Send mail via web server
Dear Sir,
We have application servers who need to send mail to a pair of web servers, which are behind two 11501. And then the web server will lookup DNS and send the mail to the Internet.
We can ping between application servers and web servers without any problem.
But, we find that, from the application server, we CANNOT send mail to the real ip of the individual web servers. I think the reason is the return IP is changed to vip.
However, with content rules of port 25, from application server, we CAN send mail to the vip (of the two web servers), which CAN then forward the mail to each web server in round robin successfully. The short coming of the setup is the 11501 cannot failover if the smtp deamon of one of the web servers down. That means, smtp (mail service) has no resilience.
Is there any way that we can send mail from the application servers to the real ip of the web servers? In that case, resilience will be retained as UNIX sendmail will check the availability of smtp deamon.
Thanks.
I did not configure any ACL.
And we have routes, which points all traffic (from outside) to the real IPs to the external VLAN. But it seems only ping is working. Other applications such as like SSH cannot make connection to real IP of the web server successfully.
However, the web server can ssh to servers of external network.
Any idea? Many thanks!
Similar Messages
-
I send mail via SMTP server with Hebrew text, and I get it gibberish on my iphone
I send mail via SMTP server with Hebrew text, and I get it gibberish on my iphone
What mail program from what kind of computer are you sending your email? It sounds like an encoding problem that would have to be solved on the sending end. If you want, send me an example of the kind of email which arrives as gibberish on your iphone (tom at bluesky dot org).
-
Can not send mail via the server no webmail no smtp relai
*relai host username and password is set correct:*
log:
Sep 8 22:00:07 macserver postfix/smtp[4939]: warning: SASL authentication failure: No worthy mechs found
Sep 8 22:00:07 macserver postfix/smtp[4939]: CD63667854: to=<[email protected]>, relay=smtp.1und1.de[212.227.15.167]:25, delay=2.1, delays=0/0.07/2/0, dsn=4.7.0, status=deferred (SASL authentication failed; cannot authenticate to server smtp.1und1.de[212.227.15.167]: no mechanism available)
*I did not understand that??!!*
*with my old server 10.5 this does run perfect*I use Apple Mail. Since I upgraded to 10.6.1 my mailboxes go offline without reason. I have smtp problems although all settings are OK. When will all those problems be fixed by Apple?
-
Can not send mail via the server 7 no webmail no smtp relai
*relai host username and password is set correct:*
log:
Sep 8 22:00:07 macserver postfix/smtp[4939]: warning: SASL authentication failure: No worthy mechs found
Sep 8 22:00:07 macserver postfix/smtp[4939]: CD63667854: to=<[email protected]>, relay=smtp.1und1.de[212.227.15.167]:25, delay=2.1, delays=0/0.07/2/0, dsn=4.7.0, status=deferred (SASL authentication failed; cannot authenticate to server smtp.1und1.de[212.227.15.167]: no mechanism available)
*I did not understand that??!!*
*with my old server 10.5 this does run perfect*I second That...
Please give us a hint! -
Sending mail via forms no longer working
Recently, on one of our servers (XServe G4 - 10.3.9) was running both web and mail. Mail was moved off of the server 2 days ago onto a newer server (10.4.7)
The web server has: php4.3.11 and is ONLY running AFP/OD/Web
Since the transfer of the mail server to the new machine, all web sites can no longer send mail via their scripts (either by sendmail, php's mail(), or by connecting to SMTP server via php).
The web logs do not show errors when it attempts to send the mail...
A look at mail.log shows
"relay=cyrus, delay=2558, status=deferred (temporary failure. Command output: couldn't connect to lmtpd: Connection refused_ 421 4.3.0 deliver: couldn't connect to lmtpd_)
As far as I'm aware, the web server/sendmail shouldn't be attempting to use cyrus at all. For the record, Cyrus master is not running.
All users can access the mail server without any difficulty. DNS entries have been checked and double checked.
Does anyone know why sendmail and php mail functions stopped working? I really need to get these web forms functioning again. Is the problem with apache, php, sendmail or something else?Hi Camelot,
Thanks for the quick reply and useful suggestion. I did as you mentioned and fired up the mail server.
The mail "delivered" however, I notice a couple issues in the logs (mail.log)
issue #1: I have to start cyrus master manually via > sudo /usr/bin/cyrus/bin/master SA and command line start/stop of mail does not start master. Also, when starting master from command line as mentioned, terminal hangs.
issue #2 (from mail.log) - still getting the same lmtpd error (but messages do finally get delivered):
Jan 14 03:58:24 www postfix/pipe[2914]: 3503858502D: to=<[email protected]>, relay=cyrus, delay=5327, status=deferred (temporary failure. Command output: couldn't connect to lmtpd: Connection refused_ 421 4.3.0 deliver: couldn't connect to lmptd_ )
Jan 14 03:59:39 www postfix/cleanup[2906]: B60AE58572B: to=<[email protected]>, relay 123.123.123.123[123.123.123.123], delay=0, status=sent (250 Ok: queued as 9FBF41BCBCA)
Do you think these are "issues" to contend with or are they "normal" occurances? -
hi all,
i have a problem in sending mail via bsp.
the case is i want to send reminder from e-portal. in order to do that i made a new bsp page and a new function modul.
the bsp page is used for user interface and the function modul is used for the process for sending mail.
in the function modul i send the mail via api.
the bsp page and function modul is already finish. but when i testing them, the mail is not sent into mail inbox.
if i checked in sap outbox, the mail sent via bsp is exists.
i try to debug it the code for bsp page and function modul is already ok, no error occured.
is there any clue why this happened ?
is there any thing else that need to be config or set ?
please help
regards
eddhiehi Raja,
i have solved the problem sending mail via bsp.
many thanks for your help, i rewards point for your answer.
about the sap notes that you told me before, is it the way for setting how to send mail / messages via web application server right ?
could please you give little explaination for the notes, because i think 80% of the notes is for basis configuration and i don't have authorization.
beside that, what i have to do if in transaction SCOT there is a lot document still waiting for transmitted ?
please help
regards
eddhie -
Having been on Thunderbird for some years I have suddenly got the following message when trying to send mail.
An (SMTP) error occurred while sending mail. The server responded: Requested action aborted: This mail account has sent too many messages in a short amount of time. Please try later..
I have checked the SMTP server settings in tools, account settings and they are as they have always been. Is there something I have missed?Sending through web mail is totally irrelevant to using an SMTP server. The message even says it is from the server. Why do you think this is a Thunderbird problem.
The provider has put in place measures to keep people from spamming other email recipients using thier SMTP server. You have seen the result of those measures. -
Surname not recognized when sending mail via FM
Hi SDN,
I am on WAS 6.20. SRM System.
I have a BSP, which sends mail via FM SO_NEW_DOCUMENT_ATT_SEND_API1.
when putting a normal dialog user in the ICF Service of the BSP I get a mail in my email client, which shows as sender the forename, surname of the corresponding SU01 SAP User. When putting service user in the ICF service the sender, which shows up in my email-client is always 'www' even though I changed fore- and surname of this service user. Why is that?
regards, matthias
Message was edited by: Matthias Kasig
Message was edited by: Matthias KasigI am with you. I think they still have a dud server in their farm and when you get it you get the error message. How to get to level two support is the trick I think.
-
Im Apple Mail using iMac G4 and G4 tower. Both will recieve an send mail find via dial-up but will not send mail via dsl connection.
We get our mail via ethernet > router > antenna > atenna > another router > antenna > ten miles away at another antenna then to dsl source.
So our dsl connection/signal is going threw three other antennas and at least one router here in office before we get it.
My ISP provider says we need to talk to our DSl provider.
Any ideas? Our computer tech is out of office touch for a week.
RanThanks but this doesn't answer my question.
Allan, I am 99% percent sure that my ISP is not the same ones who supply our ethernet/broadband/DSL.
Is your internet service provider (ISP) for your
dial-up connection different from the ISP for the DSL
connection?
Yes, I believe that they are differrent, however, I have new info.
At first my G4 tower with Earthlink account would not send out over etherner/broadband/DSl, but now it does! I, nor anyone else, has made any changes to the outgoing address that works for dial-up connection and is what we have always used until yesterday when we first tried the dsl/braoband
Kind of a different situation and not typical or the
norm to have a company that provides a DSL connection
not be the internet service provider for the
connection.
Someone new came into our building for office space. He had the router, ethernet cables and antenna installed. He/we get electro-magnetic radiational signal from a larger business across the street who has a tower --soon to be a taller tower-- and they get there radiational signal from 10 miles away.
Knowing who your ISP is for connecting to the
internet regardless if using a dial-up connection or
a DSL connection (DSL is considered a broadband) is
important and if the email account and SMTP server
being used is provided by the ISP being used for your
internet connection or by a different email account
provider not associated with the ISP used for
connecting to the internet.
Yes, I understand that is the case. Maybe I'm wrong and by some coincidence the DSL provider is Earthlink and that is why the G$ tower account began working for the outoging mail.
Im still having the sam problem on the G4 iMac which is a local.com account they have told us the same as you have, that we need to know who the DSL provider is and what info they require in the outgoing( smtp ) line.
You mentioned Earthlink which is an internet service
provider that offers dial-up access and/or DSL access
so does the Earthlink protocol you mentioned mean you
are having problems sending with an Earthlink email
account and SMTP server?
Earthlink account is working now so again perhaps the DSL provider is coming through Earthlink and ergo we didnt need to make changes to the outgoing( smtp ) info line.
Thats the only way that one can be explained.
I take it you use the dial-up connection at home
(which is provided by Earthlink?) and the DSL
connection is used at the office?
Thats correct. The inital DSl source for the business that is 10 miles away, must use Earthlink. I'm now presuming this is the case with this new info.
However, there is another --3rd-- business on other side of street and he uses --Apple mac just like me-- and his ISP is "host centric". I looked at his mac preference accounts outgoing ( smtp ) line and his is
"mail.the business name.com:his email address",
i.e. he does not use Earthlink but he has no problem sending out mail via the same DSl/broadband connections we have
The only reason he has his address in the outgoing mail liine is bceause he too is in larger business building with several differrent computers and email address's.
I've tried all kinds of combinations that are similar to the Earthlink outgoing and the hostcentric outgoing
but none work for the local.com account.
The exact error message provided when trying to send
messages is also pertinent information.
"message delivery failed" "the attempt to read data from the server 'server-name' failed"
Then it gives me option to try differrent server names.
Thanks for your efforts Allan and ohters.
Ran -
Greetings O Wise Ones,
The smtp setting are correct. I can receive mail. The mail app was working fine one minute and the next I couldn't send mail. Tried a new smtp and it didn't work either, Created a new login user and new mail. The smtp work with the new user but not with the old one. Any ideas that don't delete the com.apple.mail.plist? If that's the only way. How do I save my mail boxes?This is happening to my wife's Leopard 10.5.8 upgraded machine right now.
We've been using Apple Mail for years and it works, but suddenly stopped working
and refuses to send mail via any SMTP server at all. It just spins forever and eventually
complains it can't.
The account is configured to send via comcast (smtp.comcast.net), DSL (smtp.sbcglobal.yahoo.com), and gmail, as choices. Two of them require authentication, Comcast doesn't require authentication, only that the e-mail be sent via the Comcast cable router, which it is.
I've tried removing the SMTP accounts and carefully re-adding, removing the Gmail IMAP mail account itself in Apple Mail and re-adding, and even moving aside the /Users/<user/Library/Mail folder so it can be re-added. I've even used the sqlite3 index vacuum command.
On my own Mac Pro, 10.5.8, I'm able to send e-mail, but on the notebook mail is wedged up for good and it seems to be associated with the upgrade. I am now re-installing 10.5.8 from the 'combined' download, and I'll see if it fixes it. What a hassle. -
Send mail from windows server 2008
Hi all,
I have developed one web application on windows xp platform, which will send mails on request (using javamail api).
But it is not able to send mails from windows server 2008, what should I do .. ?
Thanks & Regards,
AbelThanks for reply.
Here my answers for above questions :
The web application which is deployed in the server is not able to send mails.
I'm not getting any exceptions.
I don't know what the protocol trace show.
I don't know how to debug my application, which was working fine in my development environment,but giving error result(not working fine in deployed system).
Regards,
Abel -
HT6114 Why would i lose the ability to send mail via my mac? smtp is offline
Why would i lose the ability to send mail via my mac? smtp is offline and cannot get it to respond. I have web mail with o2, which is working fine, and i can send and receive on my iPhone!! yet i cannot send on any of the four accounts i have via mac?
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages -
I cannot send mail rejected by server does not allaow relaying
Im having trouble sending mail. The server doesnt allow relaying
If you are having trouble sending mail and all of the following are working properly:
Data connection
Wi-Fi connection
Cellular service
Then the issue probably lies with you SMTP server, even though these steps can be redundant i would try the Following:
1. Try toggling airplane mode on for 30 seconds, then turn it off-Test mail
2. Restard the phone-Test mail
3.If using wi-fi connection disconnect/reconnect(if it still doesnt work) try forget all network settings, then reconnect to the network once again.
4.If none of those work, depending on who you e-mail service provider is, it may be an issue with their servers and i would contact them to check. -
SMICM error while sending mail using SMTP server
Hi All,
We are not able send mails using SMTP server.
We have made every settings necessary in SCOT, SO16 , SMTP service is activated, default domain is maintained etc
Only things which seems to be wrong is in SMICM trace file.
[Thr 13] *** ERROR => NiBufIConnect: non-buffered connect pending after 5000ms (hdl 29;10.26.24.44:1090) [nibuf.cpp 4608]
[Thr 13] *** WARNING => Connection request from (0/1/0) to host: 10.26.24.44, service: 1090 failed (NIECONN_REFUSED)
[icxxconn_mt.c 2321]
This error is getting repeated in it.
BUt I am not sure why it it trying to hit 10.26.24.44, as we dont have any server by this ip. The ip is only not resolvable from the server.
1 more thing, at OS level, following parameter is maintained in profile :
icm/server_port_1 = PROT=SMTP,PORT=25000,TIMEOUT=180
But in SCOT, under SMTP node PORT is given as 25.
Kindly let me know what going wrong here?
Thanksalso getting error as follows
Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.Mail.SmtpException: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1
Authentication Required. Learn more at
at System.Net.Mail.MailCommand.CheckResponse(SmtpStatusCode statusCode, String response)
at System.Net.Mail.MailCommand.Send(SmtpConnection conn, Byte[] command, String from)
at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
at System.Net.Mail.SmtpClient.Send(MailMessage message)
at ST_c121e07caaa94c21bb1355d4f753112f.vbproj.ScriptMain.Main()
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript() -
EEM sending mail by authenticated server
Hi,
we use EEM 3.2 to send email whenever interface goes down/up. But it doesnt work.
We need to use authenticated SMTP server, so command for sending mail is following
action 1.0 mail server "cisco:[email protected]" to "[email protected]" from
"[email protected]" subject "something"
But it doesnt work. Log is following
Mar 22 12:55:34.316: %HA_EM-6-LOG: INTERFACE_CHANGED_STATE : DEBUG(smtp_lib) : smtp_connect_attempt: 1
Mar 22 12:55:34.333: %HA_EM-6-LOG: INTERFACE_CHANGED_STATE : DEBUG(smtp_lib) : smtp_read 220 relay2.domain.local HE relay mail server Fri, 22 Mar 2013 13:55:34 +0100
Mar 22 12:55:34.333: %HA_EM-6-LOG: INTERFACE_CHANGED_STATE : DEBUG(smtp_lib) : smtp_write HELO DP-SW1.dp.local
Mar 22 12:55:34.752: %HA_EM-6-LOG: INTERFACE_CHANGED_STATE : DEBUG(smtp_lib) : smtp_read 250 relay2.domain.local Hello [90.185.130.170]
Mar 22 12:55:34.752: %HA_EM-6-LOG: INTERFACE_CHANGED_STATE : DEBUG(smtp_lib) : smtp_write AUTH LOGIN Y2lzY28=
Mar 22 12:55:35.298: %HA_EM-6-LOG: INTERFACE_CHANGED_STATE : DEBUG(smtp_lib) : smtp_read 503 5.5.2 Send hello first.
Mar 22 12:55:35.298: %HA_EM-6-LOG: INTERFACE_CHANGED_STATE : DEBUG(smtp_lib) : buffer no reply code matched: 503 5.5.2 Send hello first.
Mar 22 12:55:35.298: %HA_EM-3-FMPD_SMTP: Error occurred when sending mail to SMTP server: cisco:[email protected]: error in reply from SMTP server
Mar 22 12:55:35.298: %HA_EM-3-FMPD_ERROR: Error executing applet INTERFACE_CHANGED_STATE statement 1.0
Do you have any idea? I changed domain names. I figured out, that when I manually connect to SMTP server and istead of HELO command I use EHLO, it works. Do you think it can be a problem? And how to solve it then?
Any help appreciated.
thanks
JohnLooks like an incompatibility with your SMTP server. If you get a sniffer trace of a working app sending email through this server what is different versus the debug output here?
Maybe you are looking for
-
Can I send a LR5 slideshow from my iMac to my tV via Apple tv?
I created a slideshow in LR5 from a very recent trip. Now I would like to show it on my 50 Inch living room TV ( Samsung with wireless capability). Is this possible. If so, how? If not how does one manage to show a slideshow for friends and family?
-
TS1424 I click on purchase and nothing happens, why?
I click on purchase on a song and nothing happens, or it will just play the song but not purchase it, why?
-
i have garrys mod on steam and i also have counter strike but when i play on servers people have the word error in them its a giant red word and i dont know why also now its purple and black squares please help
-
How to remove stuck optical drive carrier
I'm in the process of replacing a worn out Optical Drive in my 2007 Mac Pro Tower. When I got to the 'remove the optical drive carrier,' the stinker comes out about 3/4 inch and then no further. I don't want to force it of course. Anyone else ever ha
-
Q. about the images that show in a file's preview
Can I change the image that shows in a file's Alias (is that the right term?) ? Let me tell you a bit more about what I mean... I have 2 aliases for 2 files in use at the mo' - 1 is a tiff, created and saved by Grab. At the moment the picture that sh