Send IDoc to the same client
Hi:
How to send IDoc to the same client of the same system, e.g. for testing purpose? It seems I can't use the same logical system as both source and target in Distribution Model (SALE).
Please advise. Thanks
You wont be able to send it to same client. You can create/copy one more client assign logical system and try to perform your activity.
Similar Messages
-
SO idoc from PO idoc within the same client
Hello SAP Gurus,
We need help with the following .
The requirement is we need to create the Sales order from Purchase order using idocs within the same client .
We created the partner profile of the customer and the vendor .
Customer ---maintained an inbound parameters with message type ORDERS and process code ORDE
Vendor -
maintained outbound parameters with message type ORDERS and idoc type ORDERS05 and process code ME10 .
Now when we create the PO and check the status in WE02 we get the error status 56 , EDI: Partner profile inbound not available.
What could be the posible cause of the error .
Anybody with some suggestions and solutions .
Thanks
HoneyHi ,
You should maintain in the inbound parameters and out bound parameters also
out bound parametrs
message typ[e---ORDERS
receiver port----
basic type -
ORDERS05
tick on transfer idoc immediately
Inbound parameters
message type ---ORDERS
process code --ORDE
if you have any further clarifications let me know
Regards
Damu -
Is it possible to pass the idoc between the same client
Is it possible to transfer the idoc between the same system. I do not have two clients . I have only one client access. Is it possible to pass the idoc between the same client.
Hello Preethy,
This would not be possible as when you have to create the logical systems, you cannot create two entries for the same client.
And while defining the partner profiles as well.
IDocs are basically for two systems or two clients.
YOu may not require IDoc in one system itself. -
IDOC sender reciever as the same client !
Hi,
If I am using the same client as the sender and the receiver then shall i create the segment types and idoc types
and ztable again in the same client......?
Can i use same configuaration created for the rfc in SM59 for both sender and receiver ?
Please give me idea regarding this when it is to create the idoc with in one client... thnksHi,
Check this document for your reference:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d4ce58df-0901-0010-a4be-9ae9eda61107
cheers
Aveek -
Can IDoc sender and receive system be the same client?
thanks.
I think one client can't assign to two logical system.so?<i>Can IDoc sender and receive system be the same client?</i>
yes
Regards,
Prateek -
How to upload data from flat to ztables with in the same client by idocs
Hi Experts,
I have a requirement in IDOCS, I need to create a custom IDOC .I am working on IDES 4.6c. The reqirement is , there are ztables with header and item data. say for example Authors and Books. I need to upload data from flat file which is available in presentation server of the same client, which will updated in ztables by using idocs. For this i need to do ale settings also. The client is 800. There is no other client available. With in the same client i need to do the above stuff.
For this requirement how to approach (step by step) to accomplish.
Thanks in Advance.
Regards
J.S.VarmaHi,
This is the procedure.
create segments using we31. <b>don't forget to relaese it</b>
create idoc using above segments using we30 <b>don't forget to relaese it</b>
create message type using we81
create function module to upload data using se37
maintain process code using we42
create partner profiles we20.
In the fm module itself write the code for downloading the data from presentation server by GUI_DOWNLOAD.
Then update the database tables directly by insrt through other internal table in the same client itself.
Thanks
Manju -
MM-SUS and EBP-SUS in the same client
Hi experts
I have a doubt about implementationMM-SUS and EBP-SUS in the same client, If I send a PO from MM to SUS and after send a PO from EBP to SUS to the same vendor, the vendor will be able to see 2 POs with just one logon?
As I know when I replicate a vendor from MM to SUS a Business partner is created and when I replicate a the same vendor from EBP to SUS a new Business partner is created and are diferent BP so a user and pass diferent .
Thanks
NilsonHi Nilson,
If i understand your scenario, you'll replicate an existing R/3 vendor to EBP. The vendor will be a direct vendor in R/3 while the same would be used as for Indirects in EBP.
Well, when you replicate the R/3 vendor to EBP, the vendor has the R/3 link in the form of Backend Logical systen name in EBP.
So when you replicate the vendor from R/3 or EBP, there will be ideally only one entry for the vendor with references to R/3 and EBP systems.
Hope this clarifies your question.
Cheers,
Akash -
Extract data of a company within the same client.
Hi gurus. If I have more than one company configured in the same client in the ERP, Is there any way to extract data of only one of those companys in order to transfer or copy this information in other ERP?.
I've listened about TDMS but I'm looking for any procedure or tool that ensure that only the data of one company of multiples is extracted.
Thanks a lot!. Greetings from Colombia.Hi,
Could you please clarify what all data you want to extract. Is it master data ?
Incase you want to extract master data to any external system you can you SAP standard IDOCs using ALE.
Also you can put a filter in the distribution model to filter the extract data only to relvant company codes.
Thanks
Neel -
Is there any way to judge whether two streamings are casted by the same client?
Hello,
My app use two different streams to send video and audio from flash clients to the server.
So another client need to judge whether two streamings are casted by the same client or not.
Is there any way to do this?
For example, if it is possible to get ip address from netStream instance, it will be a solution.
Could anyone teach me this?
Thanks in advance!From the FCP 7 User Manual. You can access your copy of the Manual through the HELP menu on the menu bar at the top of your main screen.
x
Subtract Composite Mode
Subtract darkens all overlapping colors. Whites in the foreground image go black, while whites in the background image invert overlapping color values in the foreground image, creating a negative effect.
Blacks in the foreground image become transparent, while blacks in the background image are preserved.
Overlapping midrange color values are darkened based on the color of the background image. In areas where the background is lighter than the foreground, the background image is darkened. In areas where the background is darker than the foreground, the colors are inverted.
The order of two clips affected by the Subtract composite mode is important.
Difference Composite Mode
The Difference composite mode is similar to the Subtract composite mode, except that areas of the image that would be severely darkened by the Subtract composite mode are colored differently.
The order of two clips affected by the Difference composite mode does not matter. -
ALE process on the same client but on diffent System
Hi all
Is it possible to create a ALE process on the same client but on diffent System?
Thanks,
RajHi,
if you mean that you want to send data from client X on system A to client X on system B then yes.
Cheers -
HR Authorisation Management for different companies in the same client
Hi,
Could anyone please help in this....
My client has two companies. They want to restrict the authorisation to both the companies so that no one can see each other companies data and at the same time access tha data.
For Eg, there are two payroll officers, each in both the companies, If i give authorisation to run Payroll driver(PC00_M40_CALC), anyone of them can run payroll for any of the companies. (though,their Payroll area is different). There are many restrictions to be maintained like Maintance of Master data, Maintanance of OM structure as assignement of position, running Payroll, viewing the payslip etc...
How can this all be restricted so that, the respective companies can view and access their own data without interfering in to the other company.
I could only find object P_PYEVRUN which helps me restrict to view the created documents of posting for other company code.
Can anyone put light on how i should proceed further... I heard we can restrict HR master data, but what all i know is we can restrict at infotype level. My problem is, two persons should access PA30(each from different companies), but should not be able to edit other companies data.
Thanks
--PranithaHi ,
If you are creating the another company undar the same client . then you can not use different no. range.
or if you are going different client for different compnay code then you can use different number range for material master.
SAM -
Cant login multiple network accounts on the same client?
Setup:
I have created a simple Lion Server on a new i7 Mac Mini. I have configured Open Directory in Master mode and have setup 4 user accounts. I have enabled the File Sharing service and checked the "Make available for home directories" option on the "Users" file share. I have configured each of the 4 user accounts to use this location as the home folder. I have connected my client machines (all OSX Lion) to the Network Account Server.
Problem:
I can log one user into the client machine, but when using "Fast User Switching" and logging on as the second user I get the following error:
"You are unable to log in to the user account "guestaccount" at this time. Loggin to the account failed because an error occured"
In the console if I search for that user account the related error message is:
11-07-31 12:30:54.993 PM authorizationhost: ERROR | -[HomeDirMounter mountNetworkHomeWithURL:attributes:dirPath:username:] | PremountHomeDirectoryWithAuthentication( url=afp://inntaserver01.local/Users, homedir=/Network/Servers/inntaserver01.local/Users/guestaccount, name=guestaccount ) returned 16
Any thoughts as to why the Home Folder "mounter" failed in this scenario?Historically you have never been allowed to use Fast User Switching to log in multiple network logins on the same client machine. This certainly applied with Tiger, Leopard, and Snow Leopard. I have not yet personally tried this with Lion.
I believe that the underlying reason for this not being allowed is down to how AFP volumes are mounted. The AFP mount becomes 'owned' by the user that triggers the login. With a network login the first user becomes the owner and this means subsequent attempted network logins are denied access to that share and hence cannot access their home directories.
With Tiger, Leopard, and Snow Leopard servers, one could configure network home directories to be shared via NFS instead of AFP. NFS gets treated a lot different in terms of mounting, and is done more at a system level than a user level. While again I have not personally tried Fast User Switching with NFS shared home directories, this approach is specifically recommended by the authors of AquaConnect (a Macintosh Terminal Server solution) in order to allow multiple logins on the same Terminal Server. This seems to be for the same underlying reason. Using NFS does certainly work for use with AquaConnect and also works for the competing iRAPP Terminal Server product as well.
Unfortunately, Lion Server while it can be made to run an NFS server, will not let you configure using NFS for sharing home directories. I have actually reported this as a 'bug' in Lion server.
Neither the authors of AquaConnect or iRAPP have actually tested this scenario with Lion server yet, but AquaConnect do plan to investigate it. It could make it considerably more difficult to use their products.
So in summary, using NFS to share network home directories in theory would avoid the problem and can be done with a Tiger/Leopard/Snow Leopard server, but cannot be done with a Lion server. It is possible however to mix Lion with older server versions. This might for some people be a possible workaround.
PS. A bonus side-effect of using NFS shared home directories was that this allowed badly written software like Adobe's applications which are otherwise notorious for having major issues with network logins and home directories to work without errors. As an example Adobe Acrobat Pro introduced a bug in version 7.0 which prevented it being able to print-to-PDF (one of the major reasons to buy Acrobat Pro). It tooks two years for them to eventually fix this in Acrobat Pro 8.1 (I know because I spent that two years nagging them to fix it and was a beta tester). Unfortunately they then reintroduced the bug in Acrobat Pro 9.0. Fortunately I discovered this side-effect got round the issue although a clunkier workaround was also possible for Snow Leopard clients by redirecting certain folder paths. -
How can I make the LabVIEW CGI write to the same client window twice?
I'm building a CGI VI using LabVIEW 6i and the Internet Dev. Toolkit. I would like this VI to write to the same client browser window twice. The first reply will just be a confirmation that the form has been submitted, and the second reply will be the results from a measurement. Is there any way this can be done? I have tried to use the "CGI Write Reply.vi" twice in the same CGI VI, but only the first reply is received in the client window.
Very nice interface! It sounds like you might want two separate steps and two separate CGIs (or one CGI with a "step" flag). Here's one idea:
1. Pass the configuration info from the form, initiate the measurement, and return a confirmation page to the user. Embed something in the result page (a hiddden variable on a second form, perhaps?) that will identify the measurement that was requested upon a subsequent CGI call.
2. Either have the second form/CGI automatically submit itself after time T, or else allow the user to submit it. Use the hidden variable to identify which results set is being requested. If the measurement is finished, return the results; otherwise, return another confirmation page with a new time estimate.
Best of luck,
Jo
hn -
SLD: Pointing two business systems to the same client...
Hi Guys,
Is there anyway to make two business systems point to the same client(on the same r/3 technical system)? how about a work around?
Thanks,
HarshHarsh,
>><i>Finally all collapse to one client in production.</i>
Even though you will have multiple Business Systems in every envrionment, the final transport will happen from only one environment.
DEV --> QA --> PROD. In this case, objects are moved from dev to qa and then from QA to prod and so, all you will need is the trasnport target created in the QA business systems pointing to the Prod busines system and do the transport.
><i>While transporting to a new SLD(quality to prod) can I choose one transport target for multiple source business systems?</i>
Take a look at this document for multiple SLD transports. Should answer all doubts,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Regards,
Bhavesh -
Why to replicate the data for GTS? (we are on the same client)
Hi Folks,
We have a GTS installed on the same machine as ERP, so GTS and SAP ERP are on the same client.
As I understand the implementation guide we have to transfer all the master data like vendor/clients to GTS.
That would mean we replicate all the vendors and clients.
What is the sense of that? Why do we have to replicate all the data, We are on the same client?
Does GTS cannot use the normal vendor master?
Thx for help
DieterHi,
GTS has its own Database for Business Partners and Material Master, that is why you have to transfer it, even if its on the same client.
For Developpement you can have both on one machine, but for Testing and aspecially for Production SAP recommends to have 2 seperate machines. This for 2 Reasons:
1. GTS Runs some jobs (depending on what you implemented) that are very CPU consuming and you take the risk of putting your CPU to 100%
2. But more important, you will have to patch up GTS many times to cope with new legal regulations, if you have it on the Same machine you have to touch the ERP, wich most companies do not want...
Regards,
Marc
Maybe you are looking for
-
When I first set Aperture up during the trial, I left all the in the iPhoto library and referenced them. Since then I bought Aperture and now have it managing almost all of my masters (JPEG only at present). Like some others on the forum, I noticed t
-
Deadline + latest service packs = meh
I have an approval step for travel expenses with a 5-day modeled deadline that escalates the approval to the supervisor. This has worked for a few months in production but since we migrated to the latest service pack release, the modeled outcome tak
-
Hang in Mapping editor Canvas in OWB 10G r2
For the second time I have problem with the mapping editor. All objects and mappings are invisible. The background color is grey, and it's not possible to drag new objects into the canvas. The only workaround I have found, is a full new installation
-
I have a first generation I pod touch. I recently downloaded the 3.1 version to it. In the middle of the download, an apple with a bar appeared under it, the bar has been only half full for many hours now. I reset the Ipod, but still this appears, an
-
DW CS3 crashing due to negative margin CSS?
I have a simply CSS layout with an element I'm positioning with a negative top margin. Every time I input the margin attribute when in either Design view or Split view Dreamweaver throws the spinning beachball of death and I have to force quit. I inc