Send mail through CL_BCS class with normal priority

Hello guys!!!
I'm trying to send email through CL_BCS class, and it's work fine!
But, always sent with high priority, and I need to send whith normal priority.
I tried this:
DATA: o_send_request TYPE REF TO cl_bcs,
        o_document     TYPE REF TO cl_document_bcs.
o_document = cl_document_bcs=>create_document(
                 i_type       = 'HTM'
                 i_text       = msgbody
                 i_subject    = subject
                 i_importance = '5' ).
And this:
CALL METHOD o_send_request->send_request->setu_priority
    EXPORTING
      i_priority = o_send_request->cp_priority_normal.
Unfortunately, don't works.
Any idea?
Thanks!!!
Kleber S. Kiefer

Hi,
Please try the following solution:
* set mail importance to normal
TRY.
lo_document ?= lo_send_request->document( ).
lo_document->set_importance( i_importance = '5' ).
CATCH cx_sy_move_cast_error.
ENDTRY.
In addition, in the Alert framework, which send emails with high priority, it controls the document's importance and then send out the emails with high priority.
* create send request, document etc..
    TRY.
        lo_document = cl_document_bcs=>create_document(
                              i_type = l_texttype
                              i_text = lt_text
                              i_importance = '1'
                              i_language = ls_langu_recipient-langu
                              i_subject = l_subject_short
                              i_length = l_so_obj_len ).

Similar Messages

Sending mail through multiple domains with iMS

I have iMS configured and working fine for multiple domains (users are
members of multiple domains). I have done this with a main email address
(main.com), and alternative email addresses to the other domains (alt1.com,
alt2.com...) so that there is one central mail location at (main.com). This
works great for receiving emails.
However, when I send email I would like to be able to show the FROM address
being from one of the alternate domains (alt1.com, alt2.com...) rather than
the main domain (main.com) sometimes. I have authentication turned on for
the sending messages, and users are logging in as ([email protected]). I assume
there is something I can add that will allow this to happen as long as a
valid address exists on my server. Any thoughts?
main domain: main.com (All mail is addressed from this domain)
alt domains: alt1.com, alt2.com...
Thanks in advance, Chris

BTW I am using iMS 5.1.
-Chris
I have iMS configured and working fine for multiple domains (users are
members of multiple domains). I have done this with a main email address
(main.com), and alternative email addresses to the other domains(alt1.com,
alt2.com...) so that there is one central mail location at (main.com).This
works great for receiving emails.
However, when I send email I would like to be able to show the FROMaddress
being from one of the alternate domains (alt1.com, alt2.com...) ratherthan
the main domain (main.com) sometimes. I have authentication turned on for
the sending messages, and users are logging in as ([email protected]). I
assume
there is something I can add that will allow this to happen as long as a
valid address exists on my server. Any thoughts?
main domain: main.com (All mail is addressed from this domain)
alt domains: alt1.com, alt2.com...
Thanks in advance, Chris

Send mail using CL_BCS through function module, run in background task.

Hi,
I am running a function module in Background task. in this function module I am sending mail using CL_BCS class.
but mail is not generated. if I run the same function Module in foreground mail generated successfully....
can anyone please tell me the reason behind this.

Hi i realise that The LIST_TO_ASCII thing is not working correctly in background because the the list-processing in beckground is working not the same as in dialog i think.
I can only get the last page of the list out when running in background. Any solution to this?
my code:
    CALL FUNCTION 'LIST_TO_ASCI'
         EXPORTING
              list_index         = sy-lsind
         TABLES
             list_dyn_ascii = downtab
         EXCEPTIONS
              empty_list         = 1
              list_index_invalid = 2
              OTHERS             = 3.
    IF sy-subrc NE 0.
      EXIT.
    ENDIF.
Thanks ,
LH

Uncaught Exception occured while sending mail through abap code.

Hi,
Uncaught Exception occured while sending mail through abap code.Run time Errors "UNCAUGHT_EXCEPTION" occured after excuting the call method CALL METHOD SEND_REQUEST->SEND( ).kindly help in resolving the issue.

HI,
Runtime Error: UNCAUGHT_EXCEPTION details.
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_ADDRESS_BCS
Short text
     An exception occurred that was not caught.
What happened?
     The exception 'CX_ADDRESS_BCS' was raised, but it was not caught anywhere along
     the call hierarchy.
     Since exceptions represent error situations and this error was not
     adequately responded to, the running ABAP program 'SAPLZSEND_MAIL' has to be
     terminated.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_ADDRESS_BCS', was not caught in
    procedure "SEND_MAIL" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    An exception occurred
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "UNCAUGHT_EXCEPTION" "CX_ADDRESS_BCS"
    "SAPLZSEND_MAIL" or "LZSEND_MAILU01"
    "ZSEND_EMAIL"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"SEND_MAIL" "(FORM)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
Please help me to resolve this issue.

Problem while sending mail through posprocess event hadler inOIM 11g r2

Hi,
i am sending mail through posprocess event hadler inOIM 11g r2 when user is created.But i am getting following error in resolver class.
java.lang.NullPointerException
at oracle.iam.identity.usermgmt.impl.UserDetailsProviderImpl.getUserDetails(UserDetailsProviderImpl.java:102)
at oracle.iam.notification.impl.util.NotificationUtil.getUserPreferences(NotificationUtil.java:83)
at oracle.iam.notification.impl.NotificationServiceImpl.notify(NotificationServiceImpl.java:523)
at oracle.iam.notification.impl.NotificationServiceImpl.notify(NotificationServiceImpl.java:271)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at oracle.iam.notification.impl.util.NotificationUtil.getUserPreferences(NotificationUtil.java:83)
at oracle.iam.notification.impl.NotificationServiceImpl.notify(NotificationServiceImpl.java:523)
at oracle.iam.notification.impl.NotificationServiceImpl.notify(NotificationServiceImpl.java:271)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
Edited by: 853559 on Sep 25, 2012 6:27 AM

If you are using Custom Notification XML, make sure to have StaticData element in it. StaticData defines the entitites that can be used in the notification template, and these entities attributes are used to define substitution tokens in the template.

Sending mail through a proxy client

I have the following simple code to send mail through a SOCKS proxy client:
package com.apna.beans;
import java.util.Properties;
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.DataSource;
import javax.activation.FileDataSource;
import javax.activation.DataHandler ;
public class SMail{
public static void main(String[]a){
System.setProperty("proxySet","true");
/*System.getProperties().put("http.proxyPort","25");
System.getProperties().put("http.proxyHost","192.168.0.1");*/
Properties props = System.getProperties();
String msg = "";
// Get system properties
final String username = "vedijitendra";
final String password = "sendmail";
props.put("socksProxyHost", "pc-2");
props.put("socksProxyPort", "1080");
props.put("mail.smtp.host", "smtp.gmail.com");
props.put("mail.smtp.starttls.enable", "true");
props.put("mail.user", username);
props.put("mail.smtp.auth","true"); // this is imp for authorisation.
//props.put("mail.host", "192.168.0.1");
props.put("mail.debug", "true");
props.put("mail.store.protocol", "pop3");
props.put("mail.transport.protocol", "smtp");
try{
//here the authorisation takes place using an Anonymous class.
Session session = Session.getDefaultInstance(props,
new javax.mail.Authenticator (){
protected
javax.mail.PasswordAuthentication
getPasswordAuthentication() {
return new
javax.mail.PasswordAuthentication(username,
password);
// Define message
Message message = new MimeMessage(session);
message.setFrom(new InternetAddress("[email protected]"));
message.addRecipient( Message.RecipientType.TO, new
InternetAddress("[email protected]"));
message.setSubject("Test");
message.setContent("text", "text/html");
// Send the message
Transport.send(message);
msg = "The mail has been sent.";
} catch(Exception e){
e.printStackTrace();
msg = "The mail has not been sent.";
I am able to connect to the GMail's SMTP server.
However, when the Transport. send method is executed, I get:
java.lang.NullPointerException
at com.sun.mail.util.SocketFetcher.startTLS(SocketFetcher.java:242)
at com.sun.mail.smtp.SMTPTransport.startTLS(SMTPTransport.java:1191)
at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:348)
at javax.mail.Service.connect(Service.java:297)
at javax.mail.Service.connect(Service.java:156)
at javax.mail.Service.connect(Service.java:105)
at javax.mail.Transport.send0(Transport.java:168)
at javax.mail.Transport.send(Transport.java:98)
Any ideas?

I have the following simple code to send mail through a SOCKS proxy client:
package com.apna.beans;
import java.util.Properties;
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.DataSource;
import javax.activation.FileDataSource;
import javax.activation.DataHandler ;
public class SMail{
public static void main(String[]a){
System.setProperty("proxySet","true");
/*System.getProperties().put("http.proxyPort","25");
System.getProperties().put("http.proxyHost","192.168.0.1");*/
Properties props = System.getProperties();
String msg = "";
// Get system properties
final String username = "vedijitendra";
final String password = "sendmail";
props.put("socksProxyHost", "pc-2");
props.put("socksProxyPort", "1080");
props.put("mail.smtp.host", "smtp.gmail.com");
props.put("mail.smtp.starttls.enable", "true");
props.put("mail.user", username);
props.put("mail.smtp.auth","true"); // this is imp for authorisation.
//props.put("mail.host", "192.168.0.1");
props.put("mail.debug", "true");
props.put("mail.store.protocol", "pop3");
props.put("mail.transport.protocol", "smtp");
try{
//here the authorisation takes place using an Anonymous class.
Session session = Session.getDefaultInstance(props,
new javax.mail.Authenticator (){
protected
javax.mail.PasswordAuthentication
getPasswordAuthentication() {
return new
javax.mail.PasswordAuthentication(username,
password);
// Define message
Message message = new MimeMessage(session);
message.setFrom(new InternetAddress("[email protected]"));
message.addRecipient( Message.RecipientType.TO, new
InternetAddress("[email protected]"));
message.setSubject("Test");
message.setContent("text", "text/html");
// Send the message
Transport.send(message);
msg = "The mail has been sent.";
} catch(Exception e){
e.printStackTrace();
msg = "The mail has not been sent.";
I am able to connect to the GMail's SMTP server.
However, when the Transport. send method is executed, I get:
java.lang.NullPointerException
at com.sun.mail.util.SocketFetcher.startTLS(SocketFetcher.java:242)
at com.sun.mail.smtp.SMTPTransport.startTLS(SMTPTransport.java:1191)
at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:348)
at javax.mail.Service.connect(Service.java:297)
at javax.mail.Service.connect(Service.java:156)
at javax.mail.Service.connect(Service.java:105)
at javax.mail.Transport.send0(Transport.java:168)
at javax.mail.Transport.send(Transport.java:98)
Any ideas?

Error while sending mail through SMTP

Hi,
We are getting the following error while trying to send mail through SMTP.
'554 ERROR_MESSAGE_STATE: SMTP_NO_HANDLER( host:1-,subrc:0001)'
Please advice,
Regards,
Sam

Hi All,
Configured SMTP as per the note 455140,i can able to send mails from SAP to the out side world,
mails in SAP.When i tried the test to check whether the SAP system is correctly set up to receive e-mails as per the note 607108, iam getting a connection closed message as below.
afgdev:pgdadm> telnet afgdev 2500
Trying...
Connected to afgdev.
Escape character is '^]'.
220 afgdev.abc.ae SAP 6.40(52) ESMTP service ready
helo afgdev
250 afgdev.abc.ae
mail from:<[email protected]>
250 Ok
rcpt to:<[email protected]>
250 Ok
data
354 Enter mail, end with "."
Hello,This is a test.
Connection closed.
afgdev:pgdadm>
rgds
Sam

Error: in sending mail through dynamics actions

Hi Friends,
I have a problem in sending mail through dynamics actions . In this we pass a subroutine in dynamics actions which send an mail when promotion action occured.
Problem is that sometimes it will send an mail or sometimes not. I have no idea to solve this problem.
Can anyone suggest me .
Thanks ,
Anish
Moderator message : Duplicate post locked. Continue with thread [send mail through dynamic actions|send mail through dynamic actions].
Edited by: Vinod Kumar on Sep 5, 2011 10:19 AM

this is where i created the keystore.jks file
I navigated to the location C:\Program Files\Java\jdk1.6.0_13\bin in command prompt and typed the following command to create the keystore
keytool -import -trustcacerts -alias root -file mail_test_com.crt -keystore keystore.jksI was asked to set the password for keystore and then i was asked the question "Trust this certificate? [no]:" for which i gave yes.
If this is not the right place to create the keystore.jks can you please tell me what is correct location to create the keystore file.

About send mail through Outlook Express

I send mail through outlook . but system shows "your server has been terminate suddently. The possible reasons include servers error , NetWork error or long time among inactive status ." I promise the setting of POP3 and SMTP is right. Who can help me ? thank you.

I would start first with, do you know that the smtp setting for your server actually points to a Sun Java Enterprise Messaging Server?
what do you get on a command line when you do:
telnet <what you have for smtp> 25
?

Sending Mail through Outlook using PL/SQL

I have installed Oracle 9i (9.2.0.1) on Windows Xp with SP 2 platform. My MS Outlook has been configured.
How could i send mail through Microsoft outlook by using PL/SQL Program.

How could i send mail through Microsoft outlook by using PL/SQL Program.Nonsensical question. MS Outlook is a mail client. A PL/SQL program is also a mail client.
Both these need to talk to a mail server. It does not make sense for one mail client to "+talk+" to another client for passing it e-mails that need to be send.
The mail client talks to a mail server using the SMTP ( Simple Mail Transfer Protocol ). There are also other protocols such as IMAP (open standard) and MAPI (Microsoft proprietary).
Oracle's PL/SQL environment by default supports SMTP via the UTL_SMTP, and UTL_MAIL packages - these provide the PL/SQL developer with an interface to use to send e-mails.
MS Outlook (client) does not feature anywhere in this regard, whereas MS Exchange as a mail server will (assuming it is being used on your network).

Problem in sending mail through dynamics actions

Hi Friends,
I have a problem in sending mail through dynamics actions . In this we pass a subroutine in dynamics actions which send an mail when promotion action occured.
Problem is that sometimes it will send an mail or sometimes not. I have no idea to solve this problem.
Can anyone suggest me .
Thanks ,
Anish
Moderator message : Duplicate post locked.
Edited by: Vinod Kumar on Sep 5, 2011 9:45 AM

Hi,
Check that all the bindings have been done in proper way as it is configured.. Try to do the binding manualy..This could also be the problem..
thank You

Problem in sending mail through workflow

Hi All,
I am trying to create a workflow. I created a workflow and once document is made, this workflow trigerrs and i am able to get user decision to my user id. once if i click on approve, mail should be triggered to my mail id. but mail is not coming to my mail id. i checked in SOST transaction, <b>mail status set to Transmitted.</b>, and not as sent .
But i tested a sample test message from sbwp to my mail id and it is working fine. Only through workflow, sending message to outlook is not working. i checked my user in the system in SU01 transaction also, there also mail id is mentioned. what could be reason for not able to send mails through workflow.?
Its urgent.
Points will be awarded to all.
Regards,
vinoth

Hi,
Check that all the bindings have been done in proper way as it is configured.. Try to do the binding manualy..This could also be the problem..
thank You

I am not able to send mails through Yahoo APP.It gives me an error msg :"the sender address has ben rejected by the server ".I tried adding username and password in the SMTP server settings,But those optiopns are greyed out.

I am not able to send mails through Yahoo APP. It gives me an error msg :"the sender address has ben rejected by the server ".
I tried adding username and password in the SMTP server settings,But those optiopns are greyed out.
So, i am not able to enter anything in fields under SMTP server settings

You probably have changing settings disabled in Restrictions.

How do I send mail link this page with iCloud

I'm having problems sending mail link from safari with iCloud please.
Please help

There is an option to "Send Link..." in the File menu. Firefox does not have a built-in send page by email option.

Sending mail through "local" mail server?

I've set up fetchmail and procmail to download (and delete) mail from my mail host to a ~/Maildir on a server in my home which I then access through dovecot IMAP.
I want to be able to send mail "through" my server too, instead of going straight to my host's smtp. Maybe there isn't any good reason to do this? I want my Sent mail to be stored on my local server. And if set up more than one mail account, it would have to use the right smtp depending on the email address.
Anyone know how they would go about it? I found a handful of dovecot/fetchmail articles, but none that mention sending mail really. There's an oldish looking wiki article on exim, but I feel like I shouldn't need to use system wide conf for this.

Dovecot and fetchmail only handle the mail coming to you (ie, IMAP/POP3). You need SMTP to send email.
I highly recommend Postfix, and set it up to use your ISP's mail server as relay_host

Send mail through CL_BCS class with normal priority

Similar Messages

Maybe you are looking for