Send mail at a specific time?

Is there any way with mail that I can write and email and then have the program send it at a specific time or date?
Thanks.

Anyone?

Similar Messages

Sending Messages at a Specific Time?

Does anyone know if there's a way to keep outgoing messages in your Outbox and not send them immeadietly without Saving for Later?
Sometimes I'll write an email late at night, but don't want it to send until say 8 a.m. Is there a way to set the message not to send until then or to tell the outbox to send mail at a specific time?
Perhaps a way to set Automator to send the messages at a speciifc time?
MacPro Mac OS X (10.4.8)

I laughed because I found the Mail Scripts, and was just about to reply, when I saw that you had posted the answer already, Austin! I'm glad I know about those scripts--they'd be useful for many people who use Mail.
Well, there you go, bdiesel, question fully answered!
All the best.
Power Mac G5 1.8GHz DP, 1.5GB RAM Mac OS X (10.4.8)

HT2500 without changing settings, iMac mail V4.6, 1)will not save password 2)takes accounts offline 3)will not except password 4)will not send mail from accounts every time.     What happen?

without changing settings, iMac mail V4.6, 1)will not save password   2)takes accounts offline 3)will not except password   4)will not send mail from accounts every time.
    What happen? How do I correct this?

Hi Nuch1,
I found an article that is contains very thorough Mail troubleshooting steps:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
You can use that article to figure out what part of the email "ecosystem" is the cause of the issue, and it can also help you attempt to resolve it.
Hope that helps,
David

Sending mail take too long time exchange 2011 in iphone4

when i try to sending mail take too long time.
stay long time in outbox folder.
i'm using exchange 2011 in iphone4 with latest updates.

Hi,
This is a characteristic of some, but not all, ISPs, and not the SMTP itself. It involves DNS. See:
http://discussions.apple.com/thread.jspa?messageID=10391853&#10391853
Ernie

TS3899 cannot send mail without restarting every time IPad is shut down (IPad air)All other mail functions work properly

Cannot send mail withoout IPad restart after every IPad shutdown. All other fuunctions of mail work properly.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Delete Email on the iPad
http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
How to Mass Delete Emails from iPhone and iPad Inbox (with video)
http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Can't send mail; but only some times

Since I updated my computers to Tiger I have the same problem on all of them.
Mail doesn't send mail, I have to quit and try again and again until it does. Read all articles about similar problems but non of them helped. As far I understand there is something going on with the port 25, but then, why some times it works some times doesn't?
Maybe I just switch to Thunderbird, but that's also a pain because Mail doesn't let one simply import to another mail program.

What does “Mail doesn't send mail” mean? What’s the problem exactly? What error messages do you get, if any? Are this mail account and the associated outgoing (SMTP) server provided by your ISP or by someone else? More info, please.

Finding all SharePoint objects (alerts, workflows, etc) configured to send mail to a specific user

Hi all,
I'm looking at the mail traffic originating from our SharePoint instance and noticed there are a number of "delivery has failed to these recipients or groups" for people no longer with us.
Is there a means (powershell?) to discover the objects (alerts, workflows, etc...) in SharePoint that are sending mail to these people so they can be removed as part of old account housekeeping?
Thanks!
Paul

Hi
Please checkout below script to remove the alerts enabled for individual users.
http://dunxd.com/2010/12/22/delete-all-alerts-for-a-user-in-sharepoint-with-this-powershell-script/
You can verify the content of emails which will have names of users and kind of emails , if that is aa workflow approval or simple alerts. if its workflow alert you might need to contact the sharepoint administrator/designer who can find
out the source of same
regards Puran Mishra

Unable to Send Mail to a Specific Domain

I've searched the forum but found no answers.
I have a new iMac and a MacBook, both running 10.5.1
The email settings are identical on both computers (I checked many times over).
I can send an received mail on the MacBook, but can only receive email on the iMac.
Well - SOMETIMES, it will send email on the iMac. The majority of the time I get the message where I can select another outgoing email server (I have only 1) - I use the connection test, and everything shows OK. What gives??
UPDATE:
After some trial and error - I am finding that I cannot email to people with a certain domain. For example, My ISP is Cox.net (and so is my email) - and I cannot email to myself or anyone @cox.net. I can email out to people with Gmail email address though. I am confused even more now...
I have no one in my address book. Is it possible that some sort of corruption has occurred related to certain email addresses? If so, how would that be fixed?
ANOTHER UPDATE:
I found that if I select "remove from previous recipients list" for my own email address, I was able to send an email to myself.

On my MacBook (10.5.1) the port setting is in Preferences>Accounts>Advanced. It's grayed out on mine, why I don't know. I migrated settings from my iMac (running Tiger) when I bought it, and haven't tinkered with it at all. My settings also include password authentication. As I said, I've used it at a several airport lounges overseas, without any problems.

Not able to send mail in a custom timer job

Hi,
I have implemented a custom timer job to send a mail when a list data field is equal to the current date.
I have debugged the code in VS and it is executed correctly if I am using it in a button click event of a webpart .
But problem is its not sending the mails while I am appling the same code as a timer job.
Can somebody help me out?
BR,
Sudhir

Hi Sudhir,
I agree with Martin, you definetly need to log what happens inside the timer job.
I suggest to always use a try / catch block within the methods of your assembly, and trace out (using System.Diagnostics.Trace, http://msdn.microsoft.com/en-us/library/system.diagnostics.trace.aspx and its methods for example, TraceInformation http://msdn.microsoft.com/en-us/library/system.diagnostics.trace.traceinformation.aspx) the exceptions if happen. Also, it is good practice to trace out each entry and exit points. Use the WinDbg (http://msdn.microsoft.com/en-us/library/cc266321.aspx, http://windbg.dumpanalysis.org/) to catch the output.
You can redirect the trace output to file (see <listeners> Element for <trace> http://msdn.microsoft.com/en-us/library/zh3a61fw.aspx, and Trace Listeners http://msdn.microsoft.com/en-us/library/aa983739(VS.71).aspx)
You can even write your log messages to SharePoint Unified Logging System as described here:
SharePoint: Writing messages to ULS (Unified Logging System)
http://weblogs.asp.net/gunnarpeipman/archive/2009/02/25/sharepoint-writing-messages-to-uls-unified-logging-system.aspx
Peter

Incoming mail for a specific time period

Is there a powershell command to give me either a report or list of email RECEIVED to my mailbox between specific dates and times:
Say I wanted to see ALL my email received in my in individual mailbox from: 2-23-2005 at 6:00 AM to 2-24-2005 12:00 PMAll I can find is criteria that gives me mail from or to a specific person.
Ant help would be appreciated.
RJM

Assuming the items are in the inbox there is this:
New-MailboxExportRequest -Mailbox MyMailbox -IncludeFolders "#Inbox#" -ContentFilter {(Received -ge '02/23/2005 00:06:00') -and (Received -lt '02/24/2005 12:00:00')} -FilePath "\\server\C$\PST-Exports\exported.pst"
That one above won't remove the items from the mailbox, it just dumps a copy out into a PST.
I have had trouble with this one below trying to get it down to the minute but you can get a report sent to another mailbox with this:
Search-Mailbox -Identity MyMailbox -TargetMailbox SomeMailbox -TargetFolder “test” -SearchQuery '(Received:02/23/2005..02/24/2005)' -LogOnly -LogLevel Full
That search-mailbox one goes by UTC time for some reason so it misses some hours based on how far off from UTC you are and as I mentioned I haven't been able to get it to work entering the time, just the date.
These commands look at what email you have now. If you deleted an email, it will not show up. The message tracking logs will show you every email you received/sent.
CRM Advisor

JavaMail - send mail on a specific date

Is it possible to send a mail on a particular date? Does JavaMail support this option?
My application has to send a mail to the recipients 24 hours after the user press the "send" button. I searched the forum and the only solution I found was to use threads. This solution isn't good for me (since the user can shutdown his computer during this time).
Does anyone know another solution? or has another idear?

I do not know of any feature in the e-mail protocol (not just Java's implementation of it) that would support this.
However, instead of sending the e-mail from the client, could you just send a request to a server and have the server send all e-mails when they are due? There would still be the problem of the server being down and any delay in the actual routing of the message but these issues will probably always exist due to the design.

Send mail at a specified time

i all
Is it possible to send a mail item automatically at a set time?

I tried using "Andreas Amann's Mailscripts" and they did NOT work. I even emailed him and said that I would pay him to rewrite his Apple Scripts for OS 10.5.8, so that they will work. He sent me an email a few days later and said that he had resolved the problems for OS 10.5.8 and all worked perfectly. So I down loaded them, installed them, tried them once and they worked, so I sent him $20 for his efforts. However, the Apple Scripts only worked about once every 15 to 20 attempts. He and I had several emails back and forth - I did what I was instructed to do but the scripts still would not work. I think he meant well but the result was not dependable.
I wish Apple would pay a little more attention to work productivity requests. Especially now that Apple is bigger and stronger than ever. Apple PLEASE invest a little more time in “BUSINESS” software development. Microsoft has been able to provide an email “Scheduled Delivery” feature for years. Why can’t you? We need this feature.

Send mail to a specific user group when an Inbound Idoc processing fails

I am using standard Message type DEBMAS, but the process code is customed (say ZDEBM as the function module is customed). Can you tell me what configurations are required to activate the error notification message to a user when the inbound idoc fails?

hi,
i think u need to check tcode swu3 for automatic workflow customizing and check in we40 (error AND STATUS PROCESSING) whether the processing code is assigned to the workflow task.
if it is assigned,the workflow will be automatically triggered and the mail will be sent to the user by itself.
ALE error handling uses workflow. A standard task is provided for each message type. Task TS20000051 is used for all BAPIs.
Workflow functions as follows:
A task (work item) is generated for the error handling and stored as a message in the inboxes of the employees responsible.
If one of these employees processes the work item, the standard task method for error handling is started. The user can, for example, restart IDoc processing.
If the IDoc is processed successfully, the work item is deleted from the inboxes of all the employees involved.
For this procedure to function, the employees responsible for a particular message type and partner (sender or receiver) must be defined as follows:
1. A hierarchy of organizational units (for example, "sales office") and positions (for example, "customer officer for customer X") is created and employees are assigned to it.
2. The standard tasks for error handling (for example, an error related to an inbound sales order) are assigned to the relevant organizational units or positions (for example, "sales office").
3. The organizational unit, position or employee responsible for dealing with the error are specified for each partner and message type in the partner profiles.
If an error occurs, the system determines:
1. The employees responsible using the staffing schedule of the organizational unit or position linked to the standard task.
2. The employees defined in the partner profiles (using position, user ID, or organizational unit).
3. The employees appearing in both groups represent those who will receive a work item in their inboxes.
regards,
pankaj singh

Idoc mail notification on specific time

Hi All
I need some suggestions regarding email notification.
I have a requirement where idocs alerts should be send to specific users twice a day (07:00am and 15:00).
I know two solutions for email auto-reaction (CCMS and BPMON).
If i´m not mistaken, CCMS auto-reaction can be triggered in two ways (one via background job which runs every hour and the other one which triggers every 5 mins). For BPMON, i haven´t tried this solution but looking on the "notification" window, there are no options to choose when it will send. And only the data collection schedule on BPMON is customizable.
Any suggestions for this requirement?
Thank you in advance.
Regards,
Florence

Hi
Are you facing the problem only for this particlualr MTE? auto reaction methods are working fne for other MTES?
if no, might be you missing some configuration, please go through this RKTS,
[/docs/DOC-9001#section7 [original link is broken] [original link is broken]|/docs/DOC-9001#section7 [original link is broken] [original link is broken]]
else if you face problem in particular MTE, please try to assign the MTE auto reaction method from RZ20 itself,
steps are here [http://help.sap.com/saphelp_smehp1/helpdata/EN/ac/825f18c02e454dac8da51f4eb22265/content.htm|http://help.sap.com/saphelp_smehp1/helpdata/EN/ac/825f18c02e454dac8da51f4eb22265/content.htm]
Thanks,
Jansi

Unable to send mail to some addresses after move to Leopard

I am not sure, whether I am in the right forum with my question. If not, please tell me where I should go.
I am traveling a lot for work and have clients in many countries. Since 2004, I have been using Mac laptops and have not encountered any problems sending mail through clients' LANs, from my own place to clients, or from any number of hotels to clients. I migrated from Tiger to Leopard on the day the latter OS became available.
Since the move, I am experiencing a problem sending mail to one specific client. I can no longer send mail to my various contacts within that client's premises (all of whom share the same domain name) from outside. I also cannot send mail to any of those contacts when I am hooked up to the client's network (but not the domain) whilst within the client's premises.
I use Mail and a mac.com address. I do not use web-mail. It is further noteworthy that messages from my side without attachments will sometimes (perhaps 20% of the time) go through. However, messages with attachments never go through. I have discussed the matter at length with the two IT-experts at the client (a government office) and we have not been able to come up with suggestions.
Since I am now forced to use a USB-stick to exchange info with my client, I would much welcome your suggestions as to the cause of the problem and possible solutions. Many thanks in advance.

Thank you for taking up the issue, Type17. The mails do not disappear, they remain in my outbox (on my Mac). The intended recipient does not get a message. I, for my part, see a box with the message 'Cannot send the message using the server 'smtp.mac.com: myloginname'. The server name is highlighted in blue in a box below and I get the choices: 'Edit message', 'Try later' and 'Try with selected server'. None of these resolves the problem. The last option, i.e. 'Try with selected server', is a bit strange, because pressing the button 'Edit server list', shows only the server already mentioned. I have tried 'Connection doctor' several times over the past months, but this consistently gives me a green light against the smtp and the message: 'Connection and login to server successful'.

Send mail at a specific time?

Similar Messages

Maybe you are looking for