Send in for service procedure

i have sucessfully received a service tag number and have been requested to send device in for service
what is the procedure do i take it to apple
or do they send me out a box
thanks

I think this depends if it's personal or business/education. If it's a personal device I believe you would just take it to the Apple store for repair. If this is business/education device they send you a box to ship the device in.

Similar Messages

All headphones give distorted, crackly sound. Sometimes no sound. Headphone jack broken? Apple expresslane support giving a "generic error" message whenever I try to send in for service...

As in the title. For a while the headphone jack is occasionally crackly when the jack moves around in the port. It finally died today when I plugged it in and all the audio is heavily distorted and sometimes cuts out completely. Whenever I try to set up a service with Apple I keep getting this error message:
We're sorry, but we are unable to complete your request at this time.
Please try again in a few minutes or start over now.
I can't get through to the Irish support phone number either, it keeps saying number not recognised. Is there any other way I can send my iphone in for service (closest genius bar is 500km away...)

http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent

Send in for Service

My ipad will not accept my charger. I constantly get the message "Charging not...with this accessory." I've replaced the cord and adapter a few times. In any event, I followed the online steps to send it in for service but each time I get to the page where it reads "Select the part you want to replace" I am unable to move forward as none of the hyperlinks on the page work. Does anyone know how to get past this or how to send my ipad in for service without using the web site?

Call apple support for your location
Contacting Apple for Support and Service
http://support.apple.com/kb/HE57

Add SEND button for service commands

Would it be possible to add a "send" button at the bottom middle for service command view?
Service command is the menu you get when you phone a *123# number for example.
Currently you have to select your number/option by typing it and then select "Options" and select send. There are just two buttons currently in that view (Back and Options) on the Symbian Belle interface. My old Nokia had a dedicated send button
Anyway, would really make things easier because these type op menu's are used by the mobile banking sites and to check my cellphone account balances.
Thanks!

Agree, its very annoying that you have to press more buttons for simple operations like sending sms.

It it worth to send in for servicing as warranty expi

I have a creative muvo and I have been experiencing funny sound as i believe that the point that connect the ear piece is somehow damage and need adjustment to the ear piece in order ro hear it properly . Tried with different ear piece but the problem still persist. Wonder how much does it require if sent in for servicing?

It depends on whether you're in warranty or not, contact Customer Support to see what they advise.
Cat

Where do I send ipad for service/repair

I have logged sound problem with Apple regarding my ipad 3 wi-if (no sound, keeps going off for no reason, all avenues checked as suggested on forums) and because I only purchased it inOctober 2012 and believe it is under warranty and service should be free of charge. All details logged and received a reference number but no details on how and where to send it. Will Apple send me packaging via the post so I can send it directly to them?

https://locate.apple.com/

[send mail for service desk]

Dear Expert!
I have install Sevice Desk on SolMan 7.0 ehp 1, my customer can create new request to SolMan with Service Desk. and we can process this message. And we can sent message of customer to SAP AG. But I need , when customers have sent message to SolMan and after message is processed, must have email is sent to customers. So they can know message have sent and processed successful. I hope, you can show me about that as soon as possible. Thank you very much
Thanks and Best Regards,
Tru Hang

Hi
transaction type can be any one it is upto you
if you are using transaction type SLFN then goto the action profile of that transaction type normally is slfn_advanced but it is again upto requirement
you get upto that by spro scenario sp settinsgs- service desk - define action profile - assign action profile to business transactoin type
here you can choose or double click slfn to see which action profile is assign to it now
in the same actioon profile create one action to trigger mail
you can check below sap stnd guide
https://websmp110.sap-ag.de/~sapidb/011000358700001903822008E.PDF
Hope it solv ur prb
Regards
Prakhar

Macbook Pro keeps crashing.. Tried everything.. Do I send in for service?

My Macbook Pro has been going crazy over the last two hours. Could not install anything, lost all mail for the day. Did a reinstall with a clean install; wiped the disk clean. Went to update the software, crashed everytime. Am I missing something to do?

Here is the panic log
Sat May 12 03:11:41 2007
panic(cpu 0 caller 0x0034EDF2): mbuf address out of range 0x13260000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x2559bbd8 : 0x128b5e (0x3bb0bc 0x2559bbfc 0x131bbc 0x0)
0x2559bc18 : 0x34edf2 (0x3da7ac 0x13260000 0x22fc10 0x3dce3d0)
0x2559bc38 : 0x22e223 (0x1 0x2 0x22d3ce 0x466c630)
0x2559bd18 : 0x230e1d (0x466c858 0x1 0x353d51 0x3f9c6e0)
0x2559bd38 : 0x354827 (0x466c630 0x0 0x1 0x11ca89)
0x2559bdf8 : 0x345ecd (0x466c630 0x0 0x2559bebc 0x0)
0x2559be28 : 0x3419f8 (0x4980ad0 0x2559bebc 0x55ce104 0x0)
0x2559bf18 : 0x341c11 (0x47057d0 0x4980ad0 0xd 0xb0196bf0)
0x2559bf78 : 0x36cae8 (0x47057d0 0x3d8312c 0x3d83170 0x0)
0x2559bfd8 : 0x197e7e (0x3f97318 0x3f97318 0x359e4000 0x2559beac) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb01968e8
Kernel version:
Darwin Kernel Version 8.5.2: Mon Feb 13 16:31:48 PST 2006; root:xnu-792.8.37.obj~1/RELEASE_I386
Sat May 12 03:20:33 2007
panic(cpu 1 caller 0x0019CACE): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
CR0: 0x80010033, CR2: 0x7f21fbb2, CR3: 0x0162c000, CR4: 0x000006a0
EAX: 0x00000003, EBX: 0x254d346e, ECX: 0x254d304e, EDX: 0x044f6384
ESP: 0x7f21fbb2, EBP: 0x254d3d38, ESI: 0x00000001, EDI: 0x254d306c
EFL: 0x00010287, EIP: 0x7f21fbb2, CS: 0x00000008, DS: 0x00000010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x254d2e78 : 0x128b5e (0x3bb0bc 0x254d2e9c 0x131bbc 0x0)
0x254d2eb8 : 0x19cace (0x3c0544 0x1 0xe 0x3c02fc)
0x254d2f68 : 0x197b53 (0x254d2f7c 0x254d3d38 0x7f21fbb2 0x3b0048)
0x254d2f74 : 0x7f21fbb2 (0x3b0048 0x44f0010 0x10 0x10)
0x254d3d38 : 0x3b8c82 (0x80 0x0 0x0 0x121887)
0x254d3d78 : 0x3a1081 (0x463f474 0x0 0x254d3d98 0x19cae2)
0x254d3d98 : 0x18923e (0x3d51728 0x463f474 0x254d3dcc 0x11c970)
0x254d3dd8 : 0x12b389 (0x463f44c 0x3f23aa4 0x0 0x0)
0x254d3e18 : 0x124902 (0x463f400 0x0 0x80 0x254d3efc)
0x254d3f28 : 0x192efc (0x254d3f54 0x0 0x0 0x0)
0x254d3fd8 : 0x197fa6 (0x4630b68 0x4630b68 0x254d346e 0x7f21fbb2) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffffaa8
Kernel version:
Darwin Kernel Version 8.5.2: Mon Feb 13 16:31:48 PST 2006; root:xnu-792.8.37.obj~1/RELEASE_I386
Sat May 12 03:23:19 2007
panic(cpu 0 caller 0x00350473): mbuf address out of range 0x12a48000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x13a63c78 : 0x128b5e (0x3bb0bc 0x13a63c9c 0x131bbc 0x0)
0x13a63cb8 : 0x350473 (0x3da7ac 0x12a48000 0x13a63cf8 0x5a8)
0x13a63cf8 : 0x3529ae (0x25967100 0x5a8 0x13a63ebc 0x0)
0x13a63d38 : 0x35486c (0x13a63dd8 0x0 0x1 0x13572c)
0x13a63df8 : 0x345ecd (0x29b0948 0x0 0x13a63ebc 0x0)
0x13a63e28 : 0x3419f8 (0x2b4ad00 0x13a63ebc 0x2a2bc04 0x0)
0x13a63f18 : 0x341c11 (0x264c1f4 0x2b4ad00 0xd 0xb0196bf0)
0x13a63f78 : 0x36cae8 (0x264c1f4 0x2b363dc 0x2b36420 0x0)
0x13a63fd8 : 0x197e7e (0x2b60278 0x2b60278 0x49f000 0x13a637c8) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb01968e8
Kernel version:
Darwin Kernel Version 8.5.2: Mon Feb 13 16:31:48 PST 2006; root:xnu-792.8.37.obj~1/RELEASE_I386
Sat May 12 03:31:52 2007
panic(cpu 0 caller 0x0019CACE): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x73cfd1fc, CR3: 0x00b28000, CR4: 0x000006e0
EAX: 0x00403640, EBX: 0x0216cc00, ECX: 0x0216cc00, EDX: 0x02bc5fbb
ESP: 0x73cfd1fc, EBP: 0x13a8bce8, ESI: 0x02203480, EDI: 0x021ff500
EFL: 0x00010206, EIP: 0x73cfd1fc, CS: 0x00000008, DS: 0x00490010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x13a8bb64 : 0x128b5e (0x3bb0bc 0x13a8bb88 0x131bbc 0x0)
0x13a8bba4 : 0x19cace (0x3c0544 0x0 0xe 0x3c02fc)
0x13a8bc54 : 0x197b53 (0x13a8bc68 0x13a8bce8 0x73cfd1fc 0x13a80048)
0x13a8bc60 : 0x73cfd1fc (0x13a80048 0x190010 0x10 0x490010)
0x13a8bce8 : 0x377611 (0x2203480 0x13a8bd70 0x216cc00 0x121a12)
0x13a8bd68 : 0x3a167f (0x2bc5fbb 0x0 0x0 0x0)
0x13a8bd98 : 0x189646 (0x214a728 0x2bc5fa0 0x13a8bdcc 0x11c970)
0x13a8bdd8 : 0x12b389 (0x2bc5f78 0x28da4a4 0x0 0x0)
0x13a8be18 : 0x124902 (0x2bc5f00 0x0 0x54 0x13a8befc)
0x13a8bf28 : 0x192efc (0x13a8bf54 0x0 0x0 0x0)
0x13a8bfd8 : 0x197fa6 (0x28c74f8 0x28c74f8 0x216cc00 0x73cfd1fc) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffffac8
Kernel version:
Darwin Kernel Version 8.5.2: Mon Feb 13 16:31:48 PST 2006; root:xnu-792.8.37.obj~1/RELEASE_I386

Sending my ipod video 1st gen for service?

need some advice from anyone who has similar experience.
here's the scenario:
my ipod video 30gb 1st gen got contacted with water and now it is unable to switch on.. it'll flicker a white screen once or twice after sometime of inactivity..
i'm already out of warranty.. should I send it for servicing? or is it better to get a new ipod? i am from singapore and a new 30gb video 2nd gen will cost 400+..
please do advise me
thanks to all

Apple will not fix the iPod if it has been water damaged, it would cost too much money, cheaper to get a new iPod.
You may be able to sort this yourself though. How long have you let the iPod dry out? It can take a while to get rid of dampness.
If you can open the iPod (loads of sites show you how to do it). and leave the iPod in a warm area for a few days, then put the back on and try it again.
Also do you have house insurance, you may have accidental cover that would pay for a new iPod.
Ian

Pricing procedure for service pos

Hi guys,
WE have defined two pricing procedures i.e. for domestic and for import. When we create a service PO, domestic pricing procedure is being populated. Is this the standard functionality or do we need to use a separate pricing procedure for service POs? If that is the case, how to do it?
We are using the same document type and same purchase organisation for purchase order for services and materials
thanks in advance

Normaly the std domestic price will work for the service but you have service pricing also,
for the std service pricing
SPRO-MM-External service management-Maintain conditon for services
here you will find the service schema and which will defualt in the service PO
If want to see the service condtion
go to PO service tab and click on condition icon at the bottom of the screen and it will show you the service conditon with schema

I am sending my macbook pro in for service. The warranty co says i need to send a recovery disk to have my operating sys reinstalled if needed. Are there recovery disks for my system?

I am sending my macbook pro in for service. The warranty co says i need to send a recovery disk to have my operating sys reinstalled if needed. Are there recovery disks for my system?

pammyjoh wrote:
I am sending my macbook pro in for service. The warranty co says i need to send a recovery disk to have my operating sys reinstalled if needed. Are there recovery disks for my system?
"Are there recovery disks for my system?"
Don't know. You have not told us what system you have.

Open Procedure for service "BITS" in DLL "C:\Windows\system32\bitsperf.dll" failed

This error is occurring on my Windows Server 2008R2 server with SQL 2008R2 installed. I have found lots of "help" but none of it works...
The Open Procedure for service "BITS" in DLL "C:\Windows\system32\bitsperf.dll" failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.
The "help" I have found...
http://technet.microsoft.com/en-us/library/cc774913(WS.10).aspx
http://support.microsoft.com/kb/300956

I was able to re-install BITS. The BITS error seems to have gone away, but this error is now showing...
The object length of an object returned by Extensible Counter DLL "C:\Windows\system32\wbem\wmiaprpl.dll" for the "WmiApRpl" service was not correct. The sum of the object lengths returned did not match the size of the buffer returned. The performance
data returned by the counter DLL will not be returned in the Perf Data Block. The first four bytes (DWORD) of the Data section contains the count of objects.
Help?

Pricing procedure for service PO

Hi,
Why there is a seperate pricing procedure in service tab of the service POs?
Where we need to assign it?
Regards,

hi Rajan,
As services are placed differently in the SAP, for eg you make different service master record etc for procuring services, so only the conditions are also placed differently for the external service procurements...
You have to maintain the condition types, schema for while the conditions will be taken into account, and the condition table with the fields in it...
Do define all this at : SPRO >> MM >> External service management >> Maintain conditions for services >> Conditions:condition types, condition table, schema etc...
Regards
Priyanka.P

Pricing procedure for Service PO and Service Entry Sheet

Hi
Can the same pricing procedure be used for Service PO and Service Entry Sheet? What is the purpose of creating a seperate pricing procedure for service entry sheet?
Regards
Soumen

There is no separate pricing procedure for Service Entry Sheet. Whatever the schema is determined in Service PO, the price is calcuated during service entry sheet. However you can maintain separate calculation schema for service purchase orders.
This schema will be determined based on the schema group assigned in Vendor Master.

The Open Procedure for service "WDSTFTP" in DLL "C:\Windows\system32\wdstftp.dll" failed. WDS not PXE booting!

This morning came in to find clients were not getting there bootfiles through PXE. I checked the logs to find the following events related to WDS.
The Open Procedure for service "WDSTFTP" in DLL "C:\Windows\system32\wdstftp.dll" failed
The Open Procedure for service "WDSServer" in DLL "C:\Windows\system32\wdssrv.dll" failed
The Open Procedure for service "WDSMC" in DLL "C:\Windows\system32\wdsmc.dll" failed
Has anyone seen this or have a link to a resolution?
tconners

Hotfix loaded but didn't help.
Found a few articles referring to rebuilding the perf counter library. I ran "lodctr /R" failed first time then worked the second time. I believe the errors:
The Open Procedure for service "WDSTFTP" in DLL "C:\Windows\system32\wdstftp.dll" failed
The Open Procedure for service "WDSServer" in DLL "C:\Windows\system32\wdssrv.dll" failed
The Open Procedure for service "WDSMC" in DLL "C:\Windows\system32\wdsmc.dll" failed
Are gone but PXE boot still fails.
Do you think I might have to uninstall WDS and reinstall? "Using SCCM console to just remove PXE"
tconners

Send in for service procedure

Similar Messages

Maybe you are looking for