Send Fax from SAP
Dear Experts,
Need to integrate the FAX with SAP. Can anybody please advise how the FAX integration with SAP(ECC 6 ) happens using SMTP.
Best Regards
Bhagwat
Hello Bhagwat,
SAP Note 44062 (Windows FAXpro) http://service.sap.com/smb/sbocustomer/howtoguides88 , You need to have S user ID with proper rights for this link. If you have issue for find this docuement then use ctrl + F botton then write FAX it the easy way to find .
Check the below URL for connecting SMS/FAX by using SMTP..
URL for SAPHELP : http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
Hope it will solve your configuration part...
Similar Messages
-
Line Alignment Problem while sending Fax from SAP Script
Moderator message: please do not post the same question in different forums
Hi Experts,
While sending fax the horizontal lines are not displaying till the end of the page.
But in the print preview the lines are displying till the end.
If this is printed using local printer the lines are printing fine but the problem is with the fax.
Please provide me a solution for this.
Regards,
Rajesh.
Edited by: Matt on Nov 25, 2008 2:51 PMPuzzling.
I've seen where the printed output doesn't match the print preview but not a fax not matching a print.
Do you use SAPConnect or the older SAPComm method for faxing?
How do you produce the horizontal lines? BOX commands, ULINE, '-', etc.? -
Problem sending Faxes from Change Order(IW32) in NW 2004s
Hello Everyone,
We have just recently upgraded our version of SAP from 4.6c and we have discovered an interesting issue when trying to fax shop papers from IW32.
In 4.6c we had configured a output device in SPAD that would redirect the output to SCOT via SAPcomm to our Rightfax fax servers. With the new version of SAP the functionality for creating an output device of type 'FAX' has been disabled since SAPConnect has replaced SAPComm.
How we used to do this is we'd goto IW32, enter an order and choose the menu function Order/Print/Order you could then enter the device type and also the recipient's fax number and the country code.
When we try this in the new system no fax is created, when we remove the device type (clear the box) we still do not create a fax output. When we specify another device (i.e. printer etc) we get an error stating that this is not a Fax device and the request fails.
Does anyone know of a way to correct this problem since our users would like to continue to fax shop papers from our system.
Regards,
JamesJuan,
We are able to send faxes from SAP to our rightfax system without issues. This is not the problem we are experiencing.
The issue is when you try to fax something from IW32 via the option Print/Order/Print. It requires a spool output device to be specified.
Since you cannot create an output device of type FAX anymore and you cannot use another type of device type to send the fax we are trying to figure out how to get these printouts to be redirected to SAPConnect and SCOT.
Regards,
James -
I am using SAP Office to fax from SAP and this is going through RightFax. The faxing goes through except that the cover sheet has a whole bunch of German stuff in it like 'An/To/Pour' (for To) and 'Von/From/De' for From and some of the address stuff also has some German stuff in it - what setting do I have to do so that it prints in English only?
Any help or pointers would be much appreciated.
Thanks,
Ravi.Hi William,
We are using SAP ECC 6.0 and that's where I am trying to fax from. When I say SAP Office, I mean SAP Business Workplace (t-code sbwp). This then uses SAP Connect and then via RightFax to send the fax.
Thanks,
Ravi. -
Cannot Send Email from SAP Business One
Hi Experts
I have configured SAP Email Services from the Mailer Service and Customer can send emails all the while,
Now I have an Issue for One User,
Iam using the Same Machine, Same Database with Manager Login, I can send Email from SAP with Attachments
But When I use another Super user the system is not delivering the Email and it Goes to the Sent box (but not delivered)
Have anyone encountered the Issue before
Please hep to solve this issue permanently
Thanks and Regards
Vinodh Kumar MohanHi Vinodh Kumar Mohan,
If the email can be found in Sent box, it must be delivered already.
The problem could be on the email recipient side. It may go to the junk mail.
Thanks,
Gordon -
hiii
<b>Is it possible to send mail from SAP to External user??????if possible does BASIS people had to do something???</b>
I want to send the email from sap to external user([email protected]).My mail will consist of some changes made in production order(CO03). for which i had created the BADI. That part is over now i want to send the mail.
<b>I got many sample programs in sdn but when i enter the email address it execute but mail is not sent.....I want to know by just executing Zprogram mail will be sent or there is some role for BASIS also..............</b>
Thanking you.
Regards.There is a transaction called SCOT that needs to be configured
http://www.sap-basis-abap.com/sapbs035.htm
http://www.sap-img.com/basis/basis-faq.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm -
Send email from SAP using SMTP-AUTH
Dear all,
I would like to send email from SAP to external SMTP server using authenticated method.
Can I set up this scenario with SAPConnect?
Or are there any other methods to set up this scenario?
Thanks, Regards,
FendhyHi,
You dont need anu authentication to be set :
Just follow below steps :
Simple steps to do the SMTP configuration :
1. Use transaction SCOT
3. Double Click on SMTP
4. You will get a window and fill in description
5. Tick the "Node in use" box
6. Enter the hostname of the email exchange server
7. Mail port will be 25
8. Click on the button next to Internet called "Set"
9. You will get another window, in the "address area" box, enter *
10. Click the green check button to exit the second window
11. Click the green check button to exit the main window
12. From top menu: Settings -> Default Domain
13. in the small box that appears enter the domain name which is the last part after the @ sign. The domain name would be company.com
14. You need to define a job to process the email, from top menu: View -> Jobs
15. From top menu: Job -> Create
16. Enter a name
17. Click on "INT" in the list then "Schedule job" button
18. Enter start date and time, then click on "Schedule Periodically" button
19. Enter something like every 10 minutes.
20. the configuration is now complete. To test it, you need to have an email defined in your user id properties. Use SU01 for that.
21. Use transaction SO00
22. Put Title, and text in the body, then enter your email address below, the recepient type would be "internet address"
23. After a maximum of 10 minutes you should get the email address.
Regards,
Nirmal.K -
Error while sending mail from SAP
Hello All,
Recently we are facing an error while sending mail from SAP. When we try to compose a message ,it is moving to a dump error RAISE_EXCEPTION.
The details from ST22,
Short text
Exception condition "FOLDER_NOT_EXIST" raised.
Error analysis
A RAISE statement in the program "SA
condition "FOLDER_NOT_EXIST".
Since the exception was not intercep
program, processing was terminated.
Kindly suggest..
Thank You,
Regards,
HasanHello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu -
Unable to send fax from computer
Hi,
I'm unable to send faxes from my computer (e.g, from Word). I get a message: "The device is disconnected or powered off", which is not true.
The printer is an HP LaserJet 1536dnf MFP.
The OS is Windows 7 Ultimate, 64-bit, with 8 GB RAM.
I have updated to the latest firmware from the HP site, and have downloaded the latest appropriate driver package for this printer from there as well (hp_M1530_MFP_full_Solution_usb_n_w.exe)
The installation goes normally, and there are no error messages.
The printer is working fine. I am able to print and scan from the computer without problems. I am also able to fax directly from the printer without problems. The only problem is not being able to send a fax directly from the computer.
For instance, in Word (the latest version), when I print to the HP fax printer (which has indeed been installed correctly on the computer), I get a message that the doc has been send to the printer. But no screen pops up letting me type a phone number, and after about 1 minute I get this error:
Have been on the phone for several hours to HP support, and although they did a complete uninstall, and reinstall, the problem persists.
I also downloaded and ran this file from HP: HPLJ_M1530_Fax_IE_11_utility.exe, which is meant to resolve a very similar issue for people who have this Microsoft KB installed (KB2898785), which somehow interferes with the fax exactly as I have described. I do indeed have that Windows update installed. However, running the file did not solve the problem, and there seems to be no way of uninstalling that KB.
So I am at a loss, and would appreciate any help, if anybody can think of anything.
Many thanks
TimHi @Tim613 ,
I see by your post that you are unable to send a fax from the computer. I would like to help.
Since you are able to print and scan from the computer, you don't have a communication issue. The printer will also send a fax, so it isn't a hardware issue. It sounds more like something possibly on the computer is blocking the fax communication.
The Toolbox doesn't support Windows 7 64 bit, but you should still be able to fax through Third Party Software. (Word) Which you have already tried and it didn't work.
I would disable all the start up programs and temporarily turn off the Antivirus Software to see if there is a program interfering in the back ground. How to use MSCONFIG . Click on the start up tab and click disable all.
Try sending a fax again.
Then you will have to go back and enable the startup programs and turn the Antivirus Software back on again.
Let me know the outcome.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Error while sending mail from SAP to external mail id
Hello Experts,
I am blocked by the below problem.
I am trying to send email from SAP to an external email ID. I have tried using Class approach as well as the function 'SO_DOCUMENT_SEND_API1' for the same.
Everytime i get the following message:
Internal error: CL_SMTP_RESPONSE ESMTP error code is not known. 554 554 <email address> Sender address rejected.
I am not at all able to figure out why this type of error is coming.
The same code is working on the development environment but not on the test system.
Please reply back asap as i am completely blocked due to this.
Thanks/Regards,
HimanshuHello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu -
Message SR 053 when i send idoc from SAp R/3 4.6C to PI 7
Hi,
I try to send idoc from SAP r/3 4.6C to PI 7. I had made ALE configuration in my sender system ( SAP 4.6C) but idocs are not sent to PI. In SM58 i have message "Name or password is incorrect (repeat logon)". Yet i'm sure that user and password are correct because if i test RFC destination using SM59 , test is OK.
Is somebody can help me ?Hi,
In R/3 :
my RFC destination is type 3 and point to XI. The port in the partner profile point to this RFC destination. ( all seems good !).
In Xi : i created a port and i load manually idoc in idx2 to be sure that RFC destination was OK. Nothing in IDX5.
When i send idoc MATMAS using BD10 from R3 to Xi i have something very strange: first the message B1 038 "1 master IDocs set up for message type MATMAS" and just after
the XI logon screen appears !! Then message "1 communication IDoc(s) generated for message type MATMAS" and this idoc stay in SM58 with message "Name or password is incorrect (repeat logon)".
Somebody can give me requires caracteristics for XI user used in R/3 RFC destination ? -
How do I set up the fax program so I can send faxes from my mac
How do I set up the fax program so I can send faxes from my mac
Do you have a fax machine or fax modem? If not, then you cannot fax over telephone lines, but you can subscribe to one of many eFax services.
-
Error in sending mail from SAP to microsoft outlook
Hi all.
Greetings.
I have a requirement to send mail from SAP to Outlook.
SMTP is configured here....i have checked the steps.
I am using FM "SO_NEW_DOCUMENT_SEND_API1" to send the mail text.
when i check the SOST Tcode i got message "Wait for communications service".
after evry 10 minutes the sap connect all process runs..as it is configured in SCOT transaction, but even after 30 minutes the mail is not sent.
I don't know how should i check the error message?
tell me the checking stepls plz?...how should i step through in checking this?
what are the prerequsites for sending mails from SAP to Microsoft outlook?
regards
Prashant Tiwari
Edited by: prashant tiwari on Feb 6, 2009 10:26 AMHi prashant,
Pls refer to the link below:
Re: Inbound Email- SAP Connect
or
check your userid .
If not correct no mail will go from u r id.
Try it with another user id.
or try using the following function module
'SO_NEW_DOCUMENT_ATT_SEND_API1'
I Hope this helps you with the issue.
Thanks
Ravi Aswani -
Function module to send mail from SAP
Can any one please tell the Function module to send mail from SAP. The scenario is like this,I have a file in local system that i have to send to a particular mail address like [email protected] through a report program.
Hi shafiq,
1. There is some trick involved
in the binary files.
2. I have made a program (and it works fantastic)
ONLY 6 LINES FOR EMAILING
BELIEVE ME
ITS A FANTASTIC PROGRAM.
IT WILL WORK LIKE OUTLOOK EXPRESS !
3. The user is provided with
a) file name
b) email address to send mail
and it sends ANY FILE (.xls,.pdf .xyz..)
Instantaneously !
4. Make two things first :
1. Include with the name : ZAMI_INCLFOR_MAIL
2. Report with the name : ZAM_TEMP147 (any name will do)
3. Activate both and execute (2)
4. After providing filename, email adress
5. Code for Include :
10.08.2005 Amit M - Created
Include For Mail (First Req F16)
Modification Log
Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
CODE FOR PROGRAM
5.
REPORT zam_temp147 .
INCLUDE zami_inclfor_mail.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
regards,
amit m. -
Problem while sending mail from SAP
Hi ABAP gurus,
I tried to send mail from SAP. For this we configured SMTP Services using the transaction SCOT and all are Completed.
When I send a mail using SAPOffice it is Executing successfully and main is delivered to me.
When I tried in the program using the function module 'SO_NEW_DOCUMENT_SEND_API1' mail is not delivered to me but it is placed in SAPoffice outbox.The status of the mail says "SEND PROCESS STILL RUNNING". Even when i execute SAPconnect manually mail is not transmitted.
This is the transaction history of the mail.
Trans. history
18.02.2006 13:44:31 Document sent
13:44:31 Wait for communications service
After This stage Delivery attempt is not taking place.
This is the Code
****Document DATA
EMAIL_DATA-OBJ_NAME = 'MESSAGE'.
EMAIL_DATA-OBJ_DESCR = SUBJECT.
EMAIL_DATA-OBJ_LANGU = 'E'.
EMAIL_DATA-SENSITIVTY = 'P'.
EMAIL_DATA-OBJ_PRIO = '1'.
EMAIL_DATA-NO_CHANGE = 'X'.
EMAIL_DATA-PRIORITY = '1'.
***Receiver
EMAIL_SEND-RECEIVER = '[email protected]'.
EMAIL_SEND-REC_TYPE = 'U'.
EMAIL_SEND-EXPRESS = 'X'.
APPEND EMAIL_SEND.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = EMAIL_DATA
DOCUMENT_TYPE = 'RAW'
PUT_IN_OUTBOX = 'X'
IMPORTING
SENT_TO_ALL = SENT
NEW_OBJECT_ID = EMAIL_ID
TABLES
OBJECT_CONTENT = EMAIL_TEXT
RECEIVERS = EMAIL_SEND
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
Please Help me to solve this Problem.
Regards,
Viswanath Babu.P.DHi viswanath,
1. in scot, in smtp node,
2. press the internet button
3. In ADDRESS AREA,
type
*yahoo.com
*rediffmail.com
etc,etc.
4. Only when such domains are entered,
will sap send mail.
5. It will not send any mail to other domains.
6. Or simply enter *
regards,
amit m.
Maybe you are looking for
-
Spry menu bar changed since I tried to split cells in a table! Help!
I am VERY new to web design, so I apologize in advance for being ignorant. I am trying to learn! I had inserted a spry menu bar that looked fine and even tested fine! I subsequently tried to split a section of my table in the web page in order to ha
-
Problem with edit icon in apps table
We are facing a strange issue in HcmGroups. While enabling and disabling the edit icon in the apps table, we are using selection event to toggle the visible property. We are unsetting the selected row key attribute of the af:table so that upon compon
-
Enable logging for FTP server in 10.8
Can't figure out how to enable 10.6-style logging for FTP server in 10.8. It used to be configurable via Server Admin allowing you to choose what to log and so on and the logs would go to /Library/Logs. Now I only see some irrelevant stuff in /var/lo
-
HT1541 Why can't I use store credit to gift apps?
I have money on my Apple ID and want to gift apps. I don't want to register a credit card. Why can't I use my store credit to gift?
-
Organizing launchpad for all users
Hi all, I'd like to make Launchpad more useful for our users – the default arrangement isn't that suitable for our lab since it buries the most used programs. Is there a way to load a preset arrangement of the icons in Launchpad in Mavericks for user