Send Email to both (home) and (work)

I would like to send to my contact list in Address book both their (home) and (work) address in one import, and it is only allowing me to highlight one or the other.
Is it possible.
The Best,
Seth

Seth:
This is not something I have done, and I am just thinking out loud. It seems to me that you will need to have double entries in address book for each member in the group, one entry with the home address, and the second with the business address. Then create two separate groups with the respective entries from Address Book, home and business. Then when you type in the name of the group, the addresses in each group, home and business, should fill in.
There may be a better way to do this, and if I find a better answer, I will get back to you.
cornelius

Similar Messages

Sending Email using both HTML and plain text

I could use some advise on how to start researching email for
both HTML and plain text messages.
I have a script called class.phpMail.php, but the code is
alittle advanced for me. Basically I can't get
it to work on my server and I don't know where to begin the
learning process here.
I talked to my provider, "HOST" company goDaddy.com and I was
told that to connect so that I could send email I would need this
line of code. They didn't say it should by in my php.ini file but
that was where I found it.
SMTP = relay-hosting.secureserver.net
This is the smtp address that my provider uses to make the
connection with my mail client.
I was told that with this line of code I would not need a
password or username
I did some further reseach and I found an article that stated
that my original error:
Warning: fsockopen() expects parameter 2 to be long, string
given in ...../php/class.smtp.php on line 105
was being caused by this code because the $port value needed
to be between 1 - 65365:
$this->smtp_conn = fsockopen($host, # the host of the server
$port, # the port to use ----- "this is line 105"
$errno, # error number if any
$errstr, # error message if any
$tval); # give up after ? secs
In particular the $port value was coming in corrupted and
that I needed to cast it.
I did as they suggested and made it an (int) as they
suggested.
$this->smtp_conn = fsockopen($host, # the host of the server
(int)$port, # the port to use
$errno, # error number if any
$errstr, # error message if any
$tval); # give up after ? secs
It resolved part of the error message however, the other half
of the error message is shown below:
Message could not be sent.
Mailer Error: Language string failed to load: connect_host
What exactly is the connect_host they refer to in this
message?
Would it be the string in my php.ini file refering to the
SMTP = relay-hosting.secureserver.net
I have allot of what I think are disconnected questions as I
really have just begun to work
with the mail() function. If anyone has the time to educate
this newbie into the wonderful
world of email() I would appreciate it.
Thank You
Kevin Raleigh

Sorry to dig up an old post, but we've spent the last few days trying to work out why an email campaign being sent from BC is going into the Junk folder of recipients that use MS Exchange. We've fixed quite a lot of issues, including the fact that Legacy Templates have random JS injected just before they get sent, so we had to switch to the new template system. We've narrowed the issue down to one of three things:
1. A missing alt tag on the tracking image that BC drops into the email (pretty unlikely)
2. The BC Europe IP (54.240.14.45) is blacklisted here: UCEPROTECTL2 (possible, but if you actually look it's not the IP itself, but another IP on the same network, so unlikely)
3. The fact that the HTML email has no text component.
I agree, BC is late on this but I think that it needs to be added, even if most users have HTML-ready email clients, spam checkers do seem to prefer multi-MIME emails.
This is backed up by the following SpamAssassin rule, which we are currently unable to resolve:
-1.105
MIME_HTML_ONLY
Message only has text/html MIME parts
You should also include a text version of your message (text/plain)
So in my opinion, BC do still need to add this as a feature, otherwise the system is not viable for our customers and we'll have to look elsewhere.

Sending emails with both body and attachment to multiple recipients

I have a requirement to send email with body and attachment to multiple recipients.
Body of the email is a standard text. It is a proxy-to-mail scenario.
Here is what I've done: (I'm using PI 7.11)
One mapping from Source to Target structure (format of the attachment text file)
Second mapping from Target Structure to Mail Package format.
In the second mapping I'm concatenating the output of first step into "Content" of the Mail Package.
"XIPAYLOAD" is the message protocol used.
The "Keep attachments" option in the Mail adapter allows only to send "Content" as attachment or as body of the email.
How to send an email with both content and text?
The other problem is even with using ASMA, I can't send email to multiple recipients. I can only do CC and TO for 1 person each - a total of 2. Although I can resolve this by creating mailing lists, it is better if this can be addressed in PI.
Thanks for any input you can provide!
Edited by: crazylad on Jan 18, 2012 3:39 PM

Thank you for your response Mikael.
For the first question, I was able to find the solution in the following blog:
XI Mail Adapter : Dynamically building attachment and message body content using a simple UDF
(I just needed to search with the right set of key words )
The key is to set the "Content Encoding" as "None" in the mail adapter. If this is not done, the mail will be sent with an attachment - untitled.bin containing both the mail body and the attachment text. Also, don't forget to check the "Keep Attachments" checkbox in the mail adapter.
Multiple recipients could be added by separating the email IDs with a Comma. I have used ASMA to set the recipients.

Displaying events as both Home and Work categories?

Is there a way to have a calendar event display as both a "Home" and "work" category?
Thanks.

Mark,
The only way that I know of is to click on the event and use iCal>Edit>Duplicate, and then change the owning calendar in the "Edit" bubble.
;~)

Send email to both supplier and buyer via Tcode me84

Hi,
Currently, after realeasing a Schedule Agreement in tcode me84, there is an email automatically send to the supplier.
And users have a requirement that the email should be send to the buyers as well.
Do you have any idea(s) on the requirements?
Thanks in Advance,
Hung

Hi,
I have tried to create a new output type. However, when I tried to assign the new output type to the PO I am not success. The reason is when I choose the partner as Buyer and assign the purchasing org( our buyer) then the system through an error. It says that the number for the vendor is not maintained in the master data.
Right now, I still do not find any solution in which when I released the SA via Tcode ME84, the system will send an email to both buyer ,which is our purchasing group, and our suppliers.
Please advice if you have any ideas.
Thanks in advance,
Hung

Syncing both home and work computers with iPhone

Is it possible to sync my home iCal with my iPhone and my work iCal with iPhone, so all events appear on my iPhone, but not have my work events merged to home and home events merged to my iCal at work? I want to keep the two desktop calendars separate, but have them combined on the iPhone. Is this possible? (I suspect not until the iPhone calendar has multiple calendars as iCal does) Thanks -- Rick

Hey Rick,
This is not possible, when you sync the iPhone to a computer for the first time iTunes will ask if you want to Merge, replace on computer, or replace on iPhone. You may want to Merge and choose the option to put events created on the iPhone on another calendar on iCal, that you will delete later.
You can always backup iCal before you start, by going to File> Back up iCal.
You can also leave feedback and request features added to the iPhone online here:
http://www.apple.com/feedback/iphone.html
Jason

I have 6.0.2 on both home and work machines - why is the new tab button to the right of tabs on one machine and on the other the button is next to the "home" button?

I just upgraded both machines, and don't understand why one is different than the other.

It worked! I had to restore defaults, and then add my customizations again, but that did the trick!
Thank you so much! It has been aggravating me for some time now... I will use this "Ask a question" feature much sooner next time! :)

ICal Alarm emails coming from home AND work email?

My iCal calendars are synced using MobileMe with my home computer and my work computer (and my iPhone). I'll sent an alarm on my work calendar to email me at work. I am now getting two emails sent TO my work email From my work email AND my home email. Is there any way to stop my home sending out work alarms?

Hi BenChase,
Select the calendar you don't want to send alarms in iCal's calendar list. Press Cmd-I to open its Info panel. Check the box that says 'Ignore alarms'.
Best wishes
John M

Is there a way to access purchased music on both home and work computers?

I've finally started using the iTunes music store after years of avoiding it and I've purchased and downloaded a bunch of songs on my home computer. Today I installed iTunes on my work computer and was about to buy some new songs when I discovered that purchased music can apparantly only be downloaded to one computer. What gives? I thought it could be shared with up to five computers!?! If anyone has a solution, please let me know -- i'm sure a lot of people have run into this problem...
Windows 2000

I discovered that purchased music can apparantly only be downloaded to one computer.
Correct
I thought it could be shared with up to five computers!?!
Also correct. If you want the tracks on another computer, you need to copy them there. See:
iTunes: How to copy music between authorized computers
And if you happen to also own an iPod:
How to use your iPod to move your music to a new computer

When using the Google search box in the upper right corner, midway through typing the search subject, Firefox switches to the Yahoo search box in the middle of the screen. This is very annoying and happens on both home and work computers.

Seems like Yahoo is the new Firefox default browser.

Then why not get rid of the Google search box if it's not going to work?

Desktop manager and Home and Work email

Hi folks,
I have Desktop Manager installed on both my home and work computers. At home, email is grayed out and I can do nothing as it says I do not have a connection to the server.
At work, it is active, but only addresses my work email from the Exchange Server and not my personal email which is set up through Blackberry and works on my phone. But sometimes I like to change the signature, etc.
Is there no way to get both on one or both instances of Desktop Manager to avaiod having to go to att.blackberry.com for personal email configuration?
Thanks!
~Bob

But your personal email is NOT on BES... those are two totally different animals.
ON BIS the Desktop Manager has nothing to do with mail and messages.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

TS3899 I have set up two email accounts on my iphone4, one with tiscali, my ISP, and the other on gmail. I am able to receive emails on both accounts, and can send emails from my gmail account, but am "Unable to Send Email" from my tiscali (talktalk) acco

I have set up two email accounts on my iphone4, one with tiscali, my ISP, and the other on gmail. I am able to receive emails on both accounts, and can send emails from my gmail account, but am "Unable to Send Email" from my tiscali (talktalk) account. I get the error message "A copy has been placed in your Outbox. The sender address "name"@tiscali.co.uk was rejected by the server".

Hi apmichael,
If you are having issues sending email from one of your mail accounts on your iPhone, you may find the following article helpful:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Regards,
- Brenden

My iphone 4 is stuck on the reboot logo, ive ried holding both home and power to shut it off snd then keep holding home to let you plug it into itunes but it doesnt work. what do i do?

my iphone 4 is stuck on the reboot logo, ive ried holding both home and power to shut it off snd then keep holding home to let you plug it into itunes but it doesnt work. what do i do?

Did you try rebooting the iPad? You will need to have some battery power for this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This may be helpful
iPhone, iPad or iPod touch: Not responding or does not turn on
Frozen or unresponsive iPad - Apple
iPad: Unable to update or restore

I have the IPAD3 and have set uip to receive both personal and work emails - I want to password protect both so children cannot access - is this possible ?

I have the IPAD3 and have set up to receive both personal and work emails - I want to password protect both so children cannot access - is this possible ?

You can Password protect your iPad, but if you want your children to play games on your iPad, then one you unlock it, they have full access, there is not an option to password apps, such as the Mail app.

Select between home and work addresses for Autofill

I've searched and browsed for this and I think I know the answer but I want to check before I submit a feature request to Apple and give up for now:
Can we choose between home and work addresses on our contact card when we have Safari perform autofills?
I think the answer is no, that only the first address listed in our contact card is used.
It would be most useful to be able to select the address used. Many of us have our contacts synced now between home and work computers and some of us are allowed to do occassional home business on work computers, or use our home computers for work.
I experimented with an alternative. I set up two contacts for myself, a home contact and a work contact. They both use my name. I find that in the Contacts app I can select which card is "my card", and that will be used by autofill. But I have to open Contacts to switch "my card" to use that for autofill. It would be more useful if Safari would simply provide a way to switch between home and work contact info on the fly, or at least switch between cards.
Am I missing anything?

Thanks, fruhulda. I do have both my work and home address on my card in
Address Book, and I agree that I should be able to choose which to use to fill in fields on a fax form. My question is how do I do that. I want to send a fax; I want it to feature my home information, but it's the work information that's automatically filling in. How do I change that?

Send Email to both (home) and (work)

Similar Messages

Maybe you are looking for