Send email for a given domain over VPN
Hi all,
I have an IPSec site-to-site VPN working between 2 end-points.
Is it possible to send emails destined to the domain @mycompany.com over the VPN?
Normally, the mail server will try to resolve the domain name and end up with a public IP for the destination SMTP server.
Any idea how this can be implemented on the server and on the router?
Thanks for any help.
Let's say the local mail server finds that the remote mail server addresses for domain @mycompany.com are mail1.mycompany.com and mail2.mycompany.com.
Should I modify the hosts file on the local mail server so that mail1.mycompany.com points to, for e.g., 192.168.200.1 and mail2.mycompany.com points to 192.168.200.2?
Interesting traffic is "permit ip 10.0.0.0 0.0.255.255 192.168.200.0 0.0.0.255". The private ip of the local mail server is 10.0.0.13/16.
Below is an excerpt of the current config on my local Cisco 2801 router:
crypto map mapVPN 10 ipsec-isakmp
set peer
set security-association lifetime seconds 43200
set transform-set TS_esp-3des-sha
set pfs group2
match address aclInterestingTraffic
interface Serial0/1/0
ip address 255.255.255.252
ip access-group aclIncoming in
ip nat outside
crypto map mapVPN
ip nat inside source route-map nonat interface Serial0/1/0 overload
ip nat inside source static tcp 10.0.0.13 25 25 extendable
ip access-list extended aclInterestingTraffic
permit ip 10.0.0.0 0.0.255.255 192.168.200.0 0.0.0.255
permit ip 10.6.0.0 0.0.255.255 192.168.200.0 0.0.0.255
ip access-list extended aclIncoming
permit tcp any host eq smtp
ip access-list extended aclNAT
deny ip 10.0.0.0 0.0.255.255 192.168.200.0 0.0.0.255
deny ip 10.6.0.0 0.0.255.255 192.168.200.0 0.0.0.255
permit ip 10.0.0.0 0.0.255.255 any
permit ip 10.6.0.0 0.0.255.255 any
route-map nonat permit 10
match ip address aclNAT
Similar Messages
-
Restrict Broadcaster to not send Emails for certain Queries
Hi,
is there any possibility to restrict a user on sending Emails for certain queries?
With the existing authorizaion objects S_RS_BCS and S_RS_ADMWB it is not possible to do so.
He will need S_RS_COMP to be able to open the Query.
With S_OC_SEND I just be able to take his ability to send Emails, but the user will need this option.
Does anybody has an idea?
Thanks and best regards
SaschaThe Workspace User role ony controls whether the user is allowed to use Workspace or not. A user will only be able to Start a Process in Workspace if they a) are a Workspace User and b) the process security settings allow them to by having the INVOKE_PERM enabled. The INVOKE_PERM setting is usually controlled from within Application Management area in the Adminui and would be set per process to define who is allowed to invoke (start) that service (process). Take a look at your processes and see if they are defined for the All Principals group having the INVOKE_PERM as this is one way in which everybody can start a process.
I'm unfamiliar with the Services User role but if it sounds like maybe this has the INVOKE_PERM so this could be why all your users can start processes, presuming they are all in this role.
But however the INVOKE_PERM priviledge is being granted, it is not via the Workspace User role.
Hope that helps.
Jon -
I have not been able to send email for some time but now i have stopped being able to recieve email.
i have not been able to send emails for some time but in the last two days ive stopped being able to receive, the message says 'username or password incorrect' ive checked all the settings, ive deleated accout and set up again, ive rebooted phone. i tried to sync with pc but this also fails any ideas
That is correct, They don't seem to know about Mac, never got a single scrap of help from them. Try recreating your account from scratch, delete the account, (write down all your settings first) and add an account, see if that works, and if it does, delete the first account to prevent things doubling up on you. I think that's what I did, it was quite a while ago. Hope this helps, or gets you pointed in the right direction. Maybe go to At&t and try creating another account, and if ti works, delete the first.
One other tihing I did was to reset Safari, as AT&T uses the net, that's about all I can remember, like I said it was awhile ago. -
How can i send email for suport to rest my questions' please helpe'
how can i send email for suport to rest my questions' please helpe'
You need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(109789) -
I’m trying to send email using exchange send connector STARTTLS setting to the SMTP server. I have read multiple documents on configuring TLS for send connector, but they talks about outbound connections to internet facing servers. My Exchange 2013 and SMTP
server is in the same domain (let’s say A.com) and I’m creating dummy domains on my SMTP server (e.g.
[email protected],
[email protected] ) and their respective send connectors on the exchange server end. In the smart host section added the IP address of the SMTP server and in the scoping section added the SMTP domain address (e.g. dummy1.local ). In the FQDN field, added
the FQDN of the exchange server 2013 which certificate is enabled with SMTP service.
Could you tell me a step by step procedure, where I’m going wrong or any extra settings needs to added?
Presently, it is giving me an error that 530 5.5.1 TLS encrypted connection is required.
Note: I’ve created the Microsoft CA certificates for the SMTP and exchange servers and imported them in the personal certificate container. In which, the exchange certificate is created with FQDN name of the server and enabled for the SMTP service.
I’m using OPENSSL certificate for making the SMTP server TLS enabled. (let me know, if I need to import the OPENSSL certificate anywhere on the exchange end)?
Thanks!-IgnoreSTARTTLS is set to false on the send connector properties.
I'm trying to established a HTTP over TLS connection. I'm not using mutual TLS between these two server.
The send connector protocol logging is attached as below,
2014-09-22T20:09:45.468Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,2,10.219.3.74:24939,10.219.3.73:25,<,220 SMTP.A.local Welcome (MTA version),
2014-09-22T20:09:45.546Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,3,10.219.3.74:24939,10.219.3.73:25,>,EHLO Exchange.A.local,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,4,10.219.3.74:24939,10.219.3.73:25,<,250-SMTP.A.local Exchange.A.local OK,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,5,10.219.3.74:24939,10.219.3.73:25,<,250-SIZE,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,6,10.219.3.74:24939,10.219.3.73:25,<,250-8BITMIME,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,7,10.219.3.74:24939,10.219.3.73:25,<,250-BINARYMIME,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,8,10.219.3.74:24939,10.219.3.73:25,<,250-PIPELINING,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,9,10.219.3.74:24939,10.219.3.73:25,<,250-HELP,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,10,10.219.3.74:24939,10.219.3.73:25,<,250-DSN,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,11,10.219.3.74:24939,10.219.3.73:25,<,250-CHUNKING,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,12,10.219.3.74:24939,10.219.3.73:25,<,250-AUTH SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,13,10.219.3.74:24939,10.219.3.73:25,<,250-AUTH=SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,14,10.219.3.74:24939,10.219.3.73:25,<,250-STARTTLS,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,15,10.219.3.74:24939,10.219.3.73:25,<,250-DELIVERBY,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,16,10.219.3.74:24939,10.219.3.73:25,<,250-MT-PRIORITY,
2014-09-22T20:09:45.640Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,17,10.219.3.74:24939,10.219.3.73:25,<,250 ENHANCEDSTATUSCODES,
2014-09-22T20:09:45.655Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,18,10.219.3.74:24939,10.219.3.73:25,>,STARTTLS,
2014-09-22T20:09:45.671Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,19,10.219.3.74:24939,10.219.3.73:25,<,220 2.7.0 Ready to start TLS,
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,20,10.219.3.74:24939,10.219.3.73:25,*,,Sending certificate
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,21,10.219.3.74:24939,10.219.3.73:25,*,CN=Exchange.A.local,Certificate subject
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,22,10.219.3.74:24939,10.219.3.73:25,*,"CN=DC-CA, DC=A, DC=local",Certificate issuer name
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,23,10.219.3.74:24939,10.219.3.73:25,*,63E7E70100000000000B,Certificate serial number
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,24,10.219.3.74:24939,10.219.3.73:25,*,CAEB1200CDF49715E5F2E4B8315EFDDC01F8F945,Certificate thumbprint
2014-09-22T20:09:45.780Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,25,10.219.3.74:24939,10.219.3.73:25,*,Exchange.A.local,Certificate alternate names
2014-09-22T20:09:46.654Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,26,10.219.3.74:24939,10.219.3.73:25,-,,Local
2014-09-22T20:09:46.669Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,0,,10.219.3.73:25,*,,attempting to connect
2014-09-22T20:09:46.685Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,1,10.219.3.74:24940,10.219.3.73:25,+,,
2014-09-22T20:09:46.701Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,2,10.219.3.74:24940,10.219.3.73:25,<,220 SMTP.A.local Welcome (MTA version),
2014-09-22T20:09:46.701Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,3,10.219.3.74:24940,10.219.3.73:25,>,EHLO Exchange.A.local,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,4,10.219.3.74:24940,10.219.3.73:25,<,250-SMTP.A.local Exchange.A.local OK,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,5,10.219.3.74:24940,10.219.3.73:25,<,250-SIZE,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,6,10.219.3.74:24940,10.219.3.73:25,<,250-8BITMIME,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,7,10.219.3.74:24940,10.219.3.73:25,<,250-BINARYMIME,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,8,10.219.3.74:24940,10.219.3.73:25,<,250-PIPELINING,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,9,10.219.3.74:24940,10.219.3.73:25,<,250-HELP,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,10,10.219.3.74:24940,10.219.3.73:25,<,250-DSN,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,11,10.219.3.74:24940,10.219.3.73:25,<,250-CHUNKING,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,12,10.219.3.74:24940,10.219.3.73:25,<,250-AUTH SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,13,10.219.3.74:24940,10.219.3.73:25,<,250-AUTH=SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,14,10.219.3.74:24940,10.219.3.73:25,<,250-STARTTLS,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,15,10.219.3.74:24940,10.219.3.73:25,<,250-DELIVERBY,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,16,10.219.3.74:24940,10.219.3.73:25,<,250-MT-PRIORITY,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,17,10.219.3.74:24940,10.219.3.73:25,<,250 ENHANCEDSTATUSCODES,
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,18,10.219.3.74:24940,10.219.3.73:25,*,,sending message with RecordId 52652004081667 and InternetMessageId <[email protected]>
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,19,10.219.3.74:24940,10.219.3.73:25,>,MAIL FROM:<> SIZE=7653 BODY=BINARYMIME,
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,20,10.219.3.74:24940,10.219.3.73:25,>,RCPT TO:<[email protected]>,
2014-09-22T20:09:46.825Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,21,10.219.3.74:24940,10.219.3.73:25,<,530 5.5.1 A TLS-encrypted connection is required,
2014-09-22T20:09:46.950Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,22,10.219.3.74:24940,10.219.3.73:25,<,503 5.5.1 unexpected RCPT command,
2014-09-22T20:09:46.981Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,23,10.219.3.74:24940,10.219.3.73:25,>,RSET, -
Email Activity not sending emails for one domain - 10.1.3.4 MLR#10
I have four domains in my BPELConsole. My evey BPEL process has CatchAll block and I'm sending email notification with fault details.
Somehow, my BPEL processes from three domains are sending emails properly but myDomain4 is not sending emails even after successful execution of Email Activity.
1) I have compared the Email code with processes in other domain and they are similar.
2) orabpel.bpelnotification is not logging any error for this notification.
3) I never received any email from this domain. There was no error in logs during domain creation.
3) I am getting following in logs that sending email was successfully executed. It received Notification ID too
<2010-09-22 07:24:44,530> <DEBUG> <myDomain4.collaxa.cube.services> <oracle.bpel.services.notification.queue.QueueConnectionPool::QueueConnectionPool> Fetched a queue connection from pool java:comp/env/jms/Queue/NotificationSenderQueueConnectionFactory, available connections=4
<2010-09-22 07:24:44,534> <DEBUG> <myDomain4.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> Start of send(type,caller,message) type = email caller = BPEL
<2010-09-22 07:24:44,534> <DEBUG> <myDomain4.collaxa.cube.services> <oracle.bpel.services.notification.queue.sender.Publisher::init> Notification ID 12834c63e81c20d0:-71064af1:42b35e5dab4:-7283
Please help/hint for any possible solution/debugging.sometimes i have seen emails not being sent when the async invokes takes more time than the overall completion.. And yes, we might still see successful log as emails sent. FYI - I am with 10.1.3.3.1 MLR #8.
did you try just creating a email only process? switch off all other processes in that domain and initiate only this email process to see what happens.. -
Can I send email using my own domain address with iCloud the way I can with gmail?
Let's say I own mydomain.com and have a [email protected] email account. I have set that up to forward to gmail, and that would be easy to switch to iCloud. Here's the tricky part: gmail allows me to send email as [email protected] I've been doing this for years and it works, but I'd like to switch from gmail to iCloud. Can I set up this same behavior with an iCloud @me.com address (which I already have but haven't been using yet)? I know I can obviously switch the forwarding of incoming mail to my @me.com address... but can I send [email protected] email through iCloud the way I can with gmail? All of my devices are Apple: a Mac Mini using Apple's Mail app, and an iPhone and an iPad both using the Apple email app, so I'd rather switch everything over from gmail to iCloud.
P.S. Awe, c'mon Apple. Don't turn those fake addresses into links. I just used them for the sake of giving an example.Ah, I should have made that clear. My domain didn't come from google. It was purchased at and is hosted at dreamhost, but I haven't used their email servers in years - I just route everything through gmail. I actually have a bunch of domains (with websites).
Gmail has an option that lets someone with custom domains send (and receive) email through gmail using the custom domain once Google confirms proper ownership of the domain (to prevent spammers and such). Gmail has a setting for "send email as" which allows gmail to be sent using a custom domain as the sender. I'm pretty sure Apple's old mobileme had this feature too, but I didn't use it. -
Can't send email to my own domain
The mail program on my iphone works fine, except for one thing - i can't send email to anyone using the domain name as me (our business has its own email domain).
Since most of my emails are to other people inside our business, this is very frustrating).
I am guessing I have done something silly in the set up, but am too much of a novice to figure it out.
Any suggestions?Sorry - typo in the above question. Should read:
"I can't send email to anyone using the SAME domain name as me"
Tks. -
BODS 3.1 :SMTP configuration to send email for success or failure of job
Hi.
This is further to this post : http://forums.sdn.sap.com/thread.jspa?threadID=1965129&tstart=0
Thanks to all for the help.
I did not find a complete set of information as things to do (for a person who is new to BODS).
Hence sharing the workflow which works for me when tested on a simple workflow :
Pre-requisite : SMTP service to be made available on the BODS server and port 25 to be opened up.
This is done by the IT dept of the company.
When smtp service is activated and port 25 is opened up, telnet IP address 25 should say, service is available.
Suggestion : create a email group like : bods at company.com which can be used to be used for the BODS JOBs. Which does not prompt for a password. This also is done by the IT dept of the company.
1) On the BODS server :
1) Click open Data Services Server Manager
2) SMTP settings for smtp_to functions :
Add the IP Address of the SMTP server
Add the email address of the sender. Eg. bodsjobs at companyname,com
3)Apply/Restart the server.
2) Login to BODS Designer :
Create a test job :
TRY ==>DF===> Script for success ===> CATCH script for failure
In the script for success : add the following :
print (' IN TRY BLOCK Before email ' );
smtp_to('bodsjobs at abc,com', ' SUCCESS OF JOB : '
|| job_name(),'Job completed successfully ', 0, 0);
print('After Email ');
In the script for Catch add the following :
print (' IN CATCH BLOCK Before email ' );
smtp_to('bodsjobs at abc,com', 'FAILURE OF JOB : '
|| job_name(),
error_number( ) || 'Error message: ' || error_message( ) ||
'check details', 50, 50);
print('After Email ');
Note : In the catch : select all exceptions on the check box.
Save all.
Click on the job and say execute.
The job will run and if it is successful. You will receive the succes mail.
If there is any error in the DF before the catch, you will receive a mail, which says failure.
The above workflow, when tested atleast works for me.
Hope this helps.
Regards
induHi Arun.
Am really not aware as to how to make things work from the console.
I work on windows environment both at client and on the server.
It looks like you got a bit confused on suggestion of a email group account.
I never did anything on outlook configuration for activation of smtp for bods.
I think you should not mess with outlook.
I dont know from the client side how things work.
But i have worked directly on the BODS server where the bods installation was done.
It is relatively very simple to do and to test.
But to even test why you get that error.
All you need is just a email id. Which could be yours ???
Put your email id as the source of email in that box in the job server.
And put only your email id in smtp_to and test it.
Run a test job. If it completes successfully. You will receive a mail.
In the catch, if you have checked all the boxes for error capture,
if the job fails, it would throw a dump of the errors in the email.
Once everything works well and you receive emails for any jobs you are running.
Then you could decide for the source of your email id and for the receipients of your emails of the jobs.
You could put a group id of your team as source. And also in smtp_to script in case you want everyone to receive the alert that the job has been done or it has errors.
Or include only those email ids in the smtp_to whom you feel, should receive the mail.
Hope this idea helps.
Please dont mess with outlook for any smtp activation for bods.
It is not required if you are working on a windows environment.
You just need a email id for testing.
Outlook configuration does not come into picture at all.
if there is any other unix environment involved. I have no idea.
And i really do not know how things would be from a client side to configure.
Server configurations i do from the server.
I did all configurations on the main server machine. Not from the client.
And I have only one job server so i did everything there.
I did not do anything from management console.
I use management console only for monitoring of jobs on a daily basis, the dashboard which gives you details of the data pulled, time taken etc etc.
cheers
indu.
Edited by: Indumathy Narayanan on Oct 22, 2011 8:05 AM
Edited by: Indumathy Narayanan on Oct 22, 2011 8:09 AM
Edited by: Indumathy Narayanan on Oct 22, 2011 8:17 AM
Edited by: Indumathy Narayanan on Oct 22, 2011 8:18 AM -
Campaign execution not send emails for contact persons
Hi All!
I'm facing a problem with Campaigns (communication medium - E-mail): Those are the steps i'm following:
1.Start the campaign, and on the "campaign: Schedule job" screen, i choose "immediately". If i look at the campaign details after scheduled the job, the status is now "job started".
2. To check wich mails were sent, I also had a look at the business partner account that belongs to the target group used. On the "Interaction History" block, there is a line: "Outgoing Email" - on the details of this outgoing email I can see the "To" (Receivers). And here, I have emails from the business Partner contact persons and from the business partner itself (the email that is on the header level of the business partner account, on the "main address and communication data" area). So far so good. That's exactly what i need but,
3. If i go to the tcode, i only have a send request for the business partner itself and none for his contact persons (although those emails are on the "To" line for the interaction history).
I'm working on the Webclient UI, of the CRM 7.0
Does someone knows why the emails are not being sent also for the contact persons?
Thanks in advance.
InêI have achieved this by implementing the BADI : CRM_MKT_ADR_SEARCH
In this BADI's method : CHANGE_SEARCH_RESULTS you can modify the data which is being sent back to system for campaign execution.
NOTE: I am using Address Independent Communication Data of Business Partner
Below is my sample code for contact person email :
data: wa_bp_cp_channel type crmt_bp_cp_channel.
field-symbols: <fs_bp_cp_channel> type crmt_bp_cp_channel.
types: begin of ty_cp,
partner type but000-partner,
address type but000-addrcomm,
end of ty_cp,
begin of ty_bpcp,
partner1 type but051-partner1,
partner2 type but051-partner2,
end of ty_bpcp.
data: it_cp type table of ty_cp,
wa_cp type ty_cp.
data: it_bpcp type table of ty_bpcp,
wa_bpcp type ty_bpcp.
data: it_bp type table of ty_cp,
wa_bp type ty_cp.
read table ct_bp_cp_channel into wa_bp_cp_channel with key com_channel = '03'.
if sy-subrc = 0.
select partner addrcomm
from but000
into table it_cp
for all entries in ct_bp_cp_channel
where
partner = ct_bp_cp_channel-cp_number.
select partner1 partner2
from but051
into table it_bpcp
for all entries in ct_bp_cp_channel
where
partner1 = ct_bp_cp_channel-bp_number.
if it_bpcp[] is not initial.
select partner addrcomm
from but000
into table it_bp
for all entries in it_bpcp
where
partner = it_bpcp-partner2.
endif.
sort it_cp by partner.
sort it_bp by partner.
sort it_bpcp by partner1.
loop at ct_bp_cp_channel assigning <fs_bp_cp_channel> where com_channel = '03'.
read table it_cp into wa_cp with key partner = <fs_bp_cp_channel>-cp_number binary search.
if sy-subrc = 0.
<fs_bp_cp_channel>-addrnumber = wa_cp-address.
clear <fs_bp_cp_channel>-bp_number.
clear <fs_bp_cp_channel>-bp_guid.
else.
read table it_bpcp into wa_bpcp with key partner1 = <fs_bp_cp_channel>-bp_number binary search.
if sy-subrc = 0.
read table it_bp into wa_bp with key partner = wa_bpcp-partner2 binary search.
if sy-subrc = 0.
<fs_bp_cp_channel>-addrnumber = wa_bp-address.
clear <fs_bp_cp_channel>-bp_number.
clear <fs_bp_cp_channel>-bp_guid.
endif.
endif.
endif.
endloop.
endif. -
How can i send email from a custom domain connected to gmail on iphone?
Hi there,
I am trying to add a gmail account to my iphone 5S which i have added a custom godaddy email to through pop3 but when i add the gmail account i cant send from the custom domain email.
lets say the account is [email protected] with a [email protected] email attached to it, is there a way of sending emails from my iphone from this address?
I have tried to find other guides but cannot seem to.
thanks in advanceLook in the JavaMail forum on how to create Mime format emails. This allows you to use HTML instead of plain text.
Anthony -
I have been using the iPad for email for a year. WIFI connection cannot be established for some reason, I am stuck on 3G. I am sitting next to the WIFI router.
Why can't I send email using my only email address hplar45ATcomcastDOTnet?
Why can't I get a WIFI connection?
What changed?
Dan
<Email Edited by Host>I can't answer why you are not able to connect to WiFi but I can tell you to try the basic things, turn WiFi off and on again, restart your iPad, reset network settings, reboot your router, forget your WiFi network and try again .....
The issue with the email is probably a password issue. Make sure that your password is entered in the incoming mail server setting and in the outgoing mail server setting as well. The outgoing server setting can be accessed by tapping on the SMTP under the Outgoing Mail Server Setting and then tapping the smtp.comcast.net in the next window under the Primary Server Setting.
The outgoing mail server setting will be in the first window when you tap on the Comcast account in the Mail settings.
Look here for a few different web sites for help with the WiFi.
http://www.google.com/search?q=troubleshoot%20wifi%20on%20iPad -
How to Send Emails for failed messages without using Alert
Hi Experts,
In our project, we need to trigger Emails for the failed messages in SXMB_MONI / Adapter Engine without using Alert Framewrok.
Please let me know the below :
1. Is this really possible to avoid Alert?
2. If possible, then can we accomplish this by creating any PI Scenario? Please provide me some knowledge.
3. Can we do it by writing any ABAP Code? If ABAP report can make it, then please provide me the code/ tables which will be needed. If any Blog/ Wiki is there, then please let me know the URLs.
Thanks,
Nabendu.Hi Nabendu,
If your customer asks for mails with specific text for message failure, tell that it is not possible. Because Message will go through several engines like Adapter Engine, Integration Engine, BPE. You can not generate mails for the message failures in all these areas with out standard alert mechanism. These are pure technical alerts which only PI people can understand, not business alerts.
Example: assume your sender channel is unable to connect FTP Server, in this case you can not generate even though you will develop adapter module to generate alerts.
So for message validation only you can send mails not for message failures.
thanks,
madhu -
Send email with html and images over Sockets
Hi! I'm sending email messages through sockets with html. So far is working great. But now, I need to include images in the html code, like a web page. I don't have any idea on how to do this. Sending image apart from the html code is not big deal, but how to put it in the code. I mean how to make this html code, work:
<table border="0">
<tr>
<td>Image in code</td>
</tr>
<tr>
<img src="what to put here"/>
</tr>
</table>This is the code that I'm using to send the html mail:
StringBuffer retBuff = new StringBuffer();
//BufferedReader msg;
//msg = new BufferedReader(msgFileReader);
smtpPipe = new Socket(mailHost, SMTP_PORT);
smtpPipe.setSoTimeout(120000);
if (smtpPipe == null) {
return retBuff;
inn = smtpPipe.getInputStream();
outt = smtpPipe.getOutputStream();
in = new BufferedReader(new InputStreamReader(inn));
out = new PrintWriter(new OutputStreamWriter(outt), true);
if (inn == null || outt == null) {
retBuff.append("Failed to open streams to socket.");
return retBuff;
String initialID = in.readLine();
retBuff.append(initialID);
retBuff.append("HELO " + localhost.getHostName());
out.println("HELO " + localhost.getHostName());
String welcome = in.readLine();
retBuff.append(welcome);
retBuff.append("MAIL From:<" + from + ">");
out.println("MAIL From:<" + from + ">");
String senderOK = in.readLine();
retBuff.append(senderOK);
for (int i = 0; i < to.length; i++) {
retBuff.append("RCPT TO:<" + to[i] + ">");
out.println("RCPT TO:<" + to[i] + ">");
String recipientOK = in.readLine();
retBuff.append(recipientOK);
retBuff.append("DATA");
out.println("DATA");
out.println("From: Steren <" + from + ">");
out.println("Subject: " + subject);
out.println("Mime-Version: 1.0;");
out.println("Content-Type: text/html; charset=\"ISO-8859-1\";");
//out.println("Content-Type: multipart/mixed; charset=\"ISO-8859-1\";");
//out.println("Content-Transfer-Encoding: 7bit;");
//String line;
//while ((line = msg.readLine()) != null) {
// out.println(line);
out.println(msg);
retBuff.append(".");
out.println(".");
String acceptedOK = in.readLine();
retBuff.append(acceptedOK);
retBuff.append("QUIT");
out.println("QUIT");
return retBuff;Throw all this away and use one of the numerous existing Java mail packages, such as javax.mail for a start.
-
Documaker : how to send Email for test
Hi Experts,
I want to do the test sending email from Documaker.
I can created the HTML file, but I can not figure out how to send mail for test.
This question might be very basic contents, but please let me know.
Thanks,You can find all of the Documaker documentation online at the following link: Insurance Documentation
Maybe you are looking for
-
How can I make parallel Instances of a VI, avalible through webserver URL?
Hello, I have a vi that I want multiple people be be able to access at the same time through the web. Each time a client accesses the URL I want the VI to start a new instance in paralles for them. So if 5 people went to the URL each would be using
-
Can I use a current number as my online number?
Hello! I'm interested in setting up an online number for my business, and I already have a phone number being used as my work number. If I could switch my current number to the online number, that would be amazing so that I don't have to change my nu
-
JMS - How to configure incremental redelivery intervals for an MDB
Hi all, I noticed that when message delivery in an MDB fails, the time to the next delivery attempt for the message increases with every failed delivery. The intervals are 5, 10, 20, 40 and 60 seconds. After this the interval stays at 60 seconds. Now
-
My macbook pro had to be repaired and I lost iPhoto in the process. How do I get it back?
My mother board had caps that were blown because I spilled coffee on the table and some got into the bottom vent of my computer. As a result of the repair, all my apps were gone and I am in the process of trying to get them back. I was easily able
-
Single invoice creation with reference two sales document type
Hi, I have created Sales contract & Sales Order.I want to create single Invoice with reference to both sales contract & sales order. Please give me the solution how to do that??????????? Thanks, Miku.