Send e-mail from specific user

Hello!
I'd like to create two different sending from SAP System - the first is monthly and the second is everyday.
May I schedule jobs either send mail from concrete SAP Users?
Otherwise Everyday job also can send preset messages from monthly job...
SAP Release: NW 2004
Thanks and Regards,
A.M.

Hello A.M.,
You cannot schedule the job to send emails from specific users. If the send job is configured to run for INT, for example, it will send all emails with status 672 in SOST.
One thing you can do is to set waiting time in the emails. To do this, go to SOST, select the emails you want to set a wait time and click on the button "Set Wait Time" (it's a clock icon next to the delete button).
Regards,
Tiago

Similar Messages

Sending e-mail from specific senders straight to Trash

Is there a way to flag e-mails from specific senders to go straight to the trash? There are certain senders who constantly send e-mails that I invariably trash. Currently they all go to the Junk mail folder where I have to manually delete them. If I could flag all incoming e-mails form theses senders to go straight to the trash it would be a real help.

You can configure a rule to check incoming mail and route messages to a destination mailbox of your choice. Open Mail preferences, click on the Rules icon in the toolbar.

Cannot open mail from specific users

I forgot to add, in my haste and frustration of 3 days, I uninstalled Office 2010 for the 2nd time and installed Office 2013. Same user, same problem, cannot open his mail...

Good day
Hope you can assist.
I have a Outlook 2010 on Win7 64bit on a HP Probook 450.
The notebook is on a domain and the user gets his mails of exchange.
When my user receives new mail from only 2 out of 30 odd users, he cannot open them.
He gets a error message, Outlook cannot find item.
But if I go to autodiscover.xxxxxx/owa I can open the mail and reply to it.
This occurs in cached and non cached mode.
This happens in normal Outlook and in safemode Outlook.
I have also uninstalled and reinstalled MS Offcie 2010 which did not help.
Please advise, I'm going nuts...
Thank you
Gideon
This topic first appeared in the Spiceworks Community

User not able to send the mail from other mail box on outlook 2007

In my outlook(2007), i am using my mail box to send the mail and receiving the mail every thing working fine, now what happened , i am adding one of my users mail box to my outlook profile,and trying to send the mail from that mail box,when ever
i am trying to send its give me the message called message undelivered and permission error. as i am full permission on that users mail box. but still getting that issue.
My lab info
Exchange server 2010 sp3
outlook 2007

HI Paul,
In exchange, you have something called Send as permission as well. Try to give send as permission to your self from the user's mailbox.
In exchange> Reciepient config> Mailboxes> user mailbox> right click> Full Send as permssion
or,
Add-ADPermission -Identity "user1" -User "[email protected]" -ExtendedRights Send-As
After you add your self in send as permission you need to wait for some time to propagate the settings or you can forcefully reset the information store services
That should solve your issue.
UMESH DEUJA MCP,MCTS,MCSA,CCNA

How to send a mail from SAP to Users more than 200

Hi
some one can help i have one scenario in my company we have to send a mail to our user more than 200 to inform price changes once in a month or two month
Thanks in advance
Best Regards,
MH

Hi Mohammed
As you want to send to around 200 customers then maintain a condition record with the combination of Output medium 7 in the Output medium field
Second Option is Go to VA02 -> Edit -> Editor to reach the SAPscript Editor and then come back to the header output data and then The system sends the electronic mail at the time you have specified in the timing data..
Regards
Srinath

Sending OUTLOOK mail from Workflows

HI ,
Please help me in getting out of this error encountered during a sample workflow thing.
Here is the requirement I need to send a OUTLOOK mail from SAP.If the user accepts the workflow task then mail need to send a recipient ,stating that he accepthed the request.
Below I designed that task.
In send Mail step I added the recipent thing as stated below.But I was unable to send mail to OUTLOOK .In this I am not even getting notification in my SBWP in SAP INBOX.
How should i send the mail to OUTLOOK from SAP.

Hi Ranjith,
Here's some friendly advice for you:
- don't post the same question twice
- if you get a specific error message ('wait for communications service'), try investigating it yourself by googling it.
In this case, your issue is almost certainly with your mail setup - you can confirm this by trying to send a mail from SBWP to an external address. If so, it's a Basis issue, not workflow. You can safely hand it off to your Basis team.
cheers
Paul

E72- Unable to send e-mail from work mailbox

I am unable to send e-mails from my work e-mail through my E72 although it receives perfectly. I have been in contact with Nokia via e-mail for the last 2 weeks and they have sent several suggestions to solve the issue but nothing is working. I have set-up my work e-mail on my husbands Blackberry with the same settings and can receive and send perfectly. From that I conclude there is no issue with the settings I have or my work e-mail but with
Nokia!! The latest 'help' I have received was to download a patch but I have no idea how to do this and get it onto my phone. So far Nokia have not replied to me.
Any suggestions how to get this to work would be greatly appreciated

If you're using a much older firmware, updating the phone would be a good idea. Find the Software Updates section of nokia.com and type your phone model. If you can't do an over-the-air update, download and install either the OVI Suite or the standalone Software Updater. This may hard reset the phone, so back up anything important with OVI Suite first.
Ignoring firmware for now, IMAP and URL's are like apples and oranges. If you work for a small company, the server may always be called " mail.mycompany.com", but IMAP will never use an HTTP or HTTPS prefix. URL's are typically associated with Microsoft Exchange servers. Within the email program, check Options -> Settings -> Mailbox settings -> Mailbox settings -> Advanced mailbox settings. Are "Outgoing email settings" set to something like
User authentication: Same as for incoming
Outgoing mail server: <compare to the setting for the Incoming server name; in a small company this will likely be the same>
Since you're getting far enough for the mail sever to reject your connection, the other settings should be fine as-is.
It does look like an authentication issue, so I'd say you're either hitting the wrong server or there's a bad username or password in there somewhere. If the Blackberry works with an IMAP connection, then you should be using the same server name(s), and user/password.
If all else fails, you can always try removing and readding the mailbox completely. Choose Menu -> Applications -> Email -> Settings -> <highlight your work account> -> Options -> Remove mailbox. And then set it up from scratch. I hope that helps a little!

How do I set up my 3G to send/receive mail from MS exchange?

How do I set up my 3G to send/receive mail from MS exchange?

Welcome to the Apple Community.
If you can't get your mail to work on Snow Leopard after June 30, you might want to try one of these approaches
1. Configuring Mail in Snow Leopard
2. Delete your mail account from Mail preferences and set it up again using the Mail Server Information.
Some users have apparently encountered issues using this information in pre-Lion set ups (I haven't), Roger Wilmut has kindly provided instructions for those who find themselves with this problem.
Entering iCloud email settings manually in Snow Leopard or Leopard

How to send a mail to the user when a job gets canceled?

Hi experts,
                  I need to send a mail when a job gets canceled to the user.I know the FM for sending mail and i can find if a job is canceled from tbtco,but i want to know how to send the mail from the same program ,once it got canceled ?
thanks in advance,
helpful answers will be awarded with points
regards,
ashwin

Hi Ashwin
Use the below peace of code:
REPORT ZBCJOBMONITOR .
TABLES: SOMLREC90,
        TBTCO.
DATA: MAILDATA   LIKE SODOCCHGI1.
DATA: MAILTXT    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: MAILREC    LIKE SOMLREC90 OCCURS 0 WITH HEADER LINE.
DATA: I_TBTCO    LIKE TBTCO OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001 .
SELECT-OPTIONS: S_JOB FOR TBTCO-JOBNAME.
SELECT-OPTIONS: S_JOBC FOR TBTCO-JOBClass.
SELECT-OPTIONS: S_REC FOR SOMLREC90-RECEIVER.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
CLEAR:    MAILDATA, MAILTXT, MAILREC, I_TBTCO.
REFRESH: MAILTXT, MAILREC, I_TBTCO.
PERFORM GET_ABENDED_JOBS.
PERFORM BUILD_RECEIVERS.
LOOP AT I_TBTCO.
    PERFORM BUILD_TEXT_MESSAGE.
    PERFORM SEND_MAIL_NODIALOG..
ENDLOOP.
     Form BUILD_TEXT_MESSAGE
FORM GET_ABENDED_JOBS.
SELECT * FROM TBTCO
          INTO CORRESPONDING FIELDS OF TABLE I_TBTCO
                     WHERE JOBNAME IN S_JOB
                       AND STATUS = 'A'
                       AND JOBCLASS IN S_JOBC
                       AND SDLSTRTDT = SY-DATUM.
ENDFORM.
     Form BUILD_TEXT_MESSAGE
FORM BUILD_TEXT_MESSAGE.
DATA: DATE(10) TYPE C.
DATA: TIME(10) TYPE C.
MAILDATA-OBJ_NAME = 'MONITOR'.
MAILDATA-OBJ_DESCR = 'Batch Job Monitor'.
MAILDATA-OBJ_LANGU = SY-LANGU.
CONCATENATE 'Job Name:' I_TBTCO-JOBNAME
              INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
PERFORM FORMAT_DATE USING I_TBTCO-SDLSTRTDT
                            DATE.
CONCATENATE I_TBTCO-SDLSTRTTM+0(2) ':'
              I_TBTCO-SDLSTRTTM+2(2) ':'
              I_TBTCO-SDLSTRTTM+4(2)
                 INTO TIME.
CONCATENATE 'Start Date/Time:' DATE TIME
            INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
CONCATENATE 'Job Class:' I_TBTCO-JOBCLASS
            INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
MAILTXT-LINE = 'Job has terminated abnormally'.
APPEND MAILTXT.
ENDFORM.
     Form BUILD_RECEIVERS
FORM BUILD_RECEIVERS.
LOOP AT S_REC.
    CLEAR MAILREC.
    MAILREC-RECEIVER = S_REC-LOW.
    MAILREC-REC_TYPE = 'U'.
    APPEND MAILREC.
ENDLOOP.
ENDFORM.
     Form SEND_MAIL_NODIALOG
FORM SEND_MAIL_NODIALOG.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
       EXPORTING
            DOCUMENT_DATA              = MAILDATA
            DOCUMENT_TYPE              = 'RAW'
            PUT_IN_OUTBOX              = 'X'
       TABLES
            OBJECT_HEADER              = MAILTXT
            OBJECT_CONTENT             = MAILTXT
            RECEIVERS                  = MAILREC
       EXCEPTIONS
            TOO_MANY_RECEIVERS         = 1
            DOCUMENT_NOT_SENT          = 2
            DOCUMENT_TYPE_NOT_EXIST    = 3
            OPERATION_NO_AUTHORIZATION = 4
            PARAMETER_ERROR            = 5
            X_ERROR                    = 6
            ENQUEUE_ERROR              = 7
            OTHERS                     = 8.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
     Form FORMAT_DATE
FORM FORMAT_DATE USING IN
                       OUT.
CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
       EXPORTING
            DATE_INTERNAL            = IN
       IMPORTING
            DATE_EXTERNAL            = OUT
       EXCEPTIONS
            DATE_INTERNAL_IS_INVALID = 1
            OTHERS                   = 2.
ENDFORM.
Regards,
Sree

How to send a mail to the user with attachement

Hi Experts,
I have a requirement where user needs to get the automatic mail which has the updated information sheet as the attachement.
Kindly give me a clue on this.
if any body has model program for this...kidnly send it to [email protected]
Thanks in Advance,
Aiswarya

HI
good
go throug this link
http://help.sap.com/saphelp_nw04s/helpdata/en/38/71f865c2c9a94ab1dce95792187c16/content.htm
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
go through this report=>
: Report ZSAPTALK                                                   :
: Author SAPdev.co.uk                                               :
: Description :                                                      :
: Send mail message to SAP mail inbox.                               :
:                     Please visit www.sapdev.co.uk for further info :
REPORT ZSAPMAIL NO STANDARD PAGE HEADING.
TABLES: DRAD,
        QINF,
        DRAW,
        SOUC,
        SOFD,
        DRAP.
DATA: P_RETURN_CODE LIKE SY-SUBRC.
data: d_username LIKE DRAP-PRNAM.
mail declarations
DATA : BEGIN OF NEW_OBJECT_ID.         " the newly created email object
        INCLUDE STRUCTURE SOODK.
DATA : END OF NEW_OBJECT_ID.
DATA : BEGIN OF FOLDER_ID.             " the folder id of the outbox
        INCLUDE STRUCTURE SOODK.
DATA : END OF FOLDER_ID.
DATA : BEGIN OF REC_TAB OCCURS 5.     " the table which will contain the
        INCLUDE STRUCTURE SOOS1.       " information on the destination
DATA : END OF REC_TAB.
DATA : BEGIN OF OBJECT_HD_CHANGE.      " the table which contains the
        INCLUDE STRUCTURE SOOD1.       " info for the object we will be
DATA : END OF OBJECT_HD_CHANGE.        " creating
DATA : OBJECT_TYPE LIKE SOOD-OBJTP.    " the type of object
DATA : BEGIN OF OBJHEAD OCCURS 5.      " the header of the object
        INCLUDE STRUCTURE SOLI.
DATA : END OF OBJHEAD.
DATA : BEGIN OF OBJCONT OCCURS 0.      " the contents of the object
        INCLUDE STRUCTURE SOLI.        " i.e. the text etc
DATA : END OF OBJCONT.
DATA : BEGIN OF OBJPARA OCCURS 5.      " formatting options
        INCLUDE STRUCTURE SELC.
DATA : END OF OBJPARA.
DATA : BEGIN OF OBJPARB OCCURS 5.      " formatting options
        INCLUDE STRUCTURE SOOP1.
DATA : END OF OBJPARB.
DATA : BEGIN OF T_MAIL_TEXT OCCURS 0, "Message table for messages to
        STRING(255),                   "user via mailbox
       END OF T_MAIL_TEXT.
Parameter: p_uname like sy-uname.
**START-OF-SELECTION
START-OF-SELECTION.
    d_username = p_uname.
    PERFORM POPULATE_EMAIL_TEXT.
    PERFORM SETUP_TRX_AND_RTX_MAILBOXES USING P_RETURN_CODE.
    PERFORM CREATE_AND_SEND_MAIL_OBJECT.
      FORM POPULATE_EMAIL_TEXT                                      *
      Inserts text for email message                                *
FORM POPULATE_EMAIL_TEXT.
CLEAR T_MAIL_TEXT-STRING.            "puts a blank line in
APPEND T_MAIL_TEXT.
APPEND T_MAIL_TEXT.
adds failed list on to end of success list.
T_MAIL_TEXT-STRING = 'Test email message line 1'.
APPEND T_MAIL_TEXT.
T_MAIL_TEXT-STRING = 'Test email message line 1'.
APPEND T_MAIL_TEXT.
CLEAR T_MAIL_TEXT-STRING.            "puts a blank line in
APPEND T_MAIL_TEXT.
T_MAIL_TEXT-STRING = 'Header1    Header2    Header3'.
APPEND T_MAIL_TEXT.
T_MAIL_TEXT-STRING = '----
APPEND T_MAIL_TEXT.
ENDFORM.
*&      Form SETUP_TRX_&_RTX_MAILBOXES
Ensure that the mailboxes of the sender (INTMGR) are set up OK
FORM SETUP_TRX_AND_RTX_MAILBOXES USING P_RETURN_CODE.
get the user no of the sender in order to add the mail to the
user name's outbox for future reference
SELECT SINGLE * FROM SOUC
           WHERE SAPNAM = SY-UNAME.    "SAP name of a SAPoffice user
IF SY-SUBRC NE 0.
    "Error finding the SAPoffice user info for the user
    MESSAGE E064(ZR53) WITH SY-UNAME.
    P_RETURN_CODE = 1.
    EXIT.
ENDIF.
*Get the outbox No for the sender from the user No where the folder
                                       " type is an outbox
SELECT * FROM SOFD WHERE OWNTP = SOUC-USRTP   "Owner type from ID
                       AND OWNYR = SOUC-USRYR   "Owner year from the ID
                       AND OWNNO = SOUC-USRNO   "Owner number from the I
                       AND FOLRG = 'O'."Output box
ENDSELECT.
IF SY-SUBRC NE 0.
    " Error getting folder information for the user
    MESSAGE E065(ZR53) WITH SY-UNAME.
    P_RETURN_CODE = 1.
    EXIT.
ENDIF.
ENDFORM.                               " SETUP_TRX_&_RTX_MAILBOXES
*&      Form CREATE_AND_SEND_MAIL_OBJECT
FORM CREATE_AND_SEND_MAIL_OBJECT.
FOLDER_ID-OBJTP = SOFD-FOLTP.        " the folder type ( usually FOL )
FOLDER_ID-OBJYR = SOFD-FOLYR.        " the folder year ( usually 22 )
FOLDER_ID-OBJNO = SOFD-FOLNO.        " the folder no.
OBJECT_TYPE     = 'RAW'.             " the type of object being added
build up the object information for creating the object
OBJECT_HD_CHANGE-OBJLA = SY-LANGU. " the language of the email
OBJECT_HD_CHANGE-OBJNAM = 'PS to DM Interface'. " the object name
mail subject 'Mass Linking of QA, pass/fail'
MOVE TEXT-002 TO OBJECT_HD_CHANGE-OBJDES.
OBJECT_HD_CHANGE-DLDAT = SY-DATUM.   " the date of the email
OBJECT_HD_CHANGE-DLTIM = SY-UZEIT.   " the time of the email
OBJECT_HD_CHANGE-OBJPRI = '1'.       " the priority ( highest )
OBJECT_HD_CHANGE-OBJSNS = 'F'.       " the object sensitivity
F is functional, C - company sensitive
object_hd_change-skips = ' '.       " Skip first screen
object_hd_change-acnam = 'SM35'.    " Batch imput transaction
object_hd_change-vmtyp = 'T'.       " Transaction type
add the text lines into the contents of the email
CLEAR OBJCONT.
REFRESH OBJCONT.
free objcont.      " added this to delete the mail contents records
LOOP AT T_MAIL_TEXT.
    OBJCONT-LINE = T_MAIL_TEXT-STRING.
    APPEND OBJCONT.
ENDLOOP.
CLEAR OBJCONT.
build up the table of receivers for the email
REC_TAB-RCDAT = SY-DATUM.            " the date to send the email
REC_TAB-RCTIM = SY-UZEIT.            " the time to send the email
the SAP username of the person who will receive the email
REC_TAB-RECNAM = D_USERNAME.
the user type of the person who will send the email ( USR )
REC_TAB-SNDTP = SOUC-USRTP.
the user year of the person who will send the email ( 22 )
REC_TAB-SNDYR = SOUC-USRYR.
the user number of the person who will send the email
REC_TAB-SNDNO = SOUC-USRNO.
the sap username of the person who will send the email
REC_TAB-SNDNAM = SY-UNAME.
get the user info for the receiver of the document
SELECT SINGLE * FROM SOUC WHERE SAPNAM = D_USERNAME.
IF SY-SUBRC NE 0.
    WRITE : / TEXT-001, D_USERNAME.    "usnam.
    EXIT.
ENDIF.
the user number of the person who will receive the email ( USR )
REC_TAB-RECNO = SOUC-USRNO.
the user type of the person who will receive the email ( USR )
REC_TAB-RECTP = SOUC-USRTP.
the user year of the person who will receive the email ( USR )
REC_TAB-RECYR = SOUC-USRYR.
the priority of the email ( highest )
REC_TAB-SNDPRI = '1'.
check for delivery on the email
REC_TAB-DELIVER = 'X'.
send express so recipient knows there is a problem
REC_TAB-SNDEX = 'X'.
check for a return receipt
REC_TAB-READ = 'X'.
the sap username of the person receiving the email
REC_TAB-ADR_NAME = D_USERNAME.       "usnam.
add this receiver to the internal table
APPEND REC_TAB.
CLEAR REC_TAB.
call the function to create the object in the outbox of the sender
CALL FUNCTION 'SO_OBJECT_INSERT'
       EXPORTING
            FOLDER_ID                  = FOLDER_ID
            OBJECT_HD_CHANGE           = OBJECT_HD_CHANGE
            OBJECT_TYPE                = OBJECT_TYPE
            OWNER                      = SY-UNAME
       IMPORTING
            OBJECT_ID                  = NEW_OBJECT_ID
       TABLES
            OBJCONT                    = OBJCONT
            OBJHEAD                    = OBJHEAD
            OBJPARA                    = OBJPARA
            OBJPARB                    = OBJPARB
       EXCEPTIONS
            ACTIVE_USER_NOT_EXIST      = 1
            COMMUNICATION_FAILURE      = 2
            COMPONENT_NOT_AVAILABLE    = 3
            DL_NAME_EXIST              = 4
            FOLDER_NOT_EXIST           = 5
            FOLDER_NO_AUTHORIZATION    = 6
            OBJECT_TYPE_NOT_EXIST      = 7
            OPERATION_NO_AUTHORIZATION = 8
            OWNER_NOT_EXIST            = 9
            PARAMETER_ERROR            = 10
            SUBSTITUTE_NOT_ACTIVE      = 11
            SUBSTITUTE_NOT_DEFINED     = 12
            SYSTEM_FAILURE             = 13
            X_ERROR                    = 14
            OTHERS                     = 15.
IF SY-SUBRC NE 0.
    MESSAGE A063(ZR53) WITH SY-SUBRC.
    EXIT.
ENDIF.
call the function to send the already created email to the receivers
CALL FUNCTION 'SO_OBJECT_SEND'
       EXPORTING
            FOLDER_ID                  = FOLDER_ID
            OBJECT_ID                  = NEW_OBJECT_ID
            OUTBOX_FLAG                = 'X'
            OWNER                      = SY-UNAME
       TABLES
            RECEIVERS                  = REC_TAB
       EXCEPTIONS
            ACTIVE_USER_NOT_EXIST      = 1
            COMMUNICATION_FAILURE      = 2
            COMPONENT_NOT_AVAILABLE    = 3
            FOLDER_NOT_EXIST           = 4
            FOLDER_NO_AUTHORIZATION    = 5
            FORWARDER_NOT_EXIST        = 6
            NOTE_NOT_EXIST             = 7
            OBJECT_NOT_EXIST           = 8
            OBJECT_NOT_SENT            = 9
            OBJECT_NO_AUTHORIZATION    = 10
            OBJECT_TYPE_NOT_EXIST      = 11
            OPERATION_NO_AUTHORIZATION = 12
            OWNER_NOT_EXIST            = 13
            PARAMETER_ERROR            = 14
            SUBSTITUTE_NOT_ACTIVE      = 15
            SUBSTITUTE_NOT_DEFINED     = 16
            SYSTEM_FAILURE             = 17
            TOO_MUCH_RECEIVERS         = 18
            USER_NOT_EXIST             = 19
            X_ERROR                    = 20
            OTHERS                     = 21.
IF SY-SUBRC EQ 0.
    MESSAGE I035(ZR53) WITH NEW_OBJECT_ID D_USERNAME. "usnam.
ELSE.
    MESSAGE I036(ZR53) WITH D_USERNAME."      sy-subrc.
ENDIF.
ENDFORM.                               " CREATE_AND_SEND_MAIL_OBJECT
thanks
mrutyun

How i can send a mail to the user SAP Office mailbox through the spool.

hi all,
I have created an report and scheduled for background and it generated a spool now how i can send a mail to the user SAP Office mailbox through that spool.
                      please provide me the sample code if possible.
               thanks.

Read the spool number with this...
    SELECT RQIDENT
    INTO (T_TSP01-RQIDENT)
    FROM TSP01
    WHERE RQOWNER EQ SY-UNAME
      AND RQCLIENT EQ SY-MANDT.
    APPEND T_TSP01.
    ENDSELECT.
Use this FM RSPO_IRETURN_RAW_DATA to read the content of the spool into an Internal Table...
Finally use this FM SO_OBJECT_SEND to send the mail to an SAP Office user...
Greetings,
Blag.

I am set up mac mini and when I test the mail server by sending a mail from administrator to administrator I get the error message 'Diagnostic-Code: X-Postfix; connect to 127.0.0.1[127.0.0.1]:10024: Connection refused'. Can any one suggest a solution

I set up mac mini and when I test the mail server by sending a mail from administrator to administrator I get the error message 'Diagnostic-Code: X-Postfix; connect to 127.0.0.1[127.0.0.1]:10024: Connection refused'. Can any one suggest a solution

Thanks. Where could I possibly look for a firewall rule. I knowingly did not creat any. My system has internet coming to a Modem which then is connected to a wireless router. I have computers connecting to the router through cable as well as wireless. One of these computers has been our mailserver using Mercury and Pegasus and that computer has a static IP address. The Mac Mini also has been assigned a different srtatic IP address. I have only set up user account, none of them an email account as I initially expect them to receive only internal mails. Is it necessary that I must set up an email id for each user while setting up the user account. My server id is server.local. So would the email id for local users be [email protected]?

HT4623 i cannot send e-mails from optonline from my iphone 4s

I cannot send e-mails from my iphone 4s any ideas as I have verified the set up with optonline and everything seems correct

can you be a little more specific - what happens when you send the mail? error msg?

When I send e-mails from my iPad the wrong last name appears, even though I have updated my Apple details. How can I correct this ?

When I send e mails from my iPad my previous last name still appears, even though I have changed it on my Apple a/c.
How can I correct this, please ?

Try this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
 Cheers, Tom

Sending E-Mail from PL/SQL

I have used Oracle 9i (9.2.0.1) on windows Xp machine. I want to send e-mail
from PL/SQL procedure.
I execuete the procedure as follows friom SQL prompt in SCOTT user..
execute prc_send_mail('[email protected]','[email protected]','Test message');
before that I create the procedure in scott user and it is created successfully in scott user..
Procedue is as follows...
CREATE OR REPLACE PROCEDURE prc_send_mail (p_sender IN VARCHAR2,
p_recipient IN VARCHAR2,
p_message IN VARCHAR2)
as
l_mailhost VARCHAR2(255) := 'mail.yahoo.com';
l_mail_conn utl_smtp.connection;
BEGIN
l_mail_conn := utl_smtp.open_connection(l_mailhost, 25);
utl_smtp.helo(l_mail_conn, l_mailhost);
utl_smtp.mail(l_mail_conn, p_sender);
utl_smtp.rcpt(l_mail_conn, p_recipient);
utl_smtp.open_data(l_mail_conn );
utl_smtp.write_data(l_mail_conn, p_message);
utl_smtp.close_data(l_mail_conn );
utl_smtp.quit(l_mail_conn);
end;
unfortunately i have receiveed some error which I mentioned below...
ERROR at line 1:
ORA-29278: SMTP transient error: 421 Service not available
ORA-06512: at "SYS.UTL_SMTP", line 17
ORA-06512: at "SYS.UTL_SMTP", line 96
ORA-06512: at "SYS.UTL_SMTP", line 138
ORA-06512: at "SCOTT.PRC_SEND_MAIL", line 9
ORA-06512: at line 1.
Please anyone giove me the solution..

> ORA-29278: SMTP transient error: 421 Service not available
Not an Oracle error. This is the SMTP server telling you to go and get stuffed. It does not want to talk to you.
See http://www.faqs.org/rfcs/rfc821.html.
The RFC says that this type of response code can be for example when the SMTP server is about to shutdown - thus informing the client that it cannot be serviced.
But seeing that you're trying to hijack mail.yahoo.com as your SMTP server.. I'm not surprise that the server is giving you the bird.

Send e-mail from specific user

Similar Messages

Maybe you are looking for