Send invoice (copies) to multiple email address

Hi,
Is it possible to send invoice(copies) to multiple email address? how?
Understand that we can maintain multiple email add for a customer. Example if 5 email add has been maintained for customer A, let say if I need to email 1 original invoice to email add 1 and email the other 2 copies invoice to email add 2 & 3 , how do I select the email add 1, 2 & 3 from the customer under the OUTPUT of change invoice (VF02) when we only input the customer code under Partner?
Appreciate your inputs on the above.

Hi,
I think it is possible to send invoice copies to multiple email addresses using comma in between them.
Regards,
Sarosh

Similar Messages

Send invoice document to multiple email ids

Hi Experts,
I wnat to email the invoice generated through tcode VF03 to multiple email ids.
As per standard, only one email id is active . So please suggest some solution.
Thanks in advance

Hi,
Create the distribution list and maintain the email ids in that.
T.code : SO23 - to create a distribution list.
And fuctional consultant that whether they can assign this distriution list in SRO to get the all email ids or u may have to write code in user exit.
Thanks.
Balu

Can i send to multiple email addresses for the same contact

I coach a baseball team and I want to create contacts under the kids' names with email addresses for both parents listed. Can I send email to multiple email addresses listed inside the same contact? I hope this makes sense.
Thanks!

You can do it individually, but it can also be done with Groups in Contacts, but you will need to create two or more groups. Once you have created the Groups in Contacts, drag the contacts that have multiple email addresses into each group. Then, select Edit Distribution List… from the Edit menu in Contacts.
For each group, select one address or the other for each contact. Do the same for the other group.
When you address an email, add both Groups to the address field in Mail.

I am sending emails to a Smart Group created in my address book. The contact in my address book has multiple email addresses. Is there a way for the email to go to both addresses? (ex: work and home email address under one contact)

In my address book, I have contacts that have multiple email addresses. (ex: home and work) I have created a smart group off of the company name in the contact. When I send emails, I want it to go to both email address listed in the contact. Is there a way to make this happen? Or do I have to have a separate contact for each email address?

I will agree with you on this one. Version 31 and all the fixes so far are a mess. Since I have been here answering questions for a little more than a year now I have learned to wait to upgrade until all the dust settles. I see no end to the dust storm version 31 has caused. I am still on version 24.6 and plan on staying there for the duration. At least until the developers comes to their senses and put out a working product.

When sending a PDF form by email, is there a way to make a button into a drop-down to select multiple email addresses?

Basically, I'm wanting to have multiple recipients set up within a button, so I can pick and choose who and when I send the form to. I can only seem to get it to either send to only one email address, or to send to multiple email addresses all at one time, without the option to select a recipient upon pressing the button.
If anyone could help, I'd be really grateful.
Many thanks in advance.
James

First of all, a drop-down menu doesn't allow for multiple item selection. You'll need a list-box field for that.
Once you have that set up you can use the value(s) selected in this field as the recipients of the email.

Trying to set up a group email "RAM" that will contain multiple email addresses. Receive error messages "check SMTP settings" or "Invalid email address" when I try to send a message to the group.

I am trying to set up the group email "RAM" that will contain multiple email addresses. I have inputted the name "RAM" as a corporation. In the section labeled "Email" I have inputed multiple email addreses so that when I want to send an email to the group "RAM" I just have to input the name "RAM" in the section labeled "To" , input the Subject in the Subject box & the email will be sent to the multiple addresses, yet when I do I receive either one of two error messages being "Invalid Email Address" or "Check SMTP settings" each of which allows me the option of with cancelling the email or send it anyway.

Bump. I'd like to know, too. I even have some synched Groups from my Apple Address Book I email to using Apple Mail on the Powerbook, but I can't see how to do a group mailing on the Touch either.
In normal Mail, I just start typing the name of the group, and it autocompletes, I hit return, and it fills in all addresses in the Group.

Ability to send email to multiple email addresses of the same contact perso

Hi All,
We are using SRM 5.5.
In "Personal Data" tab of "Employee Data" in Manage Business Partner, we have the ability to add multiple email address. But only one email can be selected as standard.
We have a new requirement that when a bid invitation is published, the email notification has to go to all the email addresses from that list. i.e to pick up as many email addresses as are stored in the contact (personal data) screen in the Manage Partner tab.
This changes also applies to the change and republication process of bid invitation when click on u2018inform bidder u2018 button.
Any information would be appreciated.
Regards,
S K.

One option is the following:
1. Go to SPRO and locate "define actions for document output"; select the "processing types" for BBP_PD_BID. Look at the "Smart Form Mail" processing class / method. If it is the standard class CL_PD_BID_PROCESSING_BBP, change it to one of your own Z class and method. (You could make copy of the standard CL_PD_BID_PROCESSING_BBP class.)
2. Modify the method PROCESS_BBP_BID_MAI_BCS of your Z class; locate the comment "Create and send email" and make changes to that section to add more email recipients of that contact person.

How do I send to contacts multiple email addresses at one time?

I have several contacts who ask that emails be sent to multiple emails address at the same time. How do I do that without creating additional cards for each email address?

Are you entering the addressees into Mail individually or are they included as part of an Address Book group? If you are using a group, I believe you will need to have multiple cards per individual.
If you are typing the addressees into Mail's "To:" and "Cc:" boxes, you can select among multiple addresses on one contact card just as you would select among multiple people with the same first name; just repeat for each address.

How do I enter multiple email addresses for a Firefox Sync account?

How do I enter my multiple email addresses for one Firefox Sync account?

Sorry, but Address Book does not allow you to select more than one email address to send to in a group. There's really no reason why people need multiple copies of a message, anyway; they have the option of forwarding email to another email address of theirs.
Mulder

How do I add multiple email addresses for a contact to a group?

(I'm a recent convert from eMailer to Outlook Express, to Entourage, and finally to Mail.app)
I'm trying to set up a group in Address Book that includes multiple email addresses from a given card. These are folks that want me to include, for example, both their work and home email addresses when I send to this particular group.
I see that Address Book has the ability to use "Edit Distribution List..." to select one email address for a given card/contact, but I can't get it to allow me to use two or three for a given card.
I suppose for now I can just create a duplicate card, and pick one address from each.
Is there a better way?

Sorry, but Address Book does not allow you to select more than one email address to send to in a group. There's really no reason why people need multiple copies of a message, anyway; they have the option of forwarding email to another email address of theirs.
Mulder

Managing multiple email addresses for the same contact

Hi
I have set up a group so I can email multiple people at once using the usual method. However, when I put the 'xx group' in the Bcc, it mails them fine, but where I have more than one address for the contact, it picks one without asking me.
How do I set it so it always chooses a certain (main) address? For one, it sent it one of two addresses I had listed as 'home', on another it sent it to an address I had listed as 'work'.
They also appeared in different positions on the card, e.g. it is not sending tit to the first one it sees on the card.
Any thoughts?
Thanks
Mark

found the answer somewhere else:
When sending a message to a Group and a Group member (or members) has multiple email addresses, the following was copied from Address Book Help.
Choose Edit > Edit Distribution List.
Select the group whose addresses you want to manage.
Click the pop-up menu (column header) to choose which type of information you want to manage—phone number, email address, or street address.
Select the address or phone number you want to use for each member with multiple addresses or phone numbers.

Broadcasting via Bursting to multiple email address for a single vendor cod

Hello -
I have a requirement to broadcast out a web template based scorecard to multiple email addresses for a given vendor code. We have gotten it to work via a single email address, but I need to send it to more than one email per vendor code.
Has anyone else tried this?
Thank you!

Hi Chris,
If my understanding is right, you must be using the master data of vendor Code(Which has an attribute to store Email IDs).
You can add multiple email ID to the same master data separated by semi colon ";"
If you are using user IDs instead, I dont think it is possible to use multiple user ID in the same attribute.
in this case you need to enhance the master data with a new attribute to store the second user ID and the create a separate setting for this attribute.
Hope this helps.
Regards.
Shafi.

Pick one of the multiple email address of a contact!

Hi,
In the current app that I am working on, the user is presented with the address book. Let's say the contact that is selected has multiple email addresses - Home, Work1, Work2 (in this order).
How can the app know which one the user picks? Let's say the user wants to select the Work2 address.
The code below has a for-loop that cycles thru all the values. I want to compare the value of mobileLabel to the value that the user selected in the AddressBook picker - how is that passed on to the app?
ABMultiValueRef emailProperty = ABRecordCopyValue(person, kABPersonEmailProperty);
NSString* email=@"";
NSString* mobileLabel;
for (CFIndex i = 0; i < ABMultiValueGetCount(emailProperty); i++)
mobileLabel=(NSString*)ABMultiValueCopyLabelAtIndex(emailProperty, i);
NSLog(@"mobileLabel = <%@>", mobileLabel);
// if ([mobileLabel isEqualToString:@"_$!<Mobile>!$_"])
// if ([mobileLabel isEqualToString:@"_$!<Home>!$_"])
email=(NSString*)ABMultiValueCopyValueAtIndex(emailProperty,i);
NSLog(@"email: <%@>", email);
self.emailFromPicker = email;
break;
[email release];

It's given to you in the delegate method.
- (BOOL)personViewController:(ABPersonViewController *)personViewController shouldPerformDefaultActionForPerson:(ABRecordRef)person property:(ABPropertyID)property identifier:(ABMultiValueIdentifier)identifierForValue
Parameters
personViewController
The sender.
person
The person personViewController is displaying.
property
The property whose value the user selected.
valueIdentifier
When property is a multivalue property, the value the user selected.
See the +ABPersonViewControllerDelegate Protocol Reference+.
Message was edited by: xnav

Product enhancement for SOX compliance to allow multiple email addresses

Currently SBO version 8.8 oly allows a single email address for each contact to synchronize with Outlook.
Contacts routinely have multiple email addresses which should all be enabled to synchronize with Outlook. by limiting to a single address in the contact record, the activities in the contact records will be missing critical history which may be requred for legal requirements onder Sarbanes Oxley and other legal reporting requirments for document retention requirements.
Section 302 of the Sarbanes-Oxley Act requires the CEO and CFO of a public company to personally certify and attest to the accuracy of their company's financial statements contained in periodic reports. Section 404 requires auditors to certify the underlying controls and processes that companies use to reach financial results. Both sections require proof that a company's reported financial information can be relied on - and require companies to invest in procedures that ensure information is recorded and managed in a trustworthy manner, including email. As an organization's dependence on electronic mail continues to grow, the mismanagement of email provides a growing target for litigators and regulators. Companies must ensure that records in digital form are managed with the same care and attention as records in paper form.
Business records must be protected at all times from unauthorized tampering and deletion, more so when a company is involved in audits, investigations, litigation or other formal proceedings. It is therefore of primary importance to copy and archive data before a user has a chance to manipulate it or delete it. Companies must ensure that directors, management and accounting personnel in particular, are informed of their obligation to preserve business records

you are correct, the only way to be able to send to multiple addresses for the same person in a group is to create one card per email address, with a code for the name as in john doe1, john doe2, or play with prefix, suffix or middle name fields to differentiate each card. to date there is no other way around this issue.
hope this helps.

Submit completed form to multiple email addresses

I am working with Acrobat 9 Pro and creating a pdf enquiry form to place on a website.
I need the form when submitted to be sent to 4 email addresses so that it can be properly assessed. Each of those recipients needs to be able to add the response to a response file, so I need to 'distribute' the form.
I can make is submit to multiple email addresses (having seen a previous post) by adding a submit button, enabling the extended features and not distributing. This is not a suitable solution, though, as it doesn't allow the recipient to add to the response file.
Whatever I try, I can only get it to send to the single email address shown in 'Preferences', so I'm stumped. Obviously I can set up an autoforward from a single account to the others, but that seems a clunky way of doing what should be a simple task.

There are a few ways to do this.
Set up E-mail Notifications and to enable the "Include submitted data" option. (E-mail Notifications settings are in the Options tab)
Share the responses by making the other person a Co-author, Contributor or Reader. The differences in account levels are explained here.
Share the repsonses by using Publish Responses feature. This will allow you to send out a URL that will display the View Responses and/or the Summary Report to anyone that has your URL. Further details are here.
-Jeff

Send invoice (copies) to multiple email address

Similar Messages

Maybe you are looking for