Send GR output by email to GR recipient
Hi,
The requirement is to send the GR output by email to GR recipient at item level.
We have maintained the email ID of teh Gr recipient in SU01.
I have set up the output type WE01 for the transmission medium 5 - external send.
When I trigger an output for WE01 and transmission medium 5, the output is by default sent to the GR creator.
Is there some way in which partner function of GR recipient can be added so that the email is sent to the GR recipient?
If this is not possible through normal output determication, is there soem standard workflow or a user exit available to fulfil this requirement?
Please help.
Thanks!
PM
Hi Sridhar,
The GR recipient is a standard SAP field. It can be seen in the material document (where tab in MIGO).
It gets acrried over from the PM oredr or the purchase requisition - Account assignment tab.
Parameter ID: NGR
Field: MSEG-WEMPF
Thanks!
PM
Similar Messages
-
Reg : Sending Script output to email
Hi,
I need to send script output to email.I have written the code for this functionality.
Functional guy has created output type ,but that output type is red in clor and when I click process log " it says Parameter DEVICE= is invalid "
Is there anything to be done from abap point for this error.
Actually I used these 2 fun.modules
DATA: LVF_DEVICE LIKE ITCPP-TDDEVICE.
DATA: LVS_ITCPO TYPE ITCPO,
LVF_DIALOG(1) TYPE C VALUE ' ',
LVS_RECIPIENT LIKE SWOTOBJID,
LVS_SENDER LIKE SWOTOBJID,
LVS_SNAST TYPE SNAST,
LVF_PROGRAM LIKE SY-REPID,
LVS_COMM_TYPE TYPE AD_COMM,
LVS_COMM_VALUES TYPE SZADR_COMM_VALUES.
DATA:
W_DEPT LIKE KNVK-ABTNR, "Department
W_PRSNR LIKE KNVK-PRSNR. "Person number
reset return code
RETCODE = 0.
IF NOT NAST-TCODE IS INITIAL AND NAST-NACHA EQ '5'.
SELECT SINGLE * FROM USR21 WHERE BNAME = SY-UNAME.
CALL FUNCTION 'ADDR_GET_NEXT_COMM_TYPE'
EXPORTING
strategy = nast-tcode
address_number = Kna1-adrnr
IMPORTING
comm_type = lvs_comm_type
comm_values = lvs_comm_values
TABLES
STRATEGY_TABLE =
EXCEPTIONS
address_not_exist = 1
person_not_exist = 2
no_comm_type_found = 3
internal_error = 4
parameter_error = 5
OTHERS = 6.
convert communication data
Always INT
LVS_COMM_TYPE = 'INT'.
clear LVS_COMM_VALUES-ADSMTP-SMTP_ADDR.
Get Contact persons number from KNVK
SELECT SINGLE * FROM KNVK WHERE KUNNR EQ NAST-PARNR
AND ABTNR EQ W_DEPT.
Get it from ADR6 table always
Select single * from adr6 where addrnumber = kna1-adrnr
AND PERSNUMBER = KNVK-PRSNR.
IF SY-SUBRC EQ 0 AND adr6-Smtp_addr NE ' '.
LVS_COMM_VALUES-ADSMTP-SMTP_ADDR = adr6-Smtp_addr.
ENDIF.
ENDIF.
MOVE-CORRESPONDING nast TO LVS_SNAST .
MOVE sy-repid TO LVF_PROGRAM.
CALL FUNCTION 'CONVERT_COMM_TYPE_DATA'
EXPORTING
pi_comm_type = lvs_comm_type
pi_comm_values = lvs_comm_values
pi_country = kna1-land1
pi_repid = LVF_PROGRAM
pi_snast = LVS_SNAST
IMPORTING
pe_itcpo = lvs_itcpo
pe_device = lvf_device
pe_mail_recipient = lvs_recipient
pe_mail_sender = lvs_sender
EXCEPTIONS
comm_type_not_supported = 1
recipient_creation_failed = 2
sender_creation_failed = 3
OTHERS = 4.
fill structure itcpo
ITCPO = LVS_ITCPO.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX = TOA_DARA
ARCHIVE_PARAMS = ARC_PARAMS
DEVICE = LVF_DEVICE
DIALOG = ' '
FORM = TNAPR-FONAM
LANGUAGE = NAST-SPRAS
OPTIONS = LVS_ITCPO
MAIL_SENDER = LVS_SENDER
MAIL_RECIPIENT = LVS_RECIPIENT
MAIL_APPL_OBJECT = ' '
RAW_DATA_INTERFACE = '*'
IMPORTING
LANGUAGE =
NEW_ARCHIVE_PARAMS =
RESULT =
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
MAIL_OPTIONS = 6
ARCHIVE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC NE 0.
CASE SY-SUBRC.
WHEN 7.
RETCODE = SY-SUBRC.
SYST-MSGID = 'VN'.
SYST-MSGNO = '096'.
SYST-MSGTY = 'E'.
SYST-MSGV1 = NAST-KSCHL.
SYST-MSGV2 = NAST-KAPPL.
PERFORM PROTOCOL_UPDATE.
WHEN OTHERS.
RETCODE = SY-SUBRC.
PERFORM PROTOCOL_UPDATE.
ENDCASE.
ENDIF.
and one more query is :
I want to know weather
"Are there any settings need to be done by BASIS people."
If Anyone has any idea plz reply.Hi
Use the below peace of code,I was used to send sales order confirmation script output as email.
Change History
Programmer Date Change Request Description
FKHURRAM 9/16/02 DU1K920151 Upgrade changes.
Use ADRC for Address Data
Print of an order confirmation by SAPscript
REPORT rvador01 LINE-COUNT 100 MESSAGE-ID vn.
TABLES: komk, "Communicationarea for conditions
komp, "Communicationarea for conditions
komvd, "Communicationarea for conditions
vbco3, "Communicationarea for view
vbdka, "Headerview
vbdpa, "Itemview
vbdpau, "Subitemnumbers
conf_out, "Configuration data
sadr, "Addresses
tvag, "Reason for rejection
vedka, "Servicecontract head data
vedpa, "Servicecontract position data
vedkn, "Servicecontract head notice data
vedpn, "Servicecontract pos. notice data
vbpa, "Sales Document: Partner
kna1, "General Data in Customer Master
riserls, "Serialnumbers
komser, "Serialnumbers for print
tvbur, "Sales office
tvko, "Sales organisation
adrs, "Communicationarea for Address
fpltdr. "billing schedules
INCLUDE yzrvadtabl.
*INCLUDE RVADTABL.
INCLUDE yzrvdirekt.
*INCLUDE RVDIREKT.
INCLUDE yzvedadata.
*INCLUDE VEDADATA.
DATA: retcode LIKE sy-subrc. "Returncode
DATA: repeat(1) TYPE c.
DATA: xscreen(1) TYPE c. "Output on printer or screen
DATA: BEGIN OF steu, "Controldata for output
vdkex(1) TYPE c,
vdpex(1) TYPE c,
kbkex(1) TYPE c,
kbpex(1) TYPE c,
END OF steu.
DATA: BEGIN OF tvbdpa OCCURS 0. "Internal table for items
INCLUDE STRUCTURE vbdpa.
DATA: END OF tvbdpa.
DATA: BEGIN OF tkomv OCCURS 50.
INCLUDE STRUCTURE komv.
DATA: END OF tkomv.
DATA: BEGIN OF tkomvd OCCURS 50.
INCLUDE STRUCTURE komvd.
DATA: END OF tkomvd.
DATA: BEGIN OF tvbdpau OCCURS 5.
INCLUDE STRUCTURE vbdpau.
DATA: END OF tvbdpau.
DATA: BEGIN OF tkomcon OCCURS 50.
INCLUDE STRUCTURE conf_out.
DATA: END OF tkomcon.
DATA: BEGIN OF tkomservh OCCURS 1.
INCLUDE STRUCTURE vedka.
DATA: END OF tkomservh.
DATA: BEGIN OF tkomservp OCCURS 5.
INCLUDE STRUCTURE vedpa.
DATA: END OF tkomservp.
DATA: BEGIN OF tkomservhn OCCURS 5.
INCLUDE STRUCTURE vedkn.
DATA: END OF tkomservhn.
DATA: BEGIN OF tkomservpn OCCURS 5.
INCLUDE STRUCTURE vedpn.
DATA: END OF tkomservpn.
DATA: BEGIN OF tkomser OCCURS 5.
INCLUDE STRUCTURE riserls.
DATA: END OF tkomser.
DATA: BEGIN OF tkomser_print OCCURS 5.
INCLUDE STRUCTURE komser.
DATA: END OF tkomser_print.
DATA: BEGIN OF tfpltdr OCCURS 5.
INCLUDE STRUCTURE fpltdr.
DATA: END OF tfpltdr.
DATA: pr_kappl(01) TYPE c VALUE 'V'. "Application for pricing
DATA: BEGIN OF char_val OCCURS 0,
atnam LIKE cabn-atnam,
atwrt LIKE ausp-atwrt,
END OF char_val.
FORM entry USING return_code us_screen.
CLEAR retcode.
xscreen = us_screen.
PERFORM processing.
IF retcode NE 0.
return_code = 1.
ELSE.
return_code = 0.
ENDIF.
ENDFORM. "ENTRY
FORM PROCESSING *
FORM processing.
PERFORM get_data.
CHECK retcode = 0.
PERFORM form_open USING xscreen vbdka-land1.
CHECK retcode = 0.
PERFORM logo_selection.
PERFORM form_title_print.
CHECK retcode = 0.
PERFORM write_header_info.
PERFORM validity_print.
CHECK retcode = 0.
PERFORM header_data_print.
CHECK retcode = 0.
PERFORM header_serv_print.
CHECK retcode = 0.
PERFORM header_notice_print.
CHECK retcode = 0.
PERFORM header_inter_print.
CHECK retcode = 0.
PERFORM header_text_print.
CHECK retcode = 0.
PERFORM item_print.
CHECK retcode = 0.
PERFORM end_print.
CHECK retcode = 0.
PERFORM form_close.
CHECK retcode = 0.
*********************changes on 12/04/2007****************
TABLES: tsp01.
TYPES: BEGIN OF t_spool,
rqident TYPE tsp01-rqident,
END OF t_spool.
DATA: i_spool TYPE STANDARD TABLE OF t_spool,
wa_spool TYPE t_spool.
SELECT rqident FROM tsp01
INTO TABLE i_spool
WHERE rqowner = sy-uname.
SORT i_spool DESCENDING BY rqident.
LOOP AT i_spool INTO wa_spool.
ENDLOOP.
data: l_rqident type tsp01-rqident.
SELECT SINGLE rqident FROM tsp01 INTO l_rqident
WHERE rqowner = sy-uname.
DATA: l_spoolno LIKE tsp01-rqident VALUE '0000024884'.
TYPES: l_ty_tab_pdf TYPE tline OCCURS 0.
DATA: l_pdf TYPE l_ty_tab_pdf,
l_spool TYPE tsp01-rqident.
Type for binary attachment table.
TYPES: l_ty_tab_objbin TYPE solisti1 OCCURS 0.
DATA: l_objbin TYPE l_ty_tab_objbin.
l_spool = l_spoolno.
l_spool = l_rqident.
l_spool = wa_spool-rqident.
**/ Call the standard function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF' "#EC ARGCHECKED
EXPORTING
src_spoolid = l_spool
no_dialog = ' '
DST_DEVICE =
PDF_DESTINATION =
IMPORTING
pdf_bytecount = numbytes
pdf_spoolid = pdfspoolid
LIST_PAGECOUNT =
btc_jobname = jobname
btc_jobcount = jobcount
TABLES
pdf = l_pdf
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
IF sy-subrc <> 0.
WRITE: / 'error', sy-subrc.
ENDIF.
**/ Convert the PDF format to the table type required for the
*attachment.
CALL FUNCTION 'QCE1_CONVERT'
TABLES
t_source_tab = l_pdf
t_target_tab = l_objbin
EXCEPTIONS
convert_not_possible = 1
OTHERS = 2.
IF sy-subrc <> 0.
WRITE: / 'error', sy-subrc.
ENDIF.
TABLES : soli.
TABLES : zpsdsalrep.
DATA: v_email TYPE soli-line.
DATA: v_email1 TYPE soli-line.
DATA: l_adrnr LIKE kna1-adrnr.
DATA: l_objky TYPE nast-objky.
DATA: l_zzterrmg TYPE zpsdsalrep-zzterrmg.
DATA: l_zsupervisor TYPE zpsdsalrep-zsupervisor.
DATA: l_kunnr TYPE kna1-kunnr.
DATA: l_kunnr1 TYPE vbak-kunnr.
SELECT SINGLE kunnr FROM vbak INTO l_kunnr1
WHERE vbeln = nast-objky.
SELECT SINGLE adrnr FROM kna1 INTO l_adrnr
WHERE kunnr = l_kunnr1.
CHECK sy-subrc IS INITIAL.
SELECT SINGLE smtp_addr FROM adr6 INTO v_email
WHERE addrnumber = l_adrnr.
SELECT SINGLE zzterrmg FROM zpsdsalrep INTO l_zzterrmg
WHERE zzsalesrep = l_kunnr1.
SELECT SINGLE zsupervisor FROM zpsdsalrep INTO l_zsupervisor
WHERE zzterrmg = l_zzterrmg.
SELECT SINGLE kunnr FROM kna1 INTO l_kunnr
WHERE sortl = l_zsupervisor.
SELECT SINGLE adrnr FROM kna1 INTO l_adrnr
WHERE kunnr = l_kunnr.
CHECK sy-subrc IS INITIAL.
SELECT SINGLE smtp_addr FROM adr6 INTO v_email1
WHERE addrnumber = l_adrnr.
DATA: l_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
DATA: l_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE.
DATA: l_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
DATA: l_doc_chng LIKE sodocchgi1.
DATA: l_objhead LIKE solisti1 OCCURS 0 WITH HEADER LINE.
DATA: l_tab_lines LIKE sy-tabix.
CONSTANTS: k_true TYPE boolean_flg VALUE 'X'.
DATA: l_mail TYPE somlreci1-receiver.
DATA: l_mail1 TYPE somlreci1-receiver.
DATA: k_mail2 TYPE somlreci1-receiver.
DATA: k_mail TYPE somlreci1-receiver.
l_mail = v_email.
l_mail1 = v_email1.
k_mail2 = text-006.
k_mail = text-007.
Creation of the document to be sent
File Name
l_doc_chng-obj_name = 'SENDFILE'.
Mail Subject
l_doc_chng-obj_descr = text-001.
Completing the recipient list
l_reclist-receiver = l_mail.
l_reclist-rec_type = 'U'.
APPEND l_reclist.
l_reclist-receiver = l_mail1.
l_reclist-rec_type = 'U'.
APPEND l_reclist.
l_reclist-receiver = k_mail.
l_reclist-rec_type = 'U'.
APPEND l_reclist.
l_reclist-receiver = k_mail2.
l_reclist-rec_type = 'U'.
APPEND l_reclist.
Mail Contents
l_objtxt = text-002.
APPEND l_objtxt.
CLEAR l_objtxt. " put in a blank line
APPEND l_objtxt.
l_objtxt = text-003.
APPEND l_objtxt.
l_objtxt = text-004 .
APPEND l_objtxt.
Calculate email size in bytes
DESCRIBE TABLE l_objtxt LINES l_tab_lines.
READ TABLE l_objtxt INDEX l_tab_lines.
l_doc_chng-doc_size = ( l_tab_lines - 1 ) * 255 + STRLEN( l_objtxt ).
Creation of the entry for the compressed document
for the email text
CLEAR l_objpack-transf_bin.
l_objpack-head_start = 1.
l_objpack-head_num = 0.
l_objpack-body_start = 1.
l_objpack-body_num = l_tab_lines.
l_objpack-doc_type = 'RAW'.
APPEND l_objpack.
Creation of the document attachment
(Assume that the data in OBJBIN is in BMP format)
DESCRIBE TABLE l_objbin LINES l_tab_lines.
l_objhead = text-001 .
APPEND l_objhead.
CLEAR l_objpack.
**/ Creation of the entry for the compressed/attached document
l_objpack-transf_bin = k_true.
l_objpack-head_start = 1.
l_objpack-head_num = 1.
l_objpack-body_start = 1.
l_objpack-body_num = l_tab_lines.
l_objpack-doc_type = 'PDF'.
l_objpack-obj_name = text-005.
l_objpack-obj_descr = text-001.
l_objpack-doc_size = l_tab_lines * 255.
APPEND l_objpack. "/ .
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1' "/ .
EXPORTING
document_data = l_doc_chng
put_in_outbox = 'X'
TABLES
packing_list = l_objpack
object_header = l_objhead
contents_bin = l_objbin
contents_txt = l_objtxt
receivers = l_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
IF sy-subrc <> 0.
WRITE: / 'unsuccessful', sy-subrc.
ELSE.
WRITE: / 'successful'.
ENDIF.
**/Take_note it is a requirement to do a commit work for the
email to go into transaction SOST.
COMMIT WORK. "/Take_note .
ENDFORM. "PROCESSING
S U B R O U T I N E S *
FORM ALTERNATIVE_ITEM *
A text is printed, if the item is an alternative item. *
FORM alternative_item.
CHECK vbdpa-grpos CN '0'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ALTERNATIVE_ITEM'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "ALTERNATIVE_ITEM
FORM CHECK_REPEAT *
A text is printed, if it is a repeat print for the document. *
FORM check_repeat.
CLEAR repeat.
SELECT * INTO *nast FROM nast WHERE kappl = nast-kappl
AND objky = nast-objky
AND kschl = nast-kschl
AND spras = nast-spras
AND parnr = nast-parnr
AND parvw = nast-parvw
AND nacha BETWEEN '1' AND '4'.
CHECK *nast-vstat = '1'.
repeat = 'X'.
EXIT.
ENDSELECT.
ENDFORM. "CHECK_REPEAT
FORM DELIVERY_DATE *
If the delivery date in the item is different to the header *
date and there are no scheduled quantities, the delivery date *
is printed in the item block. *
FORM delivery_date.
IF vbdka-lfdat = space AND
vbdpa-lfdat NE space AND
vbdpa-etenr_da = space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_DELIVERY_DATE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "DELIVERY_DATE
FORM DIFFERENT_CONSIGNEE *
If the consignee in the item is different to the header con- *
signee, it is printed by this routine. *
FORM different_consignee.
CHECK vbdka-name1_we NE vbdpa-name1_we
OR vbdka-name2_we NE vbdpa-name2_we
OR vbdka-name3_we NE vbdpa-name3_we
OR vbdka-name4_we NE vbdpa-name4_we.
CHECK vbdpa-name1_we NE space
OR vbdpa-name2_we NE space
OR vbdpa-name3_we NE space
OR vbdpa-name4_we NE space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_CONSIGNEE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "DIFFERENT_CONSIGNEE
FORM DIFFERENT_REFERENCE_NO *
If the reference number in the item is different to the header*
reference number, it is printed by this routine. *
FORM different_reference_no.
CHECK vbdpa-vbeln_vang NE vbdka-vbeln_vang
OR vbdpa-vbtyp_vang NE vbdka-vbtyp_vang.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_REFERENCE_NO'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "DIFFERENT_REFERENCE_NO
FORM DIFFERENT_TERMS *
If the terms in the item are different to the header terms, *
they are printed by this routine. *
FORM different_terms.
DATA: us_vposn LIKE vedpa-vposn.
DATA: us_text(1) TYPE c. "Flag for Noticetext was printed
IF vbdpa-zterm NE vbdka-zterm AND
vbdpa-zterm NE space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_PAYMENT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
IF vbdpa-inco1 NE space.
IF vbdpa-inco1 NE vbdka-inco1 OR
vbdpa-inco2 NE vbdka-inco2.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_DELIVERY'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDIF.
Print different validity-data for the position
READ TABLE tkomservp WITH KEY vbdpa-posnr.
IF sy-subrc EQ 0.
vedpa = tkomservp.
IF vedpa-vbegdat NE space AND
vedpa-venddat NE space AND
NOT vedpa-vbegdat IS INITIAL AND
NOT vedpa-venddat IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_SERV1'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSEIF vedpa-vbegdat NE space AND
NOT vedpa-vbegdat IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_SERV2'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_SERV3'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDIF.
Notice-rules for the positions.
MOVE vbdpa-posnr TO us_vposn.
CLEAR us_text.
LOOP AT tkomservpn WHERE vposn = us_vposn.
vedpn = tkomservpn.
IF us_text IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_NOTTXT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
us_text = charx.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_NOTICE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDLOOP.
IF NOT us_text IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'EMPTY_LINE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "DIFFERENT_TERMS
FORM END_PRINT *
FORM end_print.
PERFORM get_header_prices.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'PROTECT'.
PERFORM header_price_print.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'END_VALUES'.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'ENDPROTECT'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'SUPPLEMENT_TEXT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "END_PRINT
FORM FORM_CLOSE *
End of printing the form *
FORM form_close.
CALL FUNCTION 'CLOSE_FORM'
EXCEPTIONS
OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
retcode = 1.
ENDIF.
SET COUNTRY space.
ENDFORM. "FORM_CLOSE
FORM FORM_OPEN *
Start of printing the form *
--> US_SCREEN Output on screen *
' ' = printer *
'X' = screen *
--> US_COUNTRY County for telecommunication and SET COUNTRY *
FORM form_open USING us_screen us_country.
INCLUDE yzrvadopfo.
INCLUDE RVADOPFO.
ENDFORM. "FORM_OPEN
FORM FORM_TITLE_PRINT *
Printing of the form title depending of the field VBTYP *
FORM form_title_print.
CASE vbdka-vbtyp.
WHEN 'A'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_A'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'B'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_B'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'C'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_C'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'E'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_E'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'F'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_F'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'G'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_F'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'H'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_H'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'K'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_K'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'L'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_L'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN OTHERS.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_OTHERS'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDCASE.
IF repeat NE space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'REPEAT'
window = 'REPEAT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "FORM_TITLE_PRINT
FORM GET_DATA *
General provision of data for the form *
FORM get_data.
DATA: us_veda_vbeln LIKE veda-vbeln.
DATA: us_veda_posnr_low LIKE veda-vposn.
CALL FUNCTION 'RV_PRICE_PRINT_REFRESH'
TABLES
tkomv = tkomv.
CLEAR komk.
CLEAR komp.
vbco3-mandt = sy-mandt.
vbco3-spras = nast-spras.
vbco3-vbeln = nast-objky.
vbco3-kunde = nast-parnr.
vbco3-parvw = nast-parvw.
CALL FUNCTION 'RV_DOCUMENT_PRINT_VIEW'
EXPORTING
comwa = vbco3
IMPORTING
kopf = vbdka
TABLES
pos = tvbdpa.
Fetch servicecontract-data and notice-data for head and position.
us_veda_vbeln = vbdka-vbeln.
us_veda_posnr_low = posnr_low.
CALL FUNCTION 'SD_VEDA_GET_PRINT_DATA'
EXPORTING
i_document_number = us_veda_vbeln
i_language = sy-langu
i_posnr_low = us_veda_posnr_low
TABLES
print_data_pos = tkomservp
print_data_head = tkomservh
print_notice_pos = tkomservpn
print_notice_head = tkomservhn.
PERFORM get_controll_data.
PERFORM sender.
PERFORM check_repeat.
PERFORM tvbdpau_create.
ENDFORM. "GET_DATA
FORM GET_ITEM_BILLING_SCHEDULES *
In this routine the billing schedules are fetched from the *
database. *
FORM get_item_billing_schedules.
REFRESH tfpltdr.
CHECK NOT vbdpa-fplnr IS INITIAL.
CALL FUNCTION 'BILLING_SCHED_PRINTVIEW_READ'
EXPORTING
i_fplnr = vbdpa-fplnr
i_language = nast-spras
TABLES
zfpltdr = tfpltdr.
ENDFORM. "GET_ITEM_BILLING_SCHEDULES
*& Form ITEM_BILLING_SCHEDULES_PRINT
This routine prints the billing shedules of a salesdocument *
position. *
FORM item_billing_schedules_print.
DATA: first_line(1) TYPE c.
first_line = charx.
LOOP AT tfpltdr.
fpltdr = tfpltdr.
Output of the following printlines
IF NOT fpltdr-perio IS INITIAL.
periodische Fakturen
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_PERIODIC'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
bei periodischen nur eine Zeile
EXIT.
ELSEIF fpltdr-fareg CA '14'.
prozentuale Teilfakturierung
IF NOT first_line IS INITIAL.
CLEAR first_line.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_PERCENT_HEADER'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_PERCENT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ELSEIF fpltdr-fareg CA '235'.
wertmäßige Teilfakturierung
IF NOT first_line IS INITIAL.
CLEAR first_line.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_VALUE_HEADER'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_VALUE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ELSEIF fpltdr-fareg CA '3'.
Schlußrechnung
ENDIF.
ENDLOOP.
ENDFORM. "ITEM_BILLING_SCHEDULES_PRINT
*eject
FORM GET_ITEM_CHARACTERISTICS *
In this routine the configuration data item is fetched from *
the database. *
FORM get_item_characteristics.
REFRESH tkomcon.
CHECK NOT vbdpa-cuobj IS INITIAL.
CALL FUNCTION 'CUD0_GET_CONFIGURATION' "#EC EXISTS
EXPORTING
instance = vbdpa-cuobj
language = nast-spras
TABLES
configuration = tkomcon
EXCEPTIONS
OTHERS = 4.
ENDFORM. "GET_ITEM_CHARACTERISTICS
FORM GET_ITEM_PRICES *
In this routine the price data for the item is fetched from *
the database. *
FORM get_item_prices.
CLEAR: komp,
tkomv.
IF komk-knumv NE vbdka-knumv.
CLEAR komk.
komk-mandt = sy-mandt.
komk-kalsm = vbdka-kalsm.
komk-kappl = pr_kappl.
komk-waerk = vbdka-waerk.
komk-knumv = vbdka-knumv.
komk-vbtyp = vbdka-vbtyp.
ENDIF.
komp-kposn = vbdpa-posnr.
CALL FUNCTION 'RV_PRICE_PRINT_ITEM'
EXPORTING
comm_head_i = komk
comm_item_i = komp
language = nast-spras
IMPORTING
comm_head_e = komk
comm_item_e = komp
TABLES
tkomv = tkomv
tkomvd = tkomvd.
ENDFORM. "GET_ITEM_PRICES
FORM GET_HEADER_PRICES *
In this routine the price data for the header is fetched from *
the database. *
FORM get_header_prices.
CALL FUNCTION 'RV_PRICE_PRINT_HEAD'
EXPORTING
comm_head_i = komk
language = nast-spras
IMPORTING
comm_head_e = komk
TABLES
tkomv = tkomv
tkomvd = tkomvd.
ENDFORM. "GET_HEADER_PRICES
*& Form HEADER_DATA_PRINT
Printing of header data like terms, weights .... *
FORM header_data_print.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'HEADER_DATA'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. " HEADER_DATA_PRINT
FORM HEADER_PRICE_PRINT *
Printout of the header prices *
FORM header_price_print.
LOOP AT tkomvd.
AT FIRST.
IF komk-supos NE 0.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_SUM'.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'UNDER_LINE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDAT.
komvd = tkomvd.
IF komvd-koaid = 'D'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TAX_LINE'.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'SUM_LINE'.
ENDIF.
ENDLOOP.
DESCRIBE TABLE tkomvd LINES sy-tfill.
IF sy-tfill = 0.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'UNDER_LINE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "HEADER_PRICE_PRINT
FORM HEADER_TEXT_PRINT *
Printout of the headertexts *
FORM header_text_print.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'HEADER_TEXT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "HEADER_TEXT_PRINT
FORM ITEM_CHARACERISTICS_PRINT *
Printout of the item characteristics -> configuration *
FORM item_characteristics_print.
LOOP AT tkomcon.
conf_out = tkomcon.
IF sy-tabix = 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE_CONFIGURATION_HEADER'
EXCEPTIONS
OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPOR -
How to send smartform output through email
Hi,
I want to send smartform output through email.....
can u give me sample program to send it through email......
Regards,
Jenifer
MOderator Message: Basic and Frequently asked question. Please search before posting.
Edited by: kishan P on Nov 26, 2010 11:11 AMHi Jenifer,
There are many threads available on SDN.
Just have a look at this thread
<<link removed by moderator>>
Kindly search before you post.
Regard
Abhii
Moderator Message: You have been warned many times against point-hunting. Continuing ignoring of the Moderator warnings will lead to account deletion. Consider this your last warning
Edited by: kishan P on Nov 26, 2010 11:09 AM -
To send smartform output through email and fax
Hi,
I need to send smartform output through email if the email address is present else if the email address is present then it has to be sent through fax.If both the email address and fax are present,then it has to send an email.
Now the issue is I am able to send the email and I am getting the message as 'Output was successfully issued'.But the entry corresponding to this is not shown in SOST transaction.
Can anyone tell me what would be the reason for this?HI,
Try to look in transaction SCOT
Regards,
Egle -
How To Send ALV Output By Email.
Hi !
I wanted to ask how to send ALV output of report by email.
I know that i have to use the fms :
1. 'WWW_HTML_FROM_LISTOBJECT' - in order to convert the table to HTML.
2. 'SO_NEW_DOCUMENT_ATT_SEND_API1' - in order to send the HTML file.
My problem is how to convert the ALV screen output to the apropriate table parameter of the function 'WWW_HTML_FROM_LISTOBJECT' to listobject type ?
thanks
mosheHi look at the following program.
*& Report ZSM17_EMAIL1
REPORT zsm17_email.
tables : mara.
data: begin of it_mara occurs 0,
matnr like mara-matnr,
ernam like mara-ernam,
mtart like mara-mtart,
matkl like mara-matkl,
end of it_mara.
data: begin of it_final occurs 0,
v_string(255),
end of it_final.
*DATA: objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 5 WITH HEADER LINE.
DATA: objpack LIKE sopcklsti1 OCCURS 0 with header line,
objhead LIKE solisti1 OCCURS 0 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
data: wa_objbin like line of objbin.
DATA: doc_chng LIKE sodocchgi1.
DATA: tab_lines LIKE sy-tabix.
select-options s_matnr for mara-matnr.
*--- Selecting data from mara
select matnr
ernam
mtart
matkl
into table it_mara
from mara
where matnr in s_matnr.
if sy-subrc ne 0.
write:/ 'no data found'.
exit.
else.
loop at it_mara.
concatenate it_mara-matnr
it_mara-ernam
it_mara-mtart
it_mara-matkl
into it_final-v_string separated by '~'.
append it_final.
clear it_final.
endloop.
endif.
Creating the document to be sent
doc_chng-obj_name = 'TEST'. "name of the document
title of document or subject
doc_chng-obj_descr = 'Test Email program'.
body of the mail
objtxt = 'A test report'.
APPEND objtxt.
objtxt = 'is enclosed as an attachment.'.
APPEND objtxt.
*clear objtxt.
DESCRIBE TABLE objtxt LINES tab_lines.
Size of SAPoffice Document (for API1)
doc_chng-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
Creating the entry for the compressed attachment
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'RAW'.
*objpack-obj_name = 'ATTACHMENT'.
*objpack-obj_descr = 'Test Email Program'.
*objpack-doc_size = tab_lines * 255.
APPEND objpack..
*--- Populating the records in the attachment
data: w_str(255) TYPE c.
loop at it_final into wa_objbin.
append wa_objbin to objbin.
append objbin.
clear wa_objbin.
endloop.
DESCRIBE TABLE objbin LINES tab_lines.
tab_lines = tab_lines + 1.
objhead = 'test_report.txt'.
append objhead.
Creating the entry for the compressed attachment
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 1.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'txt'.
objpack-obj_name = 'txt'.
objpack-obj_descr = 'Test Email Program'.
objpack-doc_size = tab_lines * 255.
APPEND objpack..
*write:/ 'object text', objtxt.
Entering names in the distribution list
reclist-receiver = '[email protected]'.
reclist-rec_type = 'U'.
APPEND reclist.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
CASE sy-subrc.
WHEN 0.
WRITE: / 'Result of the send process:'.
LOOP AT reclist.
WRITE: reclist-receiver(48), ':'.
IF reclist-retrn_code = 0.
WRITE 'sent successfully'.
ELSE.
WRITE 'not sent'.
ENDIF.
ENDLOOP.
loop at objbin.
write: objbin-line.
endloop.
WHEN 1.
WRITE: / 'no authorization to send to the specified number of' .
"'recipients!'.
WHEN 2.
WRITE: / 'document could not be sent to any of the recipients!'.
WHEN 4.
WRITE: / 'no authorization to send !'.
WHEN OTHERS.
WRITE: / 'error occurred during sending !'.
ENDCASE. -
Send Report output as Email attachment (PDF)
Hi Experts,
i am trying to send the contents of an internal table from my report as email using PDF attachment. I have coded the logic and i get the attachment in the email. When i try to open the attachement, i cannot open it.
The message i get is "_Adobe reader could not open the attachment "attach.pdf" because it is either not a supported file type or the file has been damaged(for example, it was sent as an email attachment and wasn't correctly decoded )._
Not sure where i went wrong.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM. "send_file_as_email_attachmentHello RnB,
You can check the mentioned link for the same:
[Simple Program to generate PDF from ABAP List Output.|http://www.abapmadeeasy.com/2011/02/sap-abap-simple-program-to-generate-pdf.html]
Regards,
Uttam Agrawal -
Sending reports output to email
Hi ,
I would like to send output of a report to email insted of printer. Are there any setting to be done. We are running on 11i.
Thanks
KiranPlease see the user manual.
Oracle Alert User's Guide
http://download.oracle.com/docs/cd/B25516_18/current/acrobat/115alrug.pdf
Also, see old threads which discuss the same topic -- http://forums.oracle.com/forums/search.jspa?threadID=&q=Send+AND+E-mail+AND+Alert&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Error when sending PO output to email
Hi every body,
IF I send the PO output to an email through
ME22n->messages:by giving output type dispatch time,communication strategy..And saving that document it showing <b>Green</b> status.
If I check the for that PO message status in SCOT,
it is giving error msg like
<b>"Message could not send due to RFC error"</b>
can any body tell me what kind of problem it is ?
and how to rectify this?
Thanks in advance.Check with your basis folks if internet node is correctly setup in SCOT.
Try sending an internet mail from sap office ( Transaction SBWP ) . If this does not go then problem not with PO program but with internet node setup and you will have to ask basis folks to setup this correctly before you can send mails.
Cheers.
Sanjay -
Send report output via email as zipped attachment
Is it possible for the report output to be zipped before being attached to an email when running on a windows reports_server? On unix we theoretically have the ability to modify the mail.sh shell script that performs the mail operation for reports.
Hi Richard
This is a Reports 9i solution.
You may create a batch file that runs the report, compresses the file and invokes, say, a Java application that mails the given .zip file.
More "advanced" options would be:
You may create a pluggable destination that captures report output. Next, your code does the compresses the output file and mails it.
A simpler solution would be to run two reports. First, that creates the reports output file. In its AFTER_REPORT trigger, call Java method (thru. Java Importer), that picks up the output file and compresses it. Second, that uses XML distribution feature of Reports 9i and mails the .zip file as a file attachment using appropriate construct.
Regard
Sripathy -
Why are my text messages that i am sending going thru as emails now and recipient does not receive?
I recently synced my I phone to install the recent upgrade. Nwhen I send a group text message, that I did previously with no problems, now some of my recipients do not receive. They are telling me that it looks like I am sending them an email.....????? I'm totally lost. I changed nothing on my phone other than doing the upgrade. Any advice???
Thank you. I think I am on to something. Went thru with your instructions and the receive at is my email address......my phone number is in light gray and says error. I cannot open it to change it.
-
Automatic scheduling of report and send the output to user via email
Good Morning,
Please i need to scheduled report and send the output via email in Discoverer . Please can someone assist in how to achieve this ?Hi,
You cannot schedule and email a Discoverer report using standard Discoverer scheduling. You have to use a third party scheduler and Discoverer Desktop running on a windows PC.
This presentation has some more details on how to do this.
Rod West -
Hi All,
I need to send report output as email text. is anybody has done this sort of work or any function module for this.
Please help if anyone knows it.
Cheers,
LokeshHi
Check the code for similar requirement I was faced earlier.
Type for binary attachment table.
types: l_ty_tab_objbin type solisti1 occurs 0.
data: l_objbin type l_ty_tab_objbin.
Tables to hold PDF data
data: t_doctab type docs occurs 0,
t_line type tline occurs 0.
tables : soli. "SAPoffice: line, length 255
tables : zpsdsalrep. "ZPSDSALREP
data: l_email type soli-line.
data: l_email1 type soli-line.
data: l_adrnr like kna1-adrnr.
data: l_objky type nast-objky.
data: l_zzterrmg type zpsdsalrep-zzterrmg.
data: l_zsupervisor type zpsdsalrep-zsupervisor.
data: l_kunnr type kna1-kunnr.
data: l_kunnr1 type vbak-kunnr.
data: l_reclist like somlreci1 occurs 0 with header line.
data: l_objtxt like solisti1 occurs 0 with header line.
data: l_objpack like sopcklsti1 occurs 0 with header line.
data: l_doc_chng like sodocchgi1.
data: l_objhead like solisti1 occurs 0 with header line.
data: l_tab_lines like sy-tabix.
constants: k_true type boolean_flg value 'X'.
data: l_mail type somlreci1-receiver.
data: l_mail1 type somlreci1-receiver.
data:
l_l_mail2 TYPE somlreci1-receiver.
l_l_mail type somlreci1-receiver.
data: l_zzsalesrep type zpsdsalrep-zzsalesrep.
data: l_recipents type somlreci1-receiver.
constants: k_x(1) type c value 'X',
k_u(1) type c value 'U',
k_raw(3) type c value 'RAW'.
call function 'CONVERT_OTF_2_PDF'
EXPORTING
USE_OTF_MC_CMD = 'X'
ARCHIVE_INDEX =
IMPORTING
BIN_FILESIZE =
tables
otf = t_otfdata
doctab_archive = t_doctab
lines = t_line
exceptions
err_conv_not_possible = 1
err_otf_mc_noendmarker = 2
others = 3.
if sy-subrc <> 0.
write: / 'error', sy-subrc.
endif.
***/ Convert the PDF format to the table type required for the
**attachment.
call function 'QCE1_CONVERT'
tables
t_source_tab = t_line
t_target_tab = l_objbin
exceptions
convert_not_possible = 1
others = 2.
if sy-subrc <> 0.
write: / 'error', sy-subrc.
endif.
select single kunnr from vbak into l_kunnr1
where vbeln = nast-objky.
select single adrnr from kna1 into l_adrnr
where kunnr = l_kunnr1.
check sy-subrc is initial.
select single smtp_addr from adr6 into l_email
where addrnumber = l_adrnr.
SELECT SINGLE zzterrmg FROM zpsdsalrep INTO l_zzterrmg
WHERE zzsalesrep = l_kunnr1.
SELECT SINGLE zsupervisor FROM zpsdsalrep INTO l_zsupervisor
WHERE zzterrmg = l_zzterrmg.
SELECT SINGLE kunnr FROM kna1 INTO l_kunnr
WHERE sortl = l_zsupervisor.
SELECT SINGLE zsupervisor FROM zpsdsalrep INTO l_zsupervisor
WHERE zzsalesrep = l_kunnr1.
SELECT SINGLE zzsalesrep FROM zpsdsalrep INTO l_zzsalesrep
WHERE zzterrmg = l_zsupervisor.
SELECT SINGLE adrnr FROM kna1 INTO l_adrnr
WHERE kunnr = l_zzsalesrep.
CHECK sy-subrc IS INITIAL.
SELECT SINGLE smtp_addr FROM adr6 INTO l_email1
WHERE addrnumber = l_adrnr.
SELECT SINGLE adrnr FROM kna1 INTO l_adrnr
WHERE kunnr = l_kunnr.
CHECK sy-subrc IS INITIAL.
SELECT SINGLE smtp_addr FROM adr6 INTO l_email1
WHERE addrnumber = l_adrnr.
l_mail = l_email.
l_mail1 = l_email1.
l_l_mail2 = text-006.
l_l_mail = text-007.
Creation of the document to be sent
File Name
l_doc_chng-obj_name = 'SENDFILE'.
Mail Subject
concatenate text-001 nast-objky into l_doc_chng-obj_descr.
l_doc_chng-obj_descr = text-001.
Completing the recipient list
l_reclist-receiver = l_mail.
l_reclist-rec_type = k_u.
append l_reclist.
l_reclist-receiver = l_mail1.
l_reclist-rec_type = 'U'.
APPEND l_reclist.
l_reclist-receiver = l_l_mail.
l_reclist-rec_type = k_u.
append l_reclist.
l_reclist-receiver = l_l_mail2.
l_reclist-rec_type = 'U'.
APPEND l_reclist.
Mail Contents
l_objtxt = text-002.
append l_objtxt.
clear l_objtxt. " put in a blank line
append l_objtxt.
data: l_subject type solisti1.
concatenate text-003 '-' nast-objky into l_subject.
l_objtxt = l_subject.
append l_objtxt.
l_objtxt = text-004 .
append l_objtxt.
Calculate email size in bytes
describe table l_objtxt lines l_tab_lines.
read table l_objtxt index l_tab_lines.
l_doc_chng-doc_size = ( l_tab_lines - 1 ) * 255 + strlen( l_objtxt ).
Creation of the entry for the compressed document
for the email text
clear l_objpack-transf_bin.
l_objpack-head_start = 1.
l_objpack-head_num = 0.
l_objpack-body_start = 1.
l_objpack-body_num = l_tab_lines.
l_objpack-doc_type = k_raw.
append l_objpack.
Creation of the document attachment
(Assume that the data in OBJBIN is in BMP format)
describe table l_objbin lines l_tab_lines.
l_objhead = text-001 .
append l_objhead.
clear l_objpack.
**/ Creation of the entry for the compressed/attached document
l_objpack-transf_bin = k_true.
l_objpack-head_start = 1.
l_objpack-head_num = 1.
l_objpack-body_start = 1.
l_objpack-body_num = l_tab_lines.
l_objpack-doc_type = 'PDF'.
l_objpack-obj_name = text-005.
l_objpack-obj_descr = text-001.
l_objpack-doc_size = l_tab_lines * 255.
append l_objpack. "/ .
delete l_reclist where receiver = ''.
Sending the document
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1' " IN UPDATE TASK "/ .
exporting
document_data = l_doc_chng
put_in_outbox = k_x
tables
packing_list = l_objpack
object_header = l_objhead
contents_bin = l_objbin
contents_txt = l_objtxt
receivers = l_reclist
exceptions
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
others = 99.
if sy-subrc <> 0.
write: / 'unsuccessful', sy-subrc.
else.
concatenate l_mail ',' l_mail1 ',' l_l_mail into l_recipents.
syst-msgid = '8I'.
syst-msgno = '000'.
syst-msgty = 'S'.
syst-msgv1 = text-008.
skip.
syst-msgv2 = text-009.
syst-msgv3 = l_recipents.
clear: syst-msgv4. "syst-msgv2, syst-msgv3,
perform protocol_update.
write: / 'successful'.
endif.
**/Take_note it is a requirement to do a commit work for the
email to go into transaction SOST.
COMMIT WORK. "/Take_note .
if sy-subrc eq 0.
endif.
Regards,
Sreeram -
Hi all,
After generating output using smartforms, i want to send the output thro Email.
How to do the above?
Expecting reply.Hi
REPORT Z_RAJ_SEND_SPOOL_MAIL_ATT .
PARAMETERS : P_SPOOL TYPE TSP01-RQIDENT OBLIGATORY .
PARAMETERS : P_MAIL TYPE char100 OBLIGATORY .
TYPES : TY_LINE type string.
DATA: IT_ATTACHMENT TYPE soli OCCURS 0 WITH HEADER LINE.
DATA: IT_ATTACHMENT_LONG TYPE TY_LINE OCCURS 0 WITH HEADER LINE.
DATA: LV_PDF_SIZE type i.
DATA: LT_PDF type standard table of tline with header line.
PERFORM SEND_EMAIL USING P_SPOOL P_MAIL.
FORM send_email
--> X_SPOOL_ID
--> X_EMAIL
FORM send_email USING X_SPOOL_ID X_EMAIL.
DATA: LT_OBJPACK LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE,
LT_OBJHEAD LIKE solisti1 OCCURS 1 WITH HEADER LINE,
LT_OBJBIN LIKE solisti1 OCCURS 10 WITH HEADER LINE,
LT_OBJTXT LIKE solisti1 OCCURS 10 WITH HEADER LINE,
LT_RECLIST LIKE somlreci1 OCCURS 5 WITH HEADER LINE,
LV_DOCUMENT_DATA TYPE sodocchgi1.
DATA: L_ATT_LINES TYPE i.
DATA : LV_SPOOL_DESC(68) type c.
CHECK NOT ( X_EMAIL IS INITIAL ).
CLEAR: LT_RECLIST, LT_RECLIST[],
LT_OBJHEAD, LT_OBJHEAD[],
LT_OBJTXT, LT_OBJTXT[],
LT_OBJBIN, LT_OBJBIN[],
LT_OBJPACK, LT_OBJPACK[].
CLEAR LV_DOCUMENT_DATA.
Read spool and get the pdf internal table and name of spool
PERFORM READ_SPOOL USING X_SPOOL_ID LV_SPOOL_DESC.
CHECK NOT ( LT_PDF[] IS INITIAL ).
Convert pdf itab to 255 line itab.
data :LV_COUNTER type i.
data :LV_FROM type i.
loop at LT_PDF.
translate LT_PDF using ' ~' .
concatenate IT_ATTACHMENT_LONG LT_PDF into it_attachment_long.
endloop.
translate IT_ATTACHMENT_LONG using '~ ' .
append IT_ATTACHMENT_LONG.
clear : LV_COUNTER.
DO.
LV_COUNTER = strlen( IT_ATTACHMENT_LONG ).
if LV_COUNTER ge 255.
IT_ATTACHMENT = IT_ATTACHMENT_LONG(255).
append IT_ATTACHMENT.
SHIFT IT_ATTACHMENT_LONG by 255 places.
else.
IT_ATTACHMENT = IT_ATTACHMENT_LONG(lv_counter).
append IT_ATTACHMENT.
exit.
endif.
ENDDO.
Body of email
MOVE 'Email sent to you from SAP' TO LT_OBJTXT.
APPEND LT_OBJTXT.
LV_DOCUMENT_DATA-obj_name = 'SpoolMail'.
Title of the email as spool name
LV_DOCUMENT_DATA-obj_descr = LV_SPOOL_DESC.
LV_DOCUMENT_DATA-sensitivty = 'O'.
LV_DOCUMENT_DATA-expiry_dat = SY-datum + 15.
LV_DOCUMENT_DATA-doc_size = STRLEN( LT_OBJTXT ).
e-mail body
CLEAR LT_OBJPACK.
LT_OBJPACK-head_start = 1.
LT_OBJPACK-head_num = 0.
LT_OBJPACK-body_start = 1.
LT_OBJPACK-body_num = 1.
LT_OBJPACK-doc_type = 'RAW'.
LT_OBJPACK-doc_size = STRLEN( LT_OBJTXT ).
APPEND LT_OBJPACK.
For e-mail attachment
DESCRIBE TABLE IT_ATTACHMENT LINES L_ATT_LINES.
READ TABLE IT_ATTACHMENT INDEX L_ATT_LINES.
CLEAR LT_OBJPACK.
LT_OBJPACK-transf_bin = 'X'.
LT_OBJPACK-head_start = 1.
LT_OBJPACK-head_num = 1.
LT_OBJPACK-body_start = 1.
LT_OBJPACK-body_num = L_ATT_LINES.
LT_OBJPACK-doc_type = 'PDF'.
LT_OBJPACK-obj_name = 'email'.
LT_OBJPACK-obj_descr = LV_SPOOL_DESC.
LT_OBJPACK-doc_size = ( 255 * ( L_ATT_LINES - 1 ) ) + STRLEN(
IT_ATTACHMENT-line ).
APPEND LT_OBJPACK.
make recipient list
LT_RECLIST-receiver = X_EMAIL.
LT_RECLIST-rec_type = 'U'. "To external email id
APPEND LT_RECLIST.
send mail with attachment
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = LV_DOCUMENT_DATA
put_in_outbox = 'X'
TABLES
packing_list = LT_OBJPACK
object_header = LT_OBJHEAD
contents_bin = IT_ATTACHMENT
contents_txt = LT_OBJTXT
receivers = LT_RECLIST
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
If SY-subrc = 0.
write:/ 'Message sent'.
else.
write:/ 'Error encountered'.
endif.
ENDFORM. " send_email
*& Form read_spool
FORM read_spool USING X_SPOOL_ID Y_SPOOL_DESC.
DATA : LV_SPOOL_TYPE TYPE TSP01-RQDOCTYPE.
SELECT SINGLE RQDOCTYPE RQTITLE
INTO (lv_spool_type, y_spool_desc)
FROM TSP01
WHERE RQIDENT eq X_SPOOL_ID.
IF Y_SPOOL_DESC IS INITIAL.
concatenate 'Spool-' X_SPOOL_ID into Y_SPOOL_DESC.
ENDIF.
IF LV_SPOOL_TYPE eq 'LIST'. " If spool is a list
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = X_SPOOL_ID
NO_DIALOG =
DST_DEVICE =
PDF_DESTINATION =
IMPORTING
PDF_BYTECOUNT = LV_PDF_SIZE
PDF_SPOOLID =
LIST_PAGECOUNT =
BTC_JOBNAME =
BTC_JOBCOUNT =
TABLES
PDF = LT_PDF
EXCEPTIONS
ERR_NO_ABAP_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DESTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 9
ERR_BTCJOB_SUBMIT_FAILED = 10
ERR_BTCJOB_CLOSE_FAILED = 11
OTHERS = 12
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ELSE. " If spool is OTF
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = X_SPOOL_ID
NO_DIALOG =
DST_DEVICE =
PDF_DESTINATION =
IMPORTING
PDF_BYTECOUNT = LV_PDF_SIZE
PDF_SPOOLID =
OTF_PAGECOUNT =
BTC_JOBNAME =
BTC_JOBCOUNT =
TABLES
PDF = LT_PDF
EXCEPTIONS
ERR_NO_OTF_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DSTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 9
ERR_BTCJOB_SUBMIT_FAILED = 10
ERR_BTCJOB_CLOSE_FAILED = 11
OTHERS = 12
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. " read_spool
Regards,
Raj -
Quotation output through email,
HI All,
How can I send quotation output through email, Can some one provide me a step by step configuration guide for Output determination via email.Hi,
I hope your using SAP Standard Output type for Quotation. That is "AN00".
This is how you configure that.
Go to Tx: NACE
Highlight "V1 - Sales" line & click on "Output types" button. Then click on "Display/Change" button to come to Change mode.
Then highlight "AN00 - Quotation" line & click on "Details" Icon. (Magnifying Glass)
Check whether your using correct Access Sequence for your client in the "General" tab. If not change it to correct one. This will determine whch out out you want to select during processing. You can create you own access sequence using "Access sequences" Option in the NACE Tx.
Go to "Default Values' tab and select "Dispatch time" as "4 - Send immediately when Saving" - this is to send the email as soon as you save the quotation. If you don't want that, select appropriate one.
Then double click on "Processing routines" node. there you have to add Medium as "7 - Simple Mail". Check whether the "Form" & "Program" are correct. This will determine the layout of the output. Else get a ABAP's help to customize that.
Go to "Partner Functions" node & add relevant "Medium" as 7 & enter relevant Partner function that you want to send the output.
Now configuration is over.
Go to Tx: VV11 to create master data. Enter "AN00" as output type & press Enter.
Based on the access sequence, enter relevant data.
Save.
Now check with a new quotation.
Best regards,
Anupa -
hi,
Can anyone give me information or documentation on
"SENDING SCRIPT OUTPUT TO EMAIL"??
if possible plz send the code also.
waiting for your replies
bye
ARJUNHi,
Could you please expalain , is it ABAP Scripts?, or any other if other ,what is the format??
If ABAP script
http://help.sap.com/saphelp_nw2004s/helpdata/en/0e/56373f7853494fe10000000a114084/content.htm
Sending SAP SCRIPT to mail
sending sap script to mail id
Problem Sending SAP Script as a PDF attachment to external mail
Sending SAP Script Output to Mail & Fax
sending a script in mail (outside SAP)
How To send SAP SCRIPT AS an email.
Regards
Chilla
Maybe you are looking for
-
IMac shuts down when using Safari 2.0.4
My iMac shuts down when I visit certain websites such as Pogo or video sites. Took it to the Apple store and of course the problem wouldn't replicate there. They kept it to check out the scripts and logs to see if they could find a problem - without
-
Error message occurs after downloading. it says invalid drive:e:/ what am I doing wrong?
Error message occurs when trying to download itunes. It says invalid driver: e:/. What am I doing wrong?
-
Set JArray values with invalid key value: "LastUpdatedTime" on new alert rule creation
Hey all! I'm trying to create a new alert rule using version 0.9.11 of the Monitoring Library and am getting this error on alertsClient.rules.CreateOrUpdate: "Set JArray values with invalid key value: "LastUpdatedTime". Array position index expected.
-
How to run java source files from other java files??
hello all, i need to run 3 to 4 .java files (first.java,second.java,third.java) from one file. i tried the Runtime.getRuntime().exec(cmd); but here cmd must be an exe file. NOTE THAT i need to run the first.java file ,second.java file each time to ge
-
please help!!