Send logs from c370 to m160

Hello
I would like to pass the logs and the quarantine from the c370 to the m160
I read the manual and the logs I think I know how to do it but I want to be sure.
in the "system administration" on the "log subscription" i have to select the log and syslog push or scp push. not quite sure.....
and for the quarantine I log on the M160 and then go to "managemente appliance" then "centralized services" and I select " Spam Quarantine".
but as above I am not sure.
to resume
i want to send logs and the quaratine from the c370 to the m160.
Regards.

Hi,
for pushing the logs from the C370 you will need to configure the SCP host in the log subscriptions and specify a directory on the M-Series.
For enabling the centralized ISQ, yes you need to add the C370 in the M-Series configuration. Go to "Cenetralized Services - Security Appliances" and click on "Add Email Security Appliance". On the C370 configure the external quarantine under "Security Services - External Spam Quarantine" and disable the local Spam quarantine under "Monitor - Quarantines".
Best regards,
Enrico

Similar Messages

Unable to send emails from any Apple devices

Since BT made the changes to Yahoo mail i have had problems with sending emails from my ipad and iphone (IOS8). The only way that i can successfully send an email is to log onto my laptop and send from a windows platform. I have checked all of the settings which are correct and im stumped. I am continuing to receive mail so why cant i send mail? I have contacted the BT customer support to be told that they are not trained on ios platforms so they cant help! pretty gobsmacked with that reposnse tbh, anyone have any ideas?

You may want to delete the email account and try setting it up again. Once you have deleted it, re-start your phone.
Set it up manually and do not use the wizard.
It is best to go through settings >mail contacts, calendars > add account… > don’t choose the BT or BTYahoo option, tap the ‘other’ option from the bottom of the list > Add Mail Account and enter the following details:
Name – it can be anything you want, but usually your real name is preferable
Address – your full BT Internet email address
Password – your email account password
Description – this can be used if you have more than one email account on the device but put something like ‘work’ or ‘BT Internet
Press “Next” and allow the verification (this may take a few minutes)
On the next screen it will want you to input incoming and outgoing mail server details:
Tap ‘IMAP’ at the top,
Incoming mail server settings:
Host name: mail.btinternet.com
Username: your full BT Internet email address
Password: your email account password
Outgoing mail server settings:
Host name: mail.btinternet.com
Username: your full BT Internet email address
Password: your email account password
Press ‘next’
Slide the notes and mail to be ‘on’ and press ‘save’ in the top-right
Check your email on the device and see if it is working. Try sending yourself a message and see if it arrives. If messages are not able to send do the following:
Additional setting changes
Go to Settings > Mail, Contacts, Calendars > tap your BT email account > a window will appear, tap on your email address > scroll down to the bottom of the window and tap where it says ‘SMTP’ > tap the primary server (which should be mail.btinternet.com) >make sure the following is on or enabled:
‘Use SSL’ should be ‘ON’
Authentication should be ‘password’
Server port should be ‘465’
Press ‘done’ in the top-right

Unable to send email from Mac using Outlook for Mac 2011

I have a single user that cannot send email from the Mac after migrating to Exchange 2013 on-prem. I myself am on the same Exchange server and am using a Mac with Office 2011 and am able to send/receive emails without any issues.
When the user sends an email it goes to the sent mail folder and syncs with the server and can be seen on a windows machine running any other version of Office (same in OWA). I've logged the user in on my Mac and blown away my profile and seeing the same issue.
Not sure if this narrows my issue down to the Exchange server receiving the send request from a Mac or if it's some setting in Outlook on the Mac?
I do not see anything in the logs on the server and have not seen any error son the Mac.
Any thoughts as to where my issues is?

Hi,
According to your description, I find that there is a single user cannot send email.
I suggest using Outlook on Windows machine and sending emails via this single user to verify whether the emails can be sent.
If the single user can send email via Outlook on Windows machine, it seems an issue on the Mac side.
I suggest asking Outlook for Mac Forum for help so that we can get more professional suggestions.
For your convenience:
http://answers.microsoft.com/en-us/mac/forum/macoutlook?tab=Threads
If can't send emails in Outlook, it seems an issue on the single user side.
I suggest trying to access the single user's mailbox via OWA to verify whether the mailbox has been migrated completely.
Thanks
Mavis
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

Cannot send mail from mac mail or Entourage

Hi guys,
Wondered if anyone out there can shed some light on this little problem.
I use Entourage for my emails & all was working fine until yesterday. I can receive mail from all and sundry but I can't send anything. I subscribe to ntlworld internet service and if log onto my email through their webmail, then it's fine. I've tried sending mail from mac mail and I get the same problem. I've been onto microsoft support & gone through all the troubleshooting with Entourage. The Entourage techy suggested it was my internet provider blocking my emails as they think I'm a spammer?? I phoned ntl & they insist it's nothing to do with them as I can send/receive from the website. (If I send an email with the address @ntlworld it's fine, but any other address i.e. all my clients/mates etc just stays in my outbox.
Nothing on any of my settings has changed so I'm at a loss what to do next.
Any suggestions greatly appreciated.
Thanks, Mel

it may be that your server (internet provider) has just started blocking outgoing mails not authenticated by them.
Go to your account set up...
and fill in the following details.
SMTP SERVER: smtp.mac.com
then click on advanced sending otions...
click on override default SMTP port... type 587
click on SMTP servber requires authentication...
use same setting as receiving mail server.
try this...

Can not send email from this house

I cannot send an email from any computer, laptop or phone (connected via wifi) from this house. However, if I take the laptop or phone to another place I can send with no problem. Oh, I can receive just fine.
Here's the problem. I am not using Verizon's provided email. I am using one of my own, i.e. [email protected]
Any email address (59 different accounts) that is on my server will not send from here. Now, no other Verizon user has this problem. Example: My parents have an email address from my server and it works. So does my son, as well as my brother and a few clients. None of them have a problem sending an email, and they are all Verizon customers. Yet, come to my house, use my internet and you can't send.
I am using MS Exchange 2003 and I have been an Admin for 10 years and I know what I am doing. Before anyone asks, I set my exchange to listen for port 587 as well.
I have called Verizon on numerous of occasions with no help. I called many IT friends and they keep saying it's Verizon. I called the Techs where my server resides and 7 of them attempted to figure this out and they too say it's Verizon. The only way I can send an email from my house is log onto my server remotely and send it from there, or use my phone's internet and send from there.
Now, I can understand if I had a problem with every Verizon account out there, meaning if no one else using the email from my server couldn't send, but when it only happens here at my house it makes no sense.
I have tried everything. I only had my laptop plugged directly into the modem (bypass the router) nothing. Got a new modem - same thing, still can't send.
Oh, I can send emails with the Verizon email provided though. Just not mine own.
Oh, I do have my own webmail setup on my server. I can log on to it via my browser and send from there just not from Outlooks, Thunderbird or any other 3rd party email.
Any ideas or help it greatly appreciated. I've gone through this for over a month and it's driving me crazy!

For the sake of example, we are going to pretend that we are setting up your fictional account. Using "[email protected]" as the 3rd party address and "[email protected]" and the password for logging into that account in webmail is "fakepassword" - Again, this is a fictitious account for the sake of an example.
The settings for using Verizon's servers would be:
Incoming Server: incoming.mydomain.com (or whatever your 3rd party server is) - For this server you set up everything according to your domain's settings.
Reply Address: [email protected]
Outgoing Server: outgoing.verizon.net
Server Requires Authentication: Yes
Username: fakeacct
Password: fakepassword
Requires a Secure Connection (SSL): No
Port: 25 (although 587 also works.)
These settings should work unless you have a Verizon/Yahoo account, in which case the outgoing server name is: outgoing.yahoo.verizon.net
Hope this makes a little more sense.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

I can not send email from my iPad . Says SMTP is incorrect

Why can't I send email from my iPad ? It says my SMTP is incorrect but it will not let me correct it

Hey Me520,
Thanks for using Apple Support Communities.
This article provides troubleshooting steps for Mail issues.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Log in to your email provider's website to ensure that the account is active and the password is correct.
Restart your iOS device.
Delete the affected email account from your device.
Tap Settings > Mail, Contacts, Calendars.
Choose the affected email account, then tap Delete Account.
Add your account again.
Have a nice day,
Mario

Cannot send mail from any mail account

I have a Mac Mini, late 2014 model, running OS X Yosemite version 10.10.2. I have constant difficulty sending mail from any of my mail accounts; these are iCloud, Googlemail, Yahoo and a personal one which uses 123-reg.co.uk. I am currently located in Greece, but have been having trouble for ages, even in the UK. I can receive mail, but I don't seem able to send it. Error message is usually simply cannot send mail using this server, select a different server. However, when connection doctor is run, all servers appear to be connected and I am logged in. Any ideas please?

rosiehwilson wrote:
Hi, not sure why that is relevant, but we arrived at the end of January this year. Here is a screen shot of a recurring problem, although in this case Gmail is not connected to the internet, which it usually is. Hope this helps.
Your outgoing Gmail servers not working, everything else seems OK.
So, what is not working for you (other than Gmail Sending)

Can no longer send email from my accounts but can receive

I have 5 email accounts set up on my imac. 3 are mine 2 are my partners. I can no longer send emails from my accounts but my partner still can. They all still receive mail but when I attempt to send mail I get:-
Cannot Send Message Using Server
Then i'm asked to select a different server from a list. I have tried all but to no avail.
I first of all deleted my partners sky.com account because it appeared to me that this was maybe overiding all other accounts and it was no longer needed on imac.
I then deleted one of my accounts - hotmail, to see if i added it again maybe it would work but now I cant even re add the mail account as everytime i go to mail, preferences account to set it up again the initial screen comes up with my partners details including the sky.com username and when i overwrite these and try to install hotmail acount I get told that logging in failed check user name and password is correct. Which they are.
All used to work fine but now I have these problems, they appeared to have started when my partner set up an icloud account and is synching with this - could this be the cause?
I can send email from my accounts from iphone still but no longer from imac.

First,
I'd run all availiable software updates. After that, I would try removing all of the accounts from "Mail", and then re-adding them. Be aware that if your folders and such are located on your mac, and not on the mail servers, you may risk lose some information (always have a back-up).
Sometimes, when you have a number of e-mail account there can be server issues abound. I would go into the server lists and make sure that they are set properly. If you see the "use only this server" box, check it for each of them.

Cannot send Emails from AOL (Mail App) Only Recieve

For some time now i cannot seem to send emails from my AOL on the app (Mac Mail). I can receive ok, but not send. It remains in my outbox then a message appears:
Cannot send message using the server AOL
This operation couldn't be completed (MCMaiErrorDomain error 1030)
I then run the Connection Doctor:
I get a Green light for Incoming mail (AOL IMAP)
I get a Red light for outgoing (AOL SMTP)
The message i get is:
'Trying to log in to this AOL SMTP account failed. Verify that the username and password are correct'
I have tried all the trouble shooting regarding checking the passwords, changing the passwords. Uninstalled and reinstalled. I can log on via the web ok and send and receive . I believe it happened when i updated the computer some time back because my Macbook does the same now as well as this iMac.
In the Outgoing Mail Server SMTP it reads: AOL (Offline)
In the drop down i goto edit server and this is what is showing:
Description Server Name In Use By Account
AOL smtp.aol.com AOL
In the Advanced section i have Port: 587
Box checked for 'SSL'
Box checked for 'Automatically detect and maintain account settings'
Box unchecked for 'Allow insecure authentication'
Any help would be much appreciated as this is becoming extremely frustrating

Hello Robertaa,
You may want to have a look at this topic with support offered by the user "David G" that might apply to your situation.
hope that helps some,
littleshoulders

Mail can't send email from 123-reg accounts

Hi all,
I've got an issue with Mac Mail can’t send email from 123-reg accounts.
I know there is a lot of articles on simular matters and some I have tried out with no luck, others are just speaking a whole other language.
Any help would be greatly recived, here's my situation below:
Running a iMac 2.8GHz Intel Core i5 on OS X 10.8.3
I’m using 3 accounts on Macs Mail client, one is my iCloud account that is working fine and the other two are my 123-reg accounts that I use for business purposes. I’ve been working like this for a couple of years now and about 6 months ago I upgrade my operating system from Snow Leopard to Mountain Lion.
2 or 3 months ago I randomly got a problem where I was unable to send any emails from my 123-reg account, I could only receive emails. I checked my settings and they were all correct and unchanged so I attempted to delete them and recreate the account but with no such luck.
I then decided to check if it was a problem at 123-regs end and attempted to log into web mail. This worked and was able to both send and receive emails so eliminated that possibility.
I also have these accounts set up on my iPhone, so checked if there was any issues and everything was working fine. I then checked my iphone details and made sure the same was on my desktop and still no such luck.
I’ve tried out some of the articles I’ve found on here (the ones written in plain English) still no results. I’m not very IT illiterate and just wondered if anyone else has got any ideas, whether there is something specific with 123-reg accounts and Mac Mail?
Many thanks.

Thanks
I just had another hunt around looking at posts and discovered that it was because I recently changed to BT Infinity and they had a block on.
I didn't even think to question the ISP.
https://discussions.apple.com/message/21173608#21173608

How to write to windows event logs from determinations-server under IIS

This is just an FYI technical bit of information I wish someone had shared with me before I started trying to write OPA errors to the windows event log... Most problems writing to the windows event log from log4net occur because of permissions. Some problems are because determinations-server does not have permissions to create some registry entries. Some problems cannot be resolved unless specific registry entry permissions are actually changed. We had very little consistency with the needed changes across our servers, but some combination of the following would always get the logging to the windows event log working.
To see log4net errors as log4net attempts to utilize the windows event log, temporarily add the following to the web.config:
<appSettings>

<add key="log4net.Internal.Debug" value="true"/>
</appSettings>
<system.diagnostics>
<trace autoflush="true">
<listeners>
<add
name="textWriterTraceListener"
type="System.Diagnostics.TextWriterTraceListener"
initializeData="logs/InfoDSLog.txt" />
</listeners>
</trace>
</system.diagnostics>
To add an appender for the windows event viewer, try the following in the log4net.xml:
<appender name="EventLogAppender" type="log4net.Appender.EventLogAppender" >
<param name="ApplicationName" value="OPA" />
<param name="LogName" value="OPA" />
<param name="Threshold" value="all" />
<layout type="log4net.Layout.PatternLayout">
<conversionPattern value="%date [%thread] %-5level %logger [%property{NDC}] - %message%newline" />
</layout>
<filter type="log4net.Filter.LevelRangeFilter">
<levelMin value="WARN" />
<levelMax value="FATAL" />
</filter>
</appender>
<root>
<level value="warn"/>
<appender-ref ref="EventLogAppender"/>
</root>
To put the OPA logs under the Application Event Log group, try this:
Create an event source under the Application event log in Registry Editor. To do this, follow these steps:
1. Click Start, and then click Run.
2. In the Open text box, type regedit.
3. Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application
4. Right-click the Application subkey, point to New, and then click Key.
5. Type OPA for the key name.
6. Close Registry Editor.
To put the OPA logs under a custom OPA Event Log group (as in the demo appender above), try this:
Create an event log in Registry Editor. To do this, follow these steps:
1. Click Start, and then click Run.
2. In the Open text box, type regedit.
3. Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog
4. Right-click the eventlog subkey, point to New, and then click Key.
5. Type OPA for the key name.
6. Right-click the new OPA key and add a new DWORD called "MaxSize" and set it to "1400000" which is about 20 Meg in order to keep the log file from getting too large.
7. The next steps either help or sometimes cause an error, but you can try these next few steps... If you get an error about a source already existing, then you can delete the key.
8. Right-click the OPA subkey, point to New, and then click Key.
9. Type OPA for the key name.
10. Close Registry Editor.
You might need to change permissions so OPA can write to the event log in Registry Editor. If you get permission errors, try following these steps:
1. Click Start, and then click Run.
2. In the Open text box, type regedit.
3. Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog
4. Right-click the EventLog key, select Permissions.
5. In the dialog that pops up, click Add...
6. Click Advanced...
7. Click Locations... and select the current machine by name.
8. Click Find Now
9. Select both the Network user and IIS_IUSERS user and click OK and OK again. (We never did figure out which of those two users was the one that fixed our permission problem.)
10. Change the Network user to have Full Control
11. Click Apply and OK
To verify OPA Logging to the windows event logs from Determinations-Server:
Go to the IIS determinations-server application within Server Manager.
Under Manage Application -> Browse Application click the http link to pull up the local "Available Services" web page that show the wsdl endpoints.
Select the /determinations-server/server/soap.asmx?wsdl link
Go to the URL and remove the "?wsdl" from the end of the url and refresh. This will throw the following error into the logs:
ERROR Oracle.Determinations.Server.DSServlet [(null)] - Invalid get request: /determinations-server/server/soap.asmx
That error should show up in the windows event log, OR you can get a message explaining why security stopped you in "logs/InfoDSLog.txt" if you used the web.config settings from above.
http://msdn.microsoft.com/en-us/library/windows/desktop/aa363648(v=vs.85).aspx
Edited by: Paul Fowler on Feb 21, 2013 9:45 AM

Thanks for sharing this information Paul.

Error: Not able send mail from OWA 2010. When I send mail, the mails go to Drafts Folder.

Error: Not able to send mail from OWA 2010. When I send mail, the mails go to Drafts Folder. I have installed everything correctly but when I tried to open the OWA and trying to send mail from OWA. The mails do not deliver and mails become saved in Drafts folder. I tried to re-send messaged from Draft also but not able to send.
Screen Shot: http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/Error%20-%20Not%20Able%20to%20Send%20Mail%20from%20OWA%202010.docx
Scenario: I have below configuration of exchange 2010 server Setup:
1. Windows Domain Controller with Global Catalog on Windows Server 2008 which only for Windows 2008 Server Native.
Server Name: WDC2010
Domain: Blazex.Com
2. Hub/Client Access Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Hub/Client Access Exchange role servers.
Server Name: HC2010.blazex.com (This is not a Addition Member server or ADC)
Role: Hub and Client Access Server.
3. Mailbox Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Mailbox Exchange role servers.
Server Name: MBX2010.blazex.com (This is not a Addition Member server or ADC)
Role: Mailbox Server.
4. 2nd Mailbox Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Mailbox Exchange role servers.
Server Name: 2MBX2010.blazex.com (This is not a Addition Member server or ADC)
Role: Mailbox Server.
5. Client Windows 7: It is installed on Windows 7 Ultimate Workstation. As per Microsoft recommendation, I have just installed Windows 7 and then join this computer to Blazex.com.
Workstation Name: WIN7.blazex.com
Role: Workstation
Error Description: I have installed everything correctly but when I tried to open the OWA and trying to send mail from OWA. The mails do not deliver and mails become saved in Drafts folder. I tried to re-send messaged from Draft also but not able to send.
Screen Shot (Same As Above): http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/Error%20-%20Not%20Able%20to%20Send%20Mail%20from%20OWA%202010.docx
I don't know what I am missing but I think there is some configuration I need to do on Hub/Client Access Server (HC2010). I tried to access the mailbox on XP Client system through OWA. I get the same problem as Win7.
Can someone please help me on this?
Thanks and Regards
Shambhu

Hi Subhash,
I have done the troubleshooting but I didn't find any problem at server side. I will send you mail also with all EXBPA report and as well DC, HC and Mailbox servers' Application Log and System Log.
Below are the questions's answers which was asked by you:
1.     Please check whether you can send email via Outlook.
I am not able to open the MS Outlook. Please check all details in this thread : http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c491c5c7-7d6f-48ff-97fa-6bf83d94e53c
2.     Please run EXBPA to have a health scan.
I have run the EXBPA and didn't see any critical Problem. I have took the screen shot and report. Please have a look in below screen shot link:
a. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/EXBPA.docx                                                                            - Final Report
b. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.BaseLine.200906270226501077.data.xml                        - Baseline Health Check
c. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Connectivity%20Test.200906270223318201.data.xml      - Connectivity Check
d. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Health%20Check.200906270125477730.data.xml            - Health Check with 2 Hr. Baseline option
e. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Permission%20Check.200906270224343377.data.xml      - Permission Report
The error which I received in EXBPA, that allready ignored by you and told that it is bug in EXBPA. Have a look here: http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/d4bb03bb-db84-4a8b-83ba-19937d7dcacf
3.     Please check application log, whether any error event logged there. They could come from ADAccess related error or etc.
I didn't see any ADAccess event on the server. For this I have left my lab PC open and I will check again.
4.     We find that if mail .que gets corrupt, then this issue will occur, please try to move the affected user to another store and then test the issue.
I am facing this problem with all users (7 users). Anyway I moved one user from one server Mailbox Database (2mbx2010) to Other Server Mailbox Database (mbx2010). After that
a) Rebooted the Workstation
b) Login successfully with same user.
c) Delete the Old MS Outlook Profile
d) Create New profile for same user without any problem.
e) Tried to login in MS Outlook and got the same error. : http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c491c5c7-7d6f-48ff-97fa-6bf83d94e53c
f) Open the OWA successfully for Same user.
g) Tried to send mail but again mail went to Drafts Folder.
5.     I noticed that you test the issue after you close outlook. I recommend you to reboot your pc and then access
mailbox via OWA to test the issue.
I tried you suggested option, but sorry it also couldn't help.
6. You also check your disk space.
     All Servers have Enough Disk Space. Check the EXBPA Report.
7. You may run EXTRA to get log information for further troubleshooting.
Need more time for this.
8. Please save application log, system log as *.evt file, then send them with EXTRA,EXBPA report to [email protected] .
   I have sent it as your mentioned mail address OR, you can get the mentioned log from below link also:
   a) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/WDC2010%7C_APPLICATION.evtx           - DC/GC Application Log
   b) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/WDC2010%7C_SYSTEMEVENT.evtx          - DC/GC System Log
   c) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/HC2010%7C_APPLICATION.evtx              - Hub/Client Application Log
   d) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/HC2010%7C_SYSTEM.evtx                      - Hub/Client System Log
   e) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/MBX2010%7C_Application.evtx                - Mailbox Application Log
   f) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/MBX2010%7C_System.evtx                      - Mailbox System Log
There will be some error log you will be that the system is not able to communicate with DC/DC, MBX or HC at everyday around 3 AM or some time 6 PM Evening also. These error came because I have installed VM on Windows 7 Workstation and after 45 min or one hrs. if I don't work on PC, then pc goes to sleep. so you may ignore these alerts.
I hope my answer will give you some clue and I expect more help from your side.
With Best Regards
Shambhu Sharma

Problem with Runtime Workbench and with sending data from XI to SLD

Hello 
 
Could I have a little help, a hint in the two following topics: 
 
1. I run Runtime Workbench -> Component Monitoring -> Display All and I get this error: 
 
Error during communication with System Landscape Directory: User credentials are invalid or user is denied access 
 
In filesystem log I can find like this: 
 
XIRWB.com.sap.aii.mdt.frames.jsp_error [SAPEngine_Application_Thread[impl:3]_40] Fatal: Error during communication with System Landscape Directory: User credentials are invalid or user is denied access 
Thrown: 
MESSAGE ID: com.sap.aii.rwb.agent.server.rb_LCRAgent.landscapeCommunicationError 
com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: User credentials are invalid or user is denied access
 at com.sap.aii.rwb.agent.server.SLDAgentBean.convertException(SLDAgentBean.java:1472)
 at com.sap.aii.rwb.agent.server.SLDAgentBean.buildSLD(SLDAgentBean.java:773)
 at com.sap.aii.rwb.agent.server.SLDAgentBean.provideSld(SLDAgentBean.java:269)
 at com.sap.aii.rwb.agent.server.SLDAgentBean.getXIDomain(SLDAgentBean.java:711)
 at com.sap.aii.rwb.agent.api.SLDAgentObjectImpl0_0.getXIDomain(SLDAgentObjectImpl0_0.java:375)
 at com.sap.aii.rwb.agent.api.SLDAgent_Stub.getXIDomain(SLDAgent_Stub.java:436)
 at com.sap.aii.rwb.agent.client.EJBAgent.getXIDomain(EJBAgent.java:255)
 at com.sap.aii.rwb.util.web.model.AppMainModel.getSelectedDomain(AppMainModel.java:138)
 at com.sap.aii.rwb.util.web.model.DomainRep.build(DomainRep.java:121)
 at com.sap.aii.rwb.web.componentmonitoring.model.ObjectIdentificationTree.getComponentTree(ObjectIdentificationTree.java:117) 
 at jsp_component_monitoring1321125174985._jspService(jsp_component_monitoring1321125174985.java:217)
 at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
 at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:68)
 at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
 at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doGet(CmPageProcessor.java:27)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
 at jsp_FC_Secure1321125169379._jspService(jsp_FC_Secure1321125169379.java:24)
 at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(AccessController.java:219)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) 
Root cause: 
com.sap.lcr.api.cimclient.UnauthorizedUserException: User credentials are invalid or user is denied access 
 at com.sap.lcr.api.cimclient.HttpRequestSender.processResponse(HttpRequestSender.java:577)
 at com.sap.lcr.api.cimclient.HttpRequestSender.send(HttpRequestSender.java:341)
 at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:280)
 at com.sap.lcr.api.cimclient.CIMOMClient.performBatchOperation(CIMOMClient.java:1251)
 at com.sap.lcr.api.cimclient.CIMClient.performBatchOperation(CIMClient.java:2268)
 at com.sap.aii.utilxi.sld.MRSldProxy.stage1(MRSldProxy.java:989)
 at com.sap.aii.utilxi.sld.MRSldProxy.loadComponents(MRSldProxy.java:918)
 at com.sap.aii.utilxi.sld.MRSldProxy.loadSld(MRSldProxy.java:907)
 at com.sap.aii.utilxi.sld.SubSystemFactory.createSldFromSld(SubSystemFactory.java:373)
 at com.sap.aii.utilxi.sld.SubSystemFactory.createSldFromSld(SubSystemFactory.java:434)
 at com.sap.aii.rwb.agent.server.SLDAgentBean.buildSLD(SLDAgentBean.java:764)
 at com.sap.aii.rwb.agent.server.SLDAgentBean.provideSld(SLDAgentBean.java:269)
 at com.sap.aii.rwb.agent.server.SLDAgentBean.getXIDomain(SLDAgentBean.java:711)
 at com.sap.aii.rwb.agent.api.SLDAgentObjectImpl0_0.getXIDomain(SLDAgentObjectImpl0_0.java:375)
 at com.sap.aii.rwb.agent.api.SLDAgent_Stub.getXIDomain(SLDAgent_Stub.java:436)
 at com.sap.aii.rwb.agent.client.EJBAgent.getXIDomain(EJBAgent.java:255)
 at com.sap.aii.rwb.util.web.model.AppMainModel.getSelectedDomain(AppMainModel.java:138)
 at com.sap.aii.rwb.util.web.model.DomainRep.build(DomainRep.java:121)
 at com.sap.aii.rwb.web.componentmonitoring.model.ObjectIdentificationTree.getComponentTree(ObjectIdentificationTree.java:117)
 at jsp_component_monitoring1321125174985._jspService(jsp_component_monitoring1321125174985.java:217)
 at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
 at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:68)
 at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
 at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doGet(CmPageProcessor.java:27)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
 at jsp_FC_Secure1321125169379._jspService(jsp_FC_Secure1321125169379.java:24)
 at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(AccessController.java:219)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
 
 
 
I don't know what is wrong. 
I have configured: 
- SLDCHECK work properly, 
- none of the users PI* type not lock, 
- password to the PI* users in exchangeProfile entered correctly, 
- In VA in the JCo RFC Provider I have properly configure: AI_RUNTIME_JCOSERVER, LCRSAPRFC, SAPSLDAPI_SID - from the ABAP I can connect to this programs ID 
- In VA in SLD Data Supplier I have properly configure bookmarks HTTP Settings and CIM Client Generation Settings. CIMClient Test is OK 
 
I do not know what else I can see, what else I have properly configured ... I looked at the notes:: 936093 jak i 721548... 
 
 
2. I can't send data from XI to SLD, ie makes me a system definition in Web As Abap and Web as Java but nothing appear to me in Exchange Infrastructure. Exchange Infrastructure is empty - what is wrong?? 
I carried out the recommendation by 764176 and 1031321 notes 
 
I restart below applications (no effect)... 
com.sap.xi.directory (Integration Builder/Configuration) 
com.sap.aii.af.app (Adapter Engine) 
com.sap.xi.rwb (Runtime Workbench) 
com.sap.xi.repository (Integration Builder/Design) 
 
Can I ask for help and guidance in these topics? 
 
Regards 
RP 

I increased logging in the NWA (Configuration -> Log Configuration) - and increased the some things here to log ALL. So that from the NWA (Monitoring -> Logs and Traces) I see a little more information (but does not follow that with which the user is a problem). 
 
Here are some interesting logs ... 
I was most rash or irritation of those that say about the lack of credentials u2013 I must use Viusal Administrator and set good service ... 
 
What do I have done: 
In the Visual Administrator -> Cluster -> Server -> Services -> SLD Data Supplier 
I have set in the HTTP Settings tab the host and port SLD, the user name and password is also entered as it is in the SLD. To be sure, already have set for the user entered here such roles as: 
SAP_SLD_ADMINISTRATOR 
SAP_SLD_CONFIGURATOR 
SAP_SLD_DEVELOPER 
SAP_SLD_GUEST 
SAP_SLD_ORGANIZER 
Maybe we are talking in this place about a different user? 
 
Similarly, when it comes to tab CIM Client Generation Settings - here's all the same thing done. CIMClient test shows that everything is OK. 
When I click the button: This trigger the transfer of data to the SLD gets the message that everything was shipped correctly. Indeed, I received an instance of JAVA in SLD 
Also clicked on this icon: Assign application roles to user group - got information that everything is attached properly. 
 
By ABAP side, the connections: INTEGRATION_DIRECTORY_HMI, SAPSLDAPI, LCRSAPRFC, AI_RUNTIME_JCOSERVER and AI_DIRECTORY_JCOSERVER work correctly, ie I can perform the test - which means that programs ID are properly positioned in JCO Provider in VA. 
 
Puzzling is this message: 
The SLD data is inconsistent. 
 
Strange also that the message (from the ABAP everything is available in SMGW no errors): 
Connect to SAP gateway failed 
 
And what is this error: 
 
could not sync ExchangeProfile: 
Thrown: 
com.sap.rprof.dbprofiles.DBException: Connect to SAP gateway failed 
Connect_PM TYPE=A ASHOST=saptest2 SYSNR=60 GWHOST=saptest2 GWSERV=sapgw60 PCS=1 
 
LOCATION CPIC (TCP/IP) on local host with Unicode 
ERROR partner 'saptest2:sapgw60' not reached 
TIME Thu Feb 23 07:28:07 201 
RELEASE 700 
COMPONENT NI (network interface) 
VERSION 38 
RC -10 
MODULE nixxi.cpp 
LINE 2513 
DETAIL NiPConnect 
SYSTEM CALL connect 
ERRNO 79 
ERRNO TEXT A remote host refused an attempted connect operation. 
COUNTER 2 
 
 
Below is a list of some interesting logs ... 
 
########### 
 
Insufficient permissions for getting SLD access information. You can add permissions for your application via the SLD service in the 'Visual Administrator'. 
 
############# 
 
SLD is not accessible. Check SLD Data Supplier service settings. 
 
########### 
 
"Warning","2012-02-22","07:53:50:986","Data get on com.sap.sldserv.data.GetSAPBCCentralServiceInstance class processing failed. htThe SLD data is inconsistent. This is an internal processing problem.","/System/Server/SLDService","com.sap.sldserv.DataCollector","n/a","saptest2","Server 0 60_36694", 
 
######### 
 
com.sap.lcr.api.cimclient.UnauthorizedUserException: User credentials are invalid or user is denied access 
 
################ 
 
Full Message Text
CPA Cache not updated with directory data, due to: Couldn't open Directory URL (http://saptest2.unx.era.pl:56000/dir/hmi_cache_refresh_service/ext?method=CacheRefresh&mode=C&consumer=af.xit.saptest2), due to: HTTP 503: Service Unavailable
 
################## 
 
Full Message Text 
 
could not sync ExchangeProfile: 
Thrown: 
com.sap.rprof.dbprofiles.DBException: Connect to SAP gateway failed 
Connect_PM TYPE=A ASHOST=saptest2 SYSNR=60 GWHOST=saptest2 GWSERV=sapgw60 PCS=1 
 
LOCATION CPIC (TCP/IP) on local host with Unicode 
ERROR partner 'saptest2:sapgw60' not reached 
TIME Thu Feb 23 07:28:07 201 
RELEASE 700 
COMPONENT NI (network interface) 
VERSION 38 
RC -10 
MODULE nixxi.cpp 
LINE 2513 
DETAIL NiPConnect 
SYSTEM CALL connect 
ERRNO 79 
ERRNO TEXT A remote host refused an attempted connect operation. 
COUNTER 2 
 
Connect_PM TYPE=A ASHOST=saptest2 SYSNR=60 GWHOST=saptest2 GWSERV=sapgw60 PCS=1 
 
LOCATION CPIC (TCP/IP) on local host with Unicode 
ERROR partner 'saptest2:sapgw60' not reached 
TIME Thu Feb 23 07:28:07 201 
RELEASE 700 
COMPONENT NI (network interface) 
VERSION 38 
RC -10 
MODULE nixxi.cpp 
LINE 2513 
DETAIL NiPConnect 
SYSTEM CALL connect 
ERRNO 79 
ERRNO TEXT A remote host refused an attempted connect operation. 
COUNTER 2 
 
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:457) 
at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1015) 
at com.sap.mw.jco.JCO$Client.connect(JCO.java:3238) 
at com.sap.rprof.dbprofiles.DBProfiles.getProfile(DBProfiles.java:101) 
at com.sap.rprof.dbprofiles.RemoteProfile.readRemoteProfileFromMedia(RemoteProfile.java:1288) 
at com.sap.rprof.dbprofiles.RemoteProfile.getRemoteProfileFromFactory(RemoteProfile.java:195) 
at com.sap.aii.utilxi.prop.rprof.ExchangeProfilePropertySource.readProfile(ExchangeProfilePropertySource.java:177) 
at com.sap.aii.utilxi.prop.rprof.ExchangeProfilePropertySource.sync(ExchangeProfilePropertySource.java:165) 
at com.sap.aii.utilxi.misc.api.AIIProperties.sync(AIIProperties.java:582) 
at com.sap.aii.af.service.sld.SLDAccess.syncExchangeProfile(SLDAccess.java:43) 
at com.sap.aii.adapter.xi.ms.SLDReader.fire(SLDReader.java:52) 
at com.sap.aii.adapter.xi.ms.SLDReader.run(SLDReader.java:167) 
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) 
at java.security.AccessController.doPrivileged(AccessController.java:219) 
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) 
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) 
 
############## 
 
Full Message Text 
 
Import of software component version list from component repository failed 
Thrown: 
com.sap.lcr.api.cimclient.LcrException: User credentials are invalid or user is denied access 
at com.sap.lcr.api.cimclient.HttpRequestSender.processResponse(HttpRequestSender.java:577) 
at com.sap.lcr.api.cimclient.HttpRequestSender.send(HttpRequestSender.java:341) 
at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:198) 
at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:146) 
at com.sap.lcr.api.cimclient.CIMOMClient.enumerateInstancesImpl(CIMOMClient.java:443) 
at com.sap.lcr.api.cimclient.CIMOMClient.enumerateInstances(CIMOMClient.java:747) 
at com.sap.lcr.api.cimclient.CIMClient.enumerateInstances(CIMClient.java:980) 
at com.sap.lcr.api.sapmodel.JavaCIMObjectAccessor.enumerateInstances(JavaCIMObjectAccessor.java:211) 
at com.sap.lcr.api.sapmodel.SAP_SoftwareComponentAccessor.enumerateInstances(SAP_SoftwareComponentAccessor.java:204) 
at com.sap.lcr.api.sapmodel.SAP_SoftwareComponentAccessor.enumerateSAP_SoftwareComponentInstances(SAP_SoftwareComponentAccessor.java:239) 
at com.sap.aii.ibrep.server.sldaccess.interfaces.CRAccess.getSwcLinks(CRAccess.java:82) 
at com.sap.aii.ibrep.server.extobjects.SwcAccessor.getEoLinks(SwcAccessor.java:59) 
at com.sap.aii.ib.server.extobjects.EOAServiceImpl.getEoLinks(EOAServiceImpl.java:75) 
at com.sap.aii.ib.sbeans.extobjects.EOAServiceBean.getEoLinks(EOAServiceBean.java:66) 
at com.sap.aii.ib.sbeans.extobjects.EOAServiceRemoteObjectImpl1_0.getEoLinks(EOAServiceRemoteObjectImpl1_0.java:527) 
at com.sap.aii.ib.sbeans.extobjects.EOAServiceRemoteObjectImpl1_0p4_Skel.dispatch(EOAServiceRemoteObjectImpl1_0p4_Skel.java:232) 
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) 
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) 
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) 
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) 
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) 
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) 
at java.security.AccessController.doPrivileged(AccessController.java:219) 
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) 
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) 
 
############## 
 
Full Message Text 
 
An exception was thrown in the UME/ABAP user management connector. Message: Connect to SAP gateway failed 
Connect_PM TYPE=A ASHOST=localhost SYSNR=60 GWHOST=localhost GWSERV=sapgw60 PCS=1 
 
LOCATION CPIC (TCP/IP) on local host with Unicode 
ERROR partner '127.0.0.1:sapgw60' not reached 
TIME Thu Feb 23 07:28:06 201 
RELEASE 700 
COMPONENT NI (network interface) 
VERSION 38 
RC -10 
MODULE nixxi.cpp 
LINE 2513 
DETAIL NiPConnect 
SYSTEM CALL connect 
ERRNO 79 
ERRNO TEXT A remote host refused an attempted connect operation. 
COUNTER 16

How to get the job logs from sm35 by using the queue id and session name?

hi all,
can any one please let me know how to read the job log from sm35 by using the session name and queue id. i have the job name and job count but is it possible to download the job log by using the queue id and session name.
FYI..
i want to read this job log and i want to send it to an email id.
-> i am using the job_open and submitting the zreport via job name and job count and then i am using the function module job_close.
but this is not working in my scenario i have the queue id and session name by using this two i want to get the job log is there any function module available or code please provide me some inputs.
thanks in advance,
koushik

Hi Bharath,
If you want to download it to the local file then you can follow the instructions in the below link.
How to download Batch Input Session Log?
Regards,
Sachin

How can I fake my FROM email address to look like I'm sending it from work?

I want to not have to log into my work webmail everyday and I want to just use MobileMe. I have all my work mail forwarded to MobileMe. The problem is that I don't want to ever have to log into work mail to send a message. How can I fake my from email address to look like I'm sending it from work?

You can't do that with MobileMe. MobileMe's mail servers will only accept senders from their own domains (@mac.com and @me.com). No other senders, not even from configured personal domains, will be accepted.
You will either have to use your companies SMTP server or, if not public available, your companies webmail.

Send logs from c370 to m160

Similar Messages

Maybe you are looking for