Send files to/fro FCP, they're out of synch when they return -- why?

I'm cleaning up a project and choosing "send to soundtrack audio file" from final cut pro. The clip opens, I apply filters, save as reference file, and when I open and render in FCP, the clip is out of synch a few seconds, and so I have to manually synch it up. Any idea why this is happening?
The underlying files the take is on is very long, I just captured full reels, don't know if that would have something to do with it, but it's quite annoying to have to hand synch every clip I process. Thanks.

Jeff:
Wrong forum ! This is Compressor forum. Post in SoundTrack and/or FCP forums.
Good luck !
Alberto

Similar Messages

TS3899 I drafted an email, hit my home button and went to Safari before sending the email or saving it as a draft. When I returned to mail, the email I was working on cannot be found. How can I recover it?

I drafted an email, hit my home button and went to Safari before sending the email or saving it as a draft. When I returned to mail, the email I was working on cannot be found. How can I recover it?

I've found that since I installed iOS7, I've had this problem a lot. In iOS6, I was initially cautious about leaving a draft open and unsaved while I used other apps, but soon found it was quite reliable and they were always still there when I returned to Mail.
With the first version of iOS7, the draft was almost certain to be gone when I returned. Since iOS7.0.4 it's a lot better, but not reliable enough to trust. I've got into the habit of using Cancel/Save Draft *every* time I need to use Safari, etc, before continuing with an email I'm typing. It's just not worth having to retype it.
Note that when you return to the Mail app, you don't have to go to the Drafts folder to find your draft again. Just tap and hold the New Message icon, and a list of drafts will appear. The most recent one will be at the top. I've found that this tip makes the idea of having to cancel, save and reopen much less tedious.

Why is audio out of synch when I share (export) to mp4, BluRay (FCPX 10.0.9)?

Audio that is carefully synched to the video in the timeline appears off by several frames once I share the files to Bluray or mp4. I believe, but will double check that I exported to DVD without this issue. Any suggestions for fixes would be greatly appreciated. Paul

Sorry it took a few days to reply Russ. I wanted a chance to go over the videos carefully.
It does not drift further out of synch, and the synch issue only affects a few short segments of a 42 minute video, one near the beginning, another near the middle and another nearer the end. The segments that have the issue ones were ones I overdubbed audio from an external recorder (Zoom H6) that I used when the video was shot. However, there are many more segments in the video that were similarly overdubbed using the Zoom recordings where synch is not a problem.
On the weekend I tried making compound clips of the problematic segments in the hope that it might accomplish something but it didn't make a difference at all in the Blueray disk I burned-which I played on my aging Samsung Bluray player.
Here's another interesting fact about this problem: all of the mp4 files, I discovered, play perfectly in synch on my Mac. It is only on a PC that some parts are out of synch. Should I be using Quicktime files for PC instead of MP4?
Thanks for your interest in my little problem Russ.

Sound out of synch when backed up to pc

I've backed my .mov files to my pc and when I play them with QT the sound is garbled. They're fine on my iPhone but not on my pc. What am I doing wrong?

The best solution would be to use a DV capture utility and then import the resulting file(s) into final cut.
Aplle itself offers capture utilities, which can be found in the Developer Firewire SDK:
http://docs.info.apple.com/article.html?artnum=305924
You need a free Developer account and to download the SDK there. After installation you will find a new folder on your harddrive called "Developer"
There are several capture utilities in the program section of the SDK. You want to use the one called "VirtualDV". It´s very simple, but powerful though. It does capture without sync loss, compared to capturing via the Quicktime framework, like Final Cut and iMovie do. It simply grabs the raw DV stream coming from the Firewire interface.
After the capturing you have a Quicktime readable raw DV file, which easily can be imported to be worked with in any DV capable software.

Accessing the sender file name in the response email

Hi,
I have an asynchronous proxy scenario wherein I am calling an outbound proxy within an inbound proxy.
Basically a file is sent from an external partner and response is sent back to them if there are any errors. Also email notification will be sent and that email should include the sender file name so that they can know which file is erroneous and can resend that file after making changes. Any help will be appreciated.
Many Thanks.

Hi,
Have a look just two threads below yours !!
File recr Adapter : How to set target directory based on sender interface ?
See "Adapter-Specific Message Attributes" for a Sender File Adapter
http://help.sap.com/saphelp_nw70/helpdata/EN/e3/94007075cae04f930cc4c034e411e1/content.htm
I suppose your flow is:
1. File -> PI -> proxy_req     (request)
2. proxy_resp -> PI -> Mail   (response)
Thanks to "Adapter-Specific Message Attributes" ofr a Sender File Adapter, you will be able to store filename in DynamicConfiguration and then you will able to use a UdF to catch the source file and provide it somewhere in your proxy_req.
After for the returned flow "2. proxy_resp -> PI -> Mail   (response)", your proxy_resp has to returned to PI the filename providen with the 1st step.
And then, In PI you will be able to send by email the source filename.
Regards.
Mickael

Cant send files from NOKIA 7230 to PC using blueto...

Hello, I purchased a bluetooth dongle and connected it to my PC. I paired my PC and nokia 7230. I am able to send files from PC to nokia 7230 successfully. But when I try to send from nokia 7230 to PC i get service not supported. I am using windows 7. Any help please?

when u plug in your phone to your computer, on your phone select data transfer. If an error message apears on your phone saying its unable to connect, restart your phone and plug it in again. after selecting data transfer, your phone's memory should appear as a flash drive on your computer. select images for your pictures. the pictures are in folders arranged in date order. for videos go to the videos folder. the videos are in MP4 format.
can't wait for n97 successor

Sender file adapter Adapter with out Key field

Hi All
i do have have a requirment ,Sender file adapter , for FCC but file is with out Key field
HEADER>
<DATA1>
<DATA2>
<DATA3>
<HEADER> file structure
<ITEM>
<ITEM1>
<ITEM2>
<ITEM3>
<ITEM
and the file si
'10001,20081902,US
10,soda,1
30,soda,4
40,soda,5
10002,20081902,US
10,steel,1
30,steel,4
40,steel,5
, and i need to identify the Header and Item using there lenght only , please anyone as idea abt this help me

Why to post the same question TWICE... in 30 min ? you don't like the answers ?
File content Conversion Issuse for a Sender File Adapter

Socket connection time Out - Sender File adapter (Intermittent Issue )

Dear FrIends,
In our sender file adapter i am getting the following issue:
I have already places timout : 120 secs.
This isssue is occuring intermittently.
Error occurred while connecting to the FTP server "100.142.131.30:21": java.net.ConnectException: Socket connection timed out: 100.142.131.30:21

Hi Renu,
You need to increase the timeout Seconds and check.
Run the report RSFTP002.
and check whether the connection to FTP works. Provide the below parameters:
user = <your ftp user>
pwd = <your ftp pwd>
host= <your ftp host/ip>
command1 = <ls>
RFC Dest = SAPFTP
Compress = N
If the issue still exists, then check with your BASIS Team.
http://www.sap2048.com/socket-and-connection-issues-in-java-web-services-1351.htm
Thanks,

When I attach a JPG file in my email and send it to a Windows friend they get the message "The file type being saved or retrieved has been blocked when they try to open it." Anyone know why and how to fix this problem?

When I attach a JPG file in my email message and send it to a Windows friend they get the message "The file type being saved or retrieved has been blocked when they try to open it so that they can save it." Anyone know why and how to fix this problem?

Your Windows friend should ask in a Windows forum why his email client won't open attached jpg files. We have no idea what email client he is using or how his Windows security is configured.

How do I send files from my IMAC via bluetooth to my ne Ipad. They will not "pair" but they are connected and discoverable. I send a file from Imac snow leopard OS X 10.6 to the ipad but the failure message says the ipad does not have the ncessary servr

How do I send files from my IMAC via bluetooth to my new Ipad? They will not "pair" but they are connected and discoverable. I send a file from Imac snow leopard OS X 10.6 to the ipadusing bluetooth, but the failure message says the ipad does not have the necessary services. What are these? Do I neeed to have iphoto and ms word to send pix and .doc files?

File Sharing over Bluetooth is not a feature of iOS devices. iOS does not include the required Bluetooth profiles to allow this. You cannot add this feature, so you may as well stop trying.

The messages on my Iphone and Mac don't match, My Mac is lacking messages. Do they only show if the sender has an iPhone, trying to figure out if thats what the missing names have in common, or if it a different problem?

The messages on my Iphone and Mac don't match, My Mac is lacking messages. Do they only show if the sender has an iPhone, trying to figure out if thats what the missing names have in common, or if it a different problem?

Messages on the mac will only show iMessages sent from an iPhone, another mac, iPad etc etc...
It won't show SMS / Text messages.
If the messages are green on your iphone then they are text messages... Blue are iMessages

Is anyone having problems sending files from SendNow now that they've used Send?

I sent a couple files in Send and now I cannot send files in SendNow. It tells me to check my internet connection and that it cannot send the files. I've reset the internet connection and it still does not work. I even tried send a file through Send and it worked fine, but when I went back into SendNow I got the same message. Are other people having issues with this? Any suggestions?

It is very strange because I've always used Google Chrome to use SendNow
and I've never had a problem until this morning after trying Send. I went
it and tried it in Firefox and it worked fine, but still doesn't in Chrome.
Not sure what happened because I used Send in Chrome and it worked fine.
Thank You,
Roxanne Schutz
Gatehouse Media, Inc. NE Holdings, Inc.
Heartland Classifieds- Maverick Media, Inc.
Penny Press 1, Penny Press 4, News-Press,
Syracuse Journal-Democrat, Hamburg Reporter
P.O. Box "O"
Syracuse, NE 68446
1-877-269-3358
[email protected] <[email protected]>
This message may contain confidential and/or privileged information. If
you are not the intended recipient or authorized to receive this for the
intended recipient, you must not use, copy, disclose or take any action
based on this message or any information herein. If you have received this
message in error, please advise the sender immediately by sending a reply
e-mail and delete this message. Thank you for your cooperation.

File Sharing in FCP Using the Shared Folder

The following message from QXZ appeared last February. It never received an answer that solved the problem. I find that I have the same problem with my FCP 3 and 5 versions. Anyone know a solution?
I'm having trouble setting up our new FCP HD system so that different editors can open and save projects under their own usernames.
I set up a directory on the root level of the hard drive called FCP Projects and, as the superuser, set permissions on the directory to allow Read/Write by all users by setting chmod 777 -R /FCP\ Projects.
In theory this should have allowed Read/Write permissions on all files within the directory.
However, when I open an FCP project from that directory (or any directory) as a user other than the user who created the project FCP throws an "Access Denied" error when I try to save any changes to the project.
Anyone know why this is happening? I find it difficult to believe that an application written for a multi-user operating system does not support sharing projects between multiple users.
G-4, G-5 Mac OS X (10.4.6)

Although you have allowed open access to all users to save files in that directory, it's a pointless excersise as you have no system in place to allow one user to overwrite another users files. There's more to multiuser file access than simply making a place where you can all save files. Files created by each user have a unique user ID attached, and without a Group system in place for your users, OSX will (correctly) deny overwrites. You're going to need to learn about the unix filesystem and the chgrp function, and establish your users as being members of a Group before they can all overwrite each others files. It's much too large a topic to get into here, but a spot of research will sort you out. A word of caution though - filelocking is not a trivial subject and you probably want to consider other options - what happens if someone screws up a project and overwrites it 'behind the back' of another user?

Read uniquely named file. Sender File Adapter unsuitable for synchronous

Hi All,
We have a requirement to read a specific file that has a unique name based on a transaction ID. The transaction ID will be passed from the source application.
The communication is required to be synchronous. There could be multiple requests/files generated and present at the directory at any given time but each corresponding to a specific transaction ID. If the file is not yet generated for that transaction ID we return back an error to the calling system.
I think we can not use Sender File Adapter - because of the dynamic naming and also because we have to return a synchronous response back depending on the file availability. i.e. We can not have a defined pattern in the file name nor can we specify a wild card as there could be more than one files in the location.
In theory we could use the File Sender adapter to read all the files in the directory and a BPM with correlation set based on the transaction ID and let the process wait for the request. But as far as possible I want to avoid this unnecessary wait or extra demand on the system. More so because the files could get big.
If I were using a tool like SAP Business Connector or webMethods then I would I used a readFile Java service and given it a filename to return the required bytes in a synchronous read.
Is something like this possible in XI? If someone has written a synchronous Java to read file can they share the code? Or do you suggest I write a ABAP server proxy to read the file? The problem however will be how do we map the data to a XML within the code.
All suggestions welcome. There has to be a simple and effective solution to this mundane requirement !
Wishing all SDNers a bright start to this new year,
Thanks,
Charu
Message was edited by:
Charu Kulkarni
"The transaction ID will be passed from the source application so we know what file to pick"

Hi,
You could make the scenario a little simple and avoid custom development if the logic can be put into scripts(out of XI).
Say all the files are coming into a directory called D1.
Here, you could use a script to arrange all these in an order (say ascending) and move the first file into another directory D2.
The sender file adapter would poll this directory D2. The adapter can have a wild card character for the filename field now.
Once the file is in XI, you could check this against the transactionId present(I am not sure how you get this though!), and determine whether to send a mail, or to send a file back.
Here, I have assumed that there is somekind of order present in the files placed in the directory D1.
Again, this is just a suggestion.. I might be wrong with all the assumptions.
Regards,
Smitha.

Sender File Adapter - No error, but not generating any message

I am working on a file to RFC scenario. The sender file adapter is using content conversion to read a comma delimited file. The file is being picked up and archived correctly, and the adapter monitor does not show any errors. However, the process disappears at this point. I don't see any messages in SXMB_MONI, and there is no sign that the process is reaching the RFC adapter. Has anyone ever had this happen before?
I have four line types for Buildings, Additions, Floors, and Rooms.
I list all four in the recordset structure, and I identify a key for each with the keyFieldValue parameter. I list a fieldSeparator of ',' and an endSeparator of 'nl' for each row. And i have a list of the fieldnames in the fieldnames parameter.
The only thing i'm not sure about is the keyFieldinStructure parameter. I have specified ignore there, because I don't want that field in my XML. Do I still need that field in my sender datatype, even if I'm ignoring it, or can I leave it out?
Thanks for any help. Please don't just list blogs unless they have something you think is helpful with my specific problem. I have already read all of the blogs that deal generally with the sender file adapter and file content conversion, and I need more specific help at this point.

I made one error before, it IS showing up in the Recovered Adapter Audit Log (it took that log about 10 minutes to open that particular tab so I didn't notice them there).
Here is what it says there:
2006-06-12 11:22:59 Success Channel CC_S_File_FIPM_Buildings: Entire file content converted to XML format
2006-06-12 11:22:59 Warning Channel CC_S_File_FIPM_Buildings: Empty document found. Proceed without sending message
2006-06-12 11:22:59 Success File "/interfaces/one line building.txt" archived after processing
Here are my parameters in the file content conversion:
Buildings.fieldNames     RecordType,PLTXT,STORT,STREET,POST_CODE1,CITY1,REGION,PARNR,X_COORD,Y_COORD,ASSIGN_SQ_FT,BLDG_NUM,CAMPUS,GR_SQ_FT,NET_SQ_FT
Buildings.keyFieldValue     'B'
Buildings.fieldSeparator     ','
Buildings.endSeparator     'nl'
Buildings.keyFieldInStructure     ignore
Additions.fieldNames     RecordType,ASSIGN_SQ_FT,BLDG_ABBR,CAMPUS,ADDITION,BLDG_USE,BLDG__NUMBER
Additions.keyFieldValue     'A'
Additions.fieldSeparator     ','
Additions.endSeparator     'nl'
Additions.keyFieldInStructure     ignore
Floors.fieldNames     RecordType,BLDG_ABBR,CAMPUS,ADDITION,FLOOR,ASSIGNABLE_SQUARE_FOOT,BLDG_NUMBER
Floors.keyFieldValue     'F'
Floors.fieldSeparator     ','
Floors.endSeparator     'nl'
Floors.keyFieldInStrucutre     ignore
Rooms.fieldNames     RecordType,SHTXT,MSGRP,ADDITION,ASSIGNED_DEPT,BLDG_ABBV,FLOOR_CAMPUS,AREA,RCD_CODE,DEPT_CODE,BUILDING_NUMBER,ROOM_COMMON_KEY
Rooms.keyFieldValue     'R'
Rooms.fieldSeparator     ','
Rooms.endSeparator     'nl'
Rooms.keyFieldInStructure     ignore
And here is my data type:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_FIPM_BuildingUpdate xmlns:ns0="urn:XXXXXX:FIPM:Buildings:SYS">
   <Buildings>
      <PLTXT/>
      <STORT/>
      <STREET/>
      <POST_CODE1/>
      <CITY1/>
      <REGION/>
      <PARNR/>
      <X_COORD/>
      <Y_COORD/>
      <ASSIGN_SQ_FT/>
      <BLDG_NUM/>
      <CAMPUS/>
      <GR_SQ_FT/>
      <NET_SQ_FT/>
   </Buildings>
   <Additions>
      <ASSIGN_SQ_FT/>
      <BLDG_ABBR/>
      <CAMPUS/>
      <ADDITION/>
      <BLDG_USE/>
      <BLDG_NUMBER/>
   </Additions>
   <Floors>
      <BLDG_ABBR/>
      <CAMPUS/>
      <ADDITION/>
      <FLOOR/>
      <ASSIGNABLE_SQUARE_FOOT/>
      <BLDG_NUMBER/>
   </Floors>
   <Rooms>
      <SHTXT/>
      <MSGRP/>
      <ADDITION/>
      <ASSIGNED_DEPT/>
      <BLDG_ABBV/>
      <FLOOR/>
      <CAMPUS/>
      <AREA/>
      <RCD_CODE/>
      <DEPT_CODE/>
      <BUILDING_NUMBER/>
      <ROOM_COMMON_KEY/>
   </Rooms>
</ns0:MT_FIPM_BuildingUpdate>
I'm going to recheck everything again, but maybe you guys will see something? I don't.
Vanda

Send files to/fro FCP, they're out of synch when they return -- why?

Similar Messages

Maybe you are looking for