Send idoc from one version of R/3 to different version

Hi All,
I have a scenario to send idocs from one R/3 system to another (both have different versions) .Can anyone tell me the step by step way to configure. Do I need to program anywhere to send or receive idocs Any help is really appreciated
Thanks
Michael

Hi michael,
The version change technique allows you to exchange idocs with systems using the older version of idocs.
For this v have to configure the sending system to generate back level idoc for receiving system using the partner profile. configuring the partner profile is enough to send idocs in this scenario.
Regards....
Arun.
Reward pts if useful.

Similar Messages

Sending idoc from one r3 system to another r3 system

Hi
I want to send the idoc from system A to system B only (not from B to A). Then is it need ports in both the systems or only in one system ?? If it is on one system..... on which system port is needed ?? (A or B) ?? similarly RFC destinations also......whether it needs one or two ??
thanks
kumar

Hi seshu,
thanks for your reply !! once you create the rfc destination and after that if you create the port for that rfc destination............whether port will be created for the source system side or target system side. ??
thanks
kumar

Is it Possible to send IDOCs from one system to itself?

Hi,
Is it possible for the R/3 system to send IDocs to itself?? If yes can you guys guide me on how to configure the system to do the same.
The requirement is for learning purpose only.
Regards,
VJ

dear vijayendra,
you can do it by creating two clients on your system jus talk to any basis person for creation of clients after that you will make the configration on both client by just login through that.
after proper configration you can send the idoc.
first create the client after that u can talk to me in more details.
i have around 2 year hands on experiance in ale idoc.
by
vijay dwivedi
rewards if answer is helpfull for you.

I need help to send idocs from 1 client to another , both in different systems

Hi all,
I am new to Idoc. I am trying to use idoc to send some table records of a custom table created in client 800 to client 020, both clients are in different systems.
I found examples of same scenario but for both clients in same system..
what changes should I make then to be able to send idoc .
any link showing step by step instructions would be great.
Thank you.

1. If you insist on keying in Pr; use the color or chroma key. If you want a quality product use a compositor like AE to do your keying.
2. Export to Encore

IDOC from One System to another

Hi All,
I am sending idocs from one system to another For Eg System A to System B .
Now suppose 2 idocs are generated 1 and 2.
Now how to determine , for idoc 1 in system A, what is the corresponding Inbound Idoc in System B because the data which is coming in System B might be different than in System A for the same Idoc?
Thanks in Advance.

Hi,
direction 1 for outbound idoc,
              2 for inbound idoc,
goto tcode WE02
enter direction - 2.
creation date
and basic type i.e. idoc type
double click on an idoc num.
on L.H.S u have 'Control REc' double click on it..
it contains all the sender details and to what outbound idoc it corressponds to -> basic type, message type
    -> Partner details like partner num, port, partner type
    -> date & time of creation
    -> and the other details
Regards,
Neelima.

Sending IDoc from R/3 to XI -ongoing

Hi,
With reference to my previous errors while sending IDoc to XI from R/3 system. I have resolved errors with help of Seshagiri and Kummari advise and help. But now I am getting new kind of error, while sending IDoc from R/3 its getting passed from R/3, but while checking it in XI throug SXMB_MONI I am getting below error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_POCreateIdoc_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_POCreateIdoc_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can any one advise me on this?
Thanks & Regards
Manish

Hi,
There were so many Mapping Objects under different Namespaces and under that different Message Mapping trees.
Under one tree I have tested the XML message and found the below error:
Cannot produce target element /ns0:MT_POFile/POItem/Price. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd Cannot produce target element /ns0:MT_POFile/POItem/Price. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
Kindly check if this is the correct error I am getting related to SXMB_MONI error message.
Regards,
Manish

Sending Idocs from R/3 4.6C to XI using qRFC

Hello everyone
We are working on SAP 4.6C . We need to send Idocs to XI using qRFC . The current qRFC version is 6.20.045 which i think is compatible with qRFC set up.
I have registered the destination in transaction SMQS .
But when we try to send the Idoc to XI , the XI is receiving it as tRFC.
Can anyone help and give some pointers as to what setting needs to be done on 4.6C?
Thanks
Shivika

Hi,
>>>>1. I am using BI 7.0 and want to pull the data from R/3 which is 4.6C. Can I implement this using XI?? If yes can any one guide me how to proceed with..
yes:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/18dfe590-0201-0010-6b8b-d21dfa9929c9
>>>>2. I want to Display the data inside the table of ECC 6.0 on to the portal. Can I do that with the help of XI. If yes, Please help me...
no need for XI - use webdynpro for that
Regards,
michal

Send PO from one system and create a SO in another system

Hello Gurus
ii am learning ALE IDOC and would like to do a complete hands on practice. I have been doing some basic scenarios and so far i am progressing well.
What i am planning to do:
Now i would like to do an end to end scenairo of sending a PO idoc from one system and this should create a SO in the other system.
Steps i am planning to do:
1). Configure the sending system for a outbound PO idoc
2). Configure the receiving system for a Inbound SO idoc
3). Maintain VOE2(EDPAR) and VOE4(EDSDC) tables for partner information and organization information respectively.
Questions:
1). Am i missing any steps?
2). I am confused on what to maintain in VOE2 and VOE4. Which information of PO should i maintin in VOE2 and VOE4 in the receiving system?
~Suresh

Hi Suresh,
this might be of some help.
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE - for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Create Model View
Tcode BD82 - Generate partner Profiles & Create Ports
Tcode BD64 - Distribute the Model view
Message Type MATMAS
Tcode BD10 - Send Material Data
Tcode WE05 - Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE - for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 - Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Create Model View
Tcode BD82 - Generate partner Profiles & Create Ports
Tcode BD64 - Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE - for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 - Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 - Send Material Data
Tcode WE05 - Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
kindly reward if helpful.
cheers,
Hema.

Sending IDOC from R/3 to MII error

Hi,
We are trying to send IDOC from R/3 4.7 to MII 12.1 (SP8 patch 9 on NW CE 7.11).
We followed the guide below:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3861e693-0e01-0010-e791-9b44d2693e6c
Connection of message listener to R/3 works fine.
RFC connection test from R/3 to message listener was successful.
But when we try to do model distribution we get this error " - Communication error occured. Server repository could not create function template for 'MODEL_VIEW_REPLICATE'.
Maybe someone encountered this error and can help to resolve it.
Thanks in advance.

Hi Michael,
What do you mean by "manually registered the ProgID"? The message listener configuration property is as below:
ProgramID: MII_IDOC_CONNECT_5
MaxReaderThreadCount: 1
SAPClient: 800
UserName: GAOMX
Password: xxxxxxxx
Language: EN
ServerName: blade01a.memc.com
PortNumber: 00
BindingKey: XMIIIDOC
And also, following is error message found from LOG VIEWER of the MII server:
here is one
Message: not supported FunctionModule MODEL_VIEW_REPLICATE for IDocActivationSpec
Date: 2011-07-21
Time: 15:30:18:060
Category: /System/Server/Connector/Rfc
Location: com.sap.mw.jco.jra
Application: sap.com/sapjra~xMIIIDOC05
Thread: Thread[Managed_Application_Thread_20,5,Managed_Application_Thread]
Data Source: j2ee/cluster/server0/log/system/server_00.log
and another one
Message: Server repository could not create function template for 'MODEL_VIEW_REPLICATE' caused by: java.lang.RuntimeException: not supported FunctionModule MODEL_VIEW_REPLICATE used with IDocActivationSpec registered for MII_IDOC_CONNECT_5 on system blade04a_MIT_00
Date: 2011-07-21
Time: 15:30:18:061
Category: /System/Server/Connector/Rfc
Location: com.sap.conn.jco
Application: sap.com/sapjra~xMIIIDOC05
Thread: Thread[Managed_Application_Thread_20,5,Managed_Application_Thread]
Data Source: j2ee/cluster/server0/log/system/server_00.log
Thanks,
Mike

Send IDOC from Business Connector to SAP faster

Hi Developer!
I need to send a very lot of IDOC converted from XML files from the Business Connector to SAP. The XML files are in different directories pro business partner, but they have a same type (ISU_MSCONS).
My problem, that the import take a lot of time. Only in every 3 seconds (IDOC creation time) gets (or works up?) the SAP one IDOC. I start diferent services pro partner at the same time to import the IDOCs, but I couldnt short the 3 second work time in the SAP. So you can count it easy, that in 1 minute I can import 20, in 1 hour 1200, in 1 day 28800 IDOCs instead of 100.000.
It is really parallel import? Have anybody any idea to make the import more faster. I know (asked the SAP Administrator) so, one BC - SAP connection (Program_ID) has more pools (= threads) in the SAP at the same time.
Thanks any help,
Charlie

Hi Satish,
You can achieve this requirement
1)If your external system going to support web service cals then send IDoc from External system as a web service, in PI use sender side SOAP and receiver side IDoc receiver channel to send IDoc.
or
2)Use proxy program ,implement the same ALE logic in PI.
or
3)Copy the Extenal IDoc message in to file folder as XML,then use file adapter to pick up this message and send it SAP using IDoc.
Regards,
raj

How can I send stuff from one iPhone to another via Bluetooth?

How can I send stuff from one iPhone to another via Bluetooth?

There are some apps that will let you send photos from one iOS device to another over BT.

How do I specify the gmail outgoing server if I have multiple gmail accounts in my mail? I have 2 business accounts and when I send mail from one account, it is sent from the other account and the sending email is not from the correct account.

I love my apple email and do not want to use google mail on safari. However, I have 2 gmail accounts set up on apple mail, but when I send mail from one of my gmail accounts (I choose the specific gmail account in the drop down window), it actually goes out as if it is from the other gmail account. I can't have that happen because one is my job, the other is a personal business account and unfortunately, the mail from both gmail accounts want to send through the personal business account. How do I make it send from a specific gmail account? I even tried deleting the accounts and setting them up again hoping I set it up wrong in the first place, but to no avail, it is still doing the same thing except this time I set the job account up first and then the personal business account and now everything goes from the job account! The only good thing is that the incoming messages work properly and they go into the correct inbox. Somebody please fix my outbox!

In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account. The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
Ernie

Can I send data from one icloud account to another

Can I send spreedsheets from one icloud account to another?

Have you tried attaching them to an email?

TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

search google for "iphone remove picture from contact"

Can you send iMessages from one iPad to another? If so how can I do this? Thanks

I have just got a new iPad and I'm wondering if you can send iMessages from one iPad to another? We are currently trying this out and can only send iMessages from an iPad to an iPhone is this correct? Thanks

You can use the Messages app to send messages to any iOS device or to a Mac running Mountain Lion. So yes you can send a message to another iPad.
Both iPads have to have Messages set up and you need to contact the other iPad using an email addresses as the "you can be reached at" email address.
Do you have it set up correctly on both iPads?
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/

Send idoc from one version of R/3 to different version

Similar Messages

Maybe you are looking for