD. To be sure, already have set for the user entered here such roles as:<br>
SAP_SLD_ADMINISTRATOR<br>
SAP_SLD_CONFIGURATOR<br>
SAP_SLD_DEVELOPER<br>
SAP_SLD_GUEST<br>
SAP_SLD_ORGANIZER<br>
Maybe we are talking in this place about a different user?<br>
<br>
Similarly, when it comes to tab CIM Client Generation Settings - here's all the same thing done. CIMClient test shows that everything is OK.<br>
When I click the button: This trigger the transfer of data to the SLD gets the message that everything was shipped correctly. Indeed, I received an instance of JAVA in SLD<br>
Also clicked on this icon: Assign application roles to user group - got information that everything is attached properly.<br>
<br>
By ABAP side, the connections: INTEGRATION_DIRECTORY_HMI, SAPSLDAPI, LCRSAPRFC, AI_RUNTIME_JCOSERVER and AI_DIRECTORY_JCOSERVER work correctly, ie I can perform the test - which means that programs ID are properly positioned in JCO Provider in VA.<br>
<br>
Puzzling is this message:<br>
The SLD data is inconsistent.<br>
<br>
Strange also that the message (from the ABAP everything is available in SMGW no errors):<br>
Connect to SAP gateway failed<br>
<br>
And what is this error:<br>
<br>
could not sync ExchangeProfile: <br>
Thrown:<br>
com.sap.rprof.dbprofiles.DBException: Connect to SAP gateway failed<br>
Connect_PM TYPE=A ASHOST=saptest2 SYSNR=60 GWHOST=saptest2 GWSERV=sapgw60 PCS=1<br>
<br>
LOCATION CPIC (TCP/IP) on local host with Unicode<br>
ERROR partner 'saptest2:sapgw60' not reached<br>
TIME Thu Feb 23 07:28:07 201<br>
RELEASE 700<br>
COMPONENT NI (network interface)<br>
VERSION 38<br>
RC -10<br>
MODULE nixxi.cpp<br>
LINE 2513<br>
DETAIL NiPConnect<br>
SYSTEM CALL connect<br>
ERRNO 79<br>
ERRNO TEXT A remote host refused an attempted connect operation.<br>
COUNTER 2<br>
<br>
<br>
Below is a list of some interesting logs ...<br>
<br>
###########<br>
<br>
Insufficient permissions for getting SLD access information. You can add permissions for your application via the SLD service in the 'Visual Administrator'.<br>
<br>
#############<br>
<br>
SLD is not accessible. Check SLD Data Supplier service settings.<br>
<br>
###########<br>
<br>
"Warning","2012-02-22","07:53:50:986","Data get on com.sap.sldserv.data.GetSAPBCCentralServiceInstance class processing failed. htThe SLD data is inconsistent. This is an internal processing problem.","/System/Server/SLDService","com.sap.sldserv.DataCollector","n/a","saptest2","Server 0 60_36694",<br>
<br>
#########<br>
<br>
com.sap.lcr.api.cimclient.UnauthorizedUserException: User credentials are invalid or user is denied access<br>
<br>
################<br>
<br>
Full Message Text
CPA Cache not updated with directory data, due to: Couldn't open Directory URL (http://saptest2.unx.era.pl:56000/dir/hmi_cache_refresh_service/ext?method=CacheRefresh&mode=C&consumer=af.xit.saptest2), due to: HTTP 503: Service Unavailable
<br>
##################<br>
<br>
Full Message Text <br>
<br>
could not sync ExchangeProfile: <br>
Thrown:<br>
com.sap.rprof.dbprofiles.DBException: Connect to SAP gateway failed<br>
Connect_PM TYPE=A ASHOST=saptest2 SYSNR=60 GWHOST=saptest2 GWSERV=sapgw60 PCS=1<br>
<br>
LOCATION CPIC (TCP/IP) on local host with Unicode<br>
ERROR partner 'saptest2:sapgw60' not reached<br>
TIME Thu Feb 23 07:28:07 201<br>
RELEASE 700<br>
COMPONENT NI (network interface)<br>
VERSION 38<br>
RC -10<br>
MODULE nixxi.cpp<br>
LINE 2513<br>
DETAIL NiPConnect<br>
SYSTEM CALL connect<br>
ERRNO 79<br>
ERRNO TEXT A remote host refused an attempted connect operation.<br>
COUNTER 2<br>
<br>
Connect_PM TYPE=A ASHOST=saptest2 SYSNR=60 GWHOST=saptest2 GWSERV=sapgw60 PCS=1<br>
<br>
LOCATION CPIC (TCP/IP) on local host with Unicode<br>
ERROR partner 'saptest2:sapgw60' not reached<br>
TIME Thu Feb 23 07:28:07 201<br>
RELEASE 700<br>
COMPONENT NI (network interface)<br>
VERSION 38<br>
RC -10<br>
MODULE nixxi.cpp<br>
LINE 2513<br>
DETAIL NiPConnect<br>
SYSTEM CALL connect<br>
ERRNO 79<br>
ERRNO TEXT A remote host refused an attempted connect operation.<br>
COUNTER 2<br>
<br>
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:457)<br>
at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1015)<br>
at com.sap.mw.jco.JCO$Client.connect(JCO.java:3238)<br>
at com.sap.rprof.dbprofiles.DBProfiles.getProfile(DBProfiles.java:101)<br>
at com.sap.rprof.dbprofiles.RemoteProfile.readRemoteProfileFromMedia(RemoteProfile.java:1288)<br>
at com.sap.rprof.dbprofiles.RemoteProfile.getRemoteProfileFromFactory(RemoteProfile.java:195)<br>
at com.sap.aii.utilxi.prop.rprof.ExchangeProfilePropertySource.readProfile(ExchangeProfilePropertySource.java:177)<br>
at com.sap.aii.utilxi.prop.rprof.ExchangeProfilePropertySource.sync(ExchangeProfilePropertySource.java:165)<br>
at com.sap.aii.utilxi.misc.api.AIIProperties.sync(AIIProperties.java:582)<br>
at com.sap.aii.af.service.sld.SLDAccess.syncExchangeProfile(SLDAccess.java:43)<br>
at com.sap.aii.adapter.xi.ms.SLDReader.fire(SLDReader.java:52)<br>
at com.sap.aii.adapter.xi.ms.SLDReader.run(SLDReader.java:167)<br>
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)<br>
at java.security.AccessController.doPrivileged(AccessController.java:219)<br>
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)<br>
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)<br>
<br>
##############<br>
<br>
Full Message Text <br>
<br>
Import of software component version list from component repository failed<br>
Thrown:<br>
com.sap.lcr.api.cimclient.LcrException: User credentials are invalid or user is denied access<br>
at com.sap.lcr.api.cimclient.HttpRequestSender.processResponse(HttpRequestSender.java:577)<br>
at com.sap.lcr.api.cimclient.HttpRequestSender.send(HttpRequestSender.java:341)<br>
at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:198)<br>
at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:146)<br>
at com.sap.lcr.api.cimclient.CIMOMClient.enumerateInstancesImpl(CIMOMClient.java:443)<br>
at com.sap.lcr.api.cimclient.CIMOMClient.enumerateInstances(CIMOMClient.java:747)<br>
at com.sap.lcr.api.cimclient.CIMClient.enumerateInstances(CIMClient.java:980)<br>
at com.sap.lcr.api.sapmodel.JavaCIMObjectAccessor.enumerateInstances(JavaCIMObjectAccessor.java:211)<br>
at com.sap.lcr.api.sapmodel.SAP_SoftwareComponentAccessor.enumerateInstances(SAP_SoftwareComponentAccessor.java:204)<br>
at com.sap.lcr.api.sapmodel.SAP_SoftwareComponentAccessor.enumerateSAP_SoftwareComponentInstances(SAP_SoftwareComponentAccessor.java:239)<br>
at com.sap.aii.ibrep.server.sldaccess.interfaces.CRAccess.getSwcLinks(CRAccess.java:82)<br>
at com.sap.aii.ibrep.server.extobjects.SwcAccessor.getEoLinks(SwcAccessor.java:59)<br>
at com.sap.aii.ib.server.extobjects.EOAServiceImpl.getEoLinks(EOAServiceImpl.java:75)<br>
at com.sap.aii.ib.sbeans.extobjects.EOAServiceBean.getEoLinks(EOAServiceBean.java:66)<br>
at com.sap.aii.ib.sbeans.extobjects.EOAServiceRemoteObjectImpl1_0.getEoLinks(EOAServiceRemoteObjectImpl1_0.java:527)<br>
at com.sap.aii.ib.sbeans.extobjects.EOAServiceRemoteObjectImpl1_0p4_Skel.dispatch(EOAServiceRemoteObjectImpl1_0p4_Skel.java:232)<br>
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)<br>
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)<br>
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)<br>
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)<br>
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)<br>
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)<br>
at java.security.AccessController.doPrivileged(AccessController.java:219)<br>
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)<br>
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)<br>
<br>
##############<br>
<br>
Full Message Text <br>
<br>
An exception was thrown in the UME/ABAP user management connector. Message: Connect to SAP gateway failed<br>
Connect_PM TYPE=A ASHOST=localhost SYSNR=60 GWHOST=localhost GWSERV=sapgw60 PCS=1<br>
<br>
LOCATION CPIC (TCP/IP) on local host with Unicode<br>
ERROR partner '127.0.0.1:sapgw60' not reached<br>
TIME Thu Feb 23 07:28:06 201<br>
RELEASE 700<br>
COMPONENT NI (network interface)<br>
VERSION 38<br>
RC -10<br>
MODULE nixxi.cpp<br>
LINE 2513<br>
DETAIL NiPConnect<br>
SYSTEM CALL connect<br>
ERRNO 79<br>
ERRNO TEXT A remote host refused an attempted connect operation.<br>
COUNTER 16<br>
<br> -
How is the best way to send data from local database into remote database ?
Hi all,
I need to send data from local Oracle database into remote oracle database. Both sites connected via 128 kbps frame relay connection.
The sending need to be done once a week, can be done nightly.
How is the best way to do this ?
Thank you very much,
xtantoHow is the best way to do this ?How much are you planning to send?
You can use COPY command. Ensure that you have valid database link between two databases.
Available options are:
create - creates a new table. errors out if the destination table exists.
replace - drop the destination table and re-creates with data.
insert - inserts data if the destination table exists.
append– appends data into an existing table.
use set arraysize 5000 -The arraysize specifies the number of rows that SQL*Plus will retrieve from the database at one time.
copy from scott/tiger@ORCL to scott/tiger@ORCL92 create new_emp using select * from emp; -
How to extract data from BPC InfoCube via ABAP program?
Hi experts!!
I tried to extract data from a BPC InfoCube via ABAP program, but I did'n have succeed.
I used the function 'RSDRI_INFOPROV_READ' to extract data from standard InfoCubes such as '0COPC_C07' and it run OK! However, when I change the InfoCube name to '/CPMB/WAIX8NE' (BPC InfoCube), everything goes wrong...
Is there any difference between extracting data from BPC and standard InfoCubes?
Thank you all!Moderator message - Welcome to SCN.
But please do not cross and duplicate post.
Thread locked.
Rob -
I would like to use DDE to send data from a Lookout Server to an Excel
Hello National Instruments,
I would like to use DDE to send data from a Lookout Server to an Excel
Spreadsheet.
I have Lookout 6.1 on a server connected to 4 client workstations
The operating system on the server is Windows Server 2003 R2; Standard Edition;
Service Pack 2
I have opened DDE Share but after filing in Share Name; Static Application
Name; Static Topic Name
I get a message, "Can't bind to DSDM service"
I also get this message when I press add a Share
What are the steps to setting up this type of communications link?
Thanks,
David Lopez
Scada Functional AnalystRyan,
I have followed the steps on the Knowledge Base "How do I use DDE To Send Data Across the Network To Excel From Lookout?" but what I am seeing is that the computer with excel (Computer B)hangs up displaying an hour glass continuously leaving me no option but to go into task manager to stop excel. It appears to me that the dde share is not working properly on my windows xp where lookout resides or I do not have a certain service turned on. I do have the DDE services turned on both computers. I have my computer set up as computer A with Lookout and Process1 as the process with a pot set up as pot1. On my computer (Computer A) I also have the dde share set up per the KB example.
On computer B I have the dde services turned on and I am typing the following into an excel worksheet Cell ='\\TAG23232\NDDE$'|'Process1$'!Pot1
TAG 23232 is Computer A's Name
Do you have any suggestions??? -
Error while sending data from XI to BI System
Hello Friends,
I m facing an error while sending data from XI to BI. XI is successfully recived data from FTP.
Given error i faced out in communication channel monitoring:-
Receiver channel 'POSDMLog_Receiver' for party '', service 'Busys_POSDM'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '10.1.45.35:sapgw01' not reached
TIME Fri Apr 16 08:15:18 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
Error displaying in message monitoring:-
Exception caught by adapter framework: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME Fri Apr 16 08:15:18 2010 RELEASE 70
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME.
Kindly suggest me & provide details of error.
Regards,
NarendraHi Narendra,
Message is clearly showing that your system is not reachable
102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached
Please check to ping the BI server IP 10.1.45.35 from your XI server , in case its working you can check telnet to SAP standard port like 3201/3601/3301/3901 etc.
It seems to be connectivity issue only.
Make sure your both the systems are up and running.
Revert back after checking above stuff.
Regards,
Gagan Deep Kaushal -
Error when sending data from Cube to ODS
HI,
I am extracting data from 2lis_02_itm & I stored the data in 0pur_o01(ODS) tha data is fine in ODS but when I am trying to send data from ODS to Cube 0pur_c07 it is giving the above error
InfoSource 80PUR_O01 is not defined in the source system
Errors in source system
InfoSource 80PUR_O01 is not defined in the source system.
Message no. R3005
Diagnosis
The InfoSource 80PUR_O01 specified in the data request, is not defined in the source system.
System response
The data transfer is terminated.
Procedure
In the Administrator Workbench of the Business Information Warehouse, update the metadata for this source system, and delete the InfoPackages belonging to InfoSources that no longer existing
Thanks
PriyaHi A Priya
First check if infosource 80PUR_O01 is present in datasource list of your BW system. Check this in RSA1-> Infosources-> here do Settings -> display generated objects and then do search on 80PUR_O01.
if it not present there go to ODS 0PUR_O01-> right click
-> generate export datasource.
If it is present there then replicate the datasource by right click on transfer rules and then go to SE38-> Enter program name as RS_TRANSTRU_ACTIVATE_ALL -> Enter Infosource name as 80PUR_O01 and BW System as source system-> Execute. This will activate the transfer rules.
Then try reloading from ODS to cube
Regards
Pradip -
Sending Data from R/3 to Java and Java to SAP
Dear All,
I am working on a scenario in which I have to send data from sap system to Non-SAP system (Java System).
Now one way is that I made a RFC in my SAP system and Java can call it using JCO adapter. But In this case I am not able to understand how to go another way,means how to capture data or messages from Java.
Secondly I have searched and found that IDOC can help me lot in this process ,I am new to IDOCS but through R & D , I have made the IDOC and done the following steps:-
1. Segment Creation (WE31)
2. IDOC Types (WE30)
3. Message Type (WE81)
4. Linking Message type and IDOC type (WE82)
5. Create Distribution Model (BD64)
Now I am struck on 5th step , I am not able to distribute model when I distribute it I get the following Error
Target system AII_00_800 RFC destination for synchronous communication (message type SYNCH)
Partner profile LS AII_00_800 SYNCH does not exist
Generate partner profile
or specify outbound partner profiles for message type SYNCH
Target system JAVASYS RFC destination for synchronous communication (message type SYNCH)
Partner profile LS JAVASYS SYNCH does not exist
Generate partner profile
or specify outbound partner profiles for message type SYNCH
JAVASYS is the logical system I created using SALE and ALL_00_800 is already there in LS.
I am not able to understand that my receiver system is NON SAP system so do I have to create logical system for it , and I have IDES system as sender system with only one client 800, what are all the configuration I have to do on SAP side.
I am also not able to understand where I will write my code to fetch data based on the input provided by NON SAP system as I will have to design IDOC for both Inbound and Outbound processes.
Kindly help me out, thanks in advanceHi Kanagaraja L,
Thanks for you response.
No I haven't created Created RFC Destination , this RFC destination will be of my JAVA system ???.
I have tried creating the partner logical system in WE20 and dine the following steps:
1. Partner No. IDES800 Ides 800 System - Sender System
Partn.Type LS Logical system
2. The tab Post processing : permitted agent is filled with default parameters.
3. Then in the outbound parameter table control I have pressed the add record button and got a new screen in
which I have made the following entry :-
Partner No. IDES800 Ides 800 System - Sender System
Partn.Type LS Logical system
Partner Role LS Logical system
Message Type SYNCH ALE:Dummy Message Type for De
Message code
Message function
Under tab Outbound options :
Receiver Port = A000000008 (This I have selected from F4 help)
Basic type = SYNCHRON
Saved it with the above data.
Now I am not able to understand how to do the things you have mentioned in 3rd step in your reply.
What are all the things I have to do kindly tell , as I am very new to Idocs so don't have much knowledge.
Edited by: Rachit Khanna on Dec 7, 2009 1:49 PM -
Best practice for retraction of data from BPC 10.0 to General Ledger
Hi All,
I have the requirement to retract data from BPC 10.0 to General Ledger.
What is the best practice for doing this?
I have read the "How To... Retract data from BPC 7.5 NetWeaver to SAP ERP Cost Center Accounting, Part I", but this is prepared to transfer data to Cost Center accounting. Will General Ledger be populated automatically?
What is your opinion on this?
Best regards,
JAHi Rich,
In BPC 10 NW, the data entered in Input Forms has to be retracted to ECC.
For this retraction we are following below link.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c029accf-6d95-2d10-79aa-cc291180bf73?QuickLink=index&overridelayout=true&59180354379512
In this document, I am unable to get the details of class ZCL_BPC_RTRCT_SUPERCLASS.
as it is Z class, i am unable to create in my system.
could you please help me. -
How do I convert or send data from a MacBook Pro to an s-video device???
How do I convert or send data from a MacBook Pro to an s-video device??
Use a Mini-Displayport-to-VGA adapter and a conversion box like this:
http://www.amazon.com/PC-To-TV-Video-Converter/dp/B001CJOLBW/ref=pd_cp_e_2
MBP -
Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"
I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.
Maybe you are looking for
-
Using Lion Internet Recovery on new Mac Pro...
I have a Mac Pro that I purchased in February 2012, and I'm selling it because the printing sub-system on a Mac is terrible. Won't go into details here -- suffice to say I've spent these past 3 months going round-and-round with printing issues, and
-
24" Alum: iMac Display Flicker
I've noticed that upon waking up from sleep, my 24" aluminum iMac's display flickers, especially in the right corner area of the screen. It stops after 10-20 seconds. Is this something I should be concerned with? Thank you.
-
Exporting photos from iPhoto admins account to another users iphoto account
Hi all Probably a silly question but I have just set up another family member with their own login on my mac and am wondering how to transfer/export pictures from my iPhoto folders to the other user login' iPhoto
-
I have xml docs stored in the purchaseOrder table which I transferred there using xdb repository folders via ftp. I truncate table purchaseOrder. Now I don't see any row in purchaseOrder. But I still see the repository showing the xml doc in windows
-
OracleMTS Recovery Service error
Ok I have tried everything to fix this error to no avail. Hopefully someone can help me. Using Windows 7 64 Installed Oracle 11g release 2 Can start all Oracle services EXCEPT for the MTS Recovery service I get an error that says: "Windows could not