Send flash vars to popup ASP window

how can I send data from a flash webpage to an ASP page which
has to open in a popup window.
I can do them both seperatly, but how to integrate those 2 in
1....
Here's my script...
Attach Code
function PlaceOrder(){
SEND DATA TO MY ASP PAGE
var oFTransmit:LoadVars = new LoadVars();
oFTransmit.lang = _level0.languague;
oFTransmit.firstname_sender =
_root.form_tofriends_mc.firstname_sender_txt.text;
oFTransmit.name_sender =
_root.form_tofriends_mc.name_sender_txt.text;
oFTransmit.email_sender =
_root.form_tofriends_mc.email_sender_txt.text;
oFTransmit.firstname_receiver1 =
_root.form_tofriends_mc.firstname_receiver1_txt.text;
oFTransmit.email_receiver1 =
_root.form_tofriends_mc.email_receiver1_txt.text;
oFTransmit.firstname_receiver2 =
_root.form_tofriends_mc.firstname_receiver2_txt.text;
oFTransmit.email_receiver2 =
_root.form_tofriends_mc.email_receiver2_txt.text;
oFTransmit.firstname_receiver3 =
_root.form_tofriends_mc.firstname_receiver3_txt.text;
oFTransmit.email_receiver3 =
_root.form_tofriends_mc.email_receiver3_txt.text;
oFTransmit.send("
http://test.asp");
OR JUST OPENS MY ASP PAGE IN A POPUP WITHOUT RECEIVING DATA
getURL("javascript:popup('
http://test.asp','myPopUp',800,600)")
}

i added a trace statement:
trace(Title.text);
trace(Forename1.text);
trace(Surname1.text);
trace(Address1.text);
trace(Country1.text);
trace(Post_code1.text);
trace(Fax1.text);
trace(Home_Phone1.text);
trace(Mobile_Phone1.text);
trace(E_Mail1.text);
trace (send_lv);
which returns this message in the output window.?????
Mr
jonathan
gibbons
orchard house
east lound
haxey
doncaster
england
dn9 2lr
076 286 161
01427 752185
0872 398 161
[email protected]
onLoad=%5Btype%20Function%5D&Password=Password&Login=Login&time%5Farrival=Flight%20No%2E%2 0or%20Est%20Time%20of%20Arrival%20%2D9%2E00%20am&Port%5FOut=Pai%20Airport&Port%5Fin=Pai%20 Airport&Transfer%5FNo=false&Transfer%5FYes=true&Below%5F15=2&Under%5F3=2&Guest%5FAdult=4&S uperior%5Froom=undefined&Delux%5Fvilla=Deluxe%20Villa&Honeymoon%5FSuite=2&rooms%5Fcombo=2& departure%5Fdate=Thu%20Jun%2019%2000%3A00%3A00%20GMT%2B0700%202008&arrival%5Fdate=Mon%20Ju n%2016%2000%3A00%3A00%20GMT%2B0700%202008&Department1=Arayaburi%20Boutique%20Resort&E%5FMa il1=gibbo%5F960%40hotmail%2Ecom&Fax1=076%20286%20161&Mobile%5FPhone1=0872%20398%20161&Home %5FPhone1=01427%20752185&Post%5Fcode1=dn9%202lr&Country1=england&Address1=orchard%20house% 0Deast%20lound%0Dhaxey%0Ddoncaster&Surname1=gibbons&Forename1=jonathan&Title=Mr
i named the components as above, these are not the
corresponding var name???

Similar Messages

Send data from flash to a popup ASP page

how can I send data from a flash webpage to an ASP page which
has to open in a popup window.
I can do them both seperatly, but how to integrate those 2 in
1....
Here's my script...

I'm not sure if this will work, so you'll have to forgive me
if I'm way off here. I use php for all my server-side goodness. I
recently was doing sort of the same thing, but what I did to solve
it was this (oversimplified of course)...
variableSTRING =
"?variableA=valueONE&variableB=valueTWO";
getURL("javascript:popup('
http://test.php"+variableSTRING+"
','myPopUp',800,600)");
does that help?

When use POP3 send and receive email, the outlook always popup a windows

Hello guys,
there is another question in Exchange 2013, when i tired to the send and receive email by using POP3, the outlook always popup a windows ,the error message is "ERR Logon Failure, Unknown user name or password ". I can fully confirm that the username
and password is correct.
The Exchange confguration as below,
POP3 : 995 SSL
SMTP : 587 TLS
I'm very appreciate for guys help.
Thanks
David
Exchange Lync Sharepoint

Hi,
How did you configure the POP3 account in the outlook?
Please refer to the following article to configure it:
Configuring POP3 Email in Microsoft Outlook Using a Secure Connection (SSL)
Thanks.
Niko Cheng
TechNet Community Support

Infected, please help! "Warning! You have excessive popups. Windows may have been infected.

Hello. My computer has been incredibly slow and I have continuously been getting a pop up which states "Warning! You have excessive popups. Windows may have been infected. Please call 1-855-412-1786 for immediate support!" I have done some research and it seems like it is some type of trojan? I am a college student and really don't have the money to take my computer in, does anyone know how I can fix this? Thank you!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Flash movie in IE modal window freezes

Hi,
We have a Flash application, written in AS 2, that presents system simulation to learners. During the process we present "audio popups" using External Interface to call a JavaScript function that ultimately calls window.showModalDialog (It's for a corporate environment that requires IE). The page it opens contains a flash file. When one of these audio popups occurs on the first step of the simulation, the flash in the popup is frozen.
Is anyone aware of a scenario that could cause files in modal windows (or possibly just 2 Flash movies on the same page) to freeze up? The file loads, but doesn't play beyond frame 1 and is unresponsive if there is a button.
I can change the Flash file in the popup and the result is always the same, so it's not the file in the popup.
I've replaced the Flash file on the root page with a simple launch file that only calls the popup and it works fine.
Also replacing the modal window with a window.open seems to work as well, but right now we'd like to continue using the modal.
Possibly worth noting, if the modal window is open for too long, I get a "A script in this movie is causing Adobe Flash Player 10 to run slowly...." notice when I close the popup. Not sure if it's related.
Thanks for any help,
Jeff

Hi kp
Is this Captivate 1 or 2? There are no issues to my knowledge
with either playing the movie in IE7. I use IE7 and see movies just
fine.
My question about version stems from the fact that there are
typically more files to distribute with Captivate 2 than there are
with Captivate 1. However, this can also depend on what you have
selected when you publish. For example, in Captivate 1, you would
have three files to ship if you used the .SWF output with the Full
Screen option. There would be two HTML files and a .SWF.
With Captivate 2, assuming you haven't deviated from the
defaults, you have four files. Two .SWFs, one .HTM and a JavaScript
file.
When you said you see a "black" screen, does this mean the
screen is really black? Or was that a typo and you meant to say it
was "blank" instead. If so, you need to be aware that there is an
additional file you need to include. If you fail to copy the
JavaScript file, the page is blank. I'm thinking this is a strong
possiblity here.
Cheers... Rick

Urgent - How to deactivate the popup reminder window

I want to know how to deactivate the reminder popup window when you restart a Captivate movie.
I have an application made with Flash that load in wrapper some captivate movie. When i load a movie that i 've just loaded before, a popup reminder window with "do you want to continue from last slide..?" appears. How can I deactivate this popup? Or Is it possible to change the language text of this window?
Thank you very much for your help

I believe that is controlled by the 'self paced learning' option in the table of contents settings.
in windows, Project > Table of Contents > Settings (under the list of the TOC)

Flash vars

I'm useing Fash to write Math equation, because HTML doesn't
do it.
I have had success with flash vars, but i'm running into some
problems when I try to display and plus sign "+" and super script
for example I want to show, x squared minus 121 over 6x+66.
In HTML the top looks like this:
x2 − 121
and the bottom like this:
6x + 66
my HTML sending to flash vars looks like this:,
'flashvars',
'top=x2 −
121&bottom=6x + 66'
my AS3 is like this:
var top;
var bottom;
top = root.loaderInfo.parameters.top;
bottom = root.loaderInfo.parameters.bottom;
txtTop.htmlText = top;
txtBottom.htmlText = bottom;
and when I run it i get this on top:
x2 - 121
(the 2 is not in super script)
and this on the bottom:
6x 66
(the plus sign "+" is missing)
please tell me how to do superscript and how to send a "+"
through flash vars.
thank you.

Here between the brackets:
<script type="text/javascript">mymovie
('2'
);</script>
That way I can change the value of num on every page the
movie appears on.

Hyperlink on Crystal Report: how to popup a window without menubar?

Hyperlink on Crystal Report: how to popup a window without menubar?
Hello Experts!
I'm using VS2003 with Crystal Reports for VS2003.
I need to show a popup window clicking a hyperlink text object on my crystal report.
On the CrystalReportViewer I have set up HyperlinkTarget=_blank, and it's working fine.
But when I click on the hyperlink and shows the popup window, how can I show the popup window without menubar, toolbar, directories, etc.
Something like:
window.open('../MyPage.html?id=id001" + Cad + "',null,'menubar=no,scrollbars=yes,toolbar=no,location=no,directories=no,resizable=yes,status=yes')

Adam is correct. The closest you can get is setting the CrystalReportViewers HyperlinkTarget to _blank. It was seen as a potential security vulnerability to allow you to run scripts from a Crystal Reports. In our Enterprise product you can use a reg key called EncodeHTMLForSingleLineFieldObjects to control whether this can be turned on or off.
Unfortunately this was never ported over to our .NET CrystalReportViewer.
This is referenced in notes 1202803, 1219298, and 1219301.
https://www.sdn.sap.com/irj/sdn/businessobjects-notes
Edited by: David Hilton on Jul 16, 2008 4:17 PM

Can you open a second jsp page as popup/new window?

Hi all gurus!
I have a question regarding popups/new windows in an iview application. Instead of starting with a question let me instead describe what I want to do.
We have a jsp page that presents a search and then the search result in a table where one column is "clickable". When the user clicks a cell a server round trip retreives data specific for that cell value. This is standard functionality and already fixed so here is what differes: we want a new jsp window to open like a popup, with the data retreived from the server round trip and at the same time the first page with the table shall still be there so that you just can close the popup and click the next cell which creates a new server round trip and a new jsp popup and so on.
My solution which doesn't work yet: In application "a" I have a JavaScript for the clicked cell which opens another iview application "b" in a new window, by window.open("navurl_to_the_iview"), and that works fine.
At the same time the value of the clicked cell is written to the data bean and the bean is put in the http session (since component session does not reach between applications).
The second iview "b" retreives the bean from the http session and fills the jsp page with data.
Here is now the problem: no data is displayed and this because the iview "b" retreives the bean BEFORE iview "a" has been able to put the bean/value into the http session. How do I know this for sure? Simple, if I do a refresh of iview "b" the value is displayed.
I could do a JavaScript that recursively checks if the value in the bean is null or not but then I have to do a method that retreives the bean from the http session each time.
This could work but I wonder if this is the most simple solution. So my question for you gents and madams is: do you know of a more simple solution?
Best regards
Benny Lange
Edited by: Benny Lange on Oct 6, 2009 11:33 AM

Hi you all.
In this case the solution was to pass the id in the url to the second iview and let that iview use the id to retreive data from the backend system.
But I still think the question is interesting, if it's possible to open a second jsp window after a server round trip and still have the first one open.
All the best
Benny

DW CS4: How to play a Flash Movie in a NEW window after clicking a link or a button on a page?

Hi, using Adobe Dreamweaver CS4, I would like to have a link or a button on a webpage that when clicked will play a Flash Movie in a new window.
Using the 'Insert Panel' > Media: FLV I managed to insert the .flv file on the page, but the movie plays 'in line' instead of in a new window. So far I can't find any 'Properties' or settings to change this behaviour. E.g. like Target _blank for opening e.g. a .pdf in a new Window.
> Please help.
Thank you!

Try using one of the popular javascript methods for this. I use shadowbox and you can find examples, info and a download here: http://www.shadowbox-js.com

How can I make the background inactive when I show a popup in Windows phone 8.1..?

I have created a popup in Windows phone 8.1. But the user can click buttons in the background. Can I disable this feature of popup...ie. I want the background to be unresponsive when popup is shown.
How to achieve this....?

There are a couple ways to do this:
If you set popup.IsLightDismissed = true, when the user taps the background, the background will be unresponsive when the user taps the background. HOWEVER, tapping the background will cause the popup to disappear immediately.
When you open your popup, you can set Window.Current.Content.IsHitTestVisible = false, that should make the background untappable. However, you'll need to set .IsHitTestVisible back to true once the popup is closed, otherwise your app will be unresponsive
until the user closes and restarts it. You can subscribe to the popup.Closed event to tell when the popup is closed.
Ryken Productions

Open pdf in popup browser window

Hello
I want to show a pdf file which is stored in a blob column in the database in a popup browser window.
I'm using apex 4.1 (soon 4.2) ans an 11gR2 database.
I searched the OTN forum and found a lot of threads about this issue but I do not see a solution that works fine for me.
Most inspiration from this post:
Show PDF ....
There is an example application from Kumar:
http://apex.oracle.com/pls/apex/f?p=52018
worspace: kumar2003
username: test_user
password: test
application: 52018
Test1 is the solution I want to create.
I tried :
Content-Disposition: inline;and that works almost fine. Only the pdf is not in a popup browser window.
Patrick Wolf suggests:
<a href="your_download_link" target="_blank">PDF</a>But I do not exactly know what he means.
Any help would be appreciated.
Regards Erik

Hi,
I hope I understood your question correctly, if so my suggestion may be helpful. Otherwise I think it's nearly the same what paul writes, I only made clear my proposal in a website for you, first a photo:
and here is the link: http://www.goldschmiede-blumberg.de/pdf/adob_pdf.php.
Note 1: "Ausgabe 9" und "ein Mausklick hier genügt" are links!!
Note 2: " Um pdf-Dateien ...." Means: To read pdf files, you need the free Adobe Reader. The current version you can download from the Adobe website.
Look at it's source code.
Viel Erfolg
Hans-G.

How do you create a flash in game popup on the same frame?

How do you create a flash in game popup on the same frame?
I need to make a popup in flash on the same frame. Basiclly like you reach the frame and randomly (I know how to do random stuff) a popup might appear saying like you got a prize; and I want the stuff in the back to stay the same.
Please help me!
Thankx in advance.

Whatever frame you intend to make this movieclip appear in, you first set it to be invisible using...
popupName._visible = false; // popupName is whatever instance name you use
And for whatever random code you use to trigger it to appear you just set the _visible property to be true...
popupName._visible = true;

VirtualBox: Flash drive not visible in Windows Guest

Maybe this was better asked in a Windows forum but I'll ask here first
I have an installation of Win 7 in VirtualBox and I can check to use my USB flash drive but although in Windows there's a sound notification that a removable drive was connected I can't see it in the Explorer.
Any idea how I can access it under Windows?

Hmm. There is a thread started by yours truly for the same problem (only in x64 Arch hosts), but that was fixed by wonder back in version 4.0.8-2.
Are you also using x64 Arch as host? That thread has "other" solutions. See if those work for you. To be honest, I haven't fired up my win7 vdi in a couple of weeks so I wouldn't know if it works. But I can check tonight.
Here's the thread I was talking about: https://bbs.archlinux.org/viewtopic.php?id=121377
EDIT :: Try what wonder says below first, if you haven't already. Then if that doesn't work, try the thread that I linked.

Flash player not working ie10 windows 8 pro 32

flash player not working ie10 windows 8
Default web browser IE10 does not play flash in metro nor in desktop mode on up-to-date W8pro32 laptop
error message "you have to install flash player"
but
I cannot (re-)install latest version of flash player
error message "flash player is embedded in IE10"
I have
reset ie (in advanced options)
turned windows feature ie off (unchecked box) , restarted pc, turned windows feature ie on (checked box), restarted pc
ie10 as default web browser
disabled acticex filtering (tools)
enabled flash player (add-ons)
enabled updates to compatibility view list
Problem started after installing W8pro32 with IE10
Flash plays fine using Firefox W8pro32
Had no problems playing flash on this particular hardware using previous version of os and ie
The macromed flash folder in windows/sytem32 on this PC contains files with exactly same name/size as on other W8pro32 laptop where IE10 plays fash plays without problem
Have asked micsosoft support but not received a reply
Please advise
Thanks

flash player not working ie10 windows 8
Default web browser IE10 does not play flash in metro nor in desktop mode on up-to-date W8pro32 laptop
error message "you have to install flash player"
but
I cannot (re-)install latest version of flash player
error message "flash player is embedded in IE10"
I have
reset ie (in advanced options)
turned windows feature ie off (unchecked box) , restarted pc, turned windows feature ie on (checked box), restarted pc
ie10 as default web browser
disabled acticex filtering (tools)
enabled flash player (add-ons)
enabled updates to compatibility view list
Problem started after installing W8pro32 with IE10
Flash plays fine using Firefox W8pro32
Had no problems playing flash on this particular hardware using previous version of os and ie
The macromed flash folder in windows/sytem32 on this PC contains files with exactly same name/size as on other W8pro32 laptop where IE10 plays fash plays without problem
Have asked micsosoft support but not received a reply
Please advise
Thanks

Send flash vars to popup ASP window

Similar Messages

Maybe you are looking for