Send Email Notification to Assignees in Role Approval Workflow in OIM 11g

Hi Experts,
I am using a Custom Workflow for Role Approval in OIM (11.1.1.5.4). It is a two stage Approval Process.
First level Approval is Requester's Manager and Second Level Approver are Role Owners(Two users who are Role Owner in OIM).
I want to send a Email Notification to this Assignees when a request is assignd to them . So i have done Email configurations in SOA. and i am receiving Mail in English.
But, the requirement is the mail's language should be dependent on Locale of these users.
for example if locale of Manager is German then Manager should recieve mail of Request assigned in German Language.
and after manager Accepts the request, Request goes to Role Approvers where we have two User, So mail should go to this two users according to their Respective Locale.
So how can i achive this????
Thanks!!
TJ

One option would be to create views and then use the oob daily alert for each manager. If the number of managers is too much, then you should consider a custom timer job.
Your suggested approach is possible, but has potential issues in execution. I'd suggest the timer job first.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

Similar Messages

Multi Level Approval Workflow in OIM 11g R2

Hi everyone,
I want to develope a two level approval workflow in OIM 11g R2.
When I intent to provisioning a resource or an entitlement, this workflow will be executed.
This workflow is two level (serial approval)
First approver is manager of user, second approver is a custom group.
Is there any sample workflow like this?
How can I develope this?
Thanks.
Best Regards.

Hi, you can find the same in oracle assets link.
Download the guide for 11GR2.
http://www.oracle.com/technetwork/middleware/id-mgmt/overview/workflow-development-1868162.7z
Thank you,
Shashi

How to stop email notification on PO revision - PO approval workflow

This is part of the seeded POAPPRV Workflow. When a new PO is created, a notification is created (that requires acceptance). The PO is then revised before a response to the original notification has taken place, which deploys a new notification and closes the original one. When the original notification is closed with no response having been provided, the POAPPRV Workflow states:
"You earlier received the notification shown below. That notification is now closed, and no longer requires your response. You may simply delete it along with this message."
Can anyone tell me how to stop sending this second notification when notification is cancelled ?
Thanks,
Sunitha

When a notification is sent to a user and the user has a notification preference to receive e-mail notifications then the notifications will be sent via e-mail and they will also appear in the user's worklist.
If the user responds to the notification from the worklist (let's say approves) the notification will be responded to and will be removed from the worklist. Now, there is nothing that Workflow can do about the e-mail notification in the e-mail client (yahoo, ms outlook, gmail, etc). So if the user attempts to approve from there, the Workflow Inbound Mailer will realize the incoming e-mail corresponds to a notification that was responded to already. So it has to let the user know that his e-mail will not be processed. So the user will need to consider what he's done before sending an e-mail response.
Regards,
Alejandro

Sending email notifications in oim 11g approval flow dynamically

Hi,
I have 4 level approval workflow in oim 11g and developed custom composite to get all the approver ids and and assigning these ids into 4 variables.
And used these variables in my custom 4 level sequential workflow. This workflow is working fine. Now I need to update this composite to send email notifications to the approver. So updated code to retrieve email ids and to store them in 4 more vairables. I cannot send all emails at a time thru the code. I need to send email only to the corresponding approver only when the flow reaches to that particular level.
Subject and body will be same but the email address will vary.
Can you please let me know the step by step process to implement notifications to these many levels.
If you think, this is not correct approach (storing all email ids in variables and then sending notifications), please let me know correct approach.
Thanks,
Mary

The way to do it would be to put your human task inside a while loop. This while loop would set a variable to the approver's userid and would continue till all the four approve it. In your human task you need just one approver and that would be the variable which the while loop sets.
If you do it this way, then you can use the OOTB notification tab in the .task and select the 'Assignee' as the email notification receiver and you won't have to worry about getting the email ids as well.
As for the current approach which you have, that is of using the sequential approvers in the human task, I haven't tried it, but just try setting the notification tab in the .task to 'Assignee' and event 'On Assignment'. That should do it as well.
-Bikash

Not able to send email notification to adhoc role created

Hi All,
Have a requirement to send email notification to multiple emails from workflow. As per the given requirements have derived the emails and concatenated with comma (,) and passed to the API createadhocrole to create.
lRoleEmail has value as [email protected],[email protected]
wf_directory.CreateAdHocRole(role_name => lRoleName,
role_display_name => lDisplayName,
language => 'AMERICAN',
territory => 'AMERICA',
role_description => NULL,
notification_preference => 'MAILHTML',
role_users => NULL,
email_address => lRoleEmail);
A new role is getting created but there is no email sent.
Created a new attribute of role type and in the notification function have assigned the same as the performer.
The NOTIFICATION_PREFERENCE in WF_ROLES table is DISABLED for the new role.
If anyone came across same issue please let me know to to achieve this.
Thanks in advance.
MJ

You need to provide the correct email address but not the dummy address like '[email protected],[email protected]'. One more thing you can give only email address per one user or role. You cannot assign multiple addresses, if you do also it treats the entire string as one email address only.
After changing the email address, modify the notification preference to MAIL* and then send a notification.

Could not able to send email notification through approval workflow

Hi,
I am trying to send an email notification to the requester and approver on request creation and when the approver approves the request then an email should get triggered to the request with approve/reject outcome. All the SOA configuration has been done and also able to send test email through SOA console but could not able to send email through SOA composite.
For configuring an email notification, I am using notification tab in ApprovalTask, but still problem is not resolved.
Please help me in resolving the issue.
Thanks.

Use this link to check again whether you have configured the Email driver properties properly. http://www.iamidm.com/2012/09/oim-11g-r2-lab-6-managing-notifications.html
Also check whether any firewall issue is there which is preventing OIM to contact the email server in sending out emails. Check the logs if there are any issues.
Also check this system property 'RequestNotificationLevel'. This property indicates whether or not notification is sent to the requester and beneficiary when a request is created or the request status is changed. If the value is 0 for this system property, make it 1.
I was facing a similar type of issue due to two reasons:
1. System property
2. Firewall
Check both of them and try again.
Edited by: Durgaprasad on Apr 15, 2013 2:08 AM

Urgent: Regarding Sending Email Notifications

Hi all,
We have scenario in which we have to search those users who has not accessed their accounts from last 2 years and then send them an email notification and after one month of notificatio we have to search those users who have been notified but yet not accessed their account and delete those accounts from LDAP.
For this we are using JNDI to search users. Now we are facing two problems:
1. The users email ids are in the form of List. When we refer this list in To address of Email Template then it gives us an exception: Saying that service not responding, No recepient addresses while in case of hard coded values it runs successfully. I think this is due to that it requires a semicolon(;) seperated list to send email notification. Thats why we thought that we have to use some looping to send the notifications to one user at a time. But if there is any other solution, please suggest.
2. For the scenario of the users to be deleted, how will we come to know whether after two years the users have been notified successfully??
This is really urgent. Please suggest any idea regarding the above issues.
Thanks & Regards
Gaurav Jain

The way to do it would be to put your human task inside a while loop. This while loop would set a variable to the approver's userid and would continue till all the four approve it. In your human task you need just one approver and that would be the variable which the while loop sets.
If you do it this way, then you can use the OOTB notification tab in the .task and select the 'Assignee' as the email notification receiver and you won't have to worry about getting the email ids as well.
As for the current approach which you have, that is of using the sequential approvers in the human task, I haven't tried it, but just try setting the notification tab in the .task to 'Assignee' and event 'On Assignment'. That should do it as well.
-Bikash

Sharepoint Server 2013 not sending Email notification

I have a Sharepoint 2013 farm that is not sending any kind of email notifications. I also have a Sharepoint 2010 farm whit the same Outgoing Email settings and it is sending emails notifications normaly.
The SMTP service (the role) is in the same member servers of the 2013 farm, so it is reachable. The timer service is running well in both member servers of the 2013 farm. We don't have an On-premise Exchange enviroment because we use Office 365 (I cannot
set the sharepoint servers as allowed to relay in Exchange). The 2010 farm and the 2013 farm have the same Outgoing Email settings, I don´t know why the 2013 does not send emails. It is driving me crazy!.
How can I solve this?
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

What about Relay and Authentication?
Trevor Seward, MCC
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Look.
I think this is the correct configuration because it sends emails normaly with SharePoint 2010.
If I configure my own email account in Outbound Security, Sharepoint 2013 sends emails but just when I login to Sharepoint, if other users login it doesn't send emails.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Human Workflow is not sending Email notifications to AD users

Hi,
I'm trying to send email notification to the assigness from workflow. If I use the weblogic users with email attributes, Its sending mails. But once I switch to AD and use the AD users it's not. I have made the AD provider to be the first in the list and also able to login to the worklist app using the same user. Problem is that it's not sending mails.
Can anyone please help soon.
Regards,
Thejas

Can you explain what are AD users and how they are created(APIs)?
Please check that the user exists in wf_local_roles table.
select name,notification_preference, email_address from wf_local_roles where name = <AD Username>
In order to send email notification, the user/role should have the proper email addresses and notification preference set to MAIL* i.e MAILHTMl, MAILHTM2, MAILATTH, MAILTEXT..etc

Custom Event Notification (email) for Approval Tasks in OIM 11g

Hi,
how to create event notification for approval tasks in OIM 11g. I mean how to send email notification to user who sholuld accept or reject approval task?
best
mp
Edited by: J23 on 2011-05-30 04:08

Here is the documentation http://download.oracle.com/docs/cd/E21764_01/integration.1111/e10224/bp_notif.htm#SOASE548
Search for SOA BPEL Email Notifications for more information:
http://soa-bpel-esb.blogspot.com/2010/01/email-notification-in-bpel.html
http://download.oracle.com/docs/cd/B31017_01/core.1013/b28764/bpel013.htm
There are many more search links that can help you out.
-Kevin

OIM 11g - Email Notification with direct link to Approval Task Details

Hi,
We wanted to send email notifications to approver with direct link to the approval task details screen from which the user can either approve or reject the request. In OIM 11g OOTB Notification templates such as Request Creation contains the direct link to Request Detail screen which is something like
http://localhost:14000/oim/faces/pages/Self.jspx?OP_TYPE=LOOKUP;E_TYPE=MY_REQUEST&T_ID=65
Wondering if there is something similar for Approval Task Details screen as well.
Any kind of help or suggestion is greatly appreciated.
Thanks,
Deepa

If at all you cannot get the direct link for approve/reject then try the actionable email from SOA. Once you have that configured the emails gets approver/reject links so that approvers can directly approve/reject the task from email. If that works for you then you can look at the format of those links in the email and deduce what you need the url as.
HTH,
BB

Cannot Send Email Notification Using Stored Procedure.

Hi Friends,
I tried to execute this job scheduler...
begin
dbms_scheduler.create_job(
job_name => 'ILMS_JOB_SCHEDULE'
,job_type => 'PLSQL_BLOCK'
,job_action => 'begin ilms.check_reminder(); end; '
,start_date => SYSTIMESTAMP
,repeat_interval => 'FREQ=DAILY'
,enabled => TRUE
     ,end_date => NULL
,comments => 'Ilms job schedule for notification.');
end;
However, since the effect is too long I rescheduled the frequency to be every one minute in this set attribute...
BEGIN
DBMS_SCHEDULER.SET_ATTRIBUTE(
          name => 'ILMS_JOB_SCHEDULE'
          ,attribute => 'repeat_interval'
          ,value => 'FREQ=MINUTELY;INTERVAL=1'
DBMS_SCHEDULER.DISABLE('ILMS_JOB_SCHEDULE');
DBMS_SCHEDULER.ENABLE('ILMS_JOB_SCHEDULE');
END;
Check Reminder is the stored procedure invoked by job scheduler to check values in database columns before sending email notification to the respective recipients' email address and also the format of the email notification to be sent to the recipients...
CREATE OR REPLACE PROCEDURE check_reminder AS
NO number;
CURSOR emp_cur is
select * from pergerakan_ks where TASK_FLAG=7 and TASK_STATUS='InProgress';
emp_rec emp_cur%rowtype;
email_to varchar2(200);
default_email varchar2(200);
mesg varchar2(4000);
no_kes varchar2(100);
subj varchar2(4000);
kpi number;
crlf VARCHAR2( 2 ):= CHR( 13 ) || CHR( 10 );
BEGIN
default_email:='@abc.com.my';
FOR emp_rec in emp_cur
LOOP
if emp_rec.PKS_TKH_TERIMA is null then
dbms_output.put_line('count day ' || round(sysdate - to_date(emp_rec.pks_tkh_hantar)) || crlf || crlf);
if round(sysdate - to_date(emp_rec.pks_tkh_hantar)) >3 then
email_to:=emp_rec.pks_penghantar_id||default_email;
select b.KS_BIL_NO into no_kes from kertas_siasatan b where b.KS_ID = emp_rec.pks_ks_id;
subj:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
mesg:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
dbms_output.put_line('Sending email to ' || email_to || ' subject: ' || subj);
dbms_output.put_line('update old pergerakan pks_id : '||emp_rec.pks_id);
update pergerakan_ks set task_status='Done' where pks_id=emp_rec.pks_id;
dbms_output.put_line('insert new pergerakan ks : ');
insert into pergerakan_ks(pks_id,pks_ks_id,pks_km_id,pks_penghantar_id,pks_tkh_hantar,
pks_penerima_id,pks_tkh_terima,task_name,task_owner,task_status,task_flag,fb_id)
values(pks_id_seq.nextval,emp_rec.pks_ks_id,emp_rec.pks_km_id,
emp_rec.pks_penghantar_id,sysdate,
null,
null,emp_rec.task_name,
emp_rec.pks_penghantar_id,
'InProgress',6,emp_rec.fb_id);
commit;
e_mail_message(email_to,email_to,subj,mesg);
end if;
end if;
if emp_rec.PKS_TKH_TERIMA is not null then
dbms_output.put_line('emp_rec.pks_km_id ' || emp_rec.pks_km_id || crlf);
select c.KM_KPI into kpi from keluar_masuk_ks c where c.KM_ID = emp_rec.pks_km_id;
no := round(sysdate - to_date(emp_rec.pks_tkh_terima))-kpi;
dbms_output.put_line('count day - kpi' || no || crlf);
dbms_output.put_line('kpi ' || kpi || crlf);
if no = 1 then
email_to:=emp_rec.pks_penghantar_id||default_email;
select b.KS_BIL_NO into no_kes from kertas_siasatan b where b.KS_ID = emp_rec.pks_ks_id;
subj:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
mesg:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
dbms_output.put_line('Sending email to ' || email_to || ' subject: ' || subj);
email_to:=emp_rec.task_owner||default_email;
subj:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
mesg:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
dbms_output.put_line('Sending email to ' || email_to || ' subject: ' || subj);
e_mail_message(email_to,email_to,subj,mesg);
e_mail_message(email_to,email_to,subj,mesg);
end if;
if no = 3 then
select b.KS_BIL_NO into no_kes from kertas_siasatan b where b.KS_ID = emp_rec.pks_ks_id;
email_to:=emp_rec.task_owner||default_email;
subj:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
mesg:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
dbms_output.put_line('Sending email to ' || email_to || ' subject: ' || subj);
e_mail_message(email_to,email_to,subj,mesg);
end if;
end if;
END LOOP;
END;
E_mail_message is the stored procedure invoked by the check_reminder to tell scheduler information of the connection and the email address of the recipients...
CREATE OR REPLACE procedure
e_mail_message
from_name in varchar2,
to_name in varchar2,
subject in varchar2,
message in varchar2
is
l_mailhost VARCHAR2(64);
l_from VARCHAR2(64);
l_to VARCHAR2(64);
crlf VARCHAR2( 2 ):= CHR( 13 ) || CHR( 10 );
l_mail_conn UTL_SMTP.connection;
mesg VARCHAR2( 4000 );
BEGIN
select a.SERVER into l_mailhost from email_setting a where a.SERVER is not null;
select a.USERNAME into l_from from email_setting a where a.SERVER is not null;
--UTL_SMTP.open_data(l_mail_conn);
mesg:= 'Date: ' || TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss' ) || crlf ||
'From: <'||l_from||'>' || crlf ||
'Subject: ' ||subject|| crlf ||
'To: '||to_name || crlf || '' || crlf ;
mesg:=mesg||message;
l_mail_conn := UTL_SMTP.open_connection(l_mailhost, 25);
UTL_SMTP.helo(l_mail_conn, l_mailhost);
UTL_SMTP.mail(l_mail_conn, l_from);
UTL_SMTP.rcpt(l_mail_conn, to_name);
UTL_SMTP.data(l_mail_conn, mesg);
UTL_SMTP.quit(l_mail_conn);
END;
I tried to execute to execute the e_mail_message procedure but received this error. Also, no notification sent to the email address...
ORA-29279: SMTP permanent error: 501 5.1.3 Invalid address
ORA-06512: at "SYS.UTL_SMTP", line 21
ORA-06512: at "SYS.UTL_SMTP", line 99
ORA-06512: at "SYS.UTL_SMTP", line 241
ORA-06512: at "ILMS.E_MAIL_MESSAGE", line 33
ORA-06512: at line 13
Please help so that I can receive the email notification into my email...thanks in advance for your time..

user13281540 wrote:
ORA-29279: SMTP permanent error: 501 5.1.3 Invalid address
ORA-06512: at "SYS.UTL_SMTP", line 21
ORA-06512: at "SYS.UTL_SMTP", line 99
ORA-06512: at "SYS.UTL_SMTP", line 241
ORA-06512: at "ILMS.E_MAIL_MESSAGE", line 33
ORA-06512: at line 13This is not an Oracle error - this is the mail server saying "+hey, I don't like that e-mail address you are supplying, I'm not accepting it!+".
If you look at RFC821 (Request For Comments memo 821 describes the SMTP specifications), you'll see that the sender and recipient needs to be supplied in the format +<[email protected]>+, e.g. +<[email protected]>+.
I have found that not all SMTP servers are equal in this regard. Some may insist on the brackets around the address, some may not.
You need to confirm the format of the addresses you use in the "+MAIL FROM+" and "+RCPT TO+" commands.. and ensure that these formats are accepted by your SMTP server - and if not, change your code to use an acceptable format.
The easiest way to do this is using telnet - and interacting directly and manually with the server. SMTP is a clear text protocol and easy to use manually. Try it. It is the best way to test SMTP interaction and validate the approach and SMTP commands and arguments used by your code.

Cannot send email notification to more than one people

Hi everyone,
Hope anyone could help me to solve this. I want to send email notification to two people. First to the staff to alert him that his claim is ready. And also to his supervisor that the claim has been disbursed. Below is the PL/SQL procedure, check_claim being used..
CREATE OR REPLACE PROCEDURE TEST.check_claim AS
NO number;
CURSOR emp_cur is
select * from emp where dept=7 and status='active';
emp_rec emp_cur%rowtype;
email_to varchar2(200);
default_email varchar2(200);
mesg varchar2(4000);
subj varchar2(4000);
crlf VARCHAR2( 2 ):= CHR( 13 ) || CHR( 10 );
BEGIN
default_email:='@phantom.com';
FOR emp_rec in emp_cur
LOOP
if emp_rec.claim_status ='Y' then
email_to:=emp_rec.staff_id||default_email;
subj:='Claim No'||emp_rec.claim_id;
mesg:='Your claim has been disbursed. Please check.';
email_to:=emp_rec.staff_hod||default_email;
subj:='Claim'||emp_rec.claim_id;
mesg:='Claim No'||emp_rec.claim_id||' has been disbursed';
e_mail_message(email_to,email_to,subj,mesg);
e_mail_message(email_to,email_to,subj,mesg);
end if;
END LOOP;
END;
The first email_to is to be sent to staff_id and the second email_to is to be sent to staff_hod.
The PL/SQL procedure then called the e_mail_message procedure shown below for the connection information..
CREATE OR REPLACE procedure
TEST.e_mail_message
from_name in varchar2,
to_name in varchar2,
subject in varchar2,
message in varchar2
is
l_mailhost VARCHAR2(64);
l_from VARCHAR2(64);
l_to VARCHAR2(64);
crlf VARCHAR2( 2 ):= CHR( 13 ) || CHR( 10 );
l_mail_conn UTL_SMTP.connection;
mesg VARCHAR2( 4000 );
BEGIN
select a.SERVER into l_mailhost from email_setting a where a.SERVER is not null;
select a.USERNAME into l_from from email_setting a where a.SERVER is not null;
--UTL_SMTP.open_data(l_mail_conn);
mesg:= 'Date: ' || TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss' ) || crlf ||
'From: <'||l_from||'>' || crlf ||
'Subject: ' ||subject|| crlf ||
'To: '||to_name || crlf || '' || crlf ;
mesg:=mesg||message;
l_mail_conn := UTL_SMTP.open_connection(l_mailhost, 25);
UTL_SMTP.helo(l_mail_conn, l_mailhost);
UTL_SMTP.mail(l_mail_conn, l_from);
UTL_SMTP.rcpt(l_mail_conn, to_name);
UTL_SMTP.data(l_mail_conn, mesg);
UTL_SMTP.quit(l_mail_conn);
END;
However, the email notification only being sent to the supervisor / head of department. The staff concerned does not receive any email notification. Please help. Thank you for your time...

from wht i see
email_to:=emp_rec.staff_id||default_email;
subj:='Claim No'||emp_rec.claim_id;
mesg:='Your claim has been disbursed. Please check.';
email_to:=emp_rec.staff_hod||default_email; -- wrongit should be
email_to:=emp_rec.staff_id||default_email;
subj:='Claim No'||emp_rec.claim_id;
mesg:='Your claim has been disbursed. Please check.';
email_to:= email_to || ' , ' || emp_rec.staff_hod||default_email;

How can i send email notification from UCM?

Hi
I am new to this technology. I need to send email notification to the user's, whenever file is checked-in. What is the procedure to send an email notification let us take GMAIL from UCM.
1) Now I have installed UCM in my machine. Do I need to install any other software to implement this feature(sending email)?
2) I read it in a document, that configuration is needed in a config file in order to send email. What details do i need to give in these fields,
HttpServerAddress= ?
MailServer= ?
SysAdminAddress=?
SmtpPort=25
HttpRelativeWebRoot=/idc/
CgiFileName=idcplg
UseSSL=No
WebProxyAdminServer=true
3) Do I need to install any mail server? If so which software can i go with?? Is it possible to send email to gmail or yahoo acccount without installing mail server ???
Regards
Raj

You will need to have an SMTP server of some sort that you can use. I think out of the box, you may only be able to use an SMTP server that allows anonymous sending or sending unauthenticated (e.g. an internal server). Any good SMTP server (that is not an internal server) would not allow this for security reasons.
Thus, I think if you want to use an external SMTP server such as Gmail, you will need to write custom Java code. See this thread for more information: UCM SMTP server Configuration
Jonathan
http://jonathanhult.com

How to send email notification in different languages in Workflow ?? Urgent Help Needed

Gurus,
How to send email notification in different languages in Workflow? Can anyone send me some useful guidelines or link where it is mentioned.

There is no profile option available to specify whether send or not send email notification.
But after login, in preferences youcan set the notification preference value by which you can configure whether to send or not
to send email notifications.
If you select ''Do not send me mail' or 'Disabled' it will not send.
For other values it sends the notfication in different formats like text, html, attachments etc...
Edited by: sarojak on Jun 27, 2011 7:18 AM

Send Email Notification to Assignees in Role Approval Workflow in OIM 11g

Similar Messages

Maybe you are looking for