Send event to print labels

Does anyone know if it's possible to use edg_utl sendToStage or sendToEdge to print lables?

Yes, of course. Use "send to edge". If I remember it right, there´s also a specific print method in the same package.

Similar Messages

Problem printing labels on dot-matrix printer

I am currently using Oracle Reports v 3.0 on an NT network. I need to print labels on an Epson LQ-570+ printer. The user will run a number of reports which will create a file for each location we need to send to. The user will then send 10 - 20 files to the printer at a time. The problem I am having is that since we went to Reports 3.0 on NT if a file has only one label, it will print that label then page forward spitting out 10 blank labels. It then prints the next file. We are using continuous feed labels and are wasting a LOT of labels. I have tried to reset the page size in the properties page of the report but no luck. Any help would be greatly appreciated!

hello, I could not write English, but I will help you
You could see it in SYSTEM PARAMETERS of reports, in the MODE option, putting the to initial value Character type
You also have to see the Dflt.prt file, that this located in the C:\ ORAWIN95\ REPORT60\ PRINTERS, the who you control the margins of
impression in manner [caracter]. They for [default] are 80 Columns and 66 Lines, the
who you could publish and change the courages
You count me if I operate you.
Greeting

Problem printing labels and envelopes from Address Book

I am very frustrated by the impossibility, when printing labels or envelopes from Address Book, of including both an individual name and a company name on the label or envelope. The Address book will only print one or the other. When sending correspondence to a person in a large company or building, the correspondence will not get to that person with only the company name or the individual name. It shocks me that in all these years I have been a Mac user, Apple has never noticed and fixed this fundamental problem. I would now like to buy an Ipod or an Ipad, but I am reluctant because I do not want to have to sync my addresses to Apple's juvenile address book. Is there any solution to this?

!http://i46.tinypic.com/2nvn6f.gif!
"It shocks me that in all these years I have been a Mac user, Apple has never noticed and fixed this fundamental problem.
Is there any solution to this?"
Upgrade to Snow Leopard!
Or check out the Mail & Address Book - Tiger Forums & ask if there is a work-a-round.
!http://i50.tinypic.com/izvwo1.gif!

Not able to print label getting standard text as it appears in so10

Hi,
I have a so10 object ,script contains only one window i.e main and we call so10 object in script by using statement 'Include &standrdtxt& object text id ST lang EN' ( standrdrxt contains text name)but instead of printing label it is printing the exact thing maintained in so10 object. the so10 object contains lines as mention below
<STX><ESC>K<ETX>
<STX><60>SI<62>L1000<ETX> , etc.....
As it is apperaing in the print preview,what is the <STX>....<ETX> and where it is maintained .What should i do so that label get print .

Hi,
The below is the full information what exactly is happening .
the user had a Win 2000 computer that the Intermec 3600 is attached through nullmodem serial cable as a local printer. The user would log on to SAP on that computer and selected the ZNW_DTILABEL transaction (driver program). Within the transaction, the user would specify LOCL to send communication to printer. The Win 2000 machine is being replaced due to discontinued support issues later this year.The new machine has Win XP and does not currently communicate with printer.
user is telling that
There must be something in this transaction programming that assumes language from Win 2000 that a recent 1/12/2010 Hotfix KB97220 had to be removed off the Win 2000 computer in order for the SAP transaction to communicate to the printer.
I don't find anything in coding which is not allowing to print label, if i print from my PC i am getting text <STX>...<ETX> as said in first post instead of label.what would be the problem with XP or wht needs to be maintained in XP.

How to print labels on zebra printer LP2844

Hi,
can anybody help me regarding how to print labels on zebra printer LP2844.
Thanks

Thanks for reply
I had gone thru the manuals but how to send the Escape sequence to the printer from a java program?
Any sample code for that in java will be very helpful.
Thanks.

Is it possible to print labels on thermal printers using BI Publisher

Hello,
I am aware that BI Publisher can print barcodes on its output. But what I am not sure of is if it can print to thermal printers. A search didn't return anything specific on this. The way I have used thermal printers (Zebra, in my experience) in the past is that we send an encoded text output to the printer which decodes the text and prints the label. The codes contain the formatting attributes for the label.
I am wondering if BI Publisher is the correct tool to use in our EBS instance or if we should just create a concurrent program and send the encoded output to the printer (of course, we will not be able to view the final output from the view requests form).
We have a single instance and have the need to print labels in various font types (code 128, EAN-13) on thermal printers. Could someone throw some light on this? Thanks
Shreedev

Have your DBA install FOP and then find a good xml style sheet editor. Or have them install jasperreports and then use ireports to format them...
Thank you,
Tony Miller
Webster, TX
On the road of life...There are 'windshields', and there are 'bugs'
(splat!)
"Squeegees Wanted"
If this question is answered, please mark the thread as closed and assign points where earned..

Printing Labels in Sapscript Printer SATO, Code 128

Hello Experts, i need your help.
Please, i want print labels in my form Sapscript. The printer is the type SATO and the code is 128.
The label is the material number.
I don't have any idea how to do it, what i must declare in my form, wich style. In the internet, i see that we do some calcul and we add some symbols. I don't understand why the calcul, what these symbols.
Please, can anybody explain me the steps and what i must do it?
Thank you very much.
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Jul 10, 2008 4:10 PM

--> Or else, you could do it in a more manual fashion. Condition records are required in this case also, when the event happen(eg : when Packing done in Delivery ), SAP creates a flat file, and save it in the destined folder. Then, a person manually login to the Label software, select the particular label and the flatfile from which data should flow..and click print... In this case also, no sap script, no standard text...
It is your job to find, which approach your company is using...This is the way Bartender, Label shop Pro (Intermec Printers design tool ), Auto Label (autobag printers design tool ) etc work. Disclaimer : i have never worked on either SATO or Label Gallery.
Now about Label Design..
1. You create a label using your label design tool. (it is just like Visual basic or even our dear SAP's screen design tool.)
2. you can drag and drop the barcodes, text containers, variable fields etc. For eg, if you have something like
Customer Part Number : |||||||||||||||||||||||||||||||||||||||
PRN ZYZSDFGH
--> drag a text field : write Customer Part number in that.
--> drag a barcode field. when you place a barcode field, you will have option to select whether code 128 or data matrix of whatever the standard you need. also in the properties box of the bar code, you can select, where do you want to print the human readable form of partnumber. (whether on top of barcode, center or below the barcode).
3. Save the label. there should be a provision on the label design tool, to convert this label into ITF format. do that. now we have for eg, barcode_label1. ITF.
4. go to SO10 in SAP. give name zbarcode_label and hit create. From Menu> Text> Upload--> select radio button ITF. then browse in your system for barcode_label1.ITF. save the standard text. here is a sample of a standard text.
<STX>H6;o727,23;f3;c20;h1;w1;d3,Quantity:;<ETX>
<STX>H7;o1008,444;f3;c20;h1;w1;d3,Line:;<ETX>
<STX>H8;o1008,26;f3;c20;h1;w1;d3,Customer PO#:;<ETX>
<STX>H9;o867,25;f3;c20;h1;w1;d3,Customer P/N:;<ETX>
<STX>H10;o94,26;f3;c20;h1;w1;d3,Item:;<ETX>
<STX>H11;o124,26;f3;c20;h1;w1;d3,Desc:;<ETX>
<STX>H12;o1167,497;f3;c20;h1;w1;d3,Phone:;<ETX>
<STX>H22;o1102,28;f3;c20;h1;w1;d3,Cust:;<ETX>
<STX>H23;o1073,497;f3;c20;h1;w1;d3,GTC Line: ;<ETX>
<STX><ESC>F0<DEL>&ADRC-NAME1&<ETX>
<STX><ESC>F1<DEL>&MAINITEM-MATNR&<ETX>
<STX><ESC>F2<DEL>&MAINITEM-ARKTX&<ETX>
<STX><ESC>F3<DEL>&MAINITEM-BSTKD&<ETX>
<STX><ESC>F4<DEL>&MAINITEM-ZSUNITQTY&<ETX>
<STX><ESC>F5<DEL>&MAINITEM-POSEX&<ETX>
<STX><ESC>F13<DEL>&ADRC-TEL_NUMBER&<ETX>

Address Book freeze or crash when printing labels/envelopes

I am trying to print mailing labels or envelopes from Address Book. I can print lists but everytime I try to print mailing labels it appears to go into a "sorting" loop and will not respond. When I try to print envelopes and hit print, it crashes. I have read about problems with smart groups but I have no smart groups. The last time I printed mailing labels I had no problem but my operating system at that time was Tiger. Any help?

I created a second entry with the spouse's name, and then to be more selective in who I send them to (so that it isn't sent to both Jones'), I added the word "Christmas" to the notes for one of them only, repeated this process for all the contacts that I needed to. Then create a SmartGroup that is looking for Christmas in the notes and print labels for that group.
Yeah, that zoom feature was completely out of whack when I was doing this too; actually, the preview pane was entirely off at times.
Another useful thing would be to be to able to specify which spot on the sheet of labels to start printing; if I've got a partially used sheet, then its a total pain to be able to start printing on the 8th label down in the 2nd row; I'd have to create bogus entries for Mr. Aaa Aaa and copy that as many times as I need to so that the printing is correctly aligned. Pretty big oversight I must say.

Printing label on TEC SX4 from Sapscript

I try to print label on TEc printer SX4 from Sapscript. i am studying TEC Sample code. for example following below:
     [ESC]C[LF][NULL]
     [ESC]D0500[LF][NULL]
     [ESC]PC00;0020,0050,2,2,2,00,01[LF][NULL]
     [ESC]PB01;0020,0200,4,6,0,0100[LF][NULL]
     [ESC]RC00;MAt[LF][NULL]
     [ESC]RB01;1234567890[LF][NULL]
     [ESC]I[LF][NULL]
i am sending this text on command prompt as   > copy test1.txt lpt1
but i can not print a label.
Does anybody know how to do it ?
Thanks in advance

Hi Manish,
You will have to go ahead and get the license for the software.
Barone software is another option for designing Labels for Zebra Printer.
Compare and make your decision.
Cheers
Ajay

Print labels from SDK

I need to be able to print labels from within SDK but I want to make the label format accessible by my customer. Does anyone know of a way to link in to something like ALD from SDK?
Gordon Wood

Gordon,
The SDK does not have a facility for accessing the PLD or the ALD products. You can use the Report Service to capture print information and parameters to send to a third-party report writer such as Crystal that you can then use.
Eddy

Print labels row*column wise

Hi Gurus,
We have a requirement to create a report which will print labels (RTF layout using XML publisher). Our client wants supplier information (labels, single label of 8 lines) to be printed on a single page i.e. on A4 size paper, 3*8 = 24 labels should get printed like- (Below Lxy is a single label with 8 lines, x and y denotes numbers below)
L01 L02 L03
L04 L05 L06
L07 L08 L09
L10 L11 L12
L13 L14 L15
L16 L17 L18
L19 L20 L21
L22 L23 L24
This will be a nightly job and once client will come in the morning all the labels will get printed on the A4 size papers. These number of labels in a single request may vary as well eg- it can be either 4 during one night or 29 during another, so this has to be taken care while printing.
I can not call it as a matrix report as number of rows and columns may both get changed dynamically.
Is anybody came across the same requirement? Please provide your valuable inputs.
Thanks in advance.
Rgds,
Sumir

HI,
Here you go good program links
<a href="http://www.sapfans.com/forums/viewtopic.php?t=52107">How to Set Color to a Cell in AVL</a>
<a href="http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_color.htm">ALV Grid Coloring</a>
Thanks
Mahesh

How do I get spouses and children on to printed labels and envelops?

I store spouses and children in the fields provided for these names. When I go to print labels, Address Book puts the primary name and one randomly selected child name on the first line. So if the person is Jane Smith, I have her spouse listed as John, and two kids listed as Jake and Janice, the label will read.
Jane Smith and Janice
142 Main St.
Nowhere, NH
Can I get the spouse name and the other kids to show up? How?
+Also, any tips on dealing with couples with two last names? That's more of a data entry question, but if anyone has ways this works for labels but also for logical address book and iPhone look up.+

Turn iCloud contact syncing off and choose keep when prompted.

In Address Book, I would like to have a field "File As". So, l can list "Joe Smith", as "The Smith Family". I will use this when I print labels for Xmas cards and such. Thanks!

In Address Book, I would like to have a field "File As". So, l can list "Joe Smith", as "The Smith Family". I will use this when I print labels for Xmas cards and such. Thanks!

In Address Book, I would like to have a field "File As". So, l can list "Joe Smith", as "The Smith Family". I will use this when I print labels for Xmas cards and such. Thanks!

When printing labels for each printed label a blank label comes out of the printer

Hello Experts
We have a CR report which is designed to prints labels for the items using a label printer. After an upgrade that we have last month the settings for this report are missing so the labels were coming out wrong.
Due to this I have had to reconfigure this report and its printing preferences and so far I have managed to make the prints fit in each label. But the problem is that if I try to print 5 copies of a label, the 5 labels come out of the printer just fine, butt after it another 5 blank labels come out of the printer too.
I have tried with all parameters in "Printing preferences", mainly in the "Material" tab but nothing works.
Thanks in advance and regards

Hi,
Please check below SAP note and let me know your feedback:
1043235 - Label/thermal printers are not supported by SAP Business
One
Thanks & Regards,
Nagarajan

Eventing and Print Jobs

Hey all! I am attempting to write a script that will collect information about print jobs on a print server and write the data to a database. I am trying to get data on print job owner, printer name, whether it was color or grayscale, number of pages and
number of copies.
I am running into a problem finding a method to collect events for print jobs. I have attempted to subscribe to creation and modification events of the Win32_PrintJob class, which is ok but doesn't seem very accurate about details like pages printed
and color/grayscale. I next attempted to respond to these events by using Get-WinEvent each time the event fires and then using the JobId property of the event to scan the PrintService log for matching 307 and 805 events. However, I have found that the Win32_PrintJob
JobId does not seem to match the document id in the event log entries.
I scrapped that idea and instead attempted to collect .NET events for the NTEventLog class but this only seems to work with the traditional logs such as system, security and application.
I suppose I could just scan the event logs on a regular basis and collect print job information that way, but I was really looking to collect and log this info in real time rather than just looping every so often. Has anyone else tried eventing for any of
these classes? Is it possible there is another .NET class I could subscribe to that would provide me with details of incoming print jobs? Am I going about this entirely the wrong way?
Thanks!

Hi Matt,
Maybe you can try the .NET class for printing:
Function Get-PrintJobs
<#
.SYNOPSIS
Return the list of jobs on the current printer
.DESCRIPTION
This function returns a list of pending jobs on the specified print server for a given queue
.PARAMETER ComputerName
Name of the print sever
.PARAMETER Name
Name of the print queue
.EXAMPLE
Get-PrintJobs -ComputerName ps -Name HPLJ5000
.LINK
http://scripts.patton-tech.com/wiki/PowerShell/PrintServerManagement#Get-PrintJobs
#>
Param
$ComputerName,
$Name
Begin
$Host.Runspace.ThreadOptions = "ReuseThread"
if ((Get-WmiObject -Class Win32_OperatingSystem).OSArchitecture -eq '64-bit')
$SystemPrinting = Get-ChildItem "$($env:systemroot)\assembly\GAC_64\System.Printing"
$SystemPrintingFile = Get-ChildItem -Name "*system.printing*" -Recurse -Path $SystemPrinting.FullName
$SystemPrintingFile = "$($SystemPrinting.FullName)\$($SystemPrintingFile)"
else
$SystemPrinting = Get-ChildItem "$($env:systemroot)\assembly\GAC_32\System.Printing"
$SystemPrintingFile = Get-ChildItem -Name "*system.printing*" -Recurse -Path $SystemPrinting.FullName
$SystemPrintingFile = "$($SystemPrinting.FullName)\$($SystemPrintingFile)"
$ErrorActionPreference = "Stop"
Try
Add-Type -Path $SystemPrintingFile
$PrintServer = New-Object System.Printing.PrintServer("\\$($ComputerName)")
$PrintQueue = $PrintServer.GetPrintQueue($Name)
$PrintJobs = $PrintQueue.GetPrintJobInfoCollection()
Catch
Write-Error $Error[0].Exception
Break
Process
End
Return $PrintJobs
Refer to:
A print management library
If there is anything else regarding this issue, please feel free to post back.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang

Send event to print labels

Similar Messages

Maybe you are looking for