Send mail to group--not happening...

I've set up a group in Address Book.
Then when I try to send a message to them, all names of the group appear in the TO: section of the mail header....but then only one person out of the group actually gets sent the mail.
Odd...is this a bug or am I not doing something correctly.

As a first step I would delete the group in AB, recreate it and test again.
let me know if you get the same behavior.

Similar Messages

Has anyone found a solution to sending mail to groups in Mavericks? I've been given 2 approaches - 1 to type user name group into address and the other to go to address book and right click on group. Neither are satisfactory. Does anyone have a solution?

Has anyone found a solution to sending mail to Groups in Mavericks? I've been given two solutions - neither are satisfactory. One is to type name of group into address line, the other is to go to address book and right click on group.

thanks a lot for your kind help... saved me a lot of time and effort, could not believe it at first that the process is so simple but once i followed the steps it worked fine. appreciate your help.

Cannot Send Mail - You did not specify any recipients

Hi all,
I have an email stuck in my outbox which has the "This message has not been downloaded from the server" issue I have seen on this forum. Everytime I go to my email folders list, I get the 'Cannot Send Mail - You did not specify any recipients' error message. I am unable to trash it, move it as I get the 'Unable to Move Message' error.
Any ideas how I can remove this message and clear my outbox!?
Thanks,

Me too! This is very annoying. I LOVE Apple but this new 3G keeps on throwing curveballs at me. I, too, deleted my e-mail account from my iPhone to get rid of this "unsent message" but with Apple you shouldn't have to do that! Certain that it will happen again, I'm interested if anyone comes up with any fixes so that next time we don't have to delete/add e-mail account.

3GS 3.0.1 - Cannot send mail, You did not specify any recipient

Whenever I send a message from iPhone with MobileMe account and then resync the account with server (Push is off), the very same message, already sent with success, appears in Outgoing folder and error pops up saying:
*Cannot send mail, You did not specify any recipient*
See the picture below:
http://gitarzysta.com/iphone/error1.jpg
It cannot be deleted, either - error message pops up saying: *Unable to move message*
http://gitarzysta.com/iphone/error2.jpg
Important: it was sent and received successfully. It is just either iPhone, MobileMe or both that have problems to sync correctly.
On my Mac that I sync with this MobileMe account all is fine.
What can be wrong? There was an old topic here, from 2008, where several users of 3G had exactly the same issue, but no root cause or solution was provided.
Thanks!
Message was edited by: gitarzysta

Try deleting and manually recreating the account on your iPhone.
If you transferred the account settings from your Mac via the iTunes sync process - selected under the Info tab for your iPhone sync preferences with iTunes, deselect this for your iPhone sync preferences followed by selecting Apply before doing so.

'Error Sending Mail :send_mail.ksh: not found'

Hi all,
com/btw/pricemaker: under this directory i have kept all the required class files and also the shell script.
R_ConcatenatorRatingComponent.class
InputProcessor.class
InputProcessor$FilesHandler.class
InputProcessor$BatchStringTokenizer.class
send_mail.ksh
set_mail_details.ksh
OutputGenerator.class
and i created a jar file
$jar -cf pmbtw.jar com
when i run the prog i am getting the above specified error.
Can any please help me.

I wrote a function in java to send a mail ,
if (emailFile.exists())
            sendMail(emailFile.getAbsolutePath());
public void sendMail(String filePath)      {
       String mailIds = "[email protected]";
       String from = "[email protected]";
       try{
            String sub="<PM>:Alert there are some data mismatch in the file";
                  //subject=subject.replace(' ','~');
             String body = "These are the records in which NTSCLI Rate is greater than or equal to VOIP rate.";
               //body=body.replace(' ','~');
             String exec_command = "send_mail.ksh "+subject+" "+body+" "+mailIds+" "+filePath;
                          Process p = Runtime.getRuntime().exec(exec_command);
               int exitVal=p.waitFor();
               if (exitVal != 0)
                    System.out.println("Error Sending Mail: script was not executed");
          catch(Exception e)
              System.out.println("Error Sending Mail: " + e.getMessage());
     }please any one help me :-(

Out of office message when sending mail to Lotus Notes from SAP

Hi,
Is it possible to have an 'out of office' message when sending mail to Lotus Notes from SAP?
I'm sending account statements by mail via a modified version of function FI_OPT_ARCHIVE_CORRESPONDENCE. The SAP username is send as a parameter, and later converted to the e-mail saved in the user profile. This works, - but I would like to have an out of office reply if the user I send to is out of office.
Hope someone can help...
Regards,
Lene

As Thomas pointed out, you can use regular SMTP mail to send the contents to Lotus Notes. You can use the function module SO_OBJECT_SEND or any of the SAP Office function modules to do this.
Only thing to remember is that the SMTP may have been disabled by your basis team due to security risks involved. An alternative could be a lotus notes connector available from IBM.
Srinivas

Cannot send mail - server does not allow relaying

I keep getting a sporadic error message on my ipad: "cannot send mail. The recipient was rejected by the server because it does not allow relaying". Sometimes it doesn't happen and the mail sends fine. Sometimes I get the error message but the message then sends later. Sometimes it never sends.
Can anyone help?

Hi, I've suddenly encountered this problem. I have a 1st gen iPad. I've reset, deleted, re-added, turned on both outgoing servers, added my password--this last doesn't stay in the primary outgoing server field; when I go back in, the password field is filled with the (optional) text again and when I 'click' into the authentication box, the password is no longer checked. However, these are all filled in the secondary outgoing server, so it shouldn't matter. Restarted the iPad a couple times. Using system 5.1.1--I think that's as far as I can go. Any miracles out there?

Send mail to group

Having trouble in Snow sending mail to a group. No trouble before Snow, now groups won't go into "to" with new mail when clicked. Any ideas?

Thanks for your help with this. Doing as you suggested didn't work any differently, however it seems there isn't really a problem after all.
I'm a little embarrassed and sorry to have wasted your time.
I have created a dummy test group and done some experiments. It seems Apple have changed the way it works: Where before I could see a list of email addresses and edit them if I needed to, all I now see is the name of the group and there is no way to edit them.
So forgive me for thinking it wouldn't work, but I couldn't experiment with the real group and risk it going wrong!
I have no idea how they (Apple) are doing it but the names of the recipients don't seem to appear anywhere in the email header...
+Mime-Version: 1.0 (Apple Message framework v753.1)+
+To: Test Group+
+Message-Id: <[email protected]>+
+Content-Type: multipart/signed;+
+ micalg=sha1;+
+ boundary=Apple-Mail-25-164972374;+
+ protocol="application/pkcs7-signature"+
+From: "xxxxxx.co.uk" <[email protected]>+
+Subject: test email to group 002+
+Date: Sat, 19 Sep 2009 09:47:58 0800
This is annoying because I cannot now tailor the list of recipients. In the past I used to be able to weed out people who were legitimately in the group but shouldn't receive the email.
Not sure If they have done this for some oddly perceived security reason: I used to Apple-X the addresses from the To: field, and Apple-V them into the Bcc: field, so recipients couldn't see the whole list of addresses or "Reply to all". Surely this was enough for the vast majority of users.
Thanks again for your time.

Send mail via WLAN not possible

Whenever I try to send mails while being connected via WLAN, Apple Mail tells me that it cannot connect to the relevant smtp server opening a window to choose another one.
This is NOT happening when I am connected to the web to the SAME NETWORK or any other network but just via cable.
When I try to send mails while being connected to the web using my Vodafone UMTS card the same happens.
I always use the same mail accounts and settings thererof.
Receiving mails is no problem, browsing the web no problem.
Any idea

Most if not all ISPs used for connecting to the internet block the use of SMTP servers that are outside of their network (or not provided by the ISP) on Port 25 which is the most common and default port used for all SMTP servers.
Some ISPs allow the use of an authenticated SMTP server only (such as the .Mac and AOL SMTP servers) on Port 25 but some block its use regardless.
This is entirely left up to an controlled by the ISP used for connecting to the internet at the time.
Go to Mail > Preferences > Accounts and under the Account Information tab for your .Mac account preferences at the SMTP server selection, select the Server Settings button below for the .Mac SMTP server.
Enter 587 in place of 25 in the Server Port field and when finished, select OK to save the changed settings.
Test if this resolves the problem which it should since you are able to send messages with your AOL account and authenticated SMTP server which also used Port 587 for the Server Port.
Go to Mail > Preferences > Accounts and under the Account Information tab for your AOL account preferences at the SMTP server selection, select the Server Settings button below to confirm the AOL authenticated SMTP server is using 587 for the Server Port.

Sending mail to group... help!

I have created a group in Address Book... Some of the people have two or more email addresses in Address Book (home, school, work, etc.). When I go into Mail, and put the group in the "To:" box, all the names appear... but Mail automatically defaults to the first email listed for each person. Instead of selecting each person in the message, can I easily set the "primary" email address for each person. For example, I want my particular group to only send to the ".edu" addresses of each person. How can I easily change this?
Thanks for the help!

Copied from Address Book Help.
If group members have multiple email addresses, you can choose which address you want to use when sending mail to the group. Select the group, then choose Edit > Edit Distribution List. Select which of the members' addresses you want to use.

Sending mail to GROUP ID when a process chain fails.

Hi All,
Can one suggest me, how to send a failure/success mail to a Group mial id when a process chain fails.
I am awere about sending mails to individual mail id's when a any process fails or succed. I want to know the group ID creation part & how to tag the same SOCT.
Thanks in advance.
BR,
Kiron.

hi,
The Distribution List/Group_id is created in SO23 transaction.
hope it is helpful to u
thanks

Sending mail to LOTUS NOTES inbox.

Hi all,
I am working on WORKFLOWS and i need to send a mail to lotus notes inbox. I have got the function module to send the mail.I Created a method for sending the mail. But Where and how to impletement this method in the work flow.
Please through some light on this.
Regards,
Gautham

As Thomas pointed out, you can use regular SMTP mail to send the contents to Lotus Notes. You can use the function module SO_OBJECT_SEND or any of the SAP Office function modules to do this.
Only thing to remember is that the SMTP may have been disabled by your basis team due to security risks involved. An alternative could be a lotus notes connector available from IBM.
Srinivas

Send mails via Lotus Notes using VFP

Hi all,
I have an VFP application which is allowing send emails from Lotus Notes. Currently it sends mails from the default account in Lotus notes. But now there is a requirement as follows.
An email address can be defined from our application. Say
[email protected] Lotus notes has been configured with two mail accounts such as
[email protected] and [email protected] and the default email is
[email protected] Now we have to send emails from our application with
[email protected] email address. Not the default email address.
To do this we have to read all email accounts configured in Lotus Notes using VFP. And look for the email address
[email protected] and mail should be sent with that account. Can anybody guide me how to do this using VFP? Thanks.
Best Regards,

This is actually a Notes question. You need to find out whether the Notes automation server provides what you need and how to do it.
Tamar

Can JavaMail send mail to Lotus Notes?

Can JavaMail send e-mail to Lotus Notes?
If I can't, is there any alternative method?
I need it for my J2EE project.
Thanks!!
Dan. :)

Cann you explain how?
Can you put an example?
Thanks in advance.

Send Mail icon is not "live."

The "send mail" icon on my new MacBook Pro (10.5.1) is grayed when I try to send a message. I recently transferred my applications and settings from my iMac (10.4.11) to the MacBook Pro via firewire...wondering if that might be the problem. No problems receiving mail on either machine and no problems sending mail on the iMac.
Anyone have a similar problem and, hopefully, a solution?
PH

Here is the script I get when I try to repair permissions...which took quite a while to generate. Unfortunately, I haven't a clue what all this means, if anything, but I still can't send mail. PH
Repairing permissions for “MacBook Pro HD”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
ACL found but not expected on "System/Library/User Template/English.lproj/Sites".
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
ACL found but not expected on "System/Library/User Template/English.lproj/Desktop".
ACL found but not expected on "System/Library/User Template/English.lproj/Documents".
ACL found but not expected on "System/Library/User Template/English.lproj/Downloads".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Application Support".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Assistants".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/MIDI Drivers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Components".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Digidesign".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/VST".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Alerts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Banks".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/ColorPickers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Compositions".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Favorites".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/FontCollections".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Fonts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Plug-ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Sound Effects".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Input Methods".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Internet Plug-Ins".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Keyboard Layouts".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Preferences".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Printers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Screen Savers".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Sounds".
ACL found but not expected on "System/Library/User Template/English.lproj/Library/Voices".
ACL found but not expected on "System/Library/User Template/English.lproj/Library".
ACL found but not expected on "System/Library/User Template/English.lproj/Movies".
ACL found but not expected on "System/Library/User Template/English.lproj/Music".
ACL found but not expected on "System/Library/User Template/English.lproj/Pictures".
ACL found but not expected on "System/Library/User Template/English.lproj/Public".
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/lib/jvm.cfg", should be 0, user is 95.
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Libraries/classlist" , should be 0, user is 95.
Permissions repair complete

Send mail to group--not happening...

Similar Messages

Maybe you are looking for