Send mail by zip file format..

Hi ALL,
I have a one problem in sending mail through SAP. I have file with more than 5MB in pdf format, this file i am unble to send. but below 5MB its successfully sending.
so i m doubt is i have to zip the file, means if that file is more than 5MB.
please any one tell me for above problem.
Thanks,
Srinivas.

Take a look to the class CL_ABAP_GZIP.
Regards.

Similar Messages

How to send mail with zip file

Hi,
We are sending email in one of our program with an attached xls file. We are sending email using classes (cl_bcs).
Our requirement is to send the attached file in zip format to reduce the size.
Please provide if you have any pointers to get zipped file in attachment.
Regards,
Mamta

Dear Mamta,
Check this class,
CL_ABAP_GZIP                               -- Class for (De)Compression (GZIP)
CL_ABAP_GZIP_BINARY_STREAM -- Class for Data Compression (GZIP, Streaming)
CL_ABAP_GZIP_TEXT_STREAM       -- Class for Text Compression (GZIP, Streaming)
IF_ABAP_GZIP_BINARY_HANDLER -- IF for Output Buffer Handler
IF_ABAP_GZIP_TEXT_HANDLER      -- IF for Output Buffer Handler
Regards,
Surjith

I receive many e-mails with zipped files. In the past few weeks I can no longer open them as I used to. I get a window welcoming me to the Application Loader. ( What is an Application Loader?) It says I need my iTunes Connect login, but when I try my

I receive many e-mails with zipped files. I can no longer open or unzip my files. A window welcoming me to Application Loader drops down. It prompts for an iTunes Connect login, but will no accept my iTunes login. I have no way to open or unzip my files. Help!!!!

Application Loader, unless there's another one I'm not familiar with, is part of the iOS SDK. That have usurped the .zip, or you may have removed that application but your Mac is still holding onto the mapping of Zip files to that application. Select a .zip file in Finder, Get Info, and go to the Open with section. Select Archive Utility and click Change All. That should fix the problem.
Regards.

Send mails with csv file as an attachment through oracle(SQL SCripts / Stor

Hello Everybody,
I have recently come across a requirement in which I am supposed to send mails with csv file as an attachment through oracle(SQL SCripts / Stored Procedure) .
The contents of the csv file are to be retreived from the Database as well as the content of the mail and to whom it needs to be sent has also to be picked up from the database.
Can somebody suggest me with a suitable code for the same?
Would be of great help..!!
Thanks & Regards,
- VR
Edited by: user646716 on Dec 18, 2009 10:44 AM

read below links
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:255615160805
http://www.orafaq.com/wiki/Send_mail_from_PL/SQL#Send_mail_with_UTL_TCP_-withattachments
How to send csv file as an attachment

Convert Screen(spool) to PDF file sending mail with attach file

Hi :
I'd like convert spool list to pdf and sending file...
so, I read thread about spool convert to PDF before,
and know how to convert Spool to PDF file and send mail with attach file.
but I have a problem.
my solution as:
step 1. Call function: "CONVERT_ABAPSPOOLJOB_2_PDF"
step 2. Call function: "SO_NEW_DOCUMENT_ATT_SEND_API1"
then, I got a mail with attached PDF file, but the PDF file display limited 255 line.( SO_NEW_DOCUMENT_ATT_SEND_API1 limited)
I want to showing word is wider that 255.
and then I find a manual method as:
After program finished.
Function Menu -> system -> List -> Send
use Prog: "Create Document and Send"
I use this prog sending mail and attached file ,
PDF file do NOT have 255 word limit !
finally. my question is, If I want sending mail as Prog: "Create Document and Send", how to do?
which Function I have to use?...
Please help me, Thanks!

Hi,
Check this sample code of sending spool as attachment to an email address..
Parameters.
PARAMETERS: p_email(50) LOWER CASE.
PARAMETERS: p_spool LIKE tsp01-rqident.
Data declarations.
DATA: plist LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: document_data LIKE sodocchgi1.
DATA: so_ali LIKE soli OCCURS 100 WITH HEADER LINE.
DATA: real_type LIKE soodk-objtp.
DATA: sp_lang LIKE tst01-dlang.
DATA: line_size TYPE i VALUE 255.
DATA: v_name LIKE soextreci1-receiver.
DATA rec_tab LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
Get the spool data.
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
 EXPORTING
 rqident = p_spool
 first_line = 1
 last_line = 0
 desired_type = ' '
 IMPORTING
 real_type = real_type
 sp_lang = sp_lang
 TABLES
 buffer = so_ali
 EXCEPTIONS
 no_such_job = 1
 job_contains_no_data = 2
 selection_empty = 3
 no_permission = 4
 can_not_access = 5
 read_error = 6
 type_no_match = 7
 OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE s208(00) WITH 'Error'.
LEAVE LIST-PROCESSING.
ENDIF.
Prepare the data.
plist-transf_bin = 'X'.
plist-head_start = 0.
plist-head_num = 0.
plist-body_start = 0.
plist-body_num = 0.
plist-doc_type = 'RAW'.
plist-obj_descr = 'Test ALV'.
APPEND plist.
plist-transf_bin = 'X'.
plist-head_start = 0.
plist-head_num = 0.
plist-body_start = 1.
DESCRIBE TABLE so_ali LINES plist-body_num.
plist-doc_type = real_type.
Get the size.
READ TABLE so_ali INDEX plist-body_num.
plist-doc_size = ( plist-body_num - 1 ) * line_size
 + STRLEN( so_ali ).
APPEND plist.
Move the receiver address.
MOVE: p_email TO rec_tab-receiver,
 'U' TO rec_tab-rec_type.
APPEND rec_tab.
IF NOT sp_lang IS INITIAL.
document_data-obj_langu = sp_lang.
ELSE.
document_data-obj_langu = sy-langu.
ENDIF.
v_name = sy-uname.
Send the email.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
 EXPORTING
 document_data = document_data
 sender_address = v_name
 sender_address_type = 'B'
 TABLES
 packing_list = plist
 contents_bin = so_ali
 receivers = rec_tab
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE e208(00) WITH 'Error'.
ENDIF.
COMMIT WORK.
Send the email immediately.
SUBMIT rsconn01
WITH mode = 'INT'
AND RETURN.
Thanks,
Naren

Sending mail without attachment file

Hi Sapfans:
I would like to send mail without attachment file, just a notice,
needing multiple receiver, can change the mail title,
Which function shoud I use?
I just found out sending mail with attachment file there,
Thanks a lot!

Hi Alchie,
Please take a look at my example below. It sens e-mail to multiple recipients without attachments.
FUNCTION-POOL zts0001 MESSAGE-ID sv.
INCLUDE lsvimdat . "general data decl.
INCLUDE lzts0001t00 . "view rel. data dcl.
*/ Author: Aris Hidalgo
*/ Created on: September 7, 2006
*/ Purpose of program: This will send out e-mails to specified users in
*/ custom table ZSHIPTO_EMAIL whenever records have been deleted or
*/ modified via the maintenance view of ZTS0001. The changes will also
*/ be reflected in custom table ZTS_STPGEOLOC.
TABLES: zts_stpgeoloc,
 zshipto_email,
 kna1.
FIELD-SYMBOLS: <fs_old_total> TYPE ANY.
* CLASS lcl_main DEFINITION ABSTRACT
CLASS lcl_main DEFINITION ABSTRACT.
PUBLIC SECTION.
 TYPES: BEGIN OF t_zts0001_old,
 kunnr TYPE zts0001-kunnr,
 cdseq TYPE zts0001-cdseq,
 zaddress TYPE zts0001-zaddress,
 zcperson TYPE zts0001-zcperson,
 zcnumber TYPE zts0001-zcnumber,
 END OF t_zts0001_old.
 TYPES: BEGIN OF t_zts0001_new,
 kunnr TYPE zts0001-kunnr,
 cdseq TYPE zts0001-cdseq,
 zaddress TYPE zts0001-zaddress,
 zcperson TYPE zts0001-zcperson,
 zcnumber TYPE zts0001-zcnumber,
 END OF t_zts0001_new.
 TYPES: BEGIN OF t_zts_stpgeoloc,
 kunnr TYPE zts_stpgeoloc-kunnr,
 cdseq TYPE zts_stpgeoloc-cdseq,
 zaddress TYPE zts_stpgeoloc-zaddress,
 zcperson TYPE zts_stpgeoloc-zcperson,
 zcnumber TYPE zts_stpgeoloc-zcnumber,
 END OF t_zts_stpgeoloc.
 TYPES: BEGIN OF t_del_entries,
 kunnr TYPE zts0001-kunnr,
 cdseq TYPE zts0001-cdseq,
 zaddress TYPE zts0001-zaddress,
 zcperson TYPE zts0001-zcperson,
 zcnumber TYPE zts0001-zcnumber,
 name1 TYPE kna1-name1,
 END OF t_del_entries.
 TYPES: BEGIN OF t_modified_entries,
 kunnr TYPE zts0001-kunnr,
 cdseq TYPE zts0001-cdseq,
 old_address TYPE zts0001-zaddress,
 new_address TYPE zts0001-zaddress,
 old_person TYPE zts0001-zcperson,
 new_person TYPE zts0001-zcperson,
 old_number TYPE zts0001-zcnumber,
 new_number TYPE zts0001-zcnumber,
 name1 TYPE kna1-name1,
 END OF t_modified_entries.
 DATA: gt_zts0001_old TYPE STANDARD TABLE OF t_zts0001_old,
 gt_zts0001_new TYPE HASHED TABLE OF t_zts0001_new
 WITH UNIQUE KEY kunnr cdseq,
 gt_zts_stpgeoloc TYPE STANDARD TABLE OF t_zts_stpgeoloc,
 gt_del_entries TYPE STANDARD TABLE OF t_del_entries,
 gt_modified_entries TYPE STANDARD TABLE OF t_modified_entries,
 gt_zshipto_email TYPE STANDARD TABLE OF zshipto_email,
 t_maildata TYPE sodocchgi1,
 gt_mailtxt TYPE STANDARD TABLE OF solisti1,
 gt_mailrec TYPE STANDARD TABLE OF somlreci1.
 DATA: v_old_total TYPE i,
 v_new_total TYPE i,
 v_flag(1) TYPE c,
 v_counter(1) TYPE c,
 v_contents(255) TYPE c.
ENDCLASS.
* CLASS lcl_get_old_recs DEFINITION
CLASS lcl_get_old_recs DEFINITION INHERITING FROM lcl_main.
PUBLIC SECTION.
 METHODS: export_old_recs.
ENDCLASS.
* CLASS lcl_get_old_recs IMPLEMENTATION
CLASS lcl_get_old_recs IMPLEMENTATION.
METHOD export_old_recs.
 SELECT kunnr cdseq zaddress zcperson zcnumber
 FROM zts0001
 INTO TABLE gt_zts0001_old.
 v_old_total = sy-dbcnt.
 ASSIGN v_old_total TO <fs_old_total>.
 EXPORT gt_zts0001_old = gt_zts0001_old TO MEMORY ID 'AVH'.
 CLEAR gt_zts0001_old. REFRESH gt_zts0001_old.
ENDMETHOD.
ENDCLASS.
* CLASS lcl_old_and_new DEFINITION
CLASS lcl_old_and_new DEFINITION INHERITING FROM lcl_main.
PUBLIC SECTION.
 METHODS: compare_old_and_new.
ENDCLASS.
* CLASS lcl_old_and_new IMPLEMENTATION
CLASS lcl_old_and_new IMPLEMENTATION.
METHOD compare_old_and_new.
 DATA: wa_del_entries LIKE LINE OF gt_del_entries.
 FIELD-SYMBOLS: <fs_old> LIKE LINE OF gt_zts0001_old,
 <fs_new> LIKE LINE OF gt_zts0001_new.
 SELECT kunnr cdseq zaddress zcperson zcnumber
 FROM zts0001
 INTO TABLE gt_zts0001_new.
 v_new_total = sy-dbcnt.
 IF v_new_total <> <fs_old_total>.
 IMPORT gt_zts0001_old = gt_zts0001_old FROM MEMORY ID 'AVH'.
 LOOP AT gt_zts0001_old ASSIGNING <fs_old>.
 READ TABLE gt_zts0001_new WITH TABLE KEY kunnr = <fs_old>-kunnr
 cdseq = <fs_old>-cdseq
 ASSIGNING <fs_new>.
 IF sy-subrc <> 0.
 MOVE-CORRESPONDING <fs_old> TO wa_del_entries.
 APPEND wa_del_entries TO gt_del_entries.
 CLEAR wa_del_entries.
 DELETE FROM zts_stpgeoloc
 WHERE kunnr = <fs_old>-kunnr
 AND cdseq = <fs_old>-cdseq.
 ENDIF.
 ENDLOOP.
 IF NOT gt_del_entries[] IS INITIAL.
 EXPORT gt_del_entries = gt_del_entries TO MEMORY ID 'DEL'.
 ENDIF.
 REFRESH gt_zts0001_old.
 ENDIF.
ENDMETHOD.
ENDCLASS.
* CLASS lcl_check_changes DEFINITION
CLASS lcl_check_changes DEFINITION INHERITING FROM lcl_main.
PUBLIC SECTION.
 METHODS: check_for_changes.
ENDCLASS.
* CLASS lcl_check_changes IMPLEMENTATION
CLASS lcl_check_changes IMPLEMENTATION.
METHOD check_for_changes.
 TYPES: BEGIN OF t_zts_stpgeoloc,
 mandt TYPE zts_stpgeoloc-mandt,
 kunnr TYPE zts_stpgeoloc-kunnr,
 cdseq TYPE zts_stpgeoloc-cdseq,
 zcgeoloc TYPE zts_stpgeoloc-zcgeoloc,
 zaddress TYPE zts_stpgeoloc-zaddress,
 zcperson TYPE zts_stpgeoloc-zcperson,
 zcnumber TYPE zts_stpgeoloc-zcnumber,
 END OF t_zts_stpgeoloc.
 DATA: wa_modified_entries LIKE LINE OF gt_modified_entries,
 lt_zts_stpgeoloc TYPE HASHED TABLE OF t_zts_stpgeoloc
 WITH UNIQUE KEY kunnr cdseq,
 wa_zts_stpgeoloc LIKE LINE OF lt_zts_stpgeoloc.
 FIELD-SYMBOLS: <fs_zts0001_old> LIKE LINE OF gt_zts0001_old,
 <fs_zts0001_new> LIKE LINE OF gt_zts0001_new.
 IMPORT gt_zts0001_old = gt_zts0001_old FROM MEMORY ID 'AVH'.
 SELECT kunnr cdseq zcgeoloc zaddress zcperson zcnumber
 FROM zts_stpgeoloc
 INTO CORRESPONDING FIELDS OF TABLE lt_zts_stpgeoloc.
 SELECT kunnr cdseq zaddress zcperson zcnumber
 FROM zts0001
 INTO TABLE gt_zts0001_new.
 LOOP AT gt_zts0001_old ASSIGNING <fs_zts0001_old>.
 READ TABLE gt_zts0001_new WITH TABLE KEY
 kunnr = <fs_zts0001_old>-kunnr
 cdseq = <fs_zts0001_old>-cdseq
 ASSIGNING <fs_zts0001_new>.
 IF sy-subrc = 0.
 READ TABLE lt_zts_stpgeoloc WITH TABLE KEY
 kunnr = <fs_zts0001_new>-kunnr
 cdseq = <fs_zts0001_new>-cdseq
 INTO wa_zts_stpgeoloc.
 IF sy-subrc = 0.
 wa_zts_stpgeoloc-mandt = sy-mandt.
 wa_zts_stpgeoloc-kunnr = <fs_zts0001_new>-kunnr.
 wa_zts_stpgeoloc-cdseq = <fs_zts0001_new>-cdseq.
 wa_zts_stpgeoloc-zcgeoloc = space.
 wa_zts_stpgeoloc-zaddress = <fs_zts0001_new>-zaddress.
 wa_zts_stpgeoloc-zcperson = <fs_zts0001_new>-zcperson.
 wa_zts_stpgeoloc-zcnumber = <fs_zts0001_new>-zcnumber.
 MODIFY zts_stpgeoloc FROM wa_zts_stpgeoloc.
 COMMIT WORK AND WAIT.
 ENDIF.
* address
 IF <fs_zts0001_old>-zaddress <> <fs_zts0001_new>-zaddress.
 MOVE: <fs_zts0001_new>-kunnr TO wa_modified_entries-kunnr,
 <fs_zts0001_new>-cdseq TO wa_modified_entries-cdseq,
 <fs_zts0001_old>-zaddress TO wa_modified_entries-old_address,
 <fs_zts0001_new>-zaddress TO wa_modified_entries-new_address.
 v_flag = 1.
 ENDIF.
* person
 IF <fs_zts0001_old>-zcperson <> <fs_zts0001_new>-zcperson.
 MOVE: <fs_zts0001_new>-kunnr TO wa_modified_entries-kunnr,
 <fs_zts0001_new>-cdseq TO wa_modified_entries-cdseq,
 <fs_zts0001_old>-zcperson TO wa_modified_entries-old_person,
 <fs_zts0001_new>-zcperson TO wa_modified_entries-new_person.
 v_flag = 1.
 ENDIF.
* number
 IF <fs_zts0001_old>-zcnumber <> <fs_zts0001_new>-zcnumber.
 MOVE: <fs_zts0001_new>-kunnr TO wa_modified_entries-kunnr,
 <fs_zts0001_new>-cdseq TO wa_modified_entries-cdseq,
 <fs_zts0001_old>-zcnumber TO wa_modified_entries-old_number,
 <fs_zts0001_new>-zcnumber TO wa_modified_entries-new_number.
 v_flag = 1.
 ENDIF.
 ENDIF.
 IF v_flag = 1.
 APPEND wa_modified_entries TO gt_modified_entries.
 CLEAR wa_modified_entries.
 ENDIF.
* update ZTS_STPGEOLOC based from the modified records in ZTS0001
 IF v_flag = 1.
 CLEAR v_flag.
 UPDATE zts_stpgeoloc SET zaddress = <fs_zts0001_new>-zaddress
 zcperson = <fs_zts0001_new>-zcperson
 zcnumber = <fs_zts0001_new>-zcnumber
 WHERE kunnr = <fs_zts0001_new>-kunnr
 AND cdseq = <fs_zts0001_new>-cdseq.
 ENDIF.
 ENDLOOP.
 IF NOT gt_modified_entries[] IS INITIAL.
 EXPORT gt_modified_entries = gt_modified_entries TO MEMORY ID 'MOD'
 ENDIF.
ENDMETHOD.
ENDCLASS.
* CLASS lcl_messages DEFINITION
CLASS lcl_messages DEFINITION INHERITING FROM lcl_main.
PUBLIC SECTION.
 METHODS: create_message.
ENDCLASS.
* CLASS lcl_messages IMPLEMENTATION
CLASS lcl_messages IMPLEMENTATION.
METHOD create_message.
 FIELD-SYMBOLS: <fs_email> LIKE LINE OF gt_zshipto_email,
 <fs_del> LIKE LINE OF gt_del_entries,
 <fs_mod> LIKE LINE OF gt_modified_entries.
 DATA: wa_mailtxt LIKE LINE OF gt_mailtxt,
 wa_mailrec LIKE LINE OF gt_mailrec.
 IMPORT gt_modified_entries = gt_modified_entries
 FROM MEMORY ID 'MOD'.
 IMPORT gt_del_entries = gt_del_entries FROM MEMORY ID 'DEL'.
 SELECT * FROM zshipto_email INTO TABLE gt_zshipto_email
 WHERE zevent = '2'.
 IF sy-dbcnt > 0.
*/ routine for records that were deleted
 IF NOT gt_del_entries[] IS INITIAL.
 t_maildata-obj_name = 'Record Deleted in table ZTS0001'.
 t_maildata-obj_descr = 'Record Deleted in table ZTS0001'.
 t_maildata-obj_langu = sy-langu.
 CLEAR: v_flag, v_counter.
 LOOP AT gt_zshipto_email ASSIGNING <fs_email>.
 LOOP AT gt_del_entries ASSIGNING <fs_del>.
* get name of dealer
 SELECT SINGLE name1 FROM kna1
 INTO <fs_del>-name1
 WHERE kunnr = <fs_del>-kunnr.
 IF v_counter IS INITIAL.
 CONCATENATE: 'FYI: The ff record/s were deleted in tables'
 'ZTS0001 and ZTS_STPGEOLOC by user' sy-uname
 INTO v_contents
 SEPARATED BY space.
 wa_mailtxt-line = v_contents.
 APPEND wa_mailtxt TO gt_mailtxt.
 CLEAR: wa_mailtxt, v_contents.
 ENDIF.
 APPEND wa_mailtxt TO gt_mailtxt. "Extra space for message
 CONCATENATE: 'Dealer :' <fs_del>-kunnr '-'
 <fs_del>-name1
 INTO v_contents
 SEPARATED BY space.
 wa_mailtxt-line = v_contents.
 APPEND wa_mailtxt TO gt_mailtxt.
 CLEAR: wa_mailtxt, v_contents.
 CONCATENATE: 'Ship-To:' <fs_del>-cdseq
 INTO v_contents
 SEPARATED BY space.
 wa_mailtxt-line = v_contents.
 APPEND wa_mailtxt TO gt_mailtxt.
 CLEAR: wa_mailtxt, v_contents.
 CONCATENATE: 'Address:' <fs_del>-zaddress
 INTO v_contents
 SEPARATED BY space.
 wa_mailtxt-line = v_contents.
 APPEND wa_mailtxt TO gt_mailtxt.
 CLEAR: wa_mailtxt, v_contents.
 CONCATENATE: 'Contact person:' <fs_del>-zcperson
 INTO v_contents
 SEPARATED BY space.
 wa_mailtxt-line = v_contents.
 APPEND wa_mailtxt TO gt_mailtxt.
 CLEAR: wa_mailtxt, v_contents.
 CONCATENATE: 'Contact number:' <fs_del>-zcnumber
 INTO v_contents
 SEPARATED BY space.
 wa_mailtxt-line = v_contents.
 APPEND wa_mailtxt TO gt_mailtxt.
 CLEAR: wa_mailtxt, v_contents.
 v_counter = 1.
 ENDLOOP.
 wa_mailrec-receiver = <fs_email>-zemail.
 wa_mailrec-rec_type = 'U'.
 APPEND wa_mailrec TO gt_mailrec.
 CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
 EXPORTING
 document_data = t_maildata
 document_type = 'RAW'
 put_in_outbox = 'X'
* commit_work = 'X'
 TABLES
* object_header = mailtxt
 object_content = gt_mailtxt
 receivers = gt_mailrec
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
 CLEAR: wa_mailtxt, wa_mailrec.
 REFRESH: gt_mailtxt, gt_mailrec.
 ENDLOOP.
 ENDIF.
 CLEAR wa_mailtxt.
 REFRESH gt_mailtxt.
*/ routine for records that were modified
 IF NOT gt_modified_entries[] IS INITIAL.
 CLEAR t_maildata.
 t_maildata-obj_name = 'Record changed in table ZTS0001'.
 t_maildata-obj_descr = 'Record changed in table ZTS0001'.
 t_maildata-obj_langu = sy-langu.
 CLEAR v_counter.
 LOOP AT gt_zshipto_email ASSIGNING <fs_email>.
 CONCATENATE: 'FYI: The ff records were changed in tables'
 'ZTS0001 and ZTS_STPGEOLOC by user' sy-uname
 INTO v_contents
 SEPARATED BY space.
 wa_mailtxt-line = v_contents.
 APPEND wa_mailtxt TO gt_mailtxt.
 CLEAR: wa_mailtxt, v_contents.
 LOOP AT gt_modified_entries ASSIGNING <fs_mod>.
* get name of dealer
 SELECT SINGLE name1 FROM kna1
 INTO <fs_mod>-name1
 WHERE kunnr = <fs_mod>-kunnr.
 APPEND wa_mailtxt TO gt_mailtxt.
 CONCATENATE: 'Dealer :' <fs_mod>-kunnr '-'
 <fs_mod>-name1
 INTO v_contents
 SEPARATED BY space.
 wa_mailtxt-line = v_contents.
 APPEND wa_mailtxt TO gt_mailtxt.
 CLEAR: wa_mailtxt, v_contents.
 CONCATENATE: 'Ship-To:' <fs_mod>-cdseq
 INTO v_contents
 SEPARATED BY space.
 wa_mailtxt-line = v_contents.
 APPEND wa_mailtxt TO gt_mailtxt.
 CLEAR: wa_mailtxt, v_contents.
* address
 IF NOT <fs_mod>-old_address IS INITIAL AND
 NOT <fs_mod>-new_address IS INITIAL.
 CONCATENATE: 'Address from:' <fs_mod>-old_address
 INTO v_contents
 SEPARATED BY space.
 wa_mailtxt-line = v_contents.
 APPEND wa_mailtxt TO gt_mailtxt.
 CLEAR: wa_mailtxt, v_contents.
 CONCATENATE: 'Address to :' <fs_mod>-new_address
 INTO v_contents
 SEPARATED BY space.
 wa_mailtxt-line = v_contents.
 APPEND wa_mailtxt TO gt_mailtxt.
 CLEAR: wa_mailtxt, v_contents.
 ENDIF.
* person
 IF NOT <fs_mod>-old_person IS INITIAL AND
 NOT <fs_mod>-new_person IS INITIAL.
 CONCATENATE: 'Contact person from:'
 <fs_mod>-old_person
 INTO v_contents
 SEPARATED BY space.
 wa_mailtxt-line = v_contents.
 APPEND wa_mailtxt TO gt_mailtxt.
 CLEAR: wa_mailtxt, v_contents.
 CONCATENATE: 'Contact person to :'
 <fs_mod>-new_person
 INTO v_contents
 SEPARATED BY space.
 wa_mailtxt-line = v_contents.
 APPEND wa_mailtxt TO gt_mailtxt.
 CLEAR: wa_mailtxt, v_contents.
 ENDIF.
* number
 IF NOT <fs_mod>-old_number IS INITIAL AND
 NOT <fs_mod>-new_number IS INITIAL.
 CONCATENATE: 'Contact number from:'
 <fs_mod>-old_number
 INTO v_contents
 SEPARATED BY space.
 wa_mailtxt-line = v_contents.
 APPEND wa_mailtxt TO gt_mailtxt.
 CLEAR: wa_mailtxt, v_contents.
 CONCATENATE: 'Contact number to :'
 <fs_mod>-new_number
 INTO v_contents
 SEPARATED BY space.
 wa_mailtxt-line = v_contents.
 APPEND wa_mailtxt TO gt_mailtxt.
 CLEAR: wa_mailtxt, v_contents.
 ENDIF.
 ENDLOOP.
 wa_mailrec-receiver = <fs_email>-zemail.
 wa_mailrec-rec_type = 'U'.
 APPEND wa_mailrec TO gt_mailrec.
 CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
 EXPORTING
 document_data = t_maildata
 document_type = 'RAW'
 put_in_outbox = 'X'
* commit_work = 'X'
 TABLES
* object_header = mailtxt
 object_content = gt_mailtxt
 receivers = gt_mailrec
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
 CLEAR: wa_mailtxt, wa_mailrec.
 REFRESH: gt_mailtxt, gt_mailrec.
 ENDLOOP.
 ENDIF.
 ENDIF.
 FREE MEMORY ID 'AVH'.
 FREE MEMORY ID 'DEL'.
 FREE MEMORY ID 'MOD'.
ENDMETHOD.
ENDCLASS.
START-OF-SELECTION.
* FORM get_orig_contents_of_zts0001 *
*/ before saving the data in the database
FORM get_orig_contents_of_zts0001.
DATA: get_old_recs TYPE REF TO lcl_get_old_recs.
CREATE OBJECT get_old_recs.
CALL METHOD get_old_recs->export_old_recs.
ENDFORM.
* FORM get_rev_contents_of_zts0001 *
*/ after saving the data in the database
FORM get_rev_contents_of_zts0001.
DATA: old_and_new TYPE REF TO lcl_old_and_new,
 check_changes TYPE REF TO lcl_check_changes,
 messages TYPE REF TO lcl_messages.
CREATE OBJECT: old_and_new, check_changes, messages.
CALL METHOD old_and_new->compare_old_and_new.
CALL METHOD check_changes->check_for_changes.
CALL METHOD messages->create_message.
ENDFORM.
* FORM move_latest_date_and_user *
FORM move_latest_date_and_user.
zts0001-zcreated_by = sy-uname.
zts0001-zchanged_date = sy-datum.
ENDFORM.
Hope it helps...
P.S. Please award points if it helps...

Send mail with attached file without using Repository

Hello,
I want to know if have a way to Send mail with attached file without using Repository.
Regards
Elad

Elad,
Check this article where a image has been picked by the file adapter and sent as an attachment to the mail adapter.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6d967fbc-0a01-0010-4fb4-91c6d38c5816">Sending an Image File Through XI in a File-to-Mail Scenario</a>
For how to proceed without integration repository content look into this blog,
<a href="/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository">How to send any data (even binary) through XI, without using the Integration Repository</a>
Combining these 2 you have the solution.
Regards
Bhavesh

Sender "Mail" adapter - CSV file attachment

Hi there
I'm looking for some help in configuring a sender mail adapter that receives ".csv" files. I did read some blogs that mention using the "PayloadSwapBean" module to read the mail attachment instead of the mail content. My problem is to now convert the ".csv" file into a message. Is there a module that I can use ( is it the "MessageTransfomBean" ) and how. Any help would be appreciated.
Thanks
Salil

Hi Salil,
If you want to send a mail with a body and attachments, the message sender HAS to provide an XI message with attachments. I doubt a CSV file does justice.
As Renjith said you need to convert CSV to XmL.
A short description about the Standard Modules:
MessageTransformationBean is a standard module used to apply the XSLT mapping to the adapter module by using Transform.class ( This xslt mapping is done to create a mail package, Dont confuse with the actual mapping in your case this is NOT for converting csv to xml).
Also this module can be used to change the name and type of payloads by using Transform.contentType, Transform.contentDisposition, Transform.contentDescription.
PayloadSwapbean is a standard module for replacing payloads with other payloads (SWAP)
If you want to give each attachment a certain name use Parameters, swap.keyname for name of the payload and swap.keyvalue.
I Hope the use of standard modules is understood.

FTP Send mail when no file after 8 polling

I want to send mail when the FTP Adapter tried polling for 8 times and no file is there in the directory. How can we acheive this.
Thanks
Sebin

Hi Thomas,
want to send mail when the FTP Adapter tried polling for 8 times and no file is there in the directory. How can we acheive this.
>>i think this is not possible with xi without having any file in directory ......xi needs some data otherwise how u will get the error report which u want to send as a mail ............as per my knowledge there must be some file in directory ....for xi to send back the responce ....empty directory i think it w'nt work ..........correct me if i am wrong .........guys !
Regards,
Azeez khan.

HELP! Can't mail a ZIP file.

For some strange reason, my Mac Mail has decided to stop letting me email ZIP files, is there something I should know, or do to correct this.
Thanks.
dave

Do you get some kind of error?

Converting html file into zip file and send email attaching zip file

Hi Experts,
I am trying to send email with attachment(html). Which contains more than 7MB. So, It is throwing an error like Size exceeded.
So, Now i need to compress the data for less than 7MB.
I decided to convert HTML File into ZIP File.
Kindly suggest me to convert the HTML file into ZIP file and sending email with attached ZIP file.
Correct answer rewarded,
Thanks & Regards,
N. HARISH KUMAR

Hi Experts,
*// HTML_TAB converting into ZIP File
 DATA : zip_tool TYPE REF TO cl_abap_zip,
 filename TYPE string ,
 filename_zip TYPE string .
 DATA : t_data_tab TYPE TABLE OF x255,
 bin_size TYPE i,
 buffer_x TYPE xstring,
 buffer_zip TYPE xstring.
filename = text-007. "'HTML_TAB
*describe the attachment
 DESCRIBE TABLE html_tab LINES tab_lines.
 bin_size = tab_lines * 255.
 CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
 EXPORTING
 input_length = bin_size
 IMPORTING
 buffer = buffer_x
 TABLES
 binary_tab = html_tab.
 IF sy-subrc <> 0.
* message id sy-msgid type sy-msgty number sy-msgno
* with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
*create zip tool
 CREATE OBJECT zip_tool.
*add binary file
 CALL METHOD zip_tool->add
 EXPORTING
 name = 'FSSAI_MAIL.HTML'
 content = buffer_x.
*get binary ZIP file
 CALL METHOD zip_tool->save
 RECEIVING
 zip = buffer_zip.
 CLEAR: t_data_tab[],bin_size.
 CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
 EXPORTING
 buffer = buffer_zip
 IMPORTING
 output_length = bin_size
 TABLES
 binary_tab = html_tab.
Thanks & Regards,
N. HARISH KUMAR

Cannot "Send to" large .zip files

We cannot use the "send to" feature to send large .zip files to another document library. I can send small .zip files with no issues. This file is 450mb. I know what your thinking, it over our size limit, however, I can send .pptx that are 700
mb because we set out limit to 750mb.
The message we get is "Sorry, something went wrong."

Hi ChipTech1,
Please go to your SharePoint Central Administration, set the "Maximum Upload Size" value for this problematic web application, then add the following code in the web.config file (please backup the original web.config file) under 15\ISAPI folder
per the following article, then iisreset and check if it works.
Note: This mocification will be covered when you install SharePoint CU or Service Pack update.
<location path=”OfficialFile.asmx”>
 <system.web>
 <httpRuntime maxRequestLength=”2097151″ executionTimeout=”240″ />
 </system.web>
</location>
http://danmyhre.wordpress.com/2012/05/15/50mb-limit-on-files-sent-to-content-organizerofficialfile-asmx/
Thanks
Daniel Yang
TechNet Community Support

Send mail witch attach files from forms server 6i

How to attach file from my logical drive , and sending mail via forms web 6i ?

Hi jean,
there is a lot of complication involved with trying to attach files using the java web server, the best thing i have done was i have added a microsoft windows email component on to my form and invoked its methods and properties, for eg. for attaching a file u have something called as microsoft windows common controls which opens the file open dialog box. Remember , trying to build email and messeging kind of applications with oracle tools is a bit complicated as of now because windows 2000 server has additional security features equivalent to standard firewall and the java interface of oracle looks for certifications for each and every cgi request.
Rajendra - [email protected]

Mail Adapter ZIP File Attachment

Hello,
I have created an interface using the mail receiver to mail a file as an attachment to an email address. I have used an ABAP mapping to create the Mail message associating the required content of Mail message. This all works fine and the emails with the required attachments are delivered successfully.
I now need the ability to ZIP the file attachments. I have had a look through some of the forum messages and it looks like I am going to have to create a java module for the receiver mail adapter to ZIP the file.
Has anyone done this before? If so can you give me some pointers. I have developed modules for the file adapter but am not sure how to ZIP.
Alternatively can this be done as part of the ABAP mapping. I have started looking at class CL_ABAP_ZIP. I am now able to compress the content but this does not create a valid archive as the attachment.
Any help would be much appreciated.
Thanks
Gary

Dear Sameer ,
Can you send me the Java Code which zips the folder or files .
My email id is [email protected]
Regards
Prabhat

Sending mail with attachment file through plsql

Hi,
Now i send the mail using utl_smtp and utl_tcp.
How can i send a mail with a attachment file. That file is in the local directory. Can any one know just send me to the following mail id [email protected]
Regards
Suresh

Hi,
Now i send the mail using utl_smtp and utl_tcp.
How can i send a mail with a attachment file. That file is in the local directory. Can any one know just send me to the following mail id [email protected].
Regards
Suresh

Send mail by zip file format..

Similar Messages

Maybe you are looking for