Send EMail to Multiple external users

Hi
Is there a way to send EMails to multiple external users dynamically. I can see that we can send EMails to only static Email addresses for multiple external users.
Thanks
Vidyadhar

http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10057e20-2ca2-2d10-1b91-a1b9a8c8e634

Similar Messages

Help with sending emails to multiple users.

Currently we have a process to send mail to muliple users by looping through the list of users and sending each individual an email
<Action id='1' name='sendEmail' application='com.waveset.provision.WorkflowServices'>
<Argument name='op' value='notify'/>
<Argument name='template' value='$(template)'/>
<Argument name='toUser' value='$(tuser)'/>
<Argument name='catch' value='notificationException'/>
</Action>
The variable tuser contains a single email address.
Is there any way to setup tuser to contain multiple email addresses?
I have tried passing a list and a string separated by colons (ex: <s>[email protected]; [email protected]</s>) and neither one works.
Question 2
Is it a bad idea to try and send email to up to 50000 users at once using IDM? Besides the fact that I would need to search for specific users and get their email addresses based on their capabilities.

Hi,
For sending emails to multiple users, use to instead of toUser. Put the names in comma seperated values
<Action id='0' application='com.waveset.provision.WorkflowServices'>
<Argument name='op' value='notify'/>
<Argument name='template' value='$(template)'/>
<Argument name='to' value='$(to)'/>
<Argument name='cc' value='$(cc)'/>
<Argument name='catch' value='notificationException'/>
</Action>
You can use IDM to send emails.
it will be a good idea to break down the email that you are sending into groups/batches. If possible, you can send email to DL s
Else, you can segregate the users based on roles and send emails. This will reduce the load. Hope it helps
Regards
Arjun
Edited by: arjun.sengupta on Dec 4, 2012 3:26 AM

Send Emails to Multiple Users ?

Hi,
I am working on the requirement where I need to create workflow in which I am sending email to multiple users. I have receiver list in a 'Z' Table. So I have to fetch those users from the 'Z' table on some conditions and send emails to them. I am send email to single user mentioned statically in Receipent box but I need to find the receivers dynamically and not able to send email to multiple users.
Please help me in this.
Thanks,
Ketan

Hi Ketan,
First af all create one MULTILINE container in your workflow say LT_EMAIL. its type should be SOXNA-FULLNAME.
Then thorugh some activity step, fill all the recepient's email addresses in workflow container LT_EMAIL. Then create one activity step type to send an email using SENDRASKDESCRIPTION method of business object SELFITEM. in the ADDRESSSTRING pass the multiple container LT_EMAIL and in TYPEID pass 'U'.
refere below link for BO programming in sap workflow Useful SAP Business Object Type programming macros.
Regards,
Ibrahim

Send email to multiple users using form

I am using following code to send email from forms.
But i want to send email to multiple users like atleast 10 users
It i sworking for one user.
If i give mail_pkg.send('tim@'oracle.com;[email protected]','Testing Oracle forms to send email','Testing oracle forms to send email','c:/x.pdf');
The email is not going
Can anybody help how to send to multiple users
Thanks for your help
T
PACKAGE Mail_pkg IS
session OLE2.OBJ_TYPE; /* OLE object handle */
args OLE2.LIST_TYPE; /* handle to OLE argument list */
procedure logon( Profile IN varchar2 default NULL );
procedure logoff;
procedure send( Recp IN varchar2,
Subject IN varchar2,
Text IN varchar2,
Attch IN varchar2
END;

As said,
Reports9i is better than Reports6i as far as sending emails is concerned. Reports9i allows you to send Reports in different formats as email attachements (PDF v3 is only one option). You can set subject, cc, bcc and some body text the way you want it. The Reports server only needs the address of a SMTP Server and you are ready to go. In Reports6i this is a bit more limited as you are not able to provide your own subject and body texts.
I know that you can do this with PL/SQL from teh databae, but never tried it before.
There is another option, which is to use a Java Bean in Forms for email. Thsi only works on the Web and a demo is included in teh Forms9i demos that can be downloaded from OTN. Though the demo is written for Forms9i it should work with Forms6i as well (not the Forms demo files because they are created in Forms9i).
Fran

How to send emails to Multiple Users from a Single People Picker lookup field using Sharepoint designer workflow

Hi All,
I am working with SharePoint 2013 designer workflow. we are using office 365.
Our requirement to send email to multiple users, get the user groups from lookup list people and groups column.
But SP designer sending emails to the first user alone.
Please guide me to proceed.
Advance Thanks.
Regards
Jenkins NS
Thanks and Regards Jenkins

finally I got a solution
Identified a workaround to solve the issue using SharePoint designer.
Step 1
Create a lookup list Example department
Columns
Title (by default) – Single line of text
Users – Person or Group
Emails – Multiple lines of text
hidden the Emails column (go to content type and set the column as hidden)
Create a SharePoint designer Workflow
Start Workflow automatically when an item is created
Also Start Workflow automatically when an item is changed
Workflow Stage 1
Set Emails to current Item: Users
The workflow will get all users email ids and add in the Emails column delimiter as semicolon.
Step 2
Create a custom list to get the email ids and send email
Create a lookup column ex: analysis and refer department list, Allow multiple values
Then Create a SharePoint designer workflow
full details workflow steps please follow below
URL
http://jenkinsblogs.com/2015/04/30/how-to-send-emails-to-multiple-users-from-lookup-list-people-picker-field-using-sharepoint-designer-workflow/
Thanks and Regards Jenkins

Send email to multiple users on form submit

I created a form with Shuttle object to select email addresses. Shuttle allows multiple select. But I am not able to send email to multiple email ids. Email is sent to only the first email id.
Please advice me on how to send emails to multiple ids on submit from shuttle
Thanks
Latha

Ok try this:
DECLARE
l_vc_arr2 APEX_APPLICATION_GLOBAL.VC_ARR2;
l_body CLOB;
BEGIN
l_vc_arr2 := APEX_UTIL.STRING_TO_TABLE(v(‘P8_EMPLOYEE’));
FOR z IN 1..l_vc_arr2.count LOOP
l_body := 'Thank you for your interest in the APEX_MAIL
package.'||utl_tcp.crlf||utl_tcp.crlf;
l_body := l_body ||' Sincerely,'||utl_tcp.crlf;
l_body := l_body ||' The Application Express Dev Team'||utl_tcp.crlf;
apex_mail.send(
p_to => l_vc_arr2(z),
p_from => '[email protected]', -- change to a real senders email address
p_body => l_body,
p_subj => 'APEX_MAIL Package - Plain Text message');
END LOOP;
END;
Thanks
Paul

On OnPremise, Sending email to multiple recipients doesn't work with SendEmail method

Hi,
We are creating a site collection on OnPremise from App by using Sharepoint Client API's (16 version).
After creation of site collection, we are sending an email to all site collection administrators. But we found that email is being sent to the only first person mentioned in the "To" list. For sending email we are using following method "Microsoft.SharePoint.Client.Utilities.Utility.SendEmail()".
We tried different scenarios by passing alternately domain username and email address.
Here are the findings for the different scenarios for the "To" field:
1) "domain\user1; domain\user1" => sends email to first user
2) "[email protected]; [email protected]" => sends email to both emails (at least shows in inbox To field, two occurances of email)
3) "domain\user1; domain\user2" => sends email to first user
4) "[email protected]; [email protected]" => sends email to first user
Here is the code we are using:
EmailProperties properties = new EmailProperties();
properties.To = to.ToList();
if (cc != null)
properties.CC = cc;
properties.Subject = subject;
properties.Body = body;
Utility.SendEmail(context, properties);
context.ExecuteQuery();
Please let us know what is going wrong here.
Thanks in advance for your valuable inputs.
Br,
Shriram
Shri07

According to the R16 Admin preview guide;-
"Send Email to Multiple Recipients
Expression Builder is now linked to the email address text field that is presented when the Specific Email Address
option is selected. Workflow administrators can enter multiple email addresses directly, or click the "fx" icon
beside the field, and use Expression Builder to define expressions that evaluate to one or more email addresses.
The benefit of this feature is that emails can be stored on any text field in the base record and multiple emails can
be sent using one workflow action. "
But how that works exactly is not clear, I have tried commas, semi-colons, spaces, apostrophes, doublequotes, to separate and try to establish the correct syntax without luck.
Bob - Perhaps you can do some digging and find out the correct syntax for multiple addresses?

Error while sending email to Multiple Recipients

Hi,
I am trying to send email to multiple recipients .It works fine if all the email-addresses are valid. If even one is invalid throws exception .I wish to send it all the valid addresses even if some are invalid as this email will be going to 3000 users some of them will be wrong addresses.
Help is greatly appreciated.
-ksg
Exception thrown:
Exception in SendEmail.setAddress as :javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
javax.mail.SendFailedException: 550 <[email protected]>... User unknown
Here is the main piece of code:
message.saveChanges();
Transport transport = session.getTransport("smtp");
transport.connect("myhost", "", "");
transport.sendMessage(message, message.getAllRecipients());
transport.close();

Hi there,
Well I find the easiest way is to use a comma delimited string with the following bit of code.
msg.setRecipients(
addrType,
InternetAddress.parse(smtpAddress, false));
addrType will be TO,CC or BCC
smtpAddress is a comma delimited string that I get from the results of a SQL Select request (looks something like "[email protected],[email protected],....,....,...."
The boolean false is to prevent the parse checking the validity of the SMTP addresses as I prefer to deal with this by letting the SMTP server tell me which addresses are no good.
Hope this helps,
SH

Send Notification to Multiple Internal Users

Hi everybody,
how can i send an email to Multiple Internal Users in BPM which are not known at design time?
I know i can use an expression, but i have a collection of type string (EmployeeID's). I can use the method getPrincipalByUniqueName(EmployeeID,"user") but employeeID is a collection and this method expected a single string.
regards,
Sid

Hi Anil,
my BPM-WebService will be called with a Request parameter:
users (1..*)
userID (string)
So at Run Time i get a collection or array with userID's like: SD4711, AN4712....
If i use getPrincipalByUniqueName("SP4711","user") i get the right user but i have a collection, so what could i do?
I can determine the interface by my self, so it is not a problem to change the interface if it is necessary.
How can i use getPrincipals(Sting(1..*) principalID)?
regards,
Sid
Edited by: Sid on Dec 13, 2010 3:21 PM

Sending email to multiple address using Utl_Smtp

Hi,
I want to send email to multiple address using the Utl_Smtp feature.
When I am sending email to one email address in the To:Field it works fine.However, when I send
to multiple address I am getting the below error.I am using a table(Email_test) to store all email id.
Error report:
ORA-29279: SMTP permanent error: 501 5.1.3 Invalid address
ORA-06512: at "SYS.UTL_SMTP", line 20
ORA-06512: at "SYS.UTL_SMTP", line 98
ORA-06512: at "SYS.UTL_SMTP", line 240
ORA-06512: at line 48
29279. 00000 - "SMTP permanent error: %s"
*Cause:    A SMTP permanent error occurred.
*Action:   Correct the error and retry the SMTP operation.
I am trying two options both ways I am getting error
Option 1:
Selecting two email id indivually in the select query as below
select email into v_Recipient1 from Email_test where Key_name='U1';
select email into v_Recipient2 from Email_test where Key_name='U2';
v_Recipient := v_Recipient1||';'||v_Recipient2;
Option 2:
Is there a way to use option
select email into v_Recipient1 from Email_test where Key_name='U4';
===========================================================
Create table Script
===========================================================
create table Email_test (Email varchar2(100),Key_name varchar2(10));
insert into Email_test values ('[email protected]','U1');
insert into Email_test values ('[email protected]','U2');
insert into Email_test values ('[email protected]','U3')
insert into Email_test values ('[email protected];[email protected];[email protected]','U4');
select * from Email_test
[email protected]                         U1
[email protected]                         U2
[email protected]                         U3
[email protected];[email protected];[email protected]     U4
select * from Email_test where Key_name in ('U1','U2','U3')
[email protected]     U1
[email protected]     U2
[email protected]     U3
select * from Email_test where Key_name='U4'
[email protected];[email protected];[email protected]
=======================================================
PL/SQL Block
===========================================================
declare
v_From VARCHAR2(80) := '[email protected]';
v_cc VARCHAR2(80);
v_Recipient VARCHAR2(80) ;
v_Recipient1 VARCHAR2(80) ;
v_Recipient2 VARCHAR2(80) ;
v_Subject VARCHAR2(80);
v_Mail_Host VARCHAR2(50);
v_Mail_Conn utl_smtp.Connection;
crlf VARCHAR2(2) := chr(13)||chr(10);
begin
--Mail Host name
select VALUE into v_Mail_Host from Server_info where server_name = 'SMTPServer';
select email into v_Recipient1 from Email_test where Key_name='U1';
select email into v_Recipient2 from Email_test where Key_name='U2';
v_Recipient := v_Recipient1||';'||v_Recipient2;
--for CC
select email into v_cc from Email_test where Key_name='U3';
v_Mail_Conn := utl_smtp.Open_Connection(v_Mail_Host, 25);
utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);
utl_smtp.Mail(v_Mail_Conn, v_From);
utl_smtp.Rcpt(v_Mail_Conn, v_Recipient);
utl_smtp.Rcpt(v_Mail_Conn, v_cc); -- To CC recepient
utl_smtp.Rcpt(v_Mail_Conn, v_BCC); To BCC recepient
utl_smtp.Data(v_Mail_Conn,
'Date: ' || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf ||
'From: ' || v_From || crlf ||
'Subject: '|| v_Subject || crlf ||
'To: ' || v_Recipient || crlf ||
'Cc: ' || v_cc || crlf ||
'Content-Type: text/html;' ||crlf ||
--'Hello this is a test email');
crlf || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf );
utl_smtp.Quit(v_mail_conn);
end;
Any suggestion how to approach this issue.
Thank you

Simple Mail Transfer Protocol RFC 5321 specifications.
      RCPT TO:<forward-path> [ SP <rcpt-parameters> ] <CRLF>
   The first or only argument to this command includes a forward-path
   (normally a mailbox and domain, always surrounded by ">" and "<"
   brackets) identifying one recipient.In other words, you can only define a SINGLE mailbox address at a time. Multiple addresses requires multiple repeats of this command verb, once per maibox.
Do not confuse this and the To: tag line in the Mime header that contains a comma delimited list of recipients. That tag line can contain anything - it is not parsed, not checked, and not verified as matching the actual recipient mailboxes as specified via the RCPT TO verb.

[SOLVED]How to send email to a local user?

I have installed Mutt, msmtp, procmail and I can send and receive emails to/from remote hosts and I'd like to send email locally also (to the recipients on the same machine as the sender).
When I try to send email to a local user from the root account -
echo "Test message" | mail -s "Test subject" localuser
then I get an error that connection to the port 25 is refused. Because the /etc/msmtprc file contains the 'localhost' as the default account's host, and on the local host I don't have a mail server listening on 25 port running.
When I try to send email from a non-root account which has in /$HOME/.msmtprc file a real email account on a remote server, then of course there is an error that the domain for the email address 'localuser' is not recognized.
How can sending email to local users be enabled?
Last edited by nbd (2014-09-30 22:33:37)

If I understand correctly, postfix it's a constantly running daemon. Seems to be an overhead for delivering only from time to time sent messages.
ewaller wrote:
> Out of the box, sendmail should be safe, but I think you have to enable local mail.
Currently I have msmtp-mta installed, which is described as having sendmail functionality. If I install sendmail - will it be possible to send local email without running email daemons?

Can't send emails to multiple recipients any more?

Yesterday I had to send an email to some 30 other people (I only do this occasionally).
It refused to go and I received this error message:-
I have several email accounts but each one was the same.
At that time I could not even send single emails but incoming emails were unaffected.
Later in the day I received this email from my ISP mail account.
Your emails may be blocked – please confirm your alternate BT Yahoo! Mail addresses
Dear Customer,
You’ve received a ‘553’ error message because we’ve upgraded your BT Yahoo! Mail account security to help protect against ‘spoofing’ – when people use alternate email addresses to disguise the real sender, possibly to commit fraud.
What you need to do
We need you to take a few minutes to confirm each of the BT Yahoo! Mail alternate email addresses you use are genuine. If you don’t, you might get more ‘553’ error messages and have problems sending emails. Just log in and follow these simple steps. We don’t ask for any personal information.
This is rubbish and I had a similar one last year which I ignored, as the simple steps were far from simple, and the following morning all was back to normal.
So I ignored this email and tried again this morning.
I was still unable to send emails to multiple recipients but now I can send single emails OK!
Any ideas what is going on?
Is it Mail's fault or my ISP's?

From the error message, it looks like there was a problem with at least one of the addresses ("NONE"). It is possible that a bad address is in the list you tried to send to.
I don't know anything about BT Internet, so I can't confirm the authenticity of the email you received.
You should be able to log into your BT account directly from the web without using any links sent in the email.
The email also seems to indicate you used an alias as the reply-to (from) email address.
You didn't mask out the username for your smtp server and it is definitely different from the from account. This may all be normal, but it does tend to match what the email is telling you.

Question regarding sending email to multiple recipients

Hi All,
I am creating a workflow that will send an email notification everytime a new campaign is created. I've learned that R16 is capable of sending emails to multiple recipients, the only concern I have is I can't find any doumentation on how to do it. It is stated in the R16 Administrator Preview Guide that you can select 'Specific Email Address' and enter multiple email addresses directly, I tried to enter multiple email addresses separated by comma - [email protected],[email protected],[email protected] as an example, but it doesn't work and prompts me to enter a valid email address. Could anybody guide me on how to enter multiple email addresses once the 'Specific Email Address' is selected or how to do it in the expression builder to define the expression that will define the list of emails. I know that using group email addresses can be used as an alternative to this requirement but I hope theirs a way to do this with workflows.
Thanks,
Wayne

According to the R16 Admin preview guide;-
"Send Email to Multiple Recipients
Expression Builder is now linked to the email address text field that is presented when the Specific Email Address
option is selected. Workflow administrators can enter multiple email addresses directly, or click the "fx" icon
beside the field, and use Expression Builder to define expressions that evaluate to one or more email addresses.
The benefit of this feature is that emails can be stored on any text field in the base record and multiple emails can
be sent using one workflow action. "
But how that works exactly is not clear, I have tried commas, semi-colons, spaces, apostrophes, doublequotes, to separate and try to establish the correct syntax without luck.
Bob - Perhaps you can do some digging and find out the correct syntax for multiple addresses?

Exchange 2007 - The server don't send dsn message for external users

Hello,
Our exchange 2007doesn't send dsn message for external users but for internals it is ok, I check my configuration but all seems to be ok
Have you any idea please?
Thx

Hi,
To narrow down the cause, let's firstly try to check the following configuration:
Get-TransportConfig |fl
Get-RemoteDomain | select identity, NDREnabled
Get-SystemMessage
Thanks,
Angela Shi
TechNet Community Support

Can I send email invitations to local users instead of push notifications?

I see in the documentation that "Attendees can be invited to events via email if they don’t have an iCal Server account." Is there a way to send email invitations to local users instead of push notifications? The server would be migrating from Exchange and everyone is accustomed to/wants email invitations for calendar events.
I've already purchased a copy of Lion Server (10.7.4) and pretty much everything is setup. Sadly I'm just now running into this issue. Email invitations to non iCal server accounts work fine.
Thanks for the help.

Hi gracem0324,
Go to Settings>Messages>Send & Receive, and click on your Apple ID and sign out of Messages. Then sign on again. Sometimes it needs to reset itself....
Cheers,
GB

Send EMail to Multiple external users

Similar Messages

Maybe you are looking for