Send mail if original budget was changed ( CJ30 )

Hi,
Is there a BADI, Customer Exit or something else that allows me to send a mail to the project manager if the budget was changed in transaction CJ30?
A project member changes a budget in a subordinated WBS-Element for example. The project responsible has to be informed about that.
I don't mean availability control.
I've thougt about an workflow too. But I found no business object or an event.
Thanks. Uli

Hi Uli,
U can try below soltuion.
If you have configured SAP connect ( Tcode : Scot ) , you will be able to send mails from yr SAP system.
Then you can decide whether you want change the standard program to trigger the mail while the budget is changed or schedule a custom program which checks whether budget has been changed and triggers a mail to concerned people.
Regards
Balaji

Similar Messages

Exchange email can no longer send since password on exchange was changed

I have an iPhone 4 that I could not initially get to send emails with exchange! Not sure why but it just started working and has been working ever since. It started working once the domain value was left empty but, although initially it couldn't login to exchange without! Something changed and it just started working and has been ever since.
Today was forced to change my login password for exchange and the network and updated the password in the iphone but now I'm back to receiving the "an error occurred while delivering this message" or if I empty the value from the Domain field I receive password prompts again. I'm now back to the problem I originally had any nothing changed except the password.
Does anyone have any ideas on what could be causing this as I receive email via push with no problem. It just will not send any emails. My iPad has exactly the same issue as well. Worked fine until I had to change the password

Attention Forum Administrator(s) - PLEASE ESCALATE to the development team.
Dear iPhone user:
You've uncovered a subtle defect in iOS 4.21. The defect, and workaround are listed below.
Symptom: changing Hotmail/MSN/microsoft based email account password in iOS 4.21 allows INCOMING mail, but OUTGOING mail no longer works.
Defect/root cause: Changes to updated password in "Settings >> Mail, Contacts, Calendars >> [hotmail account]" to the 'Incoming Mail Server' field ARE NOT PROPAGATED to the 'Outgoing Mail Server' password field.
The issue is compounded because the Mail account setting for 'Incoming Mail Server' password field is discoverable, BUT 'Outgoing Mail Server' password is not discoverable.
Steps to workaround:
1. Choose "Settings >> Mail, Contacts, Calendars >> [hotmail account]".
2. Change 'Password' field under 'Incoming Mail Server'.
3. Click the link 'smtp.live.com' under 'Outgoing Mail Server / SMTP'.
4. Click the 'Primary Server' link (smtp.live.com) to bring up the 'Server Settings' page.
NOTE: details of the OUTGOING MAIL SERVER are displayed.
5. Click the 'outgoing' "Password" field, and enter the updated password.
RESULT: updates to 'incoming' password are accepted, but 'outgoing' password is not updated to match 'incoming'.
EXPECTED: whenever 'incoming' password is changed, the 'outgoing' password should be changed TO MATCH [via the iOS mail client settings app]
(from a Sr. QA Analyst [in Seattle] who's looking for a better gig, and found this problem *with NO SOLUTION FOUND*, and solved the issue on my own... hello???) ;?>

Automatic Send mail when sales order is change

Hi friends,
I have a requirement that when ever sales order is created or change i.e in va01 or va02 automatically mail to send to customer. So please can u sujjest me in doing this ?
with regards,
prasad.

Write the codes in sales order exit program so that as soon as you save the sales order the email can be triggered.
Abap Program: MV45AFZZ
USEREXIT_SAVE_DOCUMENT
Sending e-mails using ABAP
Thanks
Ganesh
you can also use work flow to trigger the email from sales order.
Edited by: Ganesh Modhave on Oct 6, 2008 10:54 AM

My e-mail address for Skype was changed. Help?

Hello, first off let me state that I am using this account, but it is my other account that I need help with. I recently received an email stating that my email address for skype had been changed. At that time I received 4 unauthorized charges for "Skype Credit" from my Paypal account. I now cannot login as my password has been changed and I cannot access help from that account without logging in. Can someone with Skype please help me so I can close that account before more charges are attempted?

Try this one:
Settings > Store > tap on your Apple ID. Log out and then log back in with your new account information.
I hope this works for you.

Problem: Cannot send mail unless Password is transmitted insecurely & Port is set to 587.. Can receive mail but can't send..

Problem: Cannot send mail unless Password is transmitted insecurely & Port is set to 587.. Can receive mail but can't send Code 501..
Need help with T-bird.. My OS is Win XP-64..Have been using Mozilla for about 10 years with little or no problems.. This happened when I upgraded to 3.17.. Spent hours on T-Bird diagnostics web site.. Called Comcast & talked to a net tech.. he ran some tests on his end & had me log into my Comcast e-mail account & all worked well,, so he concluded the problem was in T-Bird.. He had me change my port to 587 & disable connection security & authentication to none & I was able to send mail.. That was all he could do.. Comcast was working.. the problem is in T-Bird.. Can any one help with this problem.. I don't want to send mail with my password transmitted insecurely..
Thanks
Richard

It was not intended to be "snide". You said two separate things that at face value would be out of the ordinary.
I considered if it might be a typo for 31.7. Since 31.5 is the current formal release, I would have to thank you for volunteering to test a pre-release beta version. If it was truly 3.1.7 then it would appear that you have chosen, or have become stuck with a somewhat ancient version. In either case it's harder to reach out to you with any meaningful comments or advice. However I do watch various other sites and newsgroups and I don't see a clamour of distressed users, so it seems fair to suppose that this feature isn't actually broken in 31.7.
And you said XP 64. XP is obsolete and no longer supported and if there is a 64-bit version, then again you have set yourself apart from the mainstream.
I had a look at the comcast site and found some puzzling recommendations. Some users come here asking how to set up a secured connection in Thunderbird when it isn't offered by the server. Comcast are different, in that they mention the ports 143 and 587, and also 993 and 465. So far so good, in that security is actually on offer, but they also suggest that you enable SSL, regardless of which port is being used. It would be unusual and unconventional to offer TLS or SSL on ports 143 and 587. STARTTLS would be more credible on these ports.
Have you tried IMAP on 993 and SMTP on 465? SMTP on 587 with SSL, or TLS, is not impossible, but is improbable.

Sending mail pooping out

I get the following error message when trying to send mail:
The server response was: http://njabl.org/dynablock.html.
Use the pop-up menu below to try a different outgoing mail server. All messages will use this server until you quit Mail or change your network settings.
This message appears regardless of who I send to or what outgoing server I use. Please Help!!

Contact your ISP about the problem. This would likely be a problem at their end unless you are using that site to block or report spam in which case you should visit the URL and read the posted message.

Problem while sending mail inOIM 11g r2

HI,
i am getting following error while sending mail in OIM 11G r2
<Jun 13, 2012 12:53:25 AM PDT> <Warning> <oracle.adfinternal.view.faces.renderkit.rich.SelectItemUtils> <ADF_FACES-30118> <No help provider found for helpTopicId=create_user.>
java.net.MalformedURLException: For input string: "SOA_PORT"
at java.net.URL.<init>(URL.java:601)
at java.net.URL.<init>(URL.java:464)
at java.net.URL.<init>(URL.java:413)
at java.net.URI.toURL(URI.java:1081)
at oracle.j2ee.ws.common.transport.HttpTransport.transmit(HttpTransport.java:61)
at oracle.j2ee.ws.common.async.MessageSender.call(MessageSender.java:64)
at oracle.j2ee.ws.common.async.Transmitter.transmitSync(Transmitter.java:134)
at oracle.j2ee.ws.common.async.Transmitter.transmit(Transmitter.java:90)
at oracle.j2ee.ws.common.async.RequestorImpl.transmit(RequestorImpl.java:273)
at oracle.j2ee.ws.common.async.RequestorImpl.invoke(RequestorImpl.java:94)
at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:811)
at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:235)
at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:106)
at oracle.j2ee.ws.client.jaxws.WsClientProxyInvocationHandler.invoke(WsClientProxyInvocationHandler.java:254)
at $Proxy422.send(Unknown Source)
But it is known issue in OIM 11gr2 .
solution is The cause of this error is malformed URL. To resolve the issue, provide the correct values for SOA_PORT and SOA_HOST in Enterprise Manager (EM).
BUT i didn't find the SOA_PORT,SOA_HOST in EM console.
Thanks,
Edited by: 853559 on Sep 20, 2012 3:09 AM

. Follow the steps mentioned below to configure the workflow notification properties:
•     Login to EM console as weblogic user.
•     Expand SOA.
•     Right click on <soa-infra> ANY ONE WILL BE REFLECTED. Select SOA Administration --> Workflow notification properties
•     Select "Email" from “Notification Mode” list
•     Provide notification service field values as:
o     Email : From Address * : [email protected]
o     Email : Actionable Address : [email protected]
o     Email : Reply To Address: [email protected]
•     Click Apply
•     Click "Go to the Messaging Driver page" link
•     Select configure driver: Provide Driver-Specific Configuration as:
o     MailAccessProtocol : IMAP
o     ReceiveFolder : INBOX
o     OutgoingMailServer : smtp.sample.com
o     OutgoingMailServerPort : 25
o     OutgoingDefaultFromAddress : [email protected]
•     Click Apply
If you are sending mail through xelsysadm account then change the value of “Email” field of that account .
Also configure Email Server ITResource .
Edited by: IAM_TECH on Sep 20, 2012 3:48 PM

Cannot send mail - server does not allow relaying

I keep getting a sporadic error message on my ipad: "cannot send mail. The recipient was rejected by the server because it does not allow relaying". Sometimes it doesn't happen and the mail sends fine. Sometimes I get the error message but the message then sends later. Sometimes it never sends.
Can anyone help?

Hi, I've suddenly encountered this problem. I have a 1st gen iPad. I've reset, deleted, re-added, turned on both outgoing servers, added my password--this last doesn't stay in the primary outgoing server field; when I go back in, the password field is filled with the (optional) text again and when I 'click' into the authentication box, the password is no longer checked. However, these are all filled in the secondary outgoing server, so it shouldn't matter. Restarted the iPad a couple times. Using system 5.1.1--I think that's as far as I can go. Any miracles out there?

"smtp error" in webmail when sending mails

Hello,
"smtp error" in webmail when sending mails
why?

With the very little data offered, I can only give a general idea.
"smtp error" usually means that webmail isn't pointed to a smtp server for sending out mails.
Webmail normally (by default) points to the same box it's on for sending mails out. You can change the host and port with configutil.
Some versions of webmail must point to iMS, and other mail servers won't work. Since I have no idea what version you have, I can't tell if this is a problem.
Did it ever work?
What version are you using?

My i pad was purchased by my husband using his credit card but now when i send mails using icloud account to shows like is coming from him. how can i change his name to mine

my i pad was purchased by my husband using his credit card but now when i send mails using icloud account to shows like is coming from him. how can i change his name to mine

MacBook Airs won't run Classic, nor will Classic connect to iCloud accounts. You will need your Mac OS X version to answer the question involved. Go to Apple menu -> About This Mac, and post in the appropriate forum in the link below:
https://discussions.apple.com/docs/DOC-2463

Personal data change in PORTAL (PA30) - need to send mail notification

Hi,
When there is any change in personal data on PORTAL need to send a mail notification to the respective agents. I was able to design the workflow in such a way that , whenever there is any change in the personal data (Ex. Marital status) it trigger an event and workflow starts, inturn it send mail to external system and sap Userid.
The question is ?
1. If the personal data is changed from the portal , does it trigger the same event in the backend ? does
it start my workflow?
Thanks!
Richard A

Hello Richard,
In my opinion same event is triggered. You can check it in transaction SWEL.
Please have a look at the following threads more more detailed information,
Workflow is not trigerred from the portal
/thread/113450 [original link is broken]
/people/alan.rickayzen/blog/2003/10/13/workflow-in-the-enterprise-portal
Best regards,
Abir.

Is anyone else having trouble sending mail? I have a MobileMe subscription - not sure whether that is the problem. The Port assigned to my mail account on my iMac has a different number for the one recommended by Apple, but I hesitate to change it.

Is anyone else having trouble sending mail on an iMac running 10.6.8. I get a messsage that the server can't be accessed. Apple help suggests using a different port from the one that was originally set. I have a Mobile Me account. Any suggestions?

I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot!

Since upgrade to iOS 7 Email error on over 100KB emails "Cannot Send Mail The message was rejected by the server because it is too large." Connecting to Exchange via Activesync

Hi,
Following the upgrade to iOS 7.0.3 on all our iPhone and iPad devices, it has been identified that when sending emails around 100KB in size and over an error message appears on the device stating “Cannot Send Mail The message was rejected by the server because it is too large.” See error message below. The send/receive limit is over 10MB so this is not the issue.
We are in an Exchange Environment using Microsoft Activesync. This issue is not evident in iOS 6. This has been tested on an iPhone 3GS running version iOS 6.1.3. We have been unable to repeat the issues seen on iOS 7 on the older OS. It is not possible to roll back to the older operating system as Apple are no longer signing the software.
We use Microsoft Active Sync to connect to our Exchange servers through a TMG. The issue is very inconsistent, some identical emails go through, some fail. This is not an issue with the send/receive limit as this is over 10MB. The error message when it fails on the TMG is Status: 413 Request Entity Too Large, which we believe is from IIS on the CAS server.
Does anyone have any suggest course of actions to take?
Many Thanks

This resolution have to attend at the server not with the ios device. My employer's mail administrator reject me to correct it from the server. As his concern is, if ither ios devices works why don't mine? So I am helpless than changing my iphone. It works fine for early versions of ios and with androids. And also one of my friends iphone4 with ios 7 (similar as mine) works too. So I guess it's something wrong with my iPhones settings. But basic question I cannot understand is it works in my phone before this ios7 upgrading. And currently working with my yahoo account too. Favourable reply expected.

Problem with replies in Maverick's mail. Originating emails send fine. When replying to an email (various addresses) the reply is hung up and can not be sent. Option becomes put in draft, delete, etc. Any suggestions would be helpful

Problem with replies in Maverick's mail. Originating emails send fine. When replying to an email (various addresses) the reply is hung up and can not be sent. Option becomes put in draft, delete, etc. Any suggestions would be helpful. Mid 2013 iMac.

I don't know how rare this is. I went a week or so without a problem, and now it's starting to recur. Also, in some instances, an email will look unsent (remain in the outbox on the Treo), but it has been sent, and recipients are replying while I'm trying to figure out what is going on. Further, it will send the same email over and over during this madness.
This is a show stopper. If there isn't a software fix soon, I may chuck this phone in the garbage.
Post relates to: Treo 800w (Sprint)
UPDATE: The problem comes and goes. The next day, no changes to the treo, everything workeds. Now i'm suspecting the sprint server, and how it/the phone responds from failing to send while roaming. I've since turned off roaming, and haven't had a problem for several days.
Message Edited by slrichardson on 12-22-2008 01:12 PM

I keep getting a message "cannot send mail" a copy has been placed in your outbox. The recipient was rejected by the server because it does not allow relaying

I keep getting a message "cannot send mail" a copy has been placed in your outbox. The recipient was rejected by the server because it does not allow relaying. How can I fix this error so I can send emails.

The issue definitely sounds like your Outgoing/SMTP settings need to be changed. Simply set them to the proper settings for your provider as was suggested above.
I found this link for Knology: http://support.knology.net/content/email.setup.cfm
The SMTP settings can be edited on the iPad/iPhone by going to Settings--> Mail, Contacts, Calendars, edit the account having trouble, click the Account, then at the bottom is the SMTP server info, click on it to edit it further.
It should allow you to edit the primary smtp server and let you enter all the good stuff as you see in the Knology link above.
Some providers require you to register your account on their service like AT&T.

Send mail if original budget was changed ( CJ30 )

Similar Messages

Maybe you are looking for