Send logs to syslog

How to send weblogic server ---- access.log,server.log,server.out to sys log on solaris.

The router does not have the feature where you can save the logs to a notepad, why not click on Open in Browser and then copy and paste the results to a notepad or wordpad so that you can go ahead and send it thru email.
Please check link below how to enable logs in the router:
Title: Enabling the Logs feature of the Linksys Smart Wi-Fi Router using local access
Article ID: 26579

Similar Messages

Enable syslog debug level 7 and send logs to syslog

Hi,
on cisco ASA, I've to enable syslog debug level 7 and send logs to syslog. how to do that?

Unless you have been fiddling with logging levels previously, most ACE's will be using the cisco default logging, and at debug/7 level most of those will generate syslog entries. Don't forget that "show access-list" will show hits counts for the individual entries as well, independently of any syslog output.
Lastly, if a reload is an option, in your situation what I would do if modifying 3k lines was needed is:
1) copy startup-config a.txt
2) export a.txt by TFTP or SSH or USB or whatever
3) edit the configuration using offline tools with regular-expression capabilities such as textpad (windows) or vi or emacs or perl or ...
4) import the revised b.txt config
5) copy b.txt startup-config and reload
-- Jim Leinweber, WI State Lab of Hygiene

EA4500: how to send logs to syslog or via email?

Hello,
I absolutely need to collect the router logs and send them to a syslog daemon or via email.
How xan I achieve that?
Thanks

The router does not have the feature where you can save the logs to a notepad, why not click on Open in Browser and then copy and paste the results to a notepad or wordpad so that you can go ahead and send it thru email.
Please check link below how to enable logs in the router:
Title: Enabling the Logs feature of the Linksys Smart Wi-Fi Router using local access
Article ID: 26579

Sending Logs to Multiple Syslog Servers

Hi Team ,
is it doable to send log messages recorded on various cisco devices to multiple syslog servers by discriminating the severity level ?, for example I want to send all the critical and alerts logs to x.x.x.x server, but for other severities, I want to send the logs to y.y.y.y server.
Thanks.

Hi Team ,
is it doable to send log messages recorded on various cisco devices to multiple syslog servers by discriminating the severity level ?, for example I want to send all the critical and alerts logs to x.x.x.x server, but for other severities, I want to send the logs to y.y.y.y server.
Thanks.

How to configure IPS 4240 - K9 to send log file to syslog server

I am looking for the commands in how to configure IPS 4240-k9 to send log file to SYSLOG server. If anybody has or came across similer issue please advice.
Thanks in advanced.

Ali -
I am sorry to tell you, but the Cisco IPS Sensors do not send Syslog messages. Your only options for sending signature event information are:
SDEE (an TLS Encrypted XML formatted message) the sensor is the SDEE Host and your event receiver (MARS, IME, Intelitactics, etc) is the client.
SNMP Traps - You need to set the "Action" on each signature you want the sensor to send a trap.
- Bob

Trouble in Syslog Validation (send log)

I am doing a project to to capture the Syslog from the switches and routers, so for most of devices i can generate the syslog by giving the command " send log" and so that i would receive the same locally as well in the tool.
Note : These devices are in production.
We have a monitoring tool " Stablenet v6.72" i think syslog is also the same(same utility in Stablenet)
The problem iam facing is, for many devices i am not able to give the test command as they are running an IOS c3560-ipbase-mz.122-25.SED1.bin.
I have configured the syslog server on all the devices and there is reachability and port 514 is opened though,
I do make you know that we have many firewalls in the network and i belive tat all the devices have reachability to the Syslog server, ( My firewall blocks the Ping traffic and traceroute traffic) so i unable to find out which firewall blocks.( if it is so)
Please let me know how do i validate remaining 1200 devices. :(
Please help me,
Nithin M

Hi Nithin
my advice is to issue a command on each device that will initiate a syslog message. At least this way you can be sure its working, since you will always expect the same kind of syslog message. I know for example if you have the syslog severity set to level 5 you will get "configuration change" messages. To set your level enter this command:
'logging trap notifications'
And then , by entering into config mode ( "conf t" ) as well as exit out of config mode a CONF_I syslog message will be sent immediately as you exit out configuration mode.
hope it helps.
Cheers
Pierre

How to configure WLS to send HTTP access log to syslog under Solaris?

I understand there is a way configuring WLS to use syslog via log4j. Is it possible only to direct HTTP access logs to syslog and keep the rest of logs in normal log files? Thanks!

I've been following the "How to do UD Document" https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff and more specifically the document for Sybase https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0d70315-958f-2a10-bc88-eb91e36f4037
I am using the latest .jar file from Sybase http://www.sybase.com/detail?id=1002257
When I navigate to http://<hostname>:50000//TestJDBC_Web/TestJDBCPage.jsp and Select connection name SDK_JDBC I get the following error message:
Could not connect to database. Connection is inactive or does not support JDBC
com.sap.ip.bi.sdk.exception.BIConnectionFailedException: Cannot open the connection
Caused by: com.sap.ip.bi.sdk.exception.BIResourceException: Class DriverName is not found
Caused by: java.lang.ClassNotFoundException: com.sybase.jdbc2.jdbc.SybDataSource
Found in negative cache
Loader Info -
ClassLoader name: [connector:default]
Parent loader name: [Frame ClassLoader]
library:SYBASE
Resources:
   /usr/sap/BWD/JC02/j2ee/cluster/server0/apps/sap.com/com.sap.ip.bi.sdk.dac.connector.sapq/connector/connectors/bi_sdk_sapq.rar/bi_sdk_sapq.jar
   /usr/sap/BWD/JC02/j2ee/cluster/server0/apps/sap.com/com.sap.ip.bi.sdk.dac.connector.jdbc/connector/connectors/bi_sdk_jdbc.rar/bi_sdk_jdbc.jar
   /usr/sap/BWD/JC02/j2ee/cluster/server0/apps/sap.com/cafbwadapterassembly/connector/connectors/cafbwadapterassembly.rar/sap.comcafbwadaptercaf.bw.adapter.jar
   /usr/sap/BWD/JC02/j2ee/cluster/server0/apps/sap.com/com.sap.ip.bi.sdk.dac.connector.xmla/connector/connectors/bi_sdk_xmla.rar/bi_sdk_xmla.jar
Loading model: {parent,references,local}
Any thoughts/insites?
Thanks, Steve

Weblogic logging to syslog?

Hi All.
I have a setup in which:
- applications deployed in weblogic send logs to weblogic;
- components of weblogic (domain, admin server, managed servers) log to proper files (default logging).
I would like to connect logging to syslog server. Is it possible? As I have read it is possible to log from applications with log4j (on weblogic level with domain_root/lib/log4j.xml or log4j.properties) if they send logs to weblogic server. But is it possible to log from weblogic components to log4j and through it to syslog?
There is much info on the web and I'm quite confused. Thanks for all help.
Best regards,
Rafal.

Basically syslog configuration is very easy with logging host x.x.x.x. But more options that you need to be aware of.
1)Router# configure terminal--Enters global configuration mode.
2)Router(config)# service timestamps type datetime [msec] [localtime] [show-timezone]--Instructs the system to timestamp syslog messages;
3)Router(config)#logging host--Tells the syslog server by IP address or host name; multiple servers also can be specified.
4)Router(config)# logging trap level--severity level. The possible values for level are as follows:Use the debug level with caution, because it can generate a large amount of syslog traffic in a busy network
Emergency-0
Alert-1
Critical-2
Error- 3
Warning- 4
Notice- 5
Informational- 6
Debug- 7
Router# show logging--Showslogging configuration.

Send logs from c370 to m160

Hello
I would like to pass the logs and the quarantine from the c370 to the m160
I read the manual and the logs I think I know how to do it but I want to be sure.
in the "system administration" on the "log subscription" i have to select the log and syslog push or scp push. not quite sure.....
and for the quarantine I log on the M160 and then go to "managemente appliance" then "centralized services" and I select " Spam Quarantine".
but as above I am not sure.
to resume
i want to send logs and the quaratine from the c370 to the m160.
Regards.

Hi,
for pushing the logs from the C370 you will need to configure the SCP host in the log subscriptions and specify a directory on the M-Series.
For enabling the centralized ISQ, yes you need to add the C370 in the M-Series configuration. Go to "Cenetralized Services - Security Appliances" and click on "Add Email Security Appliance". On the C370 configure the external quarantine under "Security Services - External Spam Quarantine" and disable the local Spam quarantine under "Monitor - Quarantines".
Best regards,
Enrico

Linksys "Send log to:" support in Leopard?

Is there any way to get a Linksys router log capured by OS X? I can "Send log to:" my IP address, but how can I get it captured? Kiwi Syslog Daemon is a Windows only application; if there were a Mac equivalent I could use KiwiLogViewer-OSX to see the Linksys data. Thanks for any ideas.

Yes, that is exactly the purpose of syslogd.conf.
The syslog protocol has what is called 'log levels' and then severity levels. You can use these values to filter off things to different files.
So for instance, if you configured your router to send syslog data as local7.crit, you can either filter that off to a critical file or just do local7.* to send all traffic on that level to another file.
The configuration of syslog hasn't changed in AGES. Starting it by default, I agree, is going to be different in Leopard. However, manually getting it to function is the first step before automating its startup.
Since it's already running, you'll want to kill syslogd (sudo killall syslogd) and then restart it with the necessary parameters to start listening on the network.
netstat -anp udp | grep 514
... will tell you if it's listening on the network or not. When that command returns data (probably say udp4 0 0 *.514) you then then try hitting it from your remote device.

Sending log data to two different files using log4j

Hi,
Can some one please help me with my problem I have here?
I want to send log data to two diffrent files depending on the logging level such as DEBUG and WARN.
How can you configure this in log4j.properties.
Please post sample code for log4j.properties to achieve this.
Thanks in advance.
rsreddych

Hi,
Finally, I found the solution to this problem my self.
What you need to do is define two loggers in the application, and set two priority levels to these loggers and define two out put files to these loggers. Deploy the war file, restart application server and you are good to go.
This seems to be working for me. Only glitch I found is, the out put in
the second file is displaying one space character at the start of line starting from second line (First line don't have this problem). This is odd. It may be because of my faulty code. Any how thanks for you all.
rsreddych

On a GSS-4492-K9 what does the error logs or syslog messages mean ?

Hi,
I have a GSS-4492-K9 and have when i view the logs or syslog output. I cannot seem to find much information on CCO regarding the error. say for example, of the many errors i can see in the logs,the below is one. However, cannot decode what this means.
CRM-5-GSS-MAIN
CRD-4-STICKYCOMMERREOF[11813] EOF
Is there link on CCO explaning all the common log messages on the GSS as we have on the IOS platform for easy diagnosis?
I am also looking for error message explanations under syslogs, CRM, KAL, KALE, CRDIRECTOR if there are any ?
Kind regards,
Dayo.

The direct logic driver WILL NOT work with Windows 7, and Automation Direct says they are not upgrading the driver to work with windows 7 .
We are in the process of moving to NIOPC Servers for our DirectLogic PLCs. So far, the move has been going well.
Jason Phillips

Sending log files for scheduled jobs as attachment through mail

Hi All,
Can any one please help me out to write a pl/sql program to send log files for scheduled jobs as attachment through mail.
Thanks.

Why would anyone do that as this code has already been posted here a thousand times, it is all over the Internet, and the only thing you need to do is to search for it?
I agree it would cost you some effort, but you are getting paid for it, and we are not getting paid for delivering it on a golden plate on your doorstep, as you can not be bothered to use online resources.
Sybrand Bakker
Senior Oracle DBA

WLC-5508 logging to syslog

It appears that there are two different types of log information generated by the WLC-5508. The stuff that can be sent directly to syslog seems to be very basic while most of the good log information is sent via snmp trap. Does anyone have this setup to log to a SIEM in a manner that gives a good security view into the wireless controller?

Mike,
Have you tried to change the logging level on the wlc? There are multiple levels of logging that can be set on the wlc. On the wlc GUI, you can check the current logging level by navigating to this page - Management > Logs > Config > Syslog Server. Under the "Syslog Server", you can change the level of logging.　
If you set a logging level, only those messages whose severity is equal to or less than that level are logged by the controller. Note that setting a higher logging level on the wlc might result in more logs sent to the syslog server.
Regards,
Nagendra

FFLOGCRT Send Log Report with Critical Transactions Only

Hi ,
I have configured FF (SPM) where in Controllers are getting FF ID login notifications through Emails. Now I have a requirement to stop these notifications and send them only for critical transactions.I have configured critical transactions in table /VIRSA/ZVIRTCODE.
In order to get notifications only for critical transactions I have updated the configuration as below.
CHGLOG Retrieve Change Log     YES
FFAUTH Firefighter Owner Additional Authorization     YES
FFCNTL Firefighter Controller Additional Authorization     YES
FFLOGCRT Send Log Report with Critical Transactions Only     YES
FFLOGIM Send Log Report Execution Notification Immediately     NO
FFLOGNOTI Send Log Report Execution Notification     NO
FFNOTIM Send Firefighter Login Notification Immediately     NO
MAIL Send FirefightId Login Notification     NO
RFC Remote Function Call     LOCAL
My controllers are not getting notified for critical transactions with above config. Please can you suggest where am I going wrong.
SOST/SCOT working fine.
ps: I have gone through the note Note 1065048 - Firefighter Log Not sent in Email to Controller.pdf
Thanks!!
ARD
Edited by: Abhijeet Deshmukh on Sep 17, 2010 5:20 PM

Hi Simon,
I am not using risk analysis and remediation's critical transactions table. My FF (SPM) specific crtitcal transactions are in table
/VIRSA/ZVIRTCODE.
CTRAN Critical Transaction Table from Compliance Calibrator(VRAT)     NO.
I am under impression that table /VIRSA/ZVIRTCODE is used by FF for critical transactions.
Thanks!!
ARD

Send logs to syslog

Similar Messages

Maybe you are looking for